Iron complexes of facially capping triphosphorus macrocycles

Primary and secondary phosphine piano-stool complexes of the type [eta(5)-CpFeL3]+ (L = phenylphosphine, 3, (alpha-methyl)vinylphosphine, 4, allylphosphine, 5, (2-methylpropenyl)phosphine, 5b, allyl(phenyl)phosphine, 6) are described. The alkenyl phosphine complexes, 5 and 6, react by intramolecular hydrophosphination to give the corresponding [eta(5)-CpFe]+ complexes of 1,5,9-triphosphacyclododecane (12-aneP3R3, 2, R = H), 9 and 10 respectively. Alkylation of the secondary phosphines in 9 is achieved by hydrophosphinations with ethene to give the 12-aneP3R3 (R = Et) derivative 11. These complexes are also obtained by reaction of suitable [eta(5)-CpFe]+ containing precursor complexes with the corresponding free 12-aneP3R3 macrocycle as is the related [eta(5)-Cp*Fe]+ derivative, 8. Direct substitution of acetonitrile in [Fe(CH3CN)6][BF4]2 by 12-aneP3Et3, leads to the macrocycle piano-stool complex, [(12-aneP3Et3)Fe(CH3CN)3][BF4]2, 7. The crystal structures of selected primary phosphine, eta(5)-Cp, eta(5)-Cp* complexes and 7, allow a comparison of steric influences upon key macrocycle ring closure reactions and hence an insight into parameters required for the formation of smaller ring sizes by template based methods.     

Synthesis and coordinating ability of an anionic cobaltabisdicarbollide ligand geometrically analogous to BINAP

The anionic chelating ligand [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]- has been synthesized from [3,3'-Co(1,2-C2B9H11)2]- in very good yield in a one-pot process with an easy work-up procedure. The coordinating ability of this ligand has been studied with Group 11 metal ions (Ag, Au) and with transition-metal ions (Pd, Rh). The two dicarbollide halves of the [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]- ligand can swing about one axis in a manner analogous to the constituent parts of BINAP and ferrocenyl phosphine derivatives. All these ligands function as hinges, with the most important property in relation to the coordination requirements of the metal being the PP distance. [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]-, BINAP, ferrocenyl phosphine derivatives, and other hinge ligands present a range of different PP separations, and consequently different coordination spheres and dispositions around metal cations. To account for these differences, the equation Dphi2 = D02 + 4 R2cos2(90-phi/2) has been developed. It relates the PP distance (Dphi) in a complex with the minimum PP distance (D0) that is characteristic of the hinge-type ligand.     

Gold(III) and platinum(II) polypyridyl double salts and a general metathesis route to metallophilic interactions

Nine new double-salt compounds have been prepared and six crystal structures are reported that demonstrate a general metathesis route to double-salt compounds with metallophilic interactions. The compounds contain [Pt(terpy)X]+ or [Au(bpy)X2]+ cations, Au(III) or Au(I) anions such as [AuBr4]- or [AuCl2]-, and are prepared in water and recrystallized from organic solvents. In all crystallographically characterized cases, there exist metallophilic interactions between cations and anions, demonstrating the power of this general route. In most cases, there exists an unbroken chain of metallophilic interactions through the crystal, forming single-atom-wide wires.     

Formation of novel anionic gold-tin cluster compounds

A straightforward procedure for the formation of mixed metal Au/Sn clusters is presented: reaction of the heteroborate [SnB11H11]2- with phosphine gold electrophiles gave the clusters [Bu3NH]3[{(Et3P)Au(SnB11H11)}3] and [Bu3MeN]4[{(dppm)Au2(SnB11H11)2}2], which were characterised by X-ray diffraction.     

Synthesis, structures and reactions of cyclometallated gold complexes containing (2-diphenylarsino-n-methyl)phenyl (n = 5, 6)

Reaction of (C6H3-2-AsPh2-n-Me)Li (n = 5 or 6) with [AuBr(AsPh3)] at -78 degrees C gives the corresponding cyclometallated gold(I) complexes [Au2[(mu-C6H3-n-Me)AsPh2]2] [n = 5, (1); n = 6, (9)]. 1 undergoes oxidative addition with halogens and with dibenzoyl peroxide to give digold(II) complexes [Au2X2[(mu-C6H3-5-Me)AsPh2]2] [X = Cl (2a), Br (2b), I (2c) and O2CPh (3)] containing a metal-metal bond between the 5d9 metal centres. Reaction of 2a with AgO2CMe or of 3 with C6F5Li gives the corresponding digold(II) complexes in which X = O2CMe (4) and C6F5 (6), respectively. The Au-Au distances increase in the order 4 < 2a < 2b < 2c < 6, following the covalent binding tendency of the axial ligand. Like the analogous phosphine complexes, 2a-2c and 6 in solution rearrange to form C-C coupled digold(I) complexes [Au2X2[mu-2,2-Ph2As(5,5-Me2C6H3C6H3)AsPh2]] [X = Cl (5a), X = Br (5b), X = I (5c) and C6F5 (7)] in which the gold atoms are linearly coordinated by As and X. In contrast, the products of oxidative additions to 9 depend markedly on the halogens. Reaction of 9 with chlorine gives the gold(I)-gold(III) complex, [ClAu[mu-2-Ph2As(C6H3-6-Me)]AuCl[(6-MeC6H3)-2-AsPh2]-kappa2As,C] (10), which contains a four-membered chelate ring, Ph2As(C6H3-6-Me), in the coordination sphere of the gold(III) atom. When 10 is heated, the ring is cleaved, the product being the digold(I) complex [ClAu[mu-2-Ph2As(C6H3-6-Me)]Au[AsPh2(2-Cl-3-Me-C6H3)]] (11). Reaction of 9 with bromine at 50 degrees C gives a monobromo digold(I) complex (12), which is similar to 11 except that the 2-position of the substituted aromatic ring bears hydrogen instead halogen. Reaction of 9 with iodine gives a mixture of a free tertiary arsine, (2-I-3-MeC6H3)AsPh2 (13), a digold diiodo compound (14) analogous to 11, and a gold(I)-gold(III) zwitterionic complex [I2Au(III)[(mu-C6H3-2-AsPh2-6-Me)]2Au(I)] (15) in which the bridging units are arranged head-to-head between the metal atoms. The structures of 2a-2c and 4-15 have been determined by single-crystal X-ray diffraction analysis. The different behaviour of 1 and 9 toward halogens mirrors that of their phosphine analogues; the 6-methyl substituent blocks C-C coupling of the aryl residues in the initially formed oxidative addition product. In the case of 9, the greater lability of the Au-As bond in the initial oxidative addition product may account for the more complex behaviour of this system compared with that of its phosphine analogue.     

Cationic P-S-X cages (X=Br, I)

The first condensed-phase preparation of ternary P-Ch-X cations (Ch=O-Te, X=F-I) is reported: [P5S3X2]+, [P5S2X2]+, and [P4S4X]+ (X=Br, I). [P5S3X2]+ is formed from the reaction of the Ag+/PX3 reagent with P4S3. The [P5S3X2]+ ions have a structure that is related to P4S5 by replacing P=S by P+--X and S in the four-membered ring by P(X). We provide evidence that the active ingredient of the Ag+/PX3 reagent is the (H2CCl2)Ag-X-PX2+ cation. The latter likely reacts with the HOMO of P4S3 in a concerted HOMO-LUMO addition to give the P5S3X2+ ion as the first species visible in situ in the low-temperature 31P NMR spectrum. The [P5S3X2]+ ions are metastable at -78 degrees C and disproportionate at slightly higher temperatures to give [P5S2X2]+ and [P4S4X]+, probably with the extrusion of 1/n (PX)n (X=Br, I). All six new cage compounds have been characterized by multinuclear NMR spectroscopy and, in part, by IR or Raman spectroscopy. The [P5S2X2]+ salts have a nortricyclane skeleton and were also characterized by X-ray crystallography. The structure of the [P4S4X]+ ion is related to that of P4S5 in that the exo-cage P=S bond is replaced by an isoelectronic P+--X moiety.     

Crystal structures of Au2 complex and Au25 nanocluster and mechanistic insight into the conversion of polydisperse nanoparticles into monodisperse Au25 nanoclusters

We previously reported a size-focusing conversion of polydisperse gold nanoparticles capped by phosphine into monodisperse [Au(25)(PPh(3))(10)(SC(2)H(4)Ph)(5)Cl(2)](2+) nanoclusters in the presence of phenylethylthiol. Herein, we have determined the crystal structure of [Au(25)(PPh(3))(10)(SC(2)H(4)Ph)(5)Cl(2)](2+) nanoclusters and also identified an important side-product-a Au(I) complex formed in the size focusing process. The [Au(25)(PPh(3))(10)(SC(2)H(4)Ph)(5)Cl(2)](2+) cluster features a vertex-sharing bi-icosahedral core, resembling a rod. The formula of the Au(I) complex is determined to be [Au(2)(PPh(3))(2)(SC(2)H(4)Ph)](+) by electrospray ionization (ESI) mass spectrometry, and its crystal structure (with SbF(6)(-) counterion) reveals Au-Au bridged by -SC(2)H(4)Ph and with terminal bonds to two PPh(3) ligands. Unlike previously reported [Au(2)(PR(3))(2)(SC(2)H(4)Ph)](+) complexes in the solid state, which exist as tetranuclear complexes (i.e., dimers of [Au(2)(PR(3))(2)(SC(2)H(4)Ph)](+) units) through a Au···Au aurophilic interaction, in our case we found that the [Au(2)(PPh(3))(2)(SC(2)H(4)Ph)](+) complex exists as a single entity, rather than being dimerized to form a tetranuclear complex. The observation of this Au(I) complex allows us to gain insight into the intriguing conversion process from polydisperse Au nanoparticles to monodisperse Au(25) nanoclusters.     

金(Ⅲ)与2, 2''-联吡啶-1, 1''-二氧化物的配合物的合成和性质的研究

合成了金(Ⅲ)与2,2′-联吡啶-1,1′-二氧化物(bipyO_2)形成的三种新化合物:[H(bipyO_2)][AuCl_4]、[Au(bipyO)Cl_2]Cl和[Au(bipyO_2Br_2]Br。用元素分析、摩尔电导、紫外和红外光谱以及综合热分析等方法测定了它们的组成和性质,并对其结构进行了讨论。实验结果表明,三种化合物均为1:1型电解质,化合物(Ⅰ)是bipyO_2与H~+通过氢键形成[H(bipyO_2)]~+阳离子,(Ⅱ)和(Ⅲ)则为bibpyO_2与Au(Ⅲ)直接螯合组成七原子环的混合配体配阳离子[Au(bipyO_2)X_2]~+,X=Cl~-或Br~-。     

Unprecedented luminescent heteropolynuclear aggregates with gold thiolates as building blocks

The reaction of [AuCl(P-N)], in which P-N represents a heterofunctional phosphine ligand, with pentafluorothiophenol, HSC(6)F(5), gives the thiolate gold derivatives [Au(SC(6)F(5))(P-N)] (P-N = PPh(2)py (1), PPh(2)CH(2)CH(2)py (2), or PPhpy(2) (3)). Complex [Au(SC(6)F(5))(PPh(2)py)] (1) reacts with [Au(OTf)(PPh(2)py)] in a 1:1 or 1:2 molar ratio to afford the di- or trinuclear species [Au(2)(μ-SC(6)F(5))(PPh(2)py)(2)]OTf (4) and [Au(3)(μ(3)-SC(6)F(5))(PPh(2)py)(3)](OTf)(2) (5), with the thiolate acting as a doubly or triply bridging ligand. The reactivity of the mononuclear compounds [Au(SC(6)F(5))(P-N)] toward silver or copper salts in different ratios has been investigated. Thus, the treatment of [Au(SC(6)F(5))(P-N)] with Ag(OTf) or [Cu(NCMe)(4)]PF(6) in a 1:1 molar ratio gives complexes of stoichiometry [AuAg(OTf)(μ-SC(6)F(5))(P-N)] (P-N = PPh(2)py (6), PPh(2)CH(2)CH(2)py (7), or PPhpy(2) (8)) or [AuCu(μ-SC(6)F(5))(P-N)(NCMe)]PF(6) (P-N = PPh(2)py (9), PPh(2)CH(2)CH(2)py (10), or PPhpy(2) (11)). These complexes crystallize as dimers and display different coordination modes of the silver or copper center, depending on the present functionalized phosphine ligand. The treatment of [Au(SC(6)F(5))(PPh(2)py)] with silver and copper compounds in other molar ratios has been carried out. In a 2:1 ratio, the complexes [Au(2)M(μ-SC(6)F(5))(2)(μ-PPh(2)py)(2)]X (M = Ag, X = OTf (12); M = Cu, X = PF(6) (13)) are obtained. The same reaction in a 4:3 molar ratio affords the species [Au(4)M(2)(μ-SC(6)F(5))(3)(μ-PPh(2)py)(4)]X(3) (M = Ag, X = OTf (14); M = Cu, X = PF(6) (15)). The crystal structures of some of these complexes reveal different interactions among the metallic d(10) centers. The complexes display dual emission. The band at higher energy has been attributed to intraligand (IL) transitions, and the one at lower energy has been assigned to a ligand to metal (LM) charge transfer process. The latter emission is modulated by the heterometal (silver or copper).     

Toward rational construction of gold, gold-silver, and gold-mercury string complexes: syntheses, structures, and properties of [Au(Tab)2]2L2 (L = I and PF6), {[(Tab)2M][Au(CN)2]}2 (M = Au and Ag), and {[Hg(Tab)2][Au(CN)2]2} [Tab = 4-(trimethylammonio)benzenethiolate

The reaction of AuI with 2 equiv of TabHPF6 [TabH = 4-(trimethylammonio)benzenethiol] in the presence of excess Et3N in dimethylformamide (DMF)/MeOH afforded a binuclear gold(I) complex [Au(Tab)2]2I2.2H2O (1). Anion exchange of 1 with NH4PF6 in DMF gave rise to the more soluble complex [Au(Tab)2]2(PF6)2 (2). Treatment of 2 with K[Au(CN)2] produced a tetranuclear gold(I) complex {[(Tab)2Au][Au(CN)2]}2 (3). Analogous reactions of two known mononuclear complexes [Ag(Tab)2](PF6) (4) and [Hg(Tab)2](PF6)2 (5) with 1 or 2 equiv of K[Au(CN)2] generated one Ag2Au2 complex {[(Tab)2Ag][Au(CN)2]}2 (6) and one Au/Hg complex {[Hg(Tab)2][Au(CN)2]2} (7), respectively. Compounds 1-3, 6, and 7 were fully characterized by elemental analysis, IR spectra, UV-vis spectra, 1H NMR, and single-crystal X-ray crystallography. 1 and 2 have a similar [Au(Tab)2]2(2+) dimeric structure in which the two [Au(Tab)2]+ cations are connected via one Au-Au aurophilic interaction. In the structure of 3 or 6, each of the two pairs of [M(Tab)2]+ cation and [Au(CN)2]- anion is held together via ionic interactions to form a {[(Tab)2M][Au(CN)2]} species (M = Au, 3; Ag, 6). Two such species are further connected by one Au-Au aurophilic bonding interaction to form an uncommon Au(4) or Ag2Au2 linear string structure with three ligand-unsupported metal-metal bonds. For 7, the [Hg(Tab)2]2+ dication and the [Au(CN)2]2(2-) dianion are interconnected by the secondary Hg...N(CN) interactions to form a 1D chain structure. The thermal and luminescent properties of 1-3, 6, and 7 in solid state were also investigated.     

Gold(I) and silver(I) complexes containing a tripodal tetraphosphine ligand: influence of the halogen and stoichiometry on the properties. The X-ray crystal structure of two gold(I) dimeric aggregates

Complexes of the type [Au2(micro-PP3)2]X2 [X=Cl (), Br (), I ()], [Ag2(micro-PP3)2](NO3)2 (), Ag(PP3)Cl (), M3(micro-PP3)X3 [M=Au, X=Cl (), Br (), I (); M=Ag, X=NO3 ()] and Au4(micro-PP3)X4 [X=Cl (), Br (), I ()] have been prepared by interaction between gold(I) or silver(I) salts and the ligand tris[2-(diphenylphosphino)ethyl]phosphine (PP3) in the appropriate molar ratio. Microanalysis, mass spectrometry, IR and NMR spectroscopies and conductivity measurements were used for characterization. and are ionic dinuclear species containing four-coordinate gold(i) and four/three coordinate silver(i), respectively. Solutions of behave as mixtures of complexes in a 2:1 [Au2(micro-PP3)X2; X=Cl(), Br(), I()] and 4:1 () metal to ligand ratio. and react with free PP(3) in solution to generate the ionic compounds and , respectively. Complexes and , with four linear PAuX fragments per molecule, were shown by X-ray diffraction to consist of dimeric aggregates via close intermolecular gold(I)gold(I) contacts of 3.270 A () and 3.184 A (). The resultant octanuclear systems have an inversion center with two symmetry-related gold(I) atoms being totally out of the aurophilic area and represent a new form of aggregation compared to that found in other halo complexes of gold(I) containing polyphosphines. The luminescence properties of the ligand and complexes, in the solid state, have been studied. Most of the gold systems display intense luminescent emission at room and low temperature. The influence of the halogen on the aurophilic contacts of compounds with a 4:1 metal to ligand ratio results in different photophysical properties, while and are luminescent complex is nonemissive. The luminescence increases with increasing the phosphine/metal ratio affording for complexes , without aurophilic contacts, the stronger emissions. Silver complexes and are nonemissive at room temperature and show weaker emissions than gold(I) species at 77 K.     

Water-soluble hydroxyalkylated phosphines: examples of their differing behaviour toward ruthenium and rhodium

The reaction of P(CH2OH)3 (I) and P(C6H5)(CH2OH)2 (II) with RuCl3 in methanol eliminates two equivalents of formaldehyde to yield the mixed tertiary and secondary phosphine complexes all-trans-[RuCl2(P(CH2OH)3)2(P(CH2OH)2H)2] (1) and [RuCl2(P(C6H5)(CH2OH)2)2(P(C6H5)(CH2OH)H)2] (2), respectively. There is a high degree of hydrogen-bonding interactions between the hydroxymethyl groups in 1 and 2, although the phenyl groups of the latter reduce the extent of the network compared to 1. The generation of these mixed secondary and tertiary phosphine complexes is unprecedented. Under the same reaction conditions, the tris(hydroxypropyl)phosphine III formed no ruthenium complex. The reaction of P(CH2OH)3, P(C6H5)(CH2OH)2 and P{(CH2)3OH}3 with [RhCl(1,5-cod)]2 in an aqueous/dichloromethane biphasic medium yielded [RhH2(P(CH2OH)3)4]+ (3), [RhH2(P(C6H5)(CH2OH)2)4]+ (4) and [Rh(P(C6H5)(CH2OH)2)4]+ (5) and [Rh(P{(CH2)3OH}3)4]+ (6), respectively. Treating 5 with dihydrogen rapidly gave 4. The hydroxypropyl compound 6 formed the corresponding dihydride much more slowly in aqueous solution, although [RhH2(P{(CH2)3OH}3)4]+ (7) was readily formed by reaction with dihydrogen. Two separate reaction pathways are therefore involved; for P(CH2OH)3 and to a lesser extent P(C6H5)(CH2OH)2, the hydride source in the product is likely to be the aqueous solvent or the hydroxyl protons, whilst for P{(CH2)3OH}3 an oxidative addition of H2 is favoured. The protic nature of and was illustrated by the H-D exchange observed in d2-water. Dihydrides 3 and 4 reacted with carbon monoxide to yield the dicarbonyl cations [Rh(CO)2(P(CH2OH)3)3]+ (8) and [Rh(CO)2(P(C6H5)(CH2OH)2)3]+ (9). The analogous experiment with [RhH2(P{(CH2)3OH}3)4]+ resulted in phosphine exchange, although our experimental evidence points to the possibility of more than one fluxional process in solution.     

Self-assembly of coordination polymers: evidence for dynamic exchange between oligomers in solution and the isolation of a homochiral decagold(I) oligomer

Reactions of the precursor molecules [Au2(mu-BINAP)(O2CCF3)2], 1a, racemic BINAP, 1b, S-BINAP (BINAP = 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl) with the easily exchanged linear bis(pyridine) ligand 1,2-trans-bis(4-pyridyl)ethylene (bipyen) gave the polymeric complex [{Au2(mu-R-BINAP)0.5(mu-S-BINAP)0.5(mu-bipyen)}n](CF3CO2)2n, 2a, but either the polymer [{Au2(mu-S-BINAP)(mu-bipyen)}n](CF3CO2)2n, 2b, or the remarkable oligomeric [Au10(mu-S-BINAP)5(mu-bipyen)4(kappa1-bipyen)2](CF3CO2)10, 3, respectively. The type of oligomer 3 is a missing link in the ring-opening polymerization of macrocyclic coordination compounds.     

A new series of dinuclear Au(I) complexes linked by diethynylpyridine groups

A series of novel digold complexes incorporating ethynyl pyridine derivatives as a spacer unit, [(R(3)P)Au(C[triple bond]C)X(C[triple bond]C)Au(PR(3))] (R = Ph, X = 2,5-pyridine (1); R = Cy (cyclohexane), X = 2,5-pyridine (2); R = Ph, X = 2,6-pyridine (3); R = Ph, X = 2,5'-bipyridine (4); R = Ph, X = 2,6'-bipyridine (5)), has been synthesised. All the complexes have been characterised spectroscopically and the structures determined by single-crystal X-ray crystallography. The central (C[triple bond]C)(X)(C[triple bond]C) unit is essentially linear for complexes 1, 2 and 4 and kinked for complexes 3 and 5, but only in 1, with the shortest spacer group and the less bulky phosphine ligand, is there evidence of d(10)...d(10) Au...Au interactions (Au-Au 3.351(2) A). The solution UV/visible absorption and emission spectra for all the complexes are similar to those of the free ligands suggesting that the spectra are dominated by pi-pi* ligand-centred transitions and this is confirmed by DFT calculations.     

Ring-opening reactions induced by gold(I) of five- and four-coordinate palladium(II) and platinum(II) complexes containing tripodal or linear polyphosphines

The tripodal ligands NP(3)(tris[2-(diphenylphosphino)ethyl]amine) and PP(3)(tris[2-(diphenylphosphino)ethyl]phosphine), form five-coordinate [Pd(NP(3))X]X [X = Cl (1), Br (2)], [M(PP(3))X]X [M = Pd: X = Cl (4), Br (5), I (6); M = Pt, X = Cl (7), Br (8), I (9)] and four-coordinate[Pd(NP(3))I]I (3) complexes containing three fused rings around the metal. The interaction between Au(tdg)X (tdg = thiodiglycol; X = Cl, Br) or AuI and the respective ionic halo complexes 1-9 in a 1:1 stoichiometric ratio occurs via a ring-opening reaction with formation of the heterobimetallic systems PdAu(NP(3))X(3)[X = Cl (11), Br (12), I (13)], [MAu(PP(3))X(2)]X [M = Pd: X = Cl (14), Br (15), I (16); M = Pt: X = Cl (17), Br (18), I (19)]. The cations of complexes 17 and 18 were shown, by X-ray diffraction, to contain a distorted square-planar Pt(II) arrangement (Pt(P(2)P)X) where PP(3) is acting as tridentate chelating ligand and an almost linear PAuX moiety bearing the dangling phosphorus formed in the ring-opening process. PPh(3) coordinates to Au(I) and not to M(II) when added in excess to 14 and 17. Complexes 14-17 and [Pt(P(4))](BPh(4))(2) (10) (P4=linear tetraphosphine) also react with A(I), via chelate ring-openings to give MAu(2)(PP(3))X(4) [M = Pd: X = Cl (20), Br (21), I (22); M = Pt: X = Cl (23)] and [Pt(2)Au(2)(mu-Cl)(2)(mu-P(4))(2)](BPh(4))(4) (24), respectively.     

The [2,5,12-C3B8H15]- anion, the first representative of the eleven-vertex hypho family of tricarbaboranes

In one synthetic step from the readily available 9-Me(2)SCH(2)-nido-7,8-C(2)B(9)H(11) (compound 1), the first representative of the eleven-vertex hypho family of tricarbaboranes, [2,5,12-C(3)B(8)H(15)][X] (X=[NMe4]+ or [PPh4]+) (compound 2), has been isolated in 32% yield and structurally characterised by single-crystal X-ray diffraction, multi-nuclear NMR spectroscopy, mass spectrometry, and computational methods. Both [NMe4]+ or [PPh4]+ salts of anion 2 were found to undergo degradative conversion to the [hypho-6,7-C(2)B(6)H(13)]- anion (anion 3) in alkaline medium. The [PPh4]+ salt of anion 2 converted quantitatively to the [6-CH3-arachno-5,10-C(2)B(8)H(12)]- anion (anion 4) if passed through a silica column or to the neutral 5-CH3-arachno-6,9-C(2)B(8)H(13) (compound 5) on treatment of its [NMe4]+ salt with dilute HCl. Moreover, the reaction of compound 2 with [RhCl2(C(5)Me(5))]2 afforded the eleven-vertex ruthenadicarbaborane [1-C(5)Me(5)-4-CH(3)-closo-1,2,3-RhC(2)B(8)H(9)] (compound 8). All these reactions resulted in an extrusion of one of the cluster carbon atoms into an exoskeletal position.     

Silylene extrusion from organosilanes via double geminal Si-H bond activation by a Cp*Ru(kappa2-P,N)+ complex: observation of a key stoichiometric step in the glaser-tilley alkene hydrosilylation mechanism

Treatment of Cp*RuCl(kappa2-P,N-2b) (2b = 2-NMe2-3-PiPr2-indene) with TlSO3CF3 produced the cyclometalated complex [4]+SO3CF3- in 94% isolated yield. Exposure of [4]+X- (X = B(C6F5)4 or SO3CF3) to Ph2SiH2 (10 equiv) or PhSiH3 afforded the corresponding [Cp*(mu-P,N-2b)(H)2Ru=SiRPh]+X- complexes, [5]+X- (R = Ph; X = B(C6F5)4, 82%; X = SO3CF3, 39%) and [6]+X- (R = H; X = B(C6F5)4, 94%; X = SO3CF3, 95%). Notably, these transformations represent the first documented examples of Ru-mediated silylene extrusion via double geminal Si-H bond activation of an organosilane-a key step in the recently proposed Glaser-Tilley (G-T) alkene hydrosilylation mechanism. Treatment of [5]+B(C6F5)4- with KN(SiMe3)2 or [6]+SO3CF3- with NaN(SiMe3)2 afforded the corresponding zwitterionic Cp*(mu-2-NMe2-3-PiPr2-indenide)(H)2Ru=SiRPh complex in 69% (R = Ph, 7) or 86% (R = H, 8) isolated yield. Both [6]+X- and 8 proved unreactive toward 1-hexene and styrene and provided negligible catalytic turnover in the attempted metal-mediated hydrosilylation of these substrates with PhSiH3, thereby providing further empirical evidence for the required intermediacy of base-free Ru=Si species in the G-T mechanism. Isomerization of the P,N-indene ligand backbone in [6]+X-, giving rise to [Cp*(mu-1-PiPr2-2-NMe2-indene)(H)2Ru=SiHPh]+X- ([9]+X-), was observed. In the case of [9]+SO3CF3-, net intramolecular addition of the Ru=Si-H group across the styrene-like C=C unit within the ligand backbone to give 10 (96% isolated yield) was observed. Crystallographic characterization data are provided for [4]+X-, [5]+X-, [6]+X-, 8, and 10.     

Charge effects on oxygen atom transfer

The rhenium(V) complex [(HCpz3)ReOCl2]+ ([1]+), the tris(pyrazolyl)methane analogue of the known tris(pyrazolyl)borate complex (HBpz3)ReOCl2 (2), has been prepared. The two complexes are strikingly similar, as are the phosphine oxide adducts [(HCpz3)ReCl2(OPPh3)]Cl ([3]Cl) and (HBpz3)ReCl2(OPPh3) (4), which have been characterized by X-ray crystallography. Comparison of the bimolecular reduction of [1]BF4 and 2 by triarylphosphines reveals a pronounced charge effect, with the cationic species being reduced by PPh3 about 1,000 times faster than its neutral analogue in CH2Cl2 at room temperature. Ligand substitution of the adducts [3]+ and 4 is dissociative, with the cationic complex dissociating phosphine oxide about 56 times more slowly than the neutral compound. The relative impact of charge on ground and transition states in atom transfer reactions is discussed.     

Gold and silver complexes with the ferrocenyl phosphine FcCH2PPh2

Linear gold(I) and silver(I) complexes with the ferrocenyl phosphine FcCH2PPh2 [Fc = (eta5-C5H5)Fe(eta5-C5H4)] of the types [AuR(PPh2CH2Fc)], [M(PPh3)(PPh2CH2Fc)]OTf, and [M(PPh2CH2Fc)2]OTf (M = Au, Ag) have been obtained. Three-coordinate gold(I) and silver(I) derivatives of the types [AuCl(PPh2CH2Fc)2] and [M(PPh2CH2Fc)3]X (M = Au, X = ClO4; M = Ag, X = OTf) have been obtained from the corresponding gold and silver precursors in the appropriate molar ratio, although some of them are involved in equilibria in solution. The crystal structures of [AuR(PPh2CH2Fc)] (R = Cl, C6F5), [AuL(PPh2CH2Fc)]OTf (L = PPh3, FcCH2PPh2), [Au(C6F5)3(PPh2CH2Fc)], and [Ag(PPh2CH2Fc)3]OTf have been determined by X-ray diffraction studies.     

Formation of [PtPd(2)(mu(3)-X)(2)(P-P)(dppmX)(2)](2+) (X = S, Se; P-P = dppe, 2 x PPh(3)) aggregates through activation of the chalcogen-rich [PtX(4)] ring by a Pd(I)-Pd(I) bond

Redox addition of the Pd-Pd bond in [Pd(2)Cl(2)(dppm)(2)] across S-S or Se-Se bond in [Pt(X(4)-kappa(2)X(1),X(4))(P-P)] (X = S, Se; P-P = dppe or 2 x PPh(3); dppm = bis(diphenylphosphino)methane, dppe = bis(diphenylphosphino)ethane) leads to the isolation of [PtPd(2)(mu(3)-X)(2)(P-P)(dppmX-kappa(2)X,P(4))(2)](2+) and represents an atom-economy process that converts chalcogen-rich complexes to heterometallic chalcogenide aggregates. Activation of the [PtX(4)] ring is achieved by tetrachalcogenide reduction and dual oxidation of palladium and phosphine.