Design and Synthesis of 3, 4-Dihydropyrrolo[2, 1-c][1, 4]oxazin-l-one and its 7-Acyl Derivatives

Starting from 1H-pyrrole, unreported 3, 4-dihydropyrrolo[2, 1-c][1, 4]oxazin-1-one 4, 7-(4-chlorobenzoyl)-3, 4-dihydropyrrolo[2, 1-c][1, 4]oxazin-1-one 5 and 7-benzoyl-3, 4-dihydro-pyrrolo [2, 1-c][1, 4]oxazin-1-one 9 were designed and synthesized. They may have antipyretic and analgesic activities.     

Syntheses,Crystal Structures,Visible, and Near-Infrared Luminescence Properties of 3d–4f Coordination Polymers Cu2Er2 and Eu2Ni2

Russian Journal of Coordination Chemistry - Solvothermal condition reaction of Ln(NO3)3 ? 6H2O (Ln = Er, Eu) with 5-nitroisophthalate (Nipt2–) and mononuclear macrocyclic oxamide...     

Densities and apparent molar volumes of atmospherically important electrolyte solutions. 1. The solutes H2SO4, HNO3, HCl, Na2SO4, NaNO3, NaCl, (NH4)2SO4, NH4NO3, and NH4Cl from 0 to 50 °C, including extrapolations to very low temperature and to the pure liquid state, and NaHSO4, NaOH, and NH3 at 25 °C

Calculations of the size and density of atmospheric aerosols are complicated by the fact that they can exist at concentrations highly supersaturated with respect to dissolved salts and supercooled with respect to ice. Densities and apparent molar volumes of solutes in aqueous solutions containing the solutes H(2)SO(4), HNO(3), HCl, Na(2)SO(4), NaNO(3), NaCl, (NH(4))(2)SO(4), NH(4)NO(3), and NH(4)Cl have been critically evaluated and represented using fitted equations from 0 to 50 °C or greater and from infinite dilution to concentrations saturated or supersaturated with respect to the dissolved salts. Using extrapolated densities of high-temperature solutions and melts, the relationship between density and concentration is extended to the hypothetical pure liquid solutes. Above a given reference concentration of a few mol kg(-1), it is observed that density increases almost linearly with decreasing temperature, and comparisons with available data below 0 °C suggest that the fitted equations for density can be extrapolated to very low temperatures. As concentration is decreased below the reference concentration, the variation of density with temperature tends to that of water (which decreases as temperature is reduced below 3.98 °C). In this region below the reference concentration, and below 0 °C, densities are calculated using extrapolated apparent molar volumes which are constrained to agree at the reference concentrations with an equation for the directly fitted density. Calculated volume properties agree well with available data at low temperatures, for both concentrated and dilute solutions. Comparisons are made with literature data for temperatures of maximum density. Apparent molar volumes at infinite dilution are consistent, on a single ion basis, to better than ±0.1 cm(3) mol(-1) from 0 to 50 °C. Volume properties of aqueous NaHSO(4), NaOH, and NH(3) have also been evaluated, at 25 °C only. In part 2 of this work (ref 1 ) an ion interaction (Pitzer) model has been used to calculate apparent molar volumes of H(2)SO(4) in 0-3 mol kg(-1) aqueous solutions of the pure acid and to represent directly the effect of the HSO(4)(-) ? H(+) + SO(4)(2-) reaction. The results are incorporated into the treatment of aqueous H(2)SO(4) density described here. Densities and apparent molar volumes from -20 to 50 °C, and from 0 to 100 wt % of solute, are tabulated for the electrolytes listed in the title and have also been incorporated into the extended aerosol inorganics model (E-AIM, http://www.aim.env.uea.ac.uk/aim/aim.php) together with densities of the solid salts and hydrates.     

Synthesis,Crystal Structure and Reducibility of K2NiF4 Type Oxides Sm2—xSrxCuO4

K2NiF4 type compounds Sm2-xSrxCuO4(0≤x≤1.2)were prepared.Rietveld refinement of powder diffraction data shows that the crystal system of these compounds belongs to T′ type tetragonal structure of space group I4/mmm,and the addition of Sr causes a dramatic shift of the O(I) ions along the c axis from Sm(Sr) toward Cu while scarcely affecting the Cu-O(Ⅱ）bond in basal CuO4 phane.From XRD data,it can be seen that when 0.0≤x≤0.6,Sm2-xSrxCuO4 belongs to a singlephase K2NiF4 type structure,while at x≥0.7,both the free SrO phase and the CuO phase exist in these compounds.From the results of XPS and rietveld refinement,it can be seen that after replacing Sm^3 with Sr^2 of lower valence,the valence of Cu and Sm does not change apparently,and thus some defect must be formed at the oxygen ion positions and/or position A on A2BO4 to keep charge balance and to stabilize the structure.     

Adsorption isotherms of CO2, CO,N2, CH4, Ar and H2 on activated carbon and zeolite LiX up to 1.0 MPa

The adsorption isotherms of CO₂, CO, N₂, CH₄, Ar, and H₂ on activated carbon and zeolite LiX were measured using a volumetric method. Equilibrium experiments were conducted at 293, 308, and 323 K and pressures up to 1.0 MPa. The adsorption isotherm and heat of adsorption were analyzed for two pressure regions of experimental data: pressures up to 0.1 MPa and up to 1.0 MPa. Each experimental isotherm was correlated by the Langmuir, Sips, Toth and temperature dependent Sips isotherm models, and the deviation of each model was evaluated. The Sips and Toth models showed smaller deviation from the experimental data of adsorbents than the Langmuir model. Isosteric heats of adsorption were calculated by the temperature dependent Sips model and are presented along with surface loading. From deviation analysis, it is recommended that the isotherm in the proper pressure range be used to appropriately design adsorptive processes.     

SO4 2−/SnO2: Efficient,Chemoselective, and Reusable Catalyst for Acylation of Alcohols,Phenols, and Amines at Room Temperature

Abstract

SO₄ ^2?/SnO₂ was employed for the acylation of a variety of alcohols, phenols, and amines under solvent‐free conditions at room temperature. This method showed preferential selectivity for acetylation of the amino group in the presence of a hydroxyl group. The reported method is simple, mild, and environmentally viable, using several other acid anhydrides at room temperature.     

Synthesis, crystal structure and electrochemical behavior of supramolecular complex [4, 4′-bipyH2][4, 4′-bipyH]2.5(P2Wl8O62)[4, 4′-bipyH1.5] · 2H2O

A Dawson-type supramolecular complex [4, 4′-bipyH₂][4, 4′-bipyH]_2.5 (P₂W_l8O₆₂)[4, 4′-bipyH_{1. 5}] · 2H₂O (1) has been synthesized hydrothermally and determined by means of IR, UV, cyclic voltammetry (CV) and X-ray single-crystal diffraction methods. Single crystal X-ray structural analysis reveals that the compound 1 exhibits 1D chains constructed from polyanions and 4, 4′-bipy molecules connected together by hydrogen bonds and weak contact. The 1D chains are assembled into 2D networks by weak contacts, and the intermolecular interaction of “water chains” is robust enough to really act as a “supramolecular glue” to assemble the 2D networks into 3D arrays. CV study reveals that compound 1 exhibits four chemically reversible processes.     

Theoretical Study on the Stable Structures and Aromaticities for Pnictogen Dianionic Sb4^2-, Bi4^2-, and （SbBi）2^2- Clusters

Through the theoretical calculation of structural optimization, vibrational frequencies and atomization energies with one method of density functional theory （B3LYP） and two post- Hartree-Fock approaches （MP2, CCSD（T））, several stable isomers for new three pnictogen dianionic Sb4^2-, Bi4^2-, and （SbBi）2^2- species were determined. For two homoatomic Sb4^2- and Bi4^2- species, there are three stable isomers： square （D4h）, roof-shaped （C2v-1）, and C2v-2 structure with the square isomer being the ground state. For the heteroatomic dian- ionic （SbBi）2^2- species, there are also three stable isomers： rhombus （D2h）, roof-shaped （C1）, and C2v structures with the rhombic isomer being the ground state. The calculated NICS values show that nucleus-independent chemical shifts （NICS） values of roof-shaped isomers for Sb4^2-, Bi4^2-, and （SbBi）2^2- species are all negative, consequently indicating that these roof-shaped isomers possess aromaticities. NICS values for the planar ring isomers are all positive, suggesting that these three planar ring isomers have antiaromatic characters. The aromaticity for the two stable roof-shaped and square isomers are preliminarily explained and discussed with MO analysis.     

Synthesis, characterization, infrared studies, and thermal analysis of Mn0.6Zn0.4Fe2(C4H2O4)3·6N2H4 and its decomposition product Mn0.6Zn0.4Fe2O4

Manganese zinc ferrous fumarato–hydrazinate precursor, Mn_0.6Zn_0.4Fe₂(C₄H₂O₄)₃·6N₂H₄ was synthesized for the first time and characterized by chemical analysis, infrared spectral studies, and thermal analysis. Infrared studies show band at 977 cm^?1 indicating bidentate bridging nature of the hydrazine in the complex. Thermogravimetric (TG) studies show two steps dehydrazination followed by two steps total decarboxylation. The precursor on touching with burning splinter undergoes self propagating autocatalytic decomposition yielding ultrafine Mn_0.6Zn_0.4Fe₂O₄. XRD studies confirms single phase formation as well as nanosize nature of “as prepared” Mn_0.6Zn_0.4Fe₂O₄. The saturation magnetization of the “as prepared” Mn_0.6Zn_0.4Fe₂O₄ was found to be 31.46 emu gm^?1, which is lower than the reported, confirms the ultrafine nature of the oxide.     

Ab initio quantum mechanical calculations of energy,geometry, vibrational frequencies and IR intensities of tetraphosphorus tetrasulphide, α-P4S4(D2d), and vibrational analysis of As4S4 and As4Se4

Geometry, vibrational frequencies and IR intensities are calculated for α-P₄S₄ by scaled quantum mechanical calculations at the 6-31G*/SCF and STO-3G*/SCF levels. For both basis sets the frequencies are scaled with factors close to or equal to those found for P₄S₃, and based on these results a revised assignment is proposed. The α-P₄S₄ force field is transferred to the isostructural As₄S₄ and As₄Se₄ molecules and rescaled, and based on a good fit to experimental frequencies a new assignment is also proposed for these compounds.     

Grignard Addition to Quinoxalinium Salt： Synthesis of 1, 2-Dihydroquinoxaline and 1, 2, 3, 4-Tetrahydroquinoxaline Derivatives

Nucleophilic addition of organometallics to imines or iminium ion has received greatattention in recent years, especially in the field of asymmetric synthesis1. Addition ofthe nucleophilic reagents to quinoxalines was proved to be a useful method for thes…     

Synthesis and Molecular Structure of 5, 5-Dimethyl-2- (4' -methoxy)phenyl-1, 3, 2- thiazaphospholidine-4-thione 2-sulfide

1 INTRODUCTION In our previous study [1], we found that 1, 3, 2-thiazaphospholidine-4-thione 2-sulfide deriva- tives possessed various bioactivities such as herbicidal, antiviral, fungicidal activity, Which the is strongly held our interest to exploit new method for the synthesis of such phosphorohe- terocycles and investigate their biological activities. Different method for the preparation of 1, 3, 2-thiazaphospholidine-4-thione (one) 2-sulfides have been reported [2~4]. According to …     

Preparation and Electrochemical Properties of 3-Pyridinyl-6-aryl-1, 2, 4-triazolo [3, 4-b][1, 3, 4]thiadiazoles

A series of 3-pyridinyl-6-aryl-1, 2, 4-triazolo[3, 4-b][1, 3, 4]thiadiazoles(PATT) were prepared, the structures were confirmed by 1R and ^1H NMR spectra. The results of cyclic voltammetry measurements imply that all these compounds have a higher electron affinity (EA) than 2-(4-biphenyl)-5-(4-tert-butyl phenyl)-1, 3. 4-oxadiazole (PBD) which implies that PATT could be acting as better electron acceptors than widely used electron transporting material PBD.     

Synthesis, Resolution, and Enantiomeric Purity Assay of 2-n-Butylbutanedioic Acid 4-t-Butyl Esters

Introduction2-Substituted enantiomerically pure succinic acidderivatives have attracted a considerable interest in re-cent years,mainly because of their importance as chiralbuilding blocks and peptidomimetics in the field ofpharmaceutical design[1—3].Mos…     

Regioselective and Stereoselective Synthesis of the 3-Aryl-4- phosphoryl-1, 2, 4-triazoline-5-ones

Regioselective cyclization of 1-acylthiosemicarbazides has been shown to be an excellent method for the synthesis of triazoles, thiadiazoles and oxadiazoles, with a variety of potential biological activities1-6 and utilities as pharmacological properties7…     

An Efficient Preparation of 4, 4′-Dicarboxy-2, 2′-Bipyridine

A convenient and high yield preparation of 4, 4′-dicarboxy-2, 2′-bipyridine from the oxidation 4, 4′-dimethyl-2, 2′-bipyridine with potassium dichromate in sulfuric acid is reported.     

A Rapid and Efficient Synthesis of 2, 4, 6-Triarylpyridines under Microwave Irradiation

An rapid and efficient synthesis of 2, 4, 6-triarylpyridines is reported using substituted benzaldehydes, substituted acetophenones and ammonia as starting materials under microwave irradiation in the presence of PEG-400.     

Ammonium beryllium selenate dihydrate, (NH4)2Be(SeO4)2·2H2O: Preparation,X-ray powder diffraction,and vibrational spectra

The solubility in the three-component (NH₄)₂SeO₄–BeSeO₄–H₂O system is studied at 25 °C by the method of isothermal decrease of supersaturation. (NH₄)₂Be(SeO₄)₂·2H₂O crystallizes from solutions containing 31.35 mass% beryllium selenate and 30.66 mass% ammonium selenate up to solutions containing 26.84 mass% beryllium selenate and 46.84 mass% ammonium selenate. The X-ray powder diffraction data show that (NH₄)₂Be(SeO₄)₂·2H₂O is isostructural with the respective K₂Be(SeO₄)₂·2H₂O, K₂Be(SO₄)₂·2H₂O and Rb₂Be(SO₄)₂·2H₂O. (NH₄)₂Be(SeO₄)₂·2H₂O crystallizes in the monoclinic space group P2₁/c: a = 11.747(3) Å, b = 12.212(4) Å, c = 7.649(2) Å, β = 96.94(3)°, V = 1089.3(3) Å³, Z = 4. Vibrational spectra (infrared and Raman) of the title compound are presented and discussed with respect to the internal modes of both the ammonium and the selenate tetrahedra, hydrogen bond strengths and the lattice vibrations of the BeO₄ tetrahedra (skeleton vibrations).     

Syntheses,structures, and properties of transition metal complexes with 2-( n -pyridyl)benzimidazole ( n = 2, 3, and 4)

Three pyridylbenzimidazoles (2-PBIM, 3-PBIM, and 4-PBIM) have been prepared (2-PBIM: 2-(2-pyridyl)-benzimidazole, 3-PBIM: 2-(3-pyridyl)-benzimidazole, 4-PBIM: 2-(4-pyridyl)-benzimidazole). Reactions of several transition metals (Cd²⁺, Cu²⁺, Fe²⁺) with the three ligands gave four new coordination complexes, [(Cd)₂(2-PBIM)₂(CH₃COO)₄] (1), [Cu(3-PBIM)₂(CH₃COO)₂]?·?2H₂O (2), [Cu(4-PBIM)₂(CH₃COO)₂(H₂O)]?·?H₂O (3), and [Fe(4-PBIM)₂(Cl)₂(H₂O)₂] (4), respectively. These four complexes have been characterized by X-ray crystallography, IR spectroscopy, and UV absorption spectroscopy. Thermogravimetric properties of 2 and 4 were also measured. X-ray crystallographic studies reveal that these four complexes are very different, although the ligands are similar in structure. The role of hydrogen-bonding and π–π interactions in extending dimensionality of simple complexes has been discussed.     

Infrared and Raman spectra of CuCl2·2(H,D)2O and K2CuCl4·2(H,D)2O. Vibrational modes,assignment and coupling of the water librations

The i.r. and Raman spectra of CuCl₂·2H₂O and K₂CuCl₄·2H₂O and of deuterated samples of these compounds are presented in the range 50–1700 cm⁻¹ at liquid helium, liquid nitrogen, and ambient temperatures. The spectra obtained are discussed and compared with the literature data in terms of both bonding structure of the water molecules and vibrational modes, assignment, intermolecular coupling, and combination bands of the H₂O, HDO, and D₂O librations. The i.r. and Raman bands of the librational modes of CuCl₂·2H₂O are very broad even at liquid helium temperature indicating orientational disorder of the water molecules.