High-pressure phase equilibrium data for the (carbon dioxide + l-lactide + ethanol) system

Experimental phase equilibrium values (cloud points) for the ternary system involving carbon dioxide, l-lactide and ethanol have been measured in order to provide fundamental values to conduct the polymerization reaction in supercritical carbon dioxide medium. The experiments were performed using a variable-volume view cell over the temperature range from 323 K to 353 K, system pressure between 9 MPa and 25.0 MPa and different mole ratios of ethanol to l-lactide (0.5:1, 1:1 and 1.5:1). Phase transitions of vapour-liquid types were observed. The experimental results were modelled using the Peng–Robinson (PR) equation of state with the Wong–Sandler (PR–WS) mixing rule, providing a good representation of the experimental phase equilibrium values.     

Hydrate phase equilibrium for the (hydrogen + tert-butylamine + water) system

The three-phase equilibrium conditions of ternary (hydrogen + tert-butylamine + water) system were first measured under high-pressure in a “full view” sapphire cell. The tert-butylamine–hydrogen binary hydrate phase transition points were obtained through determining the points of intersection of three phases (H–L_w–V) to two phases (L_w–V) experimentally. Measurements were made using an isochoric method. Firstly, (tetrahydrofuran + hydrogen) binary hydrate phase equilibrium data were determined with this method and compared with the corresponding experimental data reported in the literatures and the acceptable agreements demonstrated the reliability of the experimental method used in this work. The experimental investigation on (tert-butylamine + hydrogen) binary hydrate phase equilibrium was then carried out within the temperature range of (268.4 to 274.7) K and in the pressure range of (9.54 to 29.95) MPa at (0.0556, 0.0886, 0.0975, and 0.13) mole fraction of tert-butylamine. The three-phase equilibrium curve (H + L_w + V) was found to be dependent on the concentration of tert-butylamine solution. Dissociation experimental results showed that tert-butylamine as a hydrate former shifted hydrate stability region to lower pressure and higher temperature.     

Hydrate phase equilibrium and structure for (methane + ethane + tetrahydrofuran + water) system

The separation of methane and ethane through forming hydrate is a possible choice in natural gas, oil processing, or ethylene producing. The hydrate formation conditions of five groups of (methane + ethane) binary gas mixtures in the presence of 0.06 mole fraction tetrahydrofuran (THF) in water were obtained at temperatures ranging from (277.7 to 288.2) K. In most cases, the presence of THF in water can lower the hydrate formation pressure of (methane + ethane) remarkably. However, when the composition of ethane is as high as 0.832, it is more difficult to form hydrate than without THF system. Phase equilibrium model for hydrates containing THF was developed based on a two-step hydrate formation mechanism. The structure of hydrates formed from (methane + ethane + THF + water) system was also determined by Raman spectroscopy. When THF concentration in initial aqueous solution was only 0.06 mole fraction, the coexistence of structure I hydrate dominated by ethane and structure II hydrate dominated by THF in the hydrate sample was clearly demonstrated by Raman spectroscopic data. On the contrary, only structure II hydrate existed in the hydrate sample formed from (methane + ethane + THF + water) system when THF concentration in initial aqueous solution was increased to 0.10 mole fraction. It indicated that higher THF concentration inhibited the formation of structure I hydrate dominated by ethane and therefore lowered the trapping of ethane in hydrate. It implies a very promising method to increase the separation efficiency of methane and ethane.     

High-pressure phase equilibria in the (carbon dioxide + 1-hexanol) system

(Vapour + liquid) equilibria (VLE) and (vapour + liquid + liquid) equilibria (VLLE) data for the (carbon dioxide + 1-hexanol) system were measured at (293.15, 303.15, 313.15, 333.15, and 353.15) K. Phase behaviour measurements were made in a high-pressure visual cell with variable volume, based on the static-analytic method. The pressure range under investigation was between (0.6 and 14.49) MPa. The Soave–Redlich–Kwong (SRK) equation of state (EOS) with classical van der Waals mixing rules (two-parameters conventional mixing rule, 2PCMR), was used in a semi-predictive approach, in order to represent the complex phase behaviour (critical curve, LLV line, isothermal VLE, LLE, and VLLE) of the system. The topology of phase behaviour is reasonably well predicted.     

Phase equilibrium measurements and modelling of ternary system (carbon dioxide + ethanol + palmitic acid)

This work reports phase equilibrium measurements for the ternary system (palmitic acid + ethanol + CO₂). The motivation of this research relies on the fact that palmitic acid is the major compound of several vegetable oils. Besides, equilibrium data for palmitic acid in carbon dioxide using ethanol as co-solvent are scarce in the literature. Phase equilibrium experiments were performed using a high-pressure variable-volume view cell over the temperature range of (303 to 343) K and pressures up to 20 MPa and mole fraction of palmitic acid from 0.0199 to 0.2930. Vapour–liquid and solid–fluid transitions were visually observed for the system studied. The Peng–Robinson equation of state, with the classical van der Waals quadratic mixing rule was employed for thermodynamic modelling of the system investigated with a satisfactory agreement between experimental and calculated values.     

(Vapor + liquid) equilibrium data for (carbon dioxide + 1,1-difluoroethane) system at temperatures from (258 to 343) K and pressures up to about 8 MPa

Accurate thermo-physical data are of utmost interest for the development of new efficient refrigeration systems. Carbon dioxide (R744) and 1,1-difluoroethane (R152a) are addressed here. Isothermal (vapor + liquid) equilibrium data are reported herein for (R744 + R152a) binary system in the (258–343) K temperature range and in the (0.14 to 7.65) MPa pressure range. A reliable “static-analytic” method taking advantage of two online ROLSI? micro capillary samplers is used for all thermodynamic measurements. The data are correlated using our in-house ThermoSoft thermodynamic model using the Peng–Robinson equation of state, the Mathias–Copeman alpha function, the Wong–Sandler mixing rules, and the NRTL model.     

(Vapour + liquid) equilibria of the {carbon dioxide + pentafluoroethane (HFC-125)} system and the {carbon dioxide + dodecafluoro-2-methylpentan-3-one (NOVEC™1230)} system

Binary (vapour + liquid) equilibrium data were measured for the {carbon dioxide + pentafluoroethane (HFC-125)} system at temperatures from 313.15 K to 333.15 K and the {carbon dioxide + dodecafluoro-2-methylpentan-3-one (NOVEC™1230)} system at temperatures from 313.15 K to 343.15 K. These experiments were carried out with a circulating-type apparatus with on-line gas chromatography. The experimental data were correlated well by the Peng–Robinson equation of state using the Wong–Sandler mixing rules.     

Phase behaviour for the (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems at temperatures from (313.2 to 393.2) K and pressures from (5 to 31) MPa

The solubility curves for the (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems were determined by a static view cell apparatus at five temperatures (313.2, 333.2, 353.2, 373.2, and 393.2) K as well as pressures up to 31.43 MPa. Two {carbon dioxide + (meth)acrylate} systems had continuous critical mixture curves with maxima in pressure located between the critical temperatures of carbon dioxide and 2-phenoxyethyl (meth)acrylate. The solubility of 2-phenoxyethyl (meth)acrylate in the {carbon dioxide + 2-phenoxyethyl (meth)acrylate} systems increases as the temperature increases at a fixed pressure. The (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems exhibit type-I phase behaviour. The experimental results for the (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems correlate with the Peng–Robinson equation of state using a van der Waals one-fluid mixing rule including two adjustable parameters. The critical properties of 2-phenoxyethyl acrylate and 2-phenoxyethyl methacrylate were predicted with the Joback and Lee–Kesler method.     

(Liquid + liquid) equilibrium of (NaClO4 + PEG 4000 + H2O) ternary system at different temperatures

Phase diagram and (liquid + liquid) equilibrium (LLE) results for {NaClO₄ + polyethylene glycol 4000 (PEG 4000) + H₂O} have been determined experimentally at T = (288.15, 298.15, and 308.15) K. The Chen-NRTL, modified Wilson and UNIQUAC models were used to correlate the values for the experimental tie-lines. The results show that the quality of fitting is better with the modified Wilson model.     

(Liquid + liquid) equilibrium of (NaNO3 + PEG 4000 + H2O) ternary system at different temperatures

Phase diagram and (liquid + liquid) equilibrium (LLE) data for the (NaNO₃ + polyethylene glycol 4000 (PEG 4000) + H₂O) system have been determined experimentally at T = (288.15 and 308.15) K. The effects of temperature on the binodal curves and tie-lines have been studied and it was found that an increasing in temperature caused the expansion of two-phase region. The Chen-NRTL, modified Wilson and UNIQUAC models were used to correlate the experimental tie-line data. The results show that the quality of fitting is better with the UNIQUAC model.     

Excess molar enthalpies of ternary mixtures (dibutyl ether or dipropyl ether + 2,2-dimethylbutane + 2,3-dimethylbutane) at the temperature 298.15 K

Excess molar enthalpies, measured at the temperature 298.15 K and atmospheric pressure conditions by means of a flow microcalorimeter, are reported for the ternary mixtures {x₁(dibutyl ether or dipropyl ether) + x₂ 2,2-dimethylbutane + (1 ? x₁ ? x₂) 2,3-dimethylbutane}. A smooth representation of the results is described and the constant-enthalpy contours for each ternary system are displayed on the respective Roozeboom diagrams. The results serve to show that good estimates of the excess molar enthalpies of the ternary systems can be obtained from the Liebermann–Fried model by using the physical properties of the constituent pure components and the parameters determined from the binary mixtures of these components.     

Quaternary isobaric (vapor + liquid + liquid) equilibrium and (vapor + liquid) equilibrium for the system (water + ethanol + cyclohexane + heptane) at 101.3 kPa

Experimental isobaric (vapor + liquid + liquid) and (vapor + liquid) equilibrium data for the ternary system {water (1) + cyclohexane (2) + heptane (3)} and the quaternary system {water (1) + ethanol (2) + cyclohexane (3) + heptane (4)} were measured at 101.3 kPa. An all-glass, dynamic recirculating still equipped with an ultrasonic homogenizer was used to determine the VLLE. The results obtained show that the system does not present quaternary azeotropes. The point-by-point method by Wisniak for testing the thermodynamic consistency of isobaric measurements was used to test the equilibrium data.     

Vapor–liquid equilibria for the ternary system of carbon dioxide + ethanol + ethyl acetate at elevated pressures

Vapor–liquid equilibrium (VLE) data for the ternary system of carbon dioxide, ethanol and ethyl acetate were measured in this study at 303.2, 308.2, and 313.2 K, and at pressures from 4 to 7 MPa. A static type phase equilibrium apparatus with visual sapphire windows was used in the experimental measurements. New VLE data for CO₂ in the mixed solvent were presented. These ternary VLE data at elevated pressures were also correlated using either the modified Soave–Redlich–Kwong or Peng–Robinson equation of state, with either the van der Waals one-fluid or Huron–Vidal mixing model. Satisfactory correlation results are reported with temperature-independent binary parameters. It is observed that at 313.2 K and 7 MPa, ethanol can be separated from ethyl acetate into the vapor phase at all concentrations in the presence of high pressure CO₂.     

(Vapour + liquid) equilibrium in (N,N-dimethylacetamide + ethanol + water) at the temperature 313.15 K

Total vapour pressures, measured at the temperature 313.15 K, are reported for the ternary mixture (N,N-dimethylacetamide + ethanol + water), and for binary constituent (N,N-dimethylacetamide + ethanol). The present results are also compared with previously obtained data for (amide + ethanol) binary mixtures, where amide = N-methylformamide, N,N-dimethylformamide, N-methylacetamide, 2-pyrrolidinone, and N-methylpyrrolidinone. We found that excess Gibbs free energy of mixing for binary (amide + ethanol) mixtures varies roughly linearly with the molar volume of amide.     

A (vapor + liquid) equilibria of the {carbon dioxide + isopropoxyethanol (iC3E1)} and the {carbon dioxide + isobutoxyethanol (iC4E1)} systems

Binary (vapor + liquid) equilibrium data were measured for the {carbon dioxide + isopropoxyethanol (iC₃E₁)} and the {carbon dioxide + isobutoxyethanol (iC₄E₁)} systems at temperatures ranging from (313.15 to 333.15) K. These experiments were performed with a circulating-type apparatus with on-line gas chromatography. The experimental data correlated well with the Peng–Robinson equation of state using the Wong–Sandler mixing rules.     

(Liquid + liquid) equilibria of (tert -amyl ethyl ether + ethanol + water) at several temperatures

(Liquid  +  liquid) equilibrium data of (tert amyl ethyl ether  +  ethanol  +  water) were determined experimentally atT =  (298.15, 308.15, and 318.15) K. The experimental results were correlated with the NRTL and UNIQUAC equations. The correlations were made at each temperature and for the three temperatures simultaneously. The best results were achieved with the NRTL equation, using α =  0.2 for the individual correlations at each temperature and α =  0.1 for the overall correlation. The experimental data were also compared with predicted values by the UNIFAC method.     

Phase equilibria in ternary (carbon dioxide + tetrahydrofuran + water) system in hydrate-forming region: Effects of carbon dioxide concentration and the occurrence of pseudo-retrograde hydrate phenomenon

In the present work, the three- and four-phase hydrate equilibria of (carbon dioxide (CO₂) + tetrahydrofuran (THF) + water) system are measured by using Cailletet equipment in the temperature and pressure range of (272 to 292) K and (1.0 to 7.5) MPa, respectively, at different CO₂ concentration. Throughout the study, the concentration of THF is kept constant at 5 mol% in the aqueous solution. In addition, the fluid phase transitions of L_W–L_V–V → L_W–L_V (bubble point) and L_W–L_V–V → L_W–V (dew point) are determined when they are present in the ternary system. For comparison, the three-phase hydrate equilibria of binary (CO₂ + H₂O) are also measured. Experimental measurements show that the addition of THF as a hydrate promoter extends hydrate stability region by elevating the hydrate equilibrium temperature at a specified pressure. The three-phase equilibrium line H–L_W–V is found to be independent of the overall concentration of CO₂. Contradictory, at higher pressure, the phase equilibria of the systems are significantly influenced by the overall concentration of CO₂ in the systems. A liquid–liquid phase split is observed at overall concentration of CO₂ as low as 3 mol% at elevated pressure. The region is bounded by the bubble-points line (L_W–L_V–V → L_W–L_V), dew points line (L_W–L_V–V → L_W + V) and the four-phase equilibrium line (H + L_W + L_V + V). At higher overall concentration of CO₂ in the ternary system, experimental measurements show that pseudo-retrograde behaviour exists at pressure between (2.5 and 5) MPa at temperature of 290.8 K.     

Liquid phase equilibria of (water + propionic acid + oleyl alcohol) ternary system at several temperatures

(Liquid–liquid) equilibrium (LLE) data are investigated for mixtures of (water + propionic acid + oleyl alcohol) at 298.15, 308.15 and 318.15 K and atmospheric pressure. The solubility curves and the tie-line end compositions of liquid phases at equilibrium were determined, and the tie-line results were compared with the data predicted by the UNIFAC method. The phase diagrams for the ternary mixtures including both the experimental and correlated tie-lines are presented. The distribution coefficients and the selectivity factors for the immiscibility region are calculated to evaluate the effect of temperature change. The reliability of the experimental tie-lines was confirmed by using Othmer–Tobias correlation. It is concluded that oleyl alcohol may serve as an adequate solvent to extract propionic acid from its dilute aqueous solutions. The UNIFAC model correlates the LLE data for 298.15, 308.15 and 318.15 K with a root mean square deviation of 5.89, 6.46, and 6.69%, respectively, between the observed and calculated mole concentrations.     

Phase equilibria of carbon dioxide + poly ethylene glycol + water mixtures at high pressure: Measurements and modelling

Phase equilibria of carbon dioxide + poly ethylene glycol (PEG) of average mol weight 6000 g/mol + water mixtures has been measured by the static method at conditions of interest for the development of Particles from Gas Saturated Solutions (PGSS)-drying processes (pressure from 10 MPa to 30 MPa, temperature from 353 K to 393 K). A thermodynamic model based on the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) equation of state has been developed for correlating experimental data. The model is able to predict the composition of the liquid phase with an average deviation of 8.0%. However, the model does not calculate correctly the concentration of PEG in the gas phase. The model is also capable of predicting VLE data reported in the literature of PEG + CO₂ mixtures with PEGs of molecular weights ranging from 1500 g/mol to 18500 g/mol as well as solid–fluid equilibrium of carbon dioxide + PEG mixtures at pressures below 10 MPa.     

Enthalpies of dissociation of clathrate hydrates of carbon dioxide,nitrogen, (carbon dioxide + nitrogen), and (carbon dioxide + nitrogen + tetrahydrofuran)

A calorimetric technique is described for measuring the enthalpy of dissociation liberated from solid hydrates. In this study, the enthalpies of dissociation were determined at T =  273.65 K andp =  0.1 MPa for simple and mixed hydrates of carbon dioxide, nitrogen, (carbon dioxide  +  nitrogen), and (carbon dioxide  +  nitrogen  +  tetrahydrofuran) using an isothermal microcalorimeter. The addition of tetrahydrofuran (THF) promoted hydrate stability and increased the number of guest molecules encaged in the small and large cavities of the hydrate lattice, resulting in lower enthalpy of dissociation, compared with structure II hydrate. The composition ratio of guest molecules did not affect the enthalpy of dissociation, which was found to be nearly constant for the same mixture.