Thermochemistry of some barium compounds

The molar enthalpies of reaction of metallic barium with 0.047 mol·dm⁻³ HClO₄ as well as the molar enthalpies of dissolution of BaCl₂ in 1.01 mol·dm⁻³ HCl and in water have been measured at T=298.15 K in a sealed swinging calorimeter with an isothermal jacket. From these results the standard molar enthalpy of formation of the barium ion in an aqueous solution at infinite dilution, as well as the enthalpies of formation of barium chloride and barium perchlorate, are calculated to be: Δ_fH⁰_m(Ba²⁺,aq)=−(535.83±1.25) kJ · mol⁻¹; Δ_fH⁰_m(BaCl₂,cr)=−(855.66±1.28) kJ · mol⁻¹; and Δ_fH⁰_m(BaClO₄,cr)=−(796.26±1.35) kJ · mol⁻¹. The results obtained are discussed and compared with previous experimental values.     

Thermochemistry of some cytisine derivatives

The enthalpies of solution of cytisine derivatives (phosphoric acid cytiside dimethyl ester, cytisinovinyloxyethylaminothiourea) in 96% ethanol at various dilutions were determined by isothermal calorimetry. Equations describing the dependences ΔH _s ⁰ = f(m ^1/2) (m is the molal concentration) were obtained. The standard enthalpies of solution, combustion, melting, and formation (at 298.15 K) of the compounds were calculated.     

Thermochemistry of the complexes of some microelements and histidine

Solid complexes of M(His)₂Cl₂·nH₂O (M=Mn, Co, Ni, Cu) of MnCl₂·6H₂O, CoCl₂·6H₂O, NiCl₂·6H₂O, CuCl₂·2H₂O and L-α-histidine (His) have been prepared in 95% ethanol solution and characterized by elemental analyses, chemical analyses, IR and TG-DTG. The constant-volume combustion energies of the complexes have been determined by a rotating-bomb calorimeter. And the standard enthalpies of formation of the complexes have been calculated as well. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermochemistry of piperidine adducts of some bivalent transition metal bromides

The adducts [MBr₂(pipd) _n ] (where M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), or Zn(II); pipd = piperidine; n = 1/2, 1, or 3/4) were synthesized and characterized by melting points, elemental analysis, thermal studies, and IR and electronic spectroscopy. From calorimetric studies in solution, the standard enthalpies of formation and several other thermochemical parameters of them were determined. The mean standard enthalpies of the metal–nitrogen bonds were calculated, as well as the enthalpies of the adduct formation in the gaseous phase. Using the values obtained for the enthalpies of reaction, the acidity order of the salts is obtained: FeBr₂ > MnBr₂ and CoBr₂ > NiBr₂. Comparing with pyridine adducts, the ligand piperidine is more basic than the ligand pyridine: pipd > py.     

Thermochemistry of adducts of some bivalent transition metal bromides with aniline

The compounds [MBr₂(an)₂] (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II); an = aniline) were synthesized and characterized by melting points, elemental analysis, thermal studies, and electronic and IR spectroscopy. The enthalpies of dissolution of the adducts, metal(II) bromides and aniline in methanol, aqueous 1.2 M HCl or 25% (v/v) aqueous 1.2 M HCl in methanol were measured. The following thermochemical parameters for the adducts have been determined by thermochemical cycles: the standard enthalpies for the Lewis acid/base reactions (Δ_rH°), the standard enthalpies of formation (Δ_fH°), the standard enthalpies of decomposition (Δ_DH°), the lattice standard enthalpies (Δ_MH°) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH°(g)). The mean bond dissociation enthalpies of the M(II)-nitrogen bonds () and the enthalpies of formation of the adducts from the ions in the gaseous phase: M²⁺_(g) + Br⁻_(g) + an_(g) → [MBr₂(an)₂]_(g), (Δ_fiH°) have been estimated.     

Thermochemistry of some complexes of chromium(III) with imidazoles

The thermal decomposition in air of several complexes of chromium(III) with imidazole,N-methylimidazole and 2-methylimidazole has been studied with the aid of differential thermal analysis (DTA), thermogravimetry (TG) and derivative thermogravimetry (DTG) in the temperature range 25–600°C. Although the final process of the decomposition gives Cr₂O₃, there are interesting differences in the complete process of decomposition. The reasons for these differences appear to be related to the trans-effect and to the presence in the imidazole complexes of hydrogen bonds. Enthalpies of the several decomposition reactions have been determined by differential thermal analysis.     

Thermochemistry of adducts of some bivalent transition metal bromides with pyridine

The compounds [MBr₂(py)₂] (where M is Mn(II), Co(II), Ni(II), Cu(II) or Zn(II); py = pyridine) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of dissolution of the adducts, metal(II) bromides and pyridine in 25% (v/v) 1.2 M aqueous HCl in methanol were measured and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH^θ), the standard enthalpies of formation (Δ_fH^θ), the standard enthalpies of decomposition (Δ_DH^θ), the lattice standard enthalpies (Δ_MH^θ) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH^θ(g)). The mean bond dissociation enthalpies of the M(II)-nitrogen bonds have been estimated as well as the enthalpies of the adducts formation in the gaseous phase.     

Thermochemistry of adducts of some bivalent transition metal bromides with 4-chloroaniline

The compounds [MBr₂(p-clan)₂] (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II); p-clan = 4-chloroaniline) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of solution of the adducts, metal(II) bromides and 4-chloroaniline in methanol, 1.2 M aqueous HCl or 25% (v/v) 1.2 M aqueous HCl in methanol were measures and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH°), the standard enthalpies of formation (Δ_fH°), the standard enthalpies of decomposition (Δ_DH°), the lattice standard enthalpies (Δ_MH°) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH°(g)). The mean bond dissociation enthalpies of the metal(II)-nitrogen coordinated bonds and the enthalpies of adduct formation in the gaseous phase have been estimated.     

Thermochemistry of some adducts of Indium(III) chloride with neutral donors

The [InCl₃(L) _n ] (where L is 2,2′-bipyridine (bipy), 2,2′-bipyridine N,N′-dioxide (bipyNO), N,N-dimethylacetamide (dma), urea (u), thiourea (tu) or 1,1,3,3-tetramethylthiourea (tmtu); n = 1.5, 3 or 4) were synthesized and characterized by melting points, elemental analysis, thermal analysis and IR spectroscopy. The enthalpies of dissolution of the adducts, Indium(III) chloride and ligands in 1.2 M aqueous HCl were measured and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_r H ^θ), the standard enthalpies of formation (Δ_f H ^θ), the lattice standard enthalpies (Δ_M H ^θ), and the standard enthalpies of decomposition (Δ_D H ^θ).     

Thermochemistry of Ketene

A new value, -100±10 kJ mol^{- 1}, was obtained for the enthalpy of formation of gaseous ketene, H _f ⁰(g)(CH₂ = C = O), from the data obtained by the authors in combination with certain published experimental and calculation data. The suggested value is considerably lower than the value accepted in the literature, -48 kJ mol^{- 1}.     

Thermochemistry of adducts of some transition metals(II) bromides with pyridine N-oxide

The compounds [MBr₂(pyNO)_n] (where M: Mn, Fe, Co, Ni, Cu or Zn; pyNO is pyridine N-oxide and n=2, 3 or 6) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of dissolution of the adducts, metal(II) bromides and pyNo in methanol were measured and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH^θ), the standard enthalpies of formation (Δ_fH^θ), the standard enthalpies of decomposition (Δ_DH^θ), the lattice standard enthalpies (Δ_MH^θ) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH^θ(g)). The mean bond dissociation enthalpies of the M(II)-oxygen bonds () have been estimated.     

Thermochemistry of lignin

Thermochemical reactions occurring in various stages of structural transformations of native lignin in its thermal treatment in a wide temperature range are considered and classified. Attention is given to the initial state of lignin in its primary isolation without heating. The terminology of lignin products, used in the literature, is put in order to a certain extent. The thermochemical reactions in which lignins are transformed in processing of raw wood materials and the structure of isolated lignins undergoes changes in the course of the target thermal treatment are differentiated. The applied aspect of the directed thermochemical synthesis of new lignin-based low- and high-molecular-mass compounds is discussed.     

Thermochemistry of explosives

The kinetics constants for the decomposition reaction of an explosive can be used to calculate the lowest temperature (critical temperature, T_m) at which any specific size and shape of explosive can self heat to explosion; however, the accuracy of the calculation is in doubt without an independent experimental determination of a critical temperature for a known size and shape of the explosive. A method is presented for the experimental determination of critical temperatures on a routine basis, and it is shown that agreement between calculated and experimental values is excellent for most common explosives.     

Thermochemistry of paracetamol

Combustion calorimetry, Calvet-drop sublimation calorimetry, and the Knudsen effusion method were used to determine the standard (p ^o = 0.1 MPa) molar enthalpies of formation of monoclinic (form I) and gaseous paracetamol, at T = 298.15 K: \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textO ₂ \textN,\text cr I ) = - ( 4 10.4 ±1. 3)\text kJ  \textmol ^{- 1} \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{O}}_{ 2} {\text{N}},{\text{ cr I}}} \right) = - ( 4 10.4 \pm 1. 3){\text{ kJ}}\;{\text{mol}}^{ - 1} and \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textO ₂ \textN,\text g ) = - ( 2 80.5 ±1. 9)\text kJ  \textmol ^{- 1} . \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{O}}_{ 2} {\text{N}},{\text{ g}}} \right) = - ( 2 80.5 \pm 1. 9){\text{ kJ}}\;{\text{mol}}^{ - 1} . From the obtained \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textO ₂ \textN,\text cr I ) \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{O}}_{ 2} {\text{N}},{\text{ cr I}}} \right) value and published data, it was also possible to derive the standard molar enthalpies of formation of the two other known polymorphs of paracetamol (forms II and III), at 298.15 K: \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textO ₂ \textN,\text crII ) = - ( 40 8.4 ±1. 3)\text kJ  \textmol ^{- 1} \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{O}}_{ 2} {\text{N}},{\text{ crII}}} \right) = - ( 40 8.4 \pm 1. 3){\text{ kJ}}\;{\text{mol}}^{ - 1} and \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textO ₂ \textN,\text crIII ) = - ( 40 7.4 ±1. 3)\text kJ  \textmol ^{- 1} . \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{O}}_{ 2} {\text{N}},{\text{ crIII}}} \right) = - ( 40 7.4 \pm 1. 3){\text{ kJ}}\;{\text{mol}}^{ - 1} . The proposed \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textO ₂ \textN,\text g ) \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{O}}_{ 2} {\text{N}},{\text{ g}}} \right) value, together with the experimental enthalpies of formation of acetophenone and 4′-hydroxyacetophenone, taken from the literature, and a re-evaluated enthalpy of formation of acetanilide, \Updelta_\textf H_\textm^\texto ( \textC ₈ \textH ₉ \textON,\text g ) = - ( 10 9. 2 ± 2. 2)\text kJ  \textmol ^{- 1} , \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{C}}_{ 8} {\text{H}}_{ 9} {\text{ON}},{\text{ g}}} \right) = - ( 10 9. 2\,\pm\,2. 2){\text{ kJ}}\;{\text{mol}}^{ - 1} , were used to assess the predictions of the B3LYP/cc-pVTZ and CBS-QB3 methods for the enthalpy of a isodesmic and isogyric reaction involving those species. This test supported the reliability of the theoretical methods, and indicated a good thermodynamic consistency between the \Updelta_\textf H_\textm^\texto \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} (C₈H₉O₂N, g) value obtained in this study and the remaining experimental data used in the \Updelta_\textr H_\textm^\texto \Updelta_{\text{r}} H_{\text{m}}^{\text{o}} calculation. It also led to the conclusion that the presently recommended enthalpy of formation of gaseous acetanilide in Cox and Pilcher and Pedley’s compilations should be corrected by ~20 kJ mol⁻¹.     

Thermochemistry of some mono-substituted iodine fluorides and a comparison of gas and solid phase structures

The heat of formation of iodine trifluoride, obtained from an ab initio calculation of its heat of dismutation to mono- and penta-fluorides, was close to their average value. The mean bond dissociation energies of these iodine fluorides is almost invariant. The reduction couples between penta and trifluoro, or tri and mono-fluoro compounds, were employed to calculate formation heats of phenyl and trifluoromethyl iodine fluorides via similar isodesmic reactions. The substituted derivatives were stronger oxidants than the unsubstituted iodine fluorides as quantified by their redox couples. Similarly the corresponding chloro-fluorides were stronger oxidants than the iodo-fluorides. Heats of formation of other iodine fluoride derivatives can be obtained by additivity methods. Recent X-ray structures, when compared with calculated gas-phase structures, showed a lesser tilt of axial I-F bonds to the vertical in the solids probably due to intermolecular association. Rotational barriers around C-I bonds were small enough to permit almost free rotation at ambient temperatures.     

Thermochemistry of heteroatomic compounds

The enthalpies of vaporization of different classes three-coordinated arsenic compounds have been determined according to their enthalpies of solution in hexane and molar refraction. The enthalpies of solvation of cyclic and acyclic As(III)-derivatives in hexane, carbon tetrachloride,p-xylene and pyridine are obtained and discussed. Part 6, see Ref. [1].     

Thermochemistry of heteroatomic compounds

The enthalpies of solvation of four geometric isomers of 2,5-dimethyl-1-phenyl-1-thioxophosphorinan-4-one in chloroform, nitrobenzene, and methanol were calculated using the enthalpies of vaporization of the isomers determined by the modified Solomonov—Konovalov method from the enthalpies of solution of the compounds in CCl₄ andp-xylene and molar refractions. The enthalpies of formation (ΔH _f ^o) of the isomers in the condensed and gas phase were assessed in the framework of Benson's group additivity scheme by summing the ΔH _f ^o values for phosphacycloketone fragments obtained from molecular mechanics calculations with the contributions of the phenyl group and S atom attached to the P atom. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1533–1536, September, 2000.