Physicochemical properties of {1-methyl piperazine (1) + water (2)} system at T = (298.15 to 343.15) K and atmospheric pressure

Densities (ρ) and viscosities (η) of aqueous 1-methylpiperazine (1-MPZ) solutions are reported at T = (298.15 to 343.15) K. Refractive indices (n_D) are reported at T = (293.15 to 333.15) K, and surface tensions (γ) are reported at T = (298.15 to 333.15) K. Derived excess properties, except excess viscosities (Δη), are found to be negative over the entire composition range. The addition of 1-MPZ reduces drastically the surface tension of water. The temperature dependence of surface tensions is explained in terms of surface entropy (S^S) and enthalpy (H^S). The measured and derived properties are used to probe the microscopic liquid structure of the bulk and surface of the aqueous amine solutions.     

(Liquid + liquid) equilibria in {water + acrylic acid + (1-butanol,or 2-butanol,or 1-pentanol)} systems at T = 293.2 K,T = 303.2 K,and T = 313.2 K and atmospheric pressure

(Liquid + liquid) equilibrium (LLE) data for {water + acrylic acid + (1-butanol, or 2-butanol, or 1-pentanol)} at T = 293.2 K, T = 303.2 K, and T = 313.2 K and atmospheric pressure (≈95 kPa) were determined by Karl Fischer titration and densimetry. All systems present type I binodal curves. The size of immiscibility region changes little with an increase in temperature, but increases according to the solvent, following the order: 2-butanol < 1-butanol < 1-pentanol. Values of solute distribution and solvent selectivities show that 1-pentanol is a better solvent than 1-butanol or 2-butanol for acrylic acid removal from water solutions. Quality of data was ascertain by Hand and Othmer-Tobias equations, giving R² > 0.916, mass balance and accordance between tie lines and cloud points. The NRTL model was used to correlate experimental data, by estimating new energy parameters, with root mean square deviations below 0.0053 for all systems.     

Thermophysical properties of the binary mixtures (1,8-cineole + 1-alkanol) at T = (298.15 and 313.15) K and at atmospheric pressure

This work presents the measurements of the density, speed of sound, refractive index and enthalpy of binary mixtures containing {1,8-cineole + 1-alkanol (ethanol, 1-propanol, 1-butanol, and 1-pentanol)} at two temperatures (298.15 and 313.15) K and atmospheric pressure. The determination of excess molar volume, speed of sound deviation, refractive index deviation, molar refraction, molar refraction deviation, excess isentropic compressibility, and excess molar enthalpy are also given. Redlich–Kister equation was used to fit these derivate properties. The experimental data of the constituent binaries were analysed to discuss the nature and strengths of intermolecular interactions. Eventually some models, SAFT and PC-SAFT for density, Free Length and Collision Factor for speed of sound, Gladstone-Dale Arago-Biot for refractive index, and UNIFAC for excess molar enthalpy, among others, were successfully applied.     

Energetic characterisation of the system (water + 1-propoxypropan-2-ol) at T = 298.15 K

Given the importance that enthalpic and entropic contributions have in the interplay between thermodynamics and self-assembly of aqueous amphiphile systems, the energetic characterisation of the system {water + 1-propoxypropan-2-ol (1-pp-2-ol)} at T = 298.15 K was made by directly measuring excess partial molar enthalpies of 1-pp-2-ol and water, over the entire composition range, at T = 298.15 K and atmospheric pressure. Derivatives of the partial molar properties with respect to the composition are used to improve the understanding of molecular interactions in the water-rich region. The present results were compared with those for the well-studied system {water + 2-butoxyethanol (nC₄E₁)}, the two amphiphiles being structural isomers.     

Excess thermodynamic properties of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate and N-octyl-2-pyrrolidone from T = (298.15 to 323.15) K at atmospheric pressure

Density (ρ), refractive index (n_D) and speed of sound (u) values are measured for the binary mixture of 1-butyl-3-methylimidazolium tetrafluoroborate and N-octyl-2-pyrrolidone over the entire range of mole fraction at temperatures from T = (298.15 to 323.15) K under atmospheric pressure. Using the basic experimental data, various acoustic and excess thermodynamic parameters are calculated and are discussed in terms of molecular interactions between the present investigated binary system. The excess values are fitted to Redlich–Kister polynomial equation to estimate the binary coefficients and standard deviation between the experimental and calculated values. Further, the molecular interactions in the binary mixture system are analysed using the experimental FT-IR spectrum recorded at room temperature.     

(Liquid + liquid) equilibria of (water + linalool + limonene) ternary system at T = (298.15, 308.15, and 318.15) K

(Liquid + liquid) equilibrium (LLE) data for {water (1) + linalool (2) + limonene (3)} ternary system at T = (298.15, 308.15, and 318.15 ± 0.05) K are reported. The organic chemicals were quantified by gas chromatography using a flame ionisation detector while water was quantified using a thermal conductivity detector. The effect of the temperature on (liquid + liquid) equilibrium is determined and discussed. Experimental data for the ternary mixture are compared with values calculated by the NRTL and UNIQUAC equations, and predicted by means of the UNIFAC group contribution method. It is found that the UNIQUAC and NRTL models provide a good correlation of the solubility curve at these three temperatures, while comparing the calculated values with the experimental ones, the best fit is obtained with the NRTL model. Finally, the UNIFAC model provides poor results, since it predicts a greater heterogeneous region than experimentally observed.     

Activity coefficients of CaCl2 in (serine or proline + water) mixtures at T = 298.15 K

Activity coefficients for the (CaCl₂ + amino acid + water) system were determined at a temperature of 298.15 K using ion-selective electrodes. The range of molalities of CaCl₂ is (0.01 to 0.20) mol · kg^?1, and that of amino acids is (0.10 to 0.40) mol · kg^?1. The activity coefficients obtained from the Debye–Hückel extended equation and the Pitzer equation are in good agreement with each other. Results show that the interactions between CaCl₂ and amino acid are controlled mainly by the electrostatic interactions (attraction). Gibbs free energy interaction parameters (g_EA) and salting constants (k_S) are positive, indicating that these amino acids are salted out by CaCl₂. These results are discussed based on group additivity model.     

Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K

Experimental values of density, viscosity, and refractive index at T = (298.15, 303.15, and 308.15) K while the speed of sound at T = 298.15 K in the binary mixtures of methylcyclohexane with n-hexane, n-heptane, n-octane, n-nonane, n-decane, n-dodecane, and iso-octane are presented over the entire mole fraction range of the binary mixtures. Using these data, excess molar volume, deviations in viscosity, molar refraction, speed of sound, and isentropic compressibility are calculated. All the computed quantities are fitted to Redlich and Kister equation to derive the coefficients and estimate the standard error values. Such a study on model calculations in addition to presentation of experimental data on binary mixtures are useful to understand the mixing behaviour of liquids in terms of molecular interactions and orientational order–disorder effects.     

(Liquid + liquid) equilibrium data for the ternary systems (cycloalkane + ethylbenzene + 1-ethyl-3-methylimidazolim ethylsulfate) at T = 298.15 K and atmospheric pressure

In this paper, (liquid + liquid) equilibrium (LLE) data for the ternary systems (cyclohexane, or cyclooctane, or methylcyclohexane + ethylbenzene + 1-ethyl-3-methylimidazolium ethylsulfate) have been determined experimentally at T = 298.15 K and atmospheric pressure. The solubility curves and the tie-line compositions of the conjugate phases were obtained by means of density. The degree of consistency of the tie-lines was tested using the Othmer–Tobias equation, and the Non-Random Two-Liquid (NRTL) and the Universal Quasi-Chemical (UNIQUAC) models were used to correlate the phase equilibrium in the systems. Selectivity and solute distribution ratio were evaluated for the immiscible region.     

Activity coefficients of electrolyte and amino acid in the systems (water + potassium chloride + dl -valine) at T = 298.15 K and (water + sodium chloride + l -valine) at T = 308.15 K

The activity coefficient data were reported for (water  +  potassium chloride  + dl -valine) at T =  298.15 K and (water  +  sodium chloride  + l -valine) at T =  308.15 K. The measurements were performed in an electrochemical cell using ion-selective electrodes. The maximum concentrations of the electrolytes and the amino acids studied were 1.0 molality and 0.4 molality, respectively. The results of the activity coefficients of dl -valine are compared with the activity coefficients of dl -valine in (water  +  sodium chloride  + dl -valine) system obtained from the previous study. The results show that the presence of an electrolyte and the nature of its cation have a significant effect on the activity coefficient of dl -valine in aqueous electrolyte solutions.     

Partition behaviour of benzoic acid in (water + n-dodecane) solutions at T = (293.15 and 298.15) K

The partition coefficients of benzoic acid in solutions of two immiscible solvents, water and n-dodecane, were measured at temperatures of (293.15 and 298.15) K. The experimental results indicated that at both temperatures the partition coefficients were not constant, but showed linear dependences on the concentration of benzoic acid in water. Dimerization of benzoic acid in n-dodecane and ionization in water were assumed based on the chemical theory and the experimental results verified this assumption quite well. Accordingly the association equilibrium constants of benzoic acid in n-dodecane were obtained by a linear regression. The regression results also showed that there was a very strong dimerization of benzoic acid in n-dodecane over the temperatures and concentration range investigated.     

(Vapor + liquid) phase equilibrium measurements for {trifluoroiodomethane (R13I1) + propane (R290)} from T = (258.150 to 283.150) K

In this paper, the (vapor + liquid) equilibrium data for (R13I1 + R290) were measured by a vapor-recirculation apparatus at temperatures from (258.150 to 283.150) K. The VLE data were correlated by the Peng–Robinson equation of state with two different models, the van der Waals mixing rule, and the Huron–Vidal mixing rule involving the NRTL activity coefficient model. Good agreements were found between the calculated data and the experimental data. The maximum average absolute relative deviation of pressure (AARD p) was 0.48%, while the maximum average absolute deviation of composition (AAD y) was 0.0040. Meanwhile, zeotropic behavior can be found for the measured system in this study. The total combined standard uncertainties for temperature, pressure and composition measurements were ±5 mK, ±0.0005 MPa and ±0.005, respectively.     

(Liquid + liquid) equilibria for (benzene + cyclohexane + dimethyl sulfoxide) system at T = (298.15 or 303.15) K: Experimental data and correlation

(Liquid + liquid) equilibrium (LLE) data were measured experimentally at T = (298.15 or 303.15) K and atmospheric pressure for the (benzene + cyclohexane + dimethyl sulfone (DMSO)) system. The Othmer–Tobias equation was applied to verify the reliability of the data. Based on the data, the selectivity of DMSO was estimated and compared with that of ionic liquids. The highest selectivity coefficient of DMSO can reach beyond 14, which means it is able to compete with some ionic liquids and it would be a good extractant to separate benzene from cyclohexane. At the same time, the NRTL model was used to correlate the data and the results show that the model agrees on the experimental data very well.