Volumetric and surface properties of pure ionic liquid n-octyl-pyridinium nitrate and its binary mixture with alcohol

The density and surface tension for pure ionic liquid N-octyl-pyridinium nitrate were measured from (293.15 to 328.15) K. The coefficient of thermal expansion, molecular volume, standard entropies, and lattice energy were calculated from the experimental density values. The critical temperature, surface entropy, surface enthalpy, and enthalpy of vaporization were also studied from the experimental surface tension results. Density and surface tension were also determined for binary mixtures of (N-octyl-pyridinium nitrate + alcohol) (methanol, ethanol, and 1-butanol) systems over the whole composition range at 298.15 K and atmospheric pressure. Excess molar volumes and surface tension deviations for the binary systems have been calculated and were fitted to a Redlich–Kister equation to determine the fitting parameters and the root mean square deviations. The partial molar volume, excess partial molar volume, and apparent molar volume of the component IL and alcohol in the binary mixtures were also discussed.     

Density and surface tension of pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate and its binary mixture with alcohol and water

The density and surface tension of the pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate were measured from T (293.15 to 343.15) K. The coefficient of thermal expansion, molecular volume, standard entropy, lattice energy, surface entropy, surface enthalpy, and enthalpy of vaporization were calculated from the experimental values. Density and surface tension were also determined for binary mixtures of {1-butyl-3-methyl-imidazolium l-lactate + water/alcohol (methanol, ethanol, and 1-butanol)} systems over the whole composition range from T (298.15 to 318.15) K at atmospheric pressure. The partial molar volume, excess partial molar volume and apparent molar volume of the component IL and alcohol/water in the binary mixtures were discussed as well as limiting properties at infinite dilution and the thermal expansion coefficients of the four binary mixtures. The surface properties of the four binary mixtures were also discussed.     

Effect of electrolytes on surface tension and surface adsorption of 1-hexyl-3-methylimidazolium chloride ionic liquid in aqueous solution

Surface and bulk properties of 1-hexyl-3-methylimidazolium chloride [C₆mim][Cl] as an ionic liquid (IL) have been investigated by surface tension and electrical conductivity techniques at various temperatures. Results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solution. Critical aggregation concentration (cac) values obtained by conductivity and surface tension measurements are in good agreement with values found in the literature. A series of important and useful adsorption parameters including cac, surface excess concentration (Γ), and minimum surface area per molecule (A_min) at the air + water interface were estimated from surface tension in the presence and absence of different electrolytes. Obtained data show that the surface tension as well as the cac of [C₆mim][Cl] is reduced by electrolytes. Also, values of surface excess concentration (Γ) show that the IL ions in the presence of electrolyte have much larger affinity to adsorption at the surface and this affinity increased in aqueous electrolyte solution in the order of I^? > Br^? > Cl^? for counter ion of salts that was explained in terms of a larger repulsion of chloride anions from interface to the bromide and iodide anion as well as difference in their excess polarizability.     

Properties of n-butylpyridinium nitrate ionic liquid and its binary mixtures with water

The density and surface tension of the pure ionic liquid n-butylpyridinium nitrate ([BuPy]NO₃) were determined at temperature range from T = (293.15 to 338.15) K. The coefficient of thermal expansion, molecular volume and lattice energy of [BuPy]NO₃ were calculated from the experimental values of density. The surface entropy and enthalpy of [BuPy]NO₃ were investigated. The IL studied show much lower surface enthalpy and lattice energy in comparison with fused salts. The densities and surface tensions of binary mixtures of [BuPy]NO₃ with water have been measured within the whole composition range at T = 298.15 K and atmospheric pressure. Excess molar volumes V^E and surface tension deviations δγ were then deduced from the experimental results as well as partial molar volumes and excess partial molar volumes. Excess molar volumes have a negative deviation from ideal behavior and the surface tension deviations are negative over the whole compositions range. V^E and δγ were correlated with suitable equation respectively.     

Density and surface tension of pure 1-ethyl-3-methylimidazolium l-lactate ionic liquid and its binary mixtures with water

The density and surface tension of 1-ethyl-3-methylimidazolium l-lactate ([emim][l-lactate]) ionic liquid were determined from T = (283.15 to 333.15) K. The coefficients of thermal expansion were calculated from the experimental density results using an empirical correlation for T = (283.15 to 333.15) K. Molecular volume and standard entropies of the IL were calculated from the experimental density values. The surface properties of IL were investigated. The critical temperature and enthalpy of vaporization were also discussed. Density and surface tension have been measured over the whole composition range for {[emim][l-lactate] + water} binary systems at a temperature of 298.15 K and atmospheric pressure. Excess molar volumes V^E and the surface tension deviations δγ have been determined.     

Experimental densities,dynamic viscosities and surface tensions of the ionic liquids series 1-ethyl-3-methylimidazolium acetate and dicyanamide and their binary and ternary mixtures with water and ethanol at T = (298.15 to 343.15 K)

In this paper, experimental densities and dynamic viscosities of 1-ethyl-3-methylimidazolium based ionic liquids (ILs) with the anions acetate and dicyanamide are presented in a wide temperature range (298.15 to 343.15 K) at atmospheric pressure. Surface tension of these ILs was measured at T = 298.15 K. The effect of water and/or ethanol compositions on densities and dynamic viscosities of these ILs are studied in binary and ternary mixtures. A quadratic mixing rule was used to correlate binary and ternary liquid densities. The Eyring–Patel–Teja model, which is recommended for polar and aqueous systems, is used to correlate dynamic viscosity data over the whole range of compositions and temperatures in binary and ternary mixtures. Temperature-dependent interaction parameters are introduced here to account for the changes of viscosities with temperature showing good agreements with experimental data.     

Surface tension and refractive index of pure and water-saturated tetradecyltrihexylphosphonium-based ionic liquids

Experimental data on the surface tension and refractive index of tetradecyltrihexylphosphonium-based ionic liquids with bromide, chloride, decanoate, methanesulfonate, dicyanimide, bis(2,4,4-trimethylpentyl)phosphinate and bis(trifluoromethylsulfonyl)imide anions are reported. The data were obtained for pure and water saturated samples at temperatures from 283 K to 353 K and at atmospheric pressure. The refractive index of the investigated ionic liquids decreases with increasing the water content in the sample. On the other hand, no clearly dependence of the surface tension with the water content up to a weight fraction of 16% was found. The prediction of the refractive index for the studied ionic liquids was also accomplished by a group contribution method and new values for the cation and diverse anions were estimated and proposed. The studied ionic liquids show lower surface tension in comparison with imidazolium-, pyridinium- or pyrrolidinium-based ionic liquids with a similar anion; also they show higher surface entropy than cyclic nitrogen-based fluids which indicates a lower surface organization. The anion dependence of the surface tension and surface entropy for the investigated ionic liquids is weaker than that for short-chain imidazolium-based ionic liquids. Their critical temperatures evaluated from Eötvos and Guggenheim equations are also lower than those of N-heterocyclic ionic fluids.     

Properties of pure 1-methylimidazolium acetate ionic liquid and its binary mixtures with alcohols

Densities and viscosities of the pure ionic liquid 1-methylimidazolium acetate ([Mim]Ac) and its binary mixtures with methanol, ethanol, 1-propanol, and 1-butanol were measured at temperature ranging from T = (293.15 to 313.15) K. The thermal expansion coefficient, molecular volume, standard entropy, and lattice energy of [Mim]Ac were deduced from the experimental density results. A simple linear equation was used to correlate the variation of viscosity of [Mim]Ac with temperature. Excess molar volumes V^E and viscosity deviations Δη for the binary mixtures at above mentioned temperature were calculated and fitted to the Redlich–Kister equation with satisfactory results. Excess molar volumes for {[Mim]Ac + 1-butanol} mixture have an S shape, while those for other mixtures have a negative deviation from ideal behaviour over the entire mole fraction range. Viscosity deviations are all negative deviation for {[Mim]Ac + alcohol} mixtures. The results were interpreted in terms of interactions and structural factors of binary mixtures.     

Effect of temperature on mixing thermodynamics of a new ionic liquid: {2-Hydroxy ethylammonium formate (2-HEAF) + short hydroxylic solvents}

Density and ultrasonic velocity of the mixtures of the new ionic liquid 2-hydroxy ethylammonium formate (2-HEAF) and short hydroxylic solvents (water, methanol, and ethanol) have been measured at the range of temperature (288.15 to 323.15) K and atmospheric pressure. The corresponding apparent molar volume and the apparent molar isentropic compressibility values have been evaluated from the experimental data and fitted to a temperature dependent Redlich–Mayer equation. From these correlations, the limiting infinite dilution values of the apparent magnitudes have also been computed. Derived properties such as isobaric expansibility and isothermal coefficient of pressure excess molar enthalpy were computed due to their importance in the study of specific molecular interactions. The new experimental data were used to test the capability of prediction of the modified Heller temperature dependent equation (MHE) and collision factor theory (CFT). The obtained results indicate that ionic liquid interactions in water are weaker than in the studied alcoholic solutions. An intersection point in isotherms of isentropic compressibility was observed for aqueous solutions which may be an indication of the clathrate structural interactions at high solvent composition. The observed inverse dependence on temperature for aqueous or alcoholic mixtures points out the special trend of packing of this ionic liquid into hydroxylic solvents and its strong dependence on steric hindrance of aliphatic residues. As previously observed, the increase in van der Waals forces due to the presence of long alkyl chain (into ionic liquid and alcohols) leads to higher interactions on mixing.     

Determination and modelling of osmotic coefficients and vapour pressures of binary systems 1- and 2-propanol with CnMimNTf2 ionic liquids (n = 2, 3, and 4) at T = 323.15 K

The osmotic and activity coefficients and vapour pressures of binary mixtures containing 1-propanol, or 2-propanol and imidazolium-based ionic liquids with bis(trifluoromethylsulfonyl)imide as anion (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, C₂MimNTf₂, 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, C₃MimNTf₂, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, C₄MimNTf₂) were determined at T = 323.15 K using the vapour pressure osmometry technique. The experimental osmotic coefficients were correlated using the extended Pitzer model modified by Archer and the MNRTL model, obtaining standard deviations lower than 0.033 and 0.064, respectively. The mean molal activity coefficients and the excess Gibbs free energy for the mixtures studied were calculated from the parameters of the extended Pitzer model modified by Archer. Besides the effect of the alkyl-chain of the cation, the effect of the anion can be assessed comparing the experimental results with those previously obtained for imidazolium ionic liquids with sulphate anions.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Phase diagrams of ionic liquids-based aqueous biphasic systems as a platform for extraction processes

In the past few years, ionic liquid-based aqueous biphasic systems have become the subject of considerable interest as a promising technique for the extraction and purification of several macro/biomolecules. Aiming at developing guidelines for more benign and efficient extraction processes, phase diagrams for aqueous biphasic systems composed of ionic liquids and inorganic/organic salts are here reported. Several combinations of ionic liquid families (imidazolium, pyridinium, phosphonium, quaternary ammonium and cholinium) and salts [potassium phosphate buffer (KH₂PO₄/K₂HPO₄ at pH 7), potassium citrate buffer (C₆H₅K₃O₇/C₆H₈O₇ at pH 5, 6, 7 and 8) and potassium carbonate (K₂CO₃ at pH ∼13)] were evaluated to highlight the influence of the ionic liquid structure (cation core, anion and alkyl chain length), the pH and the salt nature on the formation of aqueous biphasic systems. The binodal curves and respective tie-lines reported for these systems were experimentally determined at (298 ± 1) K. In general, the ability to promote the aqueous biphasic systems formation increases with the pH and alkyl chain length. While the influence of the cation core and anion nature of the ionic liquids on their ability to form aqueous biphasic systems closely correlates with ionic liquids capacity to be hydrated by water, the effect of the different salts depends of the ionic liquid nature and salt valency.     

Effect of alkyl chain length and temperature on the thermodynamic properties of ionic liquids 1-alkyl-3-methylimidazolium bromide in aqueous and non-aqueous solutions at different temperatures

The alkyl chain length of 1-alkyl-3-methylimidazolium bromide ([Rmim][Br], R = propyl (C₃), hexyl (C₆), heptyl (C₇), and octyl (C₈)) was varied to prepare a series of room-temperature ionic liquids (RTILs), and experimental measurements of density and speed of sound at different temperatures ranging from (288.15 to 308.15) K for their aqueous and methanolic solutions in the dilute concentration region (0.01 to 0.30) mol · kg^?1 were taken. The values of the compressibilities, expansivity and apparent molar properties for [C_nmim][Br] in aqueous and methanolic solutions were determined at the investigated temperatures. The obtained apparent molar volumes and apparent molar isentropic compressibilities were fitted to the Redlich–Mayer and the Pitzer’s equations from which the corresponding infinite dilution molar properties were obtained. The values of the infinite dilution molar properties were used to obtain some information about solute–solvent and solute–solute interactions. The thermodynamic properties of investigated ionic liquids in aqueous solutions have been compared with those in methanolic solutions. Also, the comparison between thermodynamic properties of investigated solutions and those of electrolyte solutions, polymer solutions, cationic surfactant solutions and tetraalkylammonium salt solutions have been made.     

Surface Tension of Binary Mixtures of 1-Alkyl-3-Methyl-Imidazolium Bis(trifluoromethylsulfonyl)imide Ionic Liquids with Alcohols

New experimental surface tension data have been provided at 283.15, 298.15, 313.15 K and atmospheric pressure for binary mixtures of 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide and 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with the alcohols: methanol, ethanol, 1-propanol, 2-propanol, l-butanol and 1-pentanol. The experimental results show that the surface tensions of these mixtures depend systematically on the alkyl chain length of the ionic liquid and alcohol, composition and temperature. Surface tension changes on mixing have been calculated and adequately fitted by the Redlich–Kister polynomial equation. The adjustable parameters and the standard deviations between experimental and calculated values are reported.     

Thermophysical properties of binary mixtures of {ionic liquid 2-hydroxy ethylammonium acetate + (water,methanol, or ethanol)}

In this work, density and speed of sound data of binary mixtures of an ionic liquid consisting of {2-hydroxy ethylammonium acetate (2-HEAA) + (water, methanol, or ethanol)} have been measured throughout the entire concentration range, from the temperature of (288.15 to 323.15) K at atmospheric pressure. The excess molar volumes, variations of the isentropic compressibility, the apparent molar volume, isentropic apparent molar compressibility, and thermal expansion coefficient were calculated from the experimental data. The excess molar volumes were negative throughout the whole composition range. Compressibility data in combination with low angle X-ray scattering and NMR measurements proved that the presence of micelles formed due to ion pair interaction above a critical concentration of the ionic liquid in the mixtures. The Peng–Robinson equation of state coupled with the Wong–Sandler mixing rule and COSMO–SAC model was used to predict densities and the calculated deviations were lower than 3%, for binary mixtures in all composition range.     

Study of the solubility of CO2, H2S and their mixture in the ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate: Experimental and modelling

New experimental results are presented for the solubility of carbon dioxide, hydrogen sulfide in the ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate ([C₈mim][PF₆]) at temperatures range from (303.15 to 353.15) K and pressures up to about 2 MPa. The solubility of the mixture of CO₂/H₂S in [C₈mim][PF₆] under various feed compositions were also measured at temperatures of (303.15, 323.15 and 343.15) K and the pressure up to 1 MPa. The solubility of carbon dioxide and hydrogen sulfide increased with increasing pressure and decreased with increasing temperature and the solubility of H₂S is about three times that of CO₂ in the particular ionic liquid studied. The measured data were correlated using extended Henry’s law included Pitzer’s virial expansion for the excess Gibbs energy, and the generic Redlich–Kwong cubic equation of state proposed for gas/ionic liquid systems. The correlations from the two models show quite good consistency with the experimental data for CO₂/IL and H₂S/IL binary mixtures within experimental uncertainties. For CO₂/H₂S/IL ternary mixtures, the RK model shows better correlation with the experimental values. We also studied the effect of cation alkyl chain length on the CO₂ and H₂S solubility by comparison of the experimental data of this study with those of previous reports. As the cation alkyl chain length became longer, the solubility of CO₂ and H₂S increased in the ionic liquid. Additionally, the influence of the anion on the solubility is studied by comparing the solubility of CO₂ and H₂S in [C₈mim][PF₆] with those in [C₈mim][Tf₂N]. As a result, CO₂ and H₂S have higher solubility in the IL with [Tf₂N]⁻ as the anion.     

Temperature dependence of the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate in aqueous solution

Many applications of ionic liquids (ILs) are closely related with their microstructure in mixtures. For example, morphology and pore size of the MCM-41 prepared in aqueous ILs are greatly dependent on the aggregation behavior of the ILs in water. Therefore, the study on the microstructure of ILs in aqueous solutions is of great importance. In this work, ¹H NMR, dynamic light scattering and attenuated total reflection infrared spectroscopy have been used to investigate the temperature effect on the structures of aqueous 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) solutions. It was shown that the size of the IL aggregates becomes larger with decreasing temperature. When the system temperature is below the upper critical solution temperature (UCST) of the binary mixture at about 4 °C, the aggregate size of the IL is larger than 1000 nm. Additionally, the two-dimensional IR results reveal that at low IL concentrations, H₂O can interact with [BF₄]⁻ prior to the CH groups of the imidazolium ring, whereas cation and anion of the IL tend to form aggregate at high IL concentrations. With the decrease of temperature, the interactions between cation and anion of the IL become stronger, but those between the IL and water become weaker, thereby resulting in the growth of the aggregate of cation with anion of the IL. This result may give a reasonable explanation for the origin of the UCST behavior of aqueous [C₄mim][BF₄] solution.     

Liquid–liquid equilibrium data for mono ethylene glycol extraction from water with the new ionic liquid tetraoctyl ammonium 2-methyl-1-naphtoate as solvent

Thermal recovery of mono ethylene glycol (MEG) from aqueous streams is one of the most energy demanding operations in industry, because of the large amount of water that needs to be evaporated. The use of alternative technologies such as liquid–liquid extraction could save energy. A new tailor made ionic liquid (IL), tetraoctyl ammonium 2-methy-1-naphtoate [TOA MNaph] was designed in a previous stage of our research on MEG recovery from aqueous streams (Garcia-Chavez et al., 2011) [3]. Here, we report the liquid–liquid equilibrium data for the MEG + water + [TOA MNaph] system at atmospheric pressure for three different temperatures, (313.2, 333.2 and 353.2) K. The experimental equilibrium data was correlated using the NRTL and UNIQUAC thermodynamic models. Both models were able to describe the system adequately, root square mean deviations (RMSD) of 1.34% and 0.89% were obtained respectively.