Solid‐phase incorporation of gaseous carbon dioxide into oxirane‐containing copolymers

Carbon dioxide was incorporated into poly(glycidyl methacrylate‐co‐methyl methacrylate) by a solid‐phase reaction, which transformed the pendent oxirane moieties into cyclic carbonate moieties, with quaternary ammonium halide catalysts. The incorporation of carbon dioxide into the copolymer led to soluble carbonate‐containing polymers, whereas the incorporation of carbon dioxide into the glycidyl methacrylate homopolymer produced an insoluble product. The copolymer composition, reaction temperature, and catalyst amount affected the incorporation efficiency and the side reaction that caused crosslinking. Effective incorporation was achieved under the following reaction conditions: the glycidyl methacrylate content was less than approximately 50%, the temperature was greater than the glass‐transition temperature, and the catalyst concentration was 1.5–6 mol %. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3812–3817, 2004     

A kinetic study on the reaction between glycidyl vinyl ether and carbon dioxide with quaternary ammonium salts as catalyst

The kinetics of the reaction between glycidyl vinyl ether (GVE) and carbon dioxide has been studied by using quaternary ammonium salts as catalyst. The catalysts having larger cations and more nucleophilic counter-anions showed higher activity. In a semi-batch reactor where CO₂ is continuously supplied, the reaction is first order with respect to the concentration of GVE. In a high pressure batch reactor, the reaction is first order with respect to both GVE and CO₂ and second order overall. In the latter case, a simple method to evaluate the rate constant and Henry's constant is also proposed.     

Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

Synthesis of propylene carbonate from carbon dioxide using trans‐dichlorotetrapyridineru‐ thenium(II) as catalyst

trans‐Dichlorotetrapyridineruthenium(II) [trans‐RuCl₂(py)₄] was synthesized and the structure was determined by single crystal X‐ray crystallography. Highly efficient formation of propylene carbonate (PC) from carbon dioxide and propylene oxide was achieved by using a catalyst system composed of trans‐RuCl₂(py)₄ and hexadecyl trimethyl ammonium bromide under mild conditions (4h, 80 °C, 3.0 MPa). PC was obtained in nearly 100% selectivity without the formation of a polymer. The catalyst could be recycled constantly many times without any significant loss of its catalytic activity. On the basis of the results, a mechanism for the reaction was proposed. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Polymer‐supported pyridinium catalysts for synthesis of cyclic carbonate by reaction of carbon dioxide and oxirane

Polymer‐supported pyridinium salts, prepared by quaternarization of crosslinked poly(4‐vinylpyridine) with alkyl halides, effectively catalyze the reaction of carbon dioxide (1 atm) and glycidyl phenyl ether (GPE) to afford the corresponding five‐membered cyclic carbonate (4‐phenoxymethyl‐1,3‐dioxolan‐2‐one). Poly(4‐vinylpyridine) quarternarized with alkyl bromides show high catalytic activities, and the reaction of carbon dioxide (1 atm) and GPE at 100 °C affords 4‐phenoxymethyl‐1,3‐dioxolan‐2‐one quantitatively in 6 h. The rate constant in the reaction of GPE and carbon dioxide in N‐methyl pyrrolidinone using poly(4‐vinylpyridine) quarternarized with n‐butyl bromide (k_obs = 102 min^?1) is almost comparable with those for homogeneous catalysts with good activities (e.g., LiI), and the rate of the reaction obeys the first‐order kinetics. A used catalyst may be recovered by centrifugation, and the recycled catalyst also promotes the reaction of GPE and carbon dioxide. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5673–5678, 2007     

Synthesis of thermo‐responsive microgels in supercritical carbon dioxide using ethylene glycol dimethacrylate as a cross‐linker

Herein, we report the preparation of thermo‐responsive polymers in a green medium. The white, dry, fine powders were obtained directly from the cross‐linking polymerization of N‐isopropylacrylamide (NIPA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 10 to 28 MPa utilizing ethylene glycol dimethacrylate (EGDMA) as a cross‐linker. The effects of reaction pressure, cross‐linker ratio, initiator concentration, and reaction time were investigated. In the presence of this cross‐linker (26.4% w/w), much smaller poly(N‐isopropylacrylamide) (PNIPA) microgels (<0.2 µm diameter) were formed, and it was shown that the particle size and the morphology of the polymer were strongly dependent on the cross‐linker ratio in scCO₂. Copyright © 2009 John Wiley & Sons, Ltd.     

Fixation of carbon dioxide into aliphatic polycarbonate,cobalt porphyrin catalyzed regio‐specific poly(propylene carbonate) with high molecular weight

Cobalt porphyrin complex (TPPCo^IIIX) (TPP = 5, 10, 15, 20‐Tetraphenyl‐ porphyrin; X = halide) in combination with ionic organic ammonium salt was used for the regio‐specific copolymerization of propylene oxide and carbon dioxide. A turnover frequency of 188 h^?1 was achieved after 5 h, and the byproduct propylene carbonate was successfully controlled to below 1%, where the obtained poly(propylene carbonate) (PPC) showed number average molecular weight (M_n) of 48 kg/mol, head‐to‐tail content of 93%, and carbonate linkage of over 99%. When the polymerization time was prolonged to 24 h, PPC with M_n over 115 kg/mol and head‐to‐tail linkage maintaining 90% was prepared, whose glass transition temperature reached 44.5 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5959–5967, 2008     

Synthesis,characterization, and self‐assembly of ion‐bonded A2B rod‐coil copolymer with oligo(para‐phenyleneethynylene) as rod segment

Supramolecular A₂B rod‐coil copolymer, composed of two polystyrene (PSt) arms and one oligo(para‐phenyleneethynylene) (OPE) arm linked via ionic bond, has been designed and successfully synthesized. First, a trifunctional initiator, methyl 1,3‐bis(bromomethyl)benzonate, was prepared and used to initiate the polymerization of styrene under atom transfer radical polymerization (ATRP) condition to provide polystyrene (PSt) carrying monoester group at the middle of polymer chain. Then, the ester group was transferred into tertiary amino group to give amino‐functionalized PSt, (PSt)₂? N(CH₃)₂. Subsequently, the ion‐bonded rod‐coil copolymer, (PSt)₂? OPE, was obtained by the reaction of (PSt)₂? N(CH₃)₂ with carboxy‐terminated OPE (OPE? COOH). The resulting copolymer was characterized by nuclear magnetic resonance (NMR), Fourier transformer infrared (FTIR), and gel permeation chromatography (GPC) techniques. Vesicles and spherical micelles were generated from this supramolecular rod‐coil copolymer through the manipulation of the initial polymer concentration in toluene. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7667–7676, 2008     

Thermoreversible gelation of helical polypeptide/single‐walled carbon nanotubes and their solid‐state structures

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate)s (PBLGs) having well‐defined polymer molecular weight (M_n = 7.5–21.1 kg·mol^?1) and molecular weight distribution (PDI = 1.05–1.20) by a graft‐to method. Toluene solutions containing 5 wt % free PBLG and variable amounts of PBLG‐functionalized SWCNTs (PBLG‐SWCNTs) form gels at room temperature. Differential scanning calorimetry (DSC) analysis reveals that the gelation occurs thermoreversibly, in accord with previous studies on the pristine PBLG/toluene gels. The heat of gel melting (ΔH_m) is slightly elevated for the composite gels compared with the pristine gel, which suggests enhanced interactions between PBLGs in the former. But the gelation temperatures of the composites are unaffected by the presence of PBLG‐SWCNTs. Small‐angle X‐ray scattering (SAXS) analysis of the composite and pristine gels at different temperatures by the Guinier method suggests that PBLG‐SWCNTs promote interactions between PBLG rods, as indicated by the larger PBLG bundle size with increasing PBLG‐SWCNT content in the gel and the melt state. W/SAXS analysis of the dry gels reveals that PBLG‐SWCNTs induce significant changes in the PBLG packing order, resulting in a nematic phase, in contrast to a weakly ordered smectic C phase containing tilted PBLG rods that is observed in the pristine gel. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Alternating copolymerization of carbon dioxide and propylene oxide catalyzed by (R,R)‐SalenCoIII‐ (2,4‐dinitrophenoxy) and Lewis‐basic cocatalyst

A binary catalyst system of a chiral (R,R)‐SalenCo^III(2,4‐dinitrophenoxy) (salen = N,N‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐diphenylethylenediimine) in conjunction with (4‐dimethylamino)pyridine (DMAP) was developed to generate the copolymerization of carbon dioxide (CO₂) and racemic propylene oxide (rac‐PO). The influence of the molar ratio of catalyst components, the operating temperature, and reaction pressure on the yield as well as the molecular weight of polycarbonate were systematically investigated. High yield of turnover frequency (TOF) 501.2 h^?1 and high molecular weight of 70,400 were achieved at an appropriate combination of all variables. The structures of as‐prepared products were characterized by the IR, ¹H NMR, ¹³C NMR measurements. The linear carbonate linkage, highly regionselectivity and almost 100% carbonate content of the resulting polycarbonate were obtained with the help of these effective catalyst systems under facile conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5050–5056, 2007     

Novel hepatoma‐targeting micelles based on chemoenzymatic synthesis and self‐assembly of galactose‐functionalized ribavirin‐containing amphiphilic random copolymer

Hepatoma‐targeting micelles were successfully prepared by self‐assembly of galactose‐functionalized ribavirin‐containing amphiphilic random copolymer as novel drug delivery vehicles. The ribavirin‐containing random copolymer with galactose as the targeting ligand was facilely synthesized by combining enzymatic transesterification with radical polymerization and fully characterized by FTIR, NMR, and GPC. The formation of micelle‐type aggregates from the random copolymer was verified by UV–vis and fluorescence spectroscopy using pyrene as the guest molecule. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) experiments revealed that the micelles were well dispersed as spherical nanoparticles in water, whose hydrodynamic diameter was 217 ± 19 nm. Their biological recognition to fluorescein‐labeled peanut agglutinin investigated by confocal laser scanning microscopy (CLSM) proved the existence of hydrophilic galactose targeting moieties on the surface of micelles. Cell cytotoxicity tests and the inhibition experiment of galactose performed by MTT assay showed that the micelles had evident targeting function to hepG2 cells and the galactose moieties on the surface of micelles mediated cellar uptake of micelles. In vitro release studies indicated that ribavirin could be slowly released from the copolymer with pseudo zero‐order kinetics. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2734–2744, 2008     

Novel self‐assembling polymeric system based on a hydrophobic modified copolymer: formulation,rheological characterization,and performance in enhanced heavy oil recovery

This work presents the chemical formulation and rheological properties of a novel self‐assembling polymer (SAP) system derived from a hydrophobically modified sulfonated polyacrylamide (HMSPAM). This polymeric association was established through complexation between the pendant hydrophobic groups contained in HMSPAM and β‐cyclodextrin molecules. The new SAP system offers improved viscoelastic properties because of the “interlocking effect” of the hydrophobic groups into β‐cyclodextrin cavities. It also provides suitable reformability upon mechanical shear when compared to the base HMSPAM. Furthermore, SAP exhibits superior tolerance to elevate brine salinity and hardness, as well as high reservoir temperature. Sandpack flooding tests conducted at simulated reservoir conditions (Pelican Lake reservoir, Alberta, Canada) indicate that this system shows superior mobility control (resistance factor) compared to HMSPAM. It also shows potential as in situ permeability modifier, which makes this polymeric system particularly suitable for heavy oil recovery applications. For instance, the newly developed SAP produced 20% more incremental heavy oil recovery if compared to the performance of the commonly used partially hydrolyzed polyacrylamide and 7% more incremental oil recovery than the baseline HMSPAM at the same experimental conditions. Overall, this new self‐assembly system shows potential for applications in heavy oil recovery. Copyright © 2014 John Wiley & Sons, Ltd.     

Emulsion copolymerization of D,L‐lactide and glycolide in supercritical carbon dioxide

Biodegradable polyesters were synthesized via an emulsion polymerization in supercritical carbon dioxide (SC‐CO₂). Copolymers of lactide and glycolide were synthesized in SC‐CO₂ with stannous octoate as the ring‐opening catalyst and a fluorocarbon polymer surfactant as an emulsifying agent. The conversion of lactide and glycolide was monitored with respect to the reaction time and temperature with ¹H NMR spectroscopy. The conversion of glycolide surpassed 99% within 72 h for an SC‐CO₂ phase maintained at 200 bar and 70 °C. Under the same conditions, lactide conversion reached 65% after 72 h of polymerization. Unpolymerized monomer was removed after the reaction by extraction with an SC‐CO₂ mobile phase. The molecular weights of all the copolymers were measured by gel permeation chromatography. Weight‐average molecular weights (M_w) ranged between 2500 and 30,200 g/mol and polydispersity indices ranged from 1.4 to 2.3 for polymerization times of 6 and 48 h, respectively. Although the molecular weight increased significantly during the first 48 h of reaction, there was no significant difference in the M_w for polymerization times of 48 and 72 h. Emulsion polymerization within the benign solvent SC‐CO₂ demonstrated improved conversion and molecular weight versus polymers synthesized without surfactant. The emulsion polymerization of lactide and glycolide copolymers in SC‐CO₂ is proposed as a novel production technique for high‐purity, biodegradable polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 562–570, 2001     

Copolymerization of carbon dioxide and cyclohexene oxide with zinc/β‐ketoiminato complexes: Investigating the influence of the electron structure of zinc/β‐ketoiminato complexes on the catalytic activity and resultant copolymer properties

A series of LZnX zinc/β‐ketoiminato complexes [L = CH₃C(OH)?C(CH₂CH?CH₂)C(CH₃)?NAr ( L₁ ), CH₃C(OH)?C(CH₂CH₂CN)C(CH₃)?NAr ( L₂ ), CH₃C(OH)?C(CH₂C₆H₅)C(CH₃)?NAr ( L₃ ), or CH₃C(OH)?CHC(CH₃)?NAr ( L₄ ); Ar = 2,6‐ⁱPr₂C₆H₃; and initiation group X = alcoholate or acetate (for L₁ ) or alcoholate (for L₂ – L₄ )] were synthesized, and their activities toward the copolymerization of carbon dioxide with cyclohexene oxide were determined. The 3‐position substituents on the β‐ketoiminato ligand backbone of the zinc/β‐ketoiminato complexes played an important role not only in the catalytic activity but also in the intrinsic viscosity, chemical composition, and refined microstructure of the resultant copolymers. The order of the catalytic activity of L₁ ZnX with different initiation groups (X = OMe, OⁱPr, or OAc) was L₁ Zn (OⁱPr) > L₁ Zn (OMe) > L₁ Zn (OAc), being the opposite of the order of the leaving ability of the initiation groups. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6243–6251, 2006     

Insights into poly(3‐hexylthiophene)‐b‐poly(ethylene oxide) block copolymer: Synthesis and solvent‐induced structure formation in thin films

We report the synthesis, characterization, and solvent‐induced structure formation in thin films of an amphiphilic rod‐coil conjugated block copolymer, poly(3‐hexylthiophene)‐b‐poly(ethylene oxide). The diblock copolymers were prepared by a facile click reaction and their characterizations as well as thermal, crystalline, optical properties, and self‐assembly behavior have been investigated in detail. A series of morphologies including two‐phase separated nanostructure, nanofibrils, and their mixed morphology could be obtained depending on the selectivity of solvents to different blocks. Structural analyses demonstrate there is a subtle balance between microphase separation of copolymer and the π‐π stacking of the conjugated P3HT and such balance can be controlled by changing the solvents of different selectivity in solution and the length of P3HT block. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of cyclo‐olefin copolymer latexes and their carbon nanotube composite nanoparticles

An efficient and environmentally benign synthetic method for the production of the stabilized cyclo‐olefin copolymer latexes and their carbon nanotube composite nanoparticles has been developed using an emulsion ring opening metathesis copolymerization catalyzed by the 2nd generation Grubbs catalyst in aqueous solution. Homopolymerizations of norbornene (NB) and dicyclopentadiene (DCPD) in aqueous solution yield unstable polymer latexes in combination with a large amount of their flocculation fractions. Copolymerizations of NB or DCPD with a selected liquid cyclo‐olefin comonomer dramatically improve not only the colloidal stability of the copolymer latexes but also the thermal stability of the copolymer nanoparticles. The liquid cyclo‐olefin comonomer plays a double role as a liquefied agent for the solid NB and DCPD monomers before the emulsification treatment, and a reactive comonomer itself to control entirely the copolymerization system. The as‐prepared cyclo‐olefin copolymer latexes exhibit an exceptionally high compatibility with a well‐dispersed carbon nanotube (CNT) in aqueous solution due to strong π–π interactions between the graphitic surfaces of the CNT with the C‐C double bonds located on the cyclo‐olefin copolymer main chains. Accordingly, a binary blending of these two well‐dispersed colloidal systems in aqueous solution led to the fabrication, for the first time, of the highly electrical conductive cyclo‐olefin copolymer/CNT composite nanoparticles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4584–4591     

Solid state self‐assembly of the single‐walled carbon nanotubes and poly(γ‐benzyl‐l‐glutamate)s with different conformations

A series of pyrenyl‐terminated poly(γ‐benzyl‐l ‐glutamate)s (py‐PBLGs) with controlled polymer molecular weight (M_W = 2.3–14.8 kg mol^?1) and molecular weight distribution (PDI = 1.17–1.55) have been prepared from 1‐pyrenemethylamine hydrochloride‐mediated ring‐opening polymerization (ROP) of γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride (BLG‐NCA). FTIR analysis revealed that the py‐PBLG₉ was conformationally heterogeneous with 35.0% α‐helix, 55.6% β‐sheet, and 9.4% random coil conformations in the solid state, whereas the py‐PBLG₆₆ adopts 100% α‐helix conformation. Py‐PBLGs promote the dispersion of SWCNTs in organic solvents and in the PBLG solid through π–π interaction, as evidenced by the Raman spectroscopic studies. WAXD analysis revealed that the SWCNTs significantly affect the ordering of the py‐PBLG self‐assembly: the long range hexagonal packing of py‐PBLG₆₆ rods is notably enhanced by the addition of SWCNTs, whereas the lamellar packing of py‐PGLG₉ β‐sheets is weakened. In the hexagonal lattice, the SWCNTs are intercalated parallel to the py‐PBLG₆₆ rods, in contrast to the normal orientation of the SWCNTs with respect to the extended py‐PBLG₉ chains in the β‐sheets. The relative packing structure also affects the intermolecular interaction among the PBLGs: SWCNTs promote the interaction among the py‐PBLG₉ chains packed in a lamellar structure and weaken the intermolecular interaction among the py‐PBLG₆₆ columnar hexagonal array. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4489–4497     

Formation and characterization of gaseous adducts of carbon dioxide to magnesium, (CO2)MgX- (X=OH, Cl, Br)

A good fix: the structure and chemical reactivity of a reduced form of CO(2) bonded to magnesium, XMg(η(2)-O(2)C)(-), is reported. Upon reaction with water it loses CO, while it adds CH(3) upon reaction with alkyl halides, thereby signifying nucleophilicity of the carbon atom in XMg(η(2)-O(2)C)(-) in S(N)2 reactions.