Blue light‐emitting hyperbranched polymers using fluorene‐co‐dibenzothiophene‐S,S‐dioxide as branches

A series of blue light‐emitting hyperbranched polymers comprising poly(fluorene‐co‐dibenzothiophene‐S,S‐dioxide) as the branch and benzene, triphenylamine, or triphenyltriazine as the core were synthesized by an “A₂ + A₂' + B₃” approach of Suzuki polymerization, respectively. All resulted copolymers exhibited quite comparable thermal properties with the glass transition temperatures in the range of 59–68 °C and relatively high decomposition temperatures over 420 °C. Photoluminescent spectra exhibited slight variation with the molar ratio of the dibenzothiophene‐S,S‐dioxide unit and the size of the core units. Polymer light‐emitting devices demonstrated blue emission with excellent stability of electroluminescence. Copolymers based on smaller core units of benzene and triphenylamine exhibited enhanced device performances regarding to that of triphenyltriazine. With the device configuration of ITO/PEDOT:PSS/polymer/CsF/Al, a maximum luminous efficiency of 4.5 cd A^?1 was obtained with Commission Internationale de L'.Eclairage (CIE) coordinates of (0.16, 0.19) for the copolymer PFSO15B. These results indicated that hyperbranched structure can be a promising strategy to attain spectrally stable blue‐light‐emitting polymers with high efficiency. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1043–1051     

Synthesis and characterization of optically active helical vinyl polymers via free radical polymerization

A facile synthetic route to prepare the dual‐functional molecule, 2,5‐bis(4′‐carboxyphenyl)styrene, was developed. The esterification of this compound with chiral alcohols, that is, (S)‐(+)‐sec‐butanol/(R)‐(?)‐sec‐butanol, (S)‐(+)‐sec‐octanol/(R)‐(?)‐sec‐octanol, and D ‐(+)‐menthol/L ‐(?)‐menthol, respectively, yielded three enantiomeric pairs of novel vinyl monomers, which underwent radical polymerization to obtain helical polymers with an excess screw sense. These polymers exhibited optical rotations as large as fourfold those of the corresponding monomers. Their helical conformations were quite stable as revealed by the almost unchanged chiroptical properties measured at different temperatures. The polymers with linear alkyl tails in the side‐groups formed irreversibly columnar nematic phases in melt although the corresponding monomers were not liquid crystalline. Whereas, the polymers with cyclic tails generated no mesophase. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2408–2421, 2009     

Phenothiazine‐S,S‐dioxide‐ and fluorene‐based light‐emitting polymers: Introduction of e−‐deficient S,S‐dioxide into e−‐rich phenothiazine

A novel series of poly(10‐hexyl‐phenothiazine‐S,S‐dioxide‐3,7‐diyl) and poly(9,9′‐dioctyl‐fluorene‐2,7‐diyl‐alt‐10‐hexyl‐3,7‐phenothiazine‐S,S‐dioxide) (PFPTZ‐SS) compounds were synthesized through Ni(0)‐mediated Yamamoto polymerization and Pd(II)‐catalyzed Suzuki polymerization. The synthesized polymers were characterized by ¹H NMR spectroscopy and elemental analysis and showed higher glass transition temperatures than that of pristine polyfluorene. In terms of photoluminescence (PL), the PFPTZ‐SS compounds were highly fluorescent with bright blue emissions in the solid state. Light‐emitting devices were fabricated with these polymers in an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration. The electroluminescence (EL) of the copolymers differed from the PL characteristics: the EL device exhibited a redshifted greenish‐blue emission in contrast to the blue emission observed in the PL. Additionally, this unique phenothiazine‐S,S‐dioxide property, triggered by the introduction of an electron‐deficient SO₂ unit into the electron‐rich phenothiazine, gave rise to improvements in the brightness, maximum luminescence intensity, and quantum efficiency of the EL devices fabricated with PFPTZ‐SS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1236–1246, 2007     

(RS)‐Propranolol: enantioseparation by HPLC using newly synthesized (S)‐levofloxacin‐based reagent,absolute configuration of diastereomers and recovery of native enantiomers by detagging

Diastereomers of (RS)‐propranolol were synthesized using (S)‐levofloxacin‐based new chiral derivatizing reagents (CDRs). Levofloxacin was chosen as the pure (S)‐enantiomer for its high molar absorptivity (ε_o ～ 24000) and availability at a low price. Its ‐COOH group had N‐hydroxysuccinimide and N‐hydroxybenzotriazole, which acted as good leaving groups during nucleophilic substitution by the amino group of the racemic (RS)‐propranolol; the CDRs were characterized by UV, IR, ¹H‐NMR, high resolution mass spectrometry (HRMS) and carbon, hydrogen, nitrogen, and sulphur fundamental elemental components analyser (CHNS). Diastereomers were separated quantitatively using open column chromatography; absolute configuration of the diastereomers was established and the reagent moiety was detagged under microwave‐assisted acidic conditions. (S)‐ and (R)‐propranolol as pure enantiomers and (S)‐levofloxacin were separated, isolated and characterized. Optimized lowest‐energy structures of the diastereomers were developed using Gaussian 09 Rev. A.02 program and hybrid density functional B3LYP with 6‐31G* basis set (based on density functional theory) for explanation of elution order and configuration. In addition, RP HPLC conditions for separation of diastereomers were optimized with respect to pH, concentration of buffer, flow rate of mobile phase and nature of organic modifier. HPLC separation method was validated as per International Conference on Harmonization guidelines. With the systematic application of various analytical techniques, absolute configuration of the diastereomers (and the native enantiomers) of (RS)‐propranolol was established. Copyright © 2016 John Wiley & Sons, Ltd.     

Stereoregular polyamides entirely based on tartaric acid

Two new stereoregular polyamides, namely PTA‐LL and PTA‐LD, derived from (2S,3S)‐(−)‐2,3‐dimethoxy‐1,4‐butanediamine and (2R,3R)‐(+)‐ or (2S,3S)‐(−)‐2,3‐dimethoxybutanedioic acid are described. The two diastereoisomeric polymers contain two pairs of stereocenters in the main chain of the repeating unit, one in the diamine and the other in the diacid counterpart. L and D refer to the configuration of the tartaric acid unit from which they proceed. These polyamides were prepared by polycondensation in solution and were fully characterized by elemental analysis, DSC, and IR/NMR spectroscopies. Number average molecular weights around 30,000 were estimated by GPC and viscosimetry. Both compounds are soluble in water and display large optical activity. CD and ¹H‐NMR measurements in chloroform solution suggested the presence of definite secondary structures in this solvent. Solid samples were found to crystallize upon annealing and the crystal structure of both polyamides was investigated by X‐ray diffraction. PTA‐LL crystallized in an orthorhombic lattice in the space group P22₁2₁ whereas PTA‐LD seemed to adopt a P1 triclinic structure. In both cases the polymer chain appears to be in a folded conformation more contracted than in the common γ‐form of conventional nylons. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 983–993, 1999     

Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Novel approach to well‐defined polyester by living anionic alternating copolymerization of ethylphenylketene with 4‐methoxybenzaldehyde

A living anionic alternating copolymerization of ethylphenylketene (EPK) with 4‐methoxybenzaldehyde (MBA) was achieved. When n‐butyllithium was added to a mixture of EPK and MBA in tetrahydrofuran at ?40 °C in the presence of an excess amount of lithium chloride, the copolymerization of these monomers proceeded via complete 1:1 alternating manner to afford the polymer with a narrow molecular weight distribution. A linear relationship was observed between the molecular weight and the monomer/initiator ratio, keeping a narrow molecular weight distribution. The structure of the obtained polymer was determined to be a polyester by IR spectroscopy together with the reductive degradation of the polymer by lithium aluminum hydride, which quantitatively afforded the corresponding diol to the repeating unit of the expected polyester structure. Both conversions of EPK and MBA agreed to a first‐order kinetic equation with linear evolution between the molecular weight and conversion. These observations along with the successful results in two‐stage polymerization indicate that the present copolymerization proceeded through a living mechanism. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2078–2084, 2001     

Efficient asymmetric addition of diethylzinc to aldehydes using C2‐novel chiral pyridine β‐amino alcohols as chiral ligands

A series of novel C₂‐symmetric chiral pyridine β‐amino alcohol ligands have been synthesized from 2,6‐pyridine dicarboxaldehyde, m‐phthalaldehyde and chiral β‐amino alcohols through a two‐step reaction. All their structures were characterized by ¹H NMR, ¹³C NMR and IR. Their enantioselective induction behaviors were examined under different conditions such as the structure of the ligands, reaction temperature, solvent, reaction time and catalytic amount. The results show that the corresponding chiral secondary alcohols can be obtained with high yields and moderate to good enantiomeric excess. The best result, up to 89% ee, was obtained when the ligand 3c (2S,2′R)‐2,2′‐((pyridine‐2,6‐diylbis(methylene))bisazanediyl))bis(4‐methyl‐1,1‐diphenylpentan‐1‐ol) was used in toluene at room temperature. The ligand 3g (2S,2′R)‐2,2′‐((1,3‐phenylenebis(methylene))bis(azanediyl))bis(4‐methyl‐1,1‐diphenylpentan‐1‐ol) was prepared in which the pyridine ring was replaced by the benzene ring compared to 3c in order to illustrate the unique role of the N atom in the pyridine ring in the inductive reaction. The results indicate that the coordination of the N atom of the pyridine ring is essential in the asymmetric induction reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a high‐performance liquid chromatography method for the simultaneous determination of chiral impurities and assay of (S)‐clopidogrel using a cellulose‐based chiral stationary phase in methanol/water mode

A simple reversed‐phase high‐performance liquid chromatography method for the chiral separation of the active pharmaceutical ingredient (S)‐clopidogrel has been developed on the cellulose‐based Chiralcel OJ‐RH chiral stationary phase. The S enantiomer was baseline resolved from its R impurity (impurity C) with a mobile phase consisting of methanol/water (100:15) without any interference coming from the other two potential chiral impurities A and B. The enantio‐ and chemoselective method was partially validated and compared with that reported in the United States Pharmacopoeia for the drug product. The versatility of the Chiralcel OJ‐RH allowed separating the enantiomers of the impurity B also under normal phase and setting up an efficient strategy to convert the racemic sample into the enantiomeric S form on a semipreparative scale.     

Asymmetric radical cyclization of (2S,3S)-2,3-butanediyl, (2S,4S)-2,4-pentanediyl,and (2S,5S)-2,5-hexanediyl bis(4-vinylbenzoate)s as a model reaction for asymmetric cyclocopolymerization

The asymmetric cyclocopolymerization of bis(4-vinylbezoate) of a chiral diol with styrene is a promising method for the preparation of optically active polystyrene derivatives because of main-chain chirality. However, the mechanism for chirality induction from the chiral diol to the main chain is still unknown. To clarify the chirality induction mechanism, we carried out the radical cyclizations of (2S,3S)-2,3-butanediyl bis(4-vinylbenzoate), (2S,4S)-2,4-pentanediyl bis(4-vinylbenzoate), and (2S,5S)-2,5-hexanediyl bis(4-vinylbenzoate) with tri-n-butyltin hydride or allyltri-n-butyltin as a chain-transfer reagent as model reactions for asymmetric cyclocopolymerization. The absolute configuration was determined with single-crystal X-ray crystallography and a circular dichroism exciton chirality method. The distribution of the stereoisomer showed (R)-configuration selectivity (21–34% diastereomeric excess) in the intramolecular cyclization and an extremely low extent (<1%) of the (S,S)-cyclized product among the four stereoisomers. Therefore, chirality induction is caused by the selective inhibition of the (S,S)-racemo configuration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4671–4681, 2004     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Liquid chromatographic enantioseparation of (RS)‐etodolac using (S)‐levofloxacin and determination of absolute configuration of the diastereomeric derivatives

(RS)‐Etodolac was isolated from commercial tablets and was purified and characterized to be used as racemic standard. A pair of diastereomeric derivatives was synthesized using (S)‐levofloxacin as a chiral derivatizing reagent. The derivatization reaction was carried out under conditions of stirring at room temperature (30°C for 1.5 h) as well as under microwave irradiation; the derivatives obtained by the two methods were compared. Reaction conditions for derivatization were optimized with respect to mole ratio of chiral derivatizing reagent and (RS)‐etodolac. No racemization was observed throughout the study. Separation of diastereomeric derivatives was successful using C₁₈ column and a binary mixture of methanol and triethyl ammonium phosphate buffer of pH 4.5 (80:20, v/v) as mobile phase at a flow rate of 1 mL min^?1 and UV detection at 223 nm. An efficient approach for recognizing chirality and determining the absolute configuration of the diastereomeric derivatives of (RS)‐etodolac is described, which in turn is a measure of the enantiomeric purity of (RS)‐etodolac since the diastereomeric derivatives were separated and isolated using preparative thin‐layer chromatography.     

Molecular structures of regioisomeric 7‐arylidene hexahydroindazoles from 1H NMR spectra

The structural characterization of two regioisomeric products of the interaction of 2,6‐bis‐(4‐methoxybenzylidene)‐3R‐methylcyclohexanone with methyl hydrazine was achieved using ¹H NMR spectral data, including chemical shifts, coupling constants and results of COSY and nuclear overhauser effect (NOE) experiments. Configurations of the new chiral centers in the (3S,3aR,6R,7E)‐7‐(4‐methoxybenzylidene)‐3,4,5,7‐hexahydro‐3‐(4‐methoxyphenyl)‐2,6‐dimethyl‐ and 2,4‐dimethyl‐2H‐indazoles were assigned on the basis of experimental data combined with molecular modeling by the density functional theory (DFT) method. The distinction in the helical twisting power of studied compounds under addition to a nematic liquid crystal is discussed on the basis of peculiarities of the molecular structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal and X‐ray powder diffraction studies of aliphatic polyester dendrimers

The syntheses and thermal and X‐ray powder diffraction analyses of three sets of aliphatic polyester dendrimers based on 2,2‐bis(hydroxymethyl)propionic acid as a repeating unit and 2,2‐dimethyl‐1,3‐propanediol, 1,5‐pentanediol, and 1,1,1‐tris(hydroxymethyl)ethane as core molecules are reported. These dendritic polyesters were prepared in high yields with the divergent method. The thermal properties of these biodendrimers were evaluated with thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the compounds occurred around 250 °C for the hydroxyl‐ended dendrimers and around 150 °C for the acetonide‐protected dendrimers. In addition, the crystallinity of the lower generation dendrimers was evaluated with X‐ray powder diffraction. The highest crystallinity and the highest melting points were observed for the first‐generation dendritic compounds. The higher generation dendrimers showed weaker melting transitions during the first heating scan. Only the glass‐transition temperatures were observed in subsequent heating scans. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5574–5586, 2004     

(S)‐Naproxen as a platform to develop chiral derivatizing reagent for reversed‐phase high‐performance liquid chromatographic enantioseparation of analytes having a carbonyl functional group

(S)‐Naproxen was used to synthesize a chiral reagent, (S)‐2‐(6‐methoxynaphthalen‐2‐yl)propanehydrazide, by itsreaction with hydrazine hydrate in the presence of dicyclohexylcarbodiimide as coupling agent. The reagent was characterized and its chiral purity was established. It was used as a chiral derivatizing reagent for the synthesis of hydrazone diastereomers, under microwave irradiation, of certain chiral aldehydes and ketones. The respective diastereomers were separated by reversed‐phase high‐performance liquid chromatography using a binary solvent combination containing trifluoroacetic acid. The diastereomers were detected at 231 nm. The method was validated for accuracy, precision, and limit of detection (LOD). For a series of hydrazones the LOD was found to be in the range 1.62–1.65 pmol/mL. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of dendronized,chiral conjugated polymers with appendant Fréchet‐type dendrons

New chiral binaphthyl‐based polyarylenes [(S)‐ 3a and (S)‐ 3b ] with appendant Fréchet‐type poly(aryl ether) dendrons (first generation and second generation) were synthesized with Suzuki polycondensation from chiral (S)‐6,6′‐dibromo‐2,2′‐didendron‐substituted 1,1′‐binaphthyl derivatives and p‐phenylene diboronic acid. The polymers were studied with circular dichroism, fluorescence, and ultraviolet–visible spectra. Laser light scattering measurements of (S)‐ 3a and (S)‐ 3b showed that their weight‐average molecular weights were 2.39 × 10⁵ and 1.09 × 10⁴, respectively. The specific optical rotation [α]_D was ?59.6 for (S)‐ 3a and ?62.7 for (S)‐ 3b . These dendronized conjugated polymers exhibited good thermal stability. The glass‐transition temperatures and the initial decomposition temperatures were 187.5 and 265.3 °C for (S)‐ 3a and 173.8 and 308.9 °C for (S)‐ 3b , respectively. (S)‐ 3a and (S)‐ 3b had high fluorescence quantum efficiencies, 87 and 91%, respectively, in tetrahydrofuran. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1167–1172, 2002     

Synthesis and helical properties of N‐substituted p‐benzamide random copolymers possessing chiral/achiral and (S)/(R) side chains

Random copolymers of poly(p‐benzamide)s having a methyl‐substituted tri(ethylene glycol) unit as a chiral side chain and a nonsubstituted tri(ethylene glycol) or branching alkyl unit as an achiral side chain were synthesized by copolymerization of N‐substituted 4‐aminobenzoic acid ester monomers with a base in the presence of an initiator. Copolymerizations of the chiral (S)‐monomer with N‐tri(ethylene glycol) achiral monomer and with the racemic monomer were carried out by the addition of a mixture of two monomers and an initiator to a solution of a base all at once, affording the corresponding random copolymers. On the other hand, random copolymerization of the chiral monomer with monomer having an achiral branching alkyl side chain required dropwise addition of the achiral monomer to a mixture of the chiral monomer, the initiator, and the base. These copolymers formed helical structures, but analysis of the CD spectra indicated the absence of cooperativity between the monomer units along the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rheological behavior and microstructure of 2,2′‐dioxy‐ 1,1′‐binaphthylphosphazene R/S random copolymer

Solutions of a binaphthoxy phosphazene copolymer (containing chiral 2,2′‐dioxy‐1,1′‐binaphthyl units with 50% R and S configurations distributed along the chains) in N‐methyl pyrrolidone were studied by means of continuous flow experiments and small amplitude oscillatory flow tests. A sudden viscosity decrease was observed in the polymer concentration range (39–40 wt %), evidencing a liquid‐crystalline polymer behavior. This has been confirmed by other rheological methods which have demonstrated that, for a sufficiently high concentration, the solutions of the binaphthoxy phosphazene copolymer give rise to a lyotropic system with formation of rigid rods (axial ratio of 10) stacked parallel to each other. The lyotropic properties of our binaphthoxy phosphazene copolymer are compatible with a regular helical structure, similar to that found for a homoleptic binaphthoxy phosphazene, which contains only S configuration. This suggests that the chains of 50% R/S binaphthoxy phosphazene copolymer are, in average, close to the strictly alternating R‐S copolymeric structure of the syndiotactic isomer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Synthesis and characterization of chiral polymer complexes incorporating polybinaphthyls,bipyridine, and Eu(III)

Chiral conjugated polymers P‐1 and P‐2 were synthesized by the polymerization of (S)‐3,3′‐diiodo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl and (S)‐6,6′‐dibromo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl, respectively, with 5,5′‐divinyl‐2,2′‐bipyridine through a Heck cross‐coupling reaction. Chiral polymer complexes P‐C‐1 and P‐C‐2 were obtained by the bipyridine chelating coordination of P‐1 and P‐2 with Eu(TTA)₃·2H₂O (where TTA is 2‐thenoyltrifluoroacetonate). Polymers P‐1 and P‐2 and polymer complexes P‐C‐1 and P‐C‐2 exhibited intense circular dichroism signals, with negative and positive Cotton effects in their circular dichroism spectra. The chiral polymers showed strong green‐blue fluorescence because of the efficient energy migration from the extended π‐electronic structure of the conjugated polymer main to the chiral binaphthyl core. The chiral polymer complexes could have not only polymer fluorescence but also the characteristic fluorescence of Eu(III) (⁵D₀→⁷F₂) at a different excited wavelength. These kinds of chiral polymer complexes incorporating polybinaphthyls, bipyridine, and Eu(III) moieties are expected to provide an understanding of the relationship between the structure and properties of chiral polymer complexes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 650–660, 2007     

High‐quality poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] synthesized by a solid–liquid two‐phase reaction: Characterizations and electroluminescence properties

Poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] (MEH‐PPV) with a molar mass of 26–47 × 10⁴ g mol^?1 and a polydispersity of 2.5–3.2 was synthesized by a liquid–solid two‐phase reaction. The liquid phase was tetrahydrofuran (THF) containing 1,4‐bis(chloromethyl)‐2‐methoxy‐5‐(2′‐ethylhexyloxy)benzene as the monomer and a certain amount of tetrabutylammonium bromide as a phase‐transfer catalyst. The solid phase consisted of potassium hydroxide particles with diameters smaller than 0.5 mm. The reaction was carried out at a low temperature of 0 °C and under nitrogen protection. No gelation was observed during the polymerization process, and the polymer was soluble in the usual organic solvents, such as chloroform, toluene, THF, and xylene. A polymer light‐emitting diode was fabricated with MEH‐PPV as an active luminescent layer. The device had an indium tin oxide/poly(3,4‐ethylenedioxylthiophene) (PEDOT)/MEH‐PPV/Ba/Al configuration. It showed a turn‐on voltage of 3.3 V, a luminescence intensity at 6.1 V of 550 cd/m², a luminescence efficiency of 0.43 cd/A, and a quantum efficiency of 0.57%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3049–3054, 2004