Low-temperature heat capacities and thermodynamic properties of rare-earth triisothiocyanate hydrates (III) —Sm(NCS)3 · 6H2O, Gd(NCS)3 · 6H20, Yb(NCS)3 · 6H20 and Y(NCS)3 · 6H20

The heat capacities of four RE isothiocyanate hydrates, Sm(NCS)₃, · 6H₂0, Gd(NCS)₃ · 6H₂0, Yb(NCS)₃, · 6H₂O and Y(NCS)₃, · 6H₂0, have been measured from 13 to 300 K with a fully-automated adiabatic calorimeter. No obvious thermal anomaly was observed for the above-mentioned compounds in the experimental temperature ranges. The polynomial equations for calculating the heat capacities of the four compounds in the range of 13–300 K were obtained by the least-squares fitting based on the experimentalC _P, data. TheC _P, values below 13 K were estimated by using the Debye-Einstein heat capacity functions. The standard molar thermodynamic functions were calculated from 0 to 300 K. Gibbs energies of formation were also calculated. Project supported by the National Natural Science Foundation of China.     

Cadmium(II) diallyldithiocarbamato complexes with 2,2′-bipyridine and 1,10-phenanthroline: spectroscopic and crystal structure analysis

Complexes of Cd(II) with diallyldithiocarbamato (hereafter denoted aldtc) and 2,2′-bipyridine (bipy) and 1,10-phenanthroline (phen) are discussed. Derivatives of general formula [Cd(aldtc)₂(NN)] [NN = bipy, 1 and phen, 2] have been obtained by direct reaction between Cd(NO₃)₂ and a 2 : 1 molar ratio of aldtc and NN. The new complexes have been characterized by IR, ¹H, and ¹³C NMR spectroscopy. Their single crystal structures were also determined. Compounds 1 and 2 have severely distorted octahedral coordination around cadmium, defined by an N₂S₄ donor set. The structure of 1 is isomorphous with the recently reported zinc analogue. The crystal packing of 1 shows different non-classical intermolecular interactions represented in both hydrophilic (π)C–H ··· S and hydrophobic (allyl)C–H ··· C(π) intermolecular interactions. Such interactions result in a chain arrangement of molecules along the crystallographic c-axis. These chains are further connected via π ··· π stacking along with (π)C–H ··· S parallel to b leading to an overall crystal packing that can be regarded as layers of complexes along the bc plane. Molecules in the crystal structure of 2 are arranged into infinite chains, down the b-axis, that are connected by aryl ··· aryl stacking. The chains are further connected to each other in a and c directions via (allyl)C–H ··· S interactions.     

Lone pair···π interactions on the stabilization of intra and intermolecular arrangements of coordination compounds with 2-methyl imidazole and benzimidazole derivatives

Abstract

Spectroscopic and single crystal X-ray diffraction studies of coordination compounds of Co^II, Ni^II, Zn^II, and Pd^II with phenylsulfonyl imidazole and benzimidazole derivatives (2-mfsiz, 2-mfsbz) were performed. The relevance of non-covalent interactions on the stabilization of intra and intermolecular arrangements in the ligands and their coordination compounds was investigated. The imidazole 2-mfsiz ligand presents two enantiomeric conformers, where the ethylphenylsulfone moiety stabilizes intermolecular lone pair···π (S–O···π_(phe)) and H···π contacts, while its tetrahedral coordination compounds, [M(2-mfsiz)₂X₂] (M²⁺?=?Co, Ni, Zn; X?=?Cl, Br) showed intramolecular lone pair···π interactions (S–O···π_(iz)). On the other hand, compounds [Cu₂(2-mfsiz)₂(µ₂-AcO)₄] and trans-[Pd(2-mfsiz)₂Cl₂] do not present lone pair···π interactions due to the metal ion geometry (square base pyramidal or square planar), which leads to formation of π_(iz)···π_(phe) interactions. For the benzimidazole ligand 2-mfsbz, an intramolecular, H_(phe)···π_(bz) contact was observed, remaining in its tetrahedral and octahedral coordination compounds, [M(2-mfsbz)₂X₂] (M²⁺?=?Co, Zn; X?=?Cl, Br, NO₃). This interaction limits the free rotation of the ethylphenylsulfone moiety for stabilization of an intermolecular lone pair···π interaction (S–O···π_(iz)). The dimeric [Zn₂(2-mfsiz)₂(µ²-AcO)₄] compound has a π_(bz)···π_(phe) contact. Theoretical calculations confirmed the non-covalent interactions in the ligands and their coordination compounds.     

Highly Efficient and Selective Deprotection Method for Prenyl,Geranyl, and Phytyl Ethers and Esters Using Borontrifluoride–Etherate

An efficient, simple, and practical method has been developed for the deprotection of prenyl, geranyl, and phytyl ethers and esters of aromatic and aliphatic compounds using borontrifluoride–etherate (BF₃ · OEt₂) at room temperature in good to excellent yields for the first time.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Synthesis of high surface area nanometer magnesia by solid-state chemical reaction

Nanometer MgO samples with high surface area, small crystal size and mesoporous texture were synthesized by thermal decomposition of MgC₂O₄ · 2H₂O prepared from solid-state chemical reaction between H₂C₂O₄ · 2H₂O and Mg (CH₃COO)₂ · 4H₂O. Steam produced during the decomposition process accelerated the sintering of MgO, and MgO with surface area as high as 412 m² · g⁻¹ was obtained through calcining its precursor in flowing dry nitrogen at 520°C for 4 h. The samples were characterized by X-ray diffraction, N₂ adsorption, transmission electron microscopy, thermogravimetry, and differential thermal analysis. The as-prepared MgO was composed of nanocrystals with a size of about 4–5 nm and formed a wormhole-like porous structure. The MgO also had good thermal stability, and its surface areas remained at 357 and 153 m²·g⁻¹ after calcination at 600 and 800°C for 2 h, respectively. Compared with the MgO sample prepared by the precipitation method, MgO prepared by solid-state chemical reaction has uniform pore size distribution, surface area, and crystal size. The solid-state chemical method has the advantages of low cost, low pollution, and high yield, therefore it appears to be a promising method in the industrial manufacture of nanometer MgO. Translated from Chinese Journal of Catalysis, 2006, 27(9): 793–798 (in Chinese)     

Modified One‐Pot Protocol for the Preparation of Thioglycosides from Unprotected Aldoses via S‐Glycosyl Isothiouronium Salts*

An efficient one‐pot protocol for the direct preparation of thioglycosides starting from unprotected reducing sugars via S‐glycosyl isothiouronium salts is reported. In this one‐pot methodology, BF₃ · OEt₂ has been used as a general catalyst for both per‐O‐acetylation of sugars and conversion of sugar per‐O‐acetates into S‐glycosyl isothiouronium salts, which was allowed to react with alkylating agents in the presence of a base to furnish thioglycosides in excellent yield.     

ZrOCl2•8H2O-Catalyzed One-Pot Multicomponent Synthesis of β′-Acetamido-β-dicarbonyl Compounds with Special Reference to pref-Selective β′-Acetamido-β-ketoesters

ZrOCl₂ · 8H₂O catalyzes the one-pot synthesis of β′-acetamido-β-dicarbonyl compounds in high yields from aldehyde, enolizable β-dicarbonyl compound, acetyl chloride, and acetonitrile in solvent as well as in solvent-free conditions. β′-Acetamido-β-ketoesters are formed in moderate to exclusive pref-diastereoselectivity.     

A spiral-like chain from a hydrogen-bonded cyclic dichloride containing a water dimer in a quaternary diammonium dichloride trihydrate

The reaction of benzyl chloride with tetramethylethylenediamine (tmen) results in the formation of the quaternary diammonium dichloride trihydrate (dbtmen)Cl₂·3H₂O 1 (dbtmen is N,N′-dibenzyl-N,N,N′,N′-tetramethylethylenediammonium) in good yields. 1 crystallises in the monoclinic P2₁/c space group and its structure consists of N,N′-dibenzyl-N,N,N′,N′-tetramethylethylenediammonium dication, two chloride anions and three crystal water molecules all of which are located in general positions. The organic dication is H-bonded to the chloride anions and the crystal waters with the help of intra-and intermolecular C-H···Cl and C-H···O interactions, while the chloride anions are linked to the crystal waters via O-H···Cl interactions. One of the crystal waters is linked through an intermolecular O-H···O bond with another water resulting in the formation of a water dimer. The O-H···Cl and O-H···O interactions between the chloride anions and water molecules lead to the formation of a five-membered {O₃Cl₂} cyclic dichloride containing a water dimer. The five-membered rings are linked into a chain with the aid of a O-H···Cl interaction. The organic cations are organised in zigzag fashion on either side of the chain and are further linked to the anionic water chain via weak C-H···O and C-H···Cl interactions, leading to the supramolecular organisation of the rings into a spiral-like of chain. Dedicated to Prof. Sabyasachi Sarkar on the occasion of his 60^th birthday     

Interconversion of copper(II) to copper(I): synthesis,characterization of copper(II) and copper(I) 2,2′-biquinoline complexes and their microbiological activity

The complexes [Cu(biq)₂]Cl₂ and [Cu(biq)₂]BF₄·biq (biq?=?2,2′-biquinoline) have been prepared and characterized. The interconversion to copper(I) complex [Cu(biq)₂]BF₄·biq, from [Cu(biq)₂]Cl₂ has been established. The new complexes have been characterized by elemental analysis, conductivity and magnetic measurements, IR, UV-vis and ¹H- and ¹³C-NMR spectroscopy. The X-ray analysis of the complex [Cu(biq)₂]BF₄·biq supports the assumption of the interconversion of copper(II) to copper(I) in this case. The crystal structure shows that geometry around the metal is severely distorted from T_d, and displays many supramolecular motifs incorporating both hydrophobic (aryl···aryl) and hydrophilic (C–H···F) intermolecular interactions. The microbiological activity of the complexes against bacteria and fungi was found to be high against Candida albicans, and slight to moderate against bacteria. The antimicrobial activity of [Cu(biq)₂]BF₄·biq was slightly better than that observed for [Cu(biq)₂]Cl₂ against both bacteria and fungi.     

Silica‐Supported Sodium Hydrogen Sulfate Catalyzed Facile Transformation of p‐Hydroxybenzyl Alcohols to p‐Hydroxybenzyl Ethers and Thioethers

Abstract

The heterogeneous catalyst, silica‐supported sodium hydrogen sulfate (NaHSO₄ · SiO₂) has been found to be highly efficient in carrying out the transformation of p‐hydroxybenzyl alcohols at room temperature to p‐hydroxybenzyl ethers and thioethers in very high yields.