Pseudo Jahn-Teller origin of nonplanarity and rectangular-ring structure of tetrafluorocyclobutadiene

It is shown that the pseudo Jahn-Teller effect (PJTE) in combination with ab initio calculations explains the origin of instability of the planar configuration of tetrafluorocyclobutadiene, C(4)F(4), with respect to a puckered structure and square-to-rectangle distortion of the carbon ring, and rationalizes its difference from the planar-rectangular geometry of C(4)H(4) and nonplanar (puckered) structure of Si(4)H(4). The two types of instability and distortion of the high-symmetry D(4h) configuration in these systems emerge from the PJT coupling of the ground B(2g) state with the excited A(1g) term producing instability along the b(2g) coordinate (elongation of the carbon or silicon square ring), and with the excited E(g) term resulting in e(g) (puckering) distortion. A rhombic distortion b(1g) of the ring is also possible due to the coupling between excited A(1g) and B(1g) terms. For C(4)F(4), ab initio calculations of the energy profiles allowed us to evaluate the PJTE constants and to show that the two instabilities, square-to-tetragonal b(2g) and puckering e(g) coexist, thus explaining the origin of the observed geometry of this system in the ground state. The preferred cis-trans (e(g) type) puckering in C(4)F(4) versus trans-trans puckering (b(2u) distortion) in Si(4)H(4) follows from the differences in the energy gaps to their excited electronic E(g) and A(1u) terms causing different PJTE in these two cases.     

Conversion of the aggregation state of merocyanine dye, modification of the subcell packing of arachidic acid, and removal of the majority of n-octadecane by hydrothermal treatment in the liquid phase in a mixed Langmuir-Blodgett film of the ternary system

We have investigated the influence of heat treatment in an air atmosphere (HT) and hydrothermal treatment in the liquid phase (HTTL) on the H-aggregate in a mixed Langmuir-Blodgett (LB) film of merocyanine dye with an octadecyl group (MS(18))-arachidic acid (C(20))-n-octadecane (AL(18)) ternary system by means of polarized visible and IR absorption spectroscopy. HT causes the variation from the H-aggregate to the monomer, the increment in the number of gauche conformers in the MS(18) hydrocarbon chain, the slight orientation change in the C(20) hydrocarbon chain, and the complete evaporation of AL(18). The dissociation of MS(18) is probably ascribed to the complete evaporation of AL(18) from the mixed LB film and the increase in thermal mobility of the long axis of the MS(18) hydrocarbon chain during HT. However, HTTL can easily and rapidly induce the conversion of the MS(18) aggregation state from H- to J-aggregates, the modification of the C(20) subcell packing from hexagonal to orthorhombic, and the removal of most of the AL(18) molecules. The conversion of the MS(18) aggregation state can be interpreted to consist of two processes from the H-aggregate to the monomer and from the monomer to the J-aggregate. In the initial stage of HTTL, the MS(18) aggregation state changes from the H-aggregate to the monomer, which is caused by the removal of almost all of the AL(18) molecules from the mixed LB film to warm water via the thermal energy of warm water. Then, the large relative permittivity of warm water is expected to relate strongly to the subsequent variation from the monomer to the J-aggregate. This transformation results in the decrease in the total value of the electrostatic energy based on the MS(18) permanent dipole interaction. Moreover, the modification of the C(20) subcell packing is possibly due to the hydrophobic effect, where the C(20) hydrocarbon chains cohere again in the warm water during HTTL. Consequently, it has been found that HTTL is quite effective to reorganize the chromophore alignment of MS(18), to modify the subcell packing of C(20) and to erase the majority of AL(18) molecules in the mixed LB film of the MS(18)-C(20)-AL(18) ternary system in a short time.     

Near-infrared spectroscopy of LiNH3: first observation of the electronic spectrum

Electronic spectra of LiNH(3) and its partially and fully deuterated analogues are reported for the first time. The spectra have been recorded in the near-infrared and are consistent with two electronic transitions in close proximity, the ?(2)E-X(2)A(1) and B(2)A(1)-X(2)A(1) systems. Vibrational structure is seen in both systems, with the Li-N-H bending vibration (ν(6)) dominant in the ?(2)E-X(2)A(1) system and the Li-N stretch (ν(3)) in the B(2)A(1)-X(2)A(1) system. The prominence of the 6(0)(1) band in the ?(2)E-X(2)A(1) spectrum is attributed to Herzberg-Teller coupling. The proximity of the B(2)A(1) state, which lies a little more than 200 cm(-1) above the ?(2)E state, is likely to be the primary contributor to this strong vibronic coupling.     

Asymmetric synthesis of aziridines by reduction of N-tert-butanesulfinyl alpha-chloro imines

Reduction of (RS)-N-tert-butanesulfinyl alpha-halo imines afforded chiral aziridines in good to excellent yields. Upon reduction of (RS)-N-tert-butanesulfinyl alpha-halo imines with NaBH4 in THF, in the presence of 10 equiv of MeOH, (RS,S)-beta-halo sulfinamides were formed in excellent yield (up to 98%) with very good stereoselectivity (>98:2). Simple treatment of the latter (RS,S)-beta-halo-tert-butanesulfinamides with KOH afforded the corresponding (RS,S)-N-(tert-butylsulfinyl)aziridines in quantitative yields. On the contrary, its epimer, (RS,R)-N-(tert-butylsulfinyl)aziridine was synthesized by switchover of the reducing agent from NaBH4 to LiBHEt3. (RS,R)-N-(tert-Butylsulfinyl)aziridines were synthesized in good yields (up to 85%) and diastereoselectivity (up to 92:8) by reduction of (RS)-N-tert-butanesulfinyl alpha-halo imines with LiBHEt3 in dry THF and subsequent treatment with KOH. All chiral aziridines were obtained as a single diastereomer after recrystallization (overall yield up to 91%) or after flash chromatography.     

pH controls the rate and mechanism of nitrosylation of water-soluble FeIII porphyrin complexes

In-depth kinetic and mechanistic studies on the reversible binding of NO to water-soluble iron(III) porphyrins as a function of pH revealed unexpected reaction kinetics for monohydroxo-ligated (P)Fe(III)(OH) species formed by deprotonation of coordinated water in diaqua-ligated (P)Fe(III)(H(2)O)(2). The observed significant decrease in the rate of NO binding to (P)Fe(OH) as compared to that of (P)Fe(H(2)O)(2) does not conform with expectations based on previous mechanistic work on NO-heme interactions, which would point to a diffusion-limited reaction for the five-coordinate Fe(III) center in (P)Fe(OH). The decrease in rate and an associatively activated mode of NO binding observed at high pH is ascribed to an increase in the activation barrier related to spin state and structural changes accompanying NO coordination to the high-spin (P)Fe(III)(OH) complex. The existence of such a barrier has previously been observed in the reactions of five-coordinate iron(II) hemes with CO and is evidenced for the first time for the process involving coordination of NO to the iron heme complex. The observed reactivity pattern, relevant in the context of studies on NO interactions with synthetic and biologically important hemes (in particular, hemoproteins), is reported here for an example of a simple water-soluble iron(III) porphyrin [meso-tetrakis(sulfonatomesityl)porphinato]-iron(III), (TMPS)Fe(III).     

Rhenium oxo complexes of a chelating diyne ligand. Synthesis and study of the kinetics of protonation

A series of oxo complexes, Re(O)X(diyne) (X = I, Me, Et), have been prepared from 2,7-nonadiyne and Re(O)I(3)(PPh(3))(2). Addition of B(C(6)F(5))(3) to Re(O)I(2,7-nonadiyne) (5) results in coordination of the oxo ligand to the boron. The protonation of Re(O)(X)(2-butyne)(2) and Re(O)(X)(2,7-nonadiyne)(2) with a variety of acids has been examined. With 5 and HBF(4)/Et(2)O, the ultimate product was [Re(CH(3)CN)(3)(I)(2,7-nonadiyne)](2+) (7). The conversion of 5 to 7 changes the conformation of the diyne ligand from a "chair" to a "boat" and shifts its propargylic protons considerably downfield in the (1)H NMR. The kinetics of the protonation of Re(O)I(2,7-nonadiyne) (5) by CF(3)SO(3)H in CH(3)CN have been monitored by visible spectroscopy, in a stopped-flow apparatus, and by low temperature (1)H NMR. Two second-order rate constants, presumably successive protonations, were observed in the stopped-flow, k(1) = 11.9 M(-)(1) s(-)(1) and k(2) = 3.8 M(-)(1) s(-)(1). Low temperature (1)H NMR spectroscopy indicated that the resulting solution contained a mixture of two doubly protonated intermediates X and Y, each of which slowly formed the product 7 via an acid-independent process.     

Mechanism of the

Stereochemical studies on [2 + 2] photoaddition of cis-/trans-4-propenylanisole (cis-1 and trans-1) and cis-1-(p-methoxyphenyl)ethylene-2-d(1) (cis-3-d(1)) to C(60) exhibit stereospecificity in favor of the trans-2 cycloadduct in the former case and nonstereoselectivity in the latter. The observed stereoselectivity in favor of the cis-6-d(3) [2 + 2] diastereomer by 12% in the case of the photochemical addition of (E)-1-(p-methoxyphenyl)-2-methyl-prop-1-ene-3,3,3-d(3) (trans-5-d(3)) to C(60) is attributed to a steric kinetic isotope effect (k(H)/k(D) = 0.78). The loss of stereochemistry in the cyclobutane ring excludes a concerted addition and is consistent with a stepwise mechanism. Intermolecular secondary kinetic isotope effects of the [2 + 2] photocycloaddition of 3-d(0) vs 3-d(1), and 3-d(6) as well as 5-d(0) vs 5-d(1), and 5-d(6) to C(60) were also measured. The intermolecular competition due to deuterium substitution of both vinylic hydrogens at the beta-carbon of 3 exhibits a substantial inverse alpha-secondary isotope effect k(H)/k(D) = 0.83 (per deuterium). Substitution with deuterium at both vinylic methyl groups of 5 yields a small inverse k(H)/k(D) = 0. 94. These results are consistent with the formation of an open intermediate in the rate-determining step.     

Synthesis of monomeric Fe(II) and Ru(II) complexes of tetradentate phosphines

rac-Bis[{(diphenylphosphino)ethyl}-phenylphosphino]methane (DPPEPM) reacts with iron(II) and ruthenium(II) halides to generate complexes with folded DPPEPM coordination. The paramagnetic, five-coordinate Fe(DPPEPM)Cl(2) (1) in CD(2)Cl(2) features a tridentate binding mode as established by (31)P{(1)H} NMR spectroscopy. Crystal structure analysis of the analogous bromo complex, Fe(DPPEPM)Br(2) (2) revealed a pseudo-octahedral, cis-α geometry at iron with DPPEPM coordinated in a tetradentate fashion. However, in CD(2)Cl(2) solution, the coordination of DPPEPM in 2 is similar to that of 1 in that one of the external phosphorus atoms is dissociated resulting in a mixture of three tridentate complexes. The chloro ruthenium complex cis-Ru(κ(4)-DPPEPM)Cl(2) (3) is obtained from rac-DPPEPM and either [RuCl(2)(COD)](2) [COD = 1,5-cyclooctadiene] or RuCl(2)(PPh(3))(4). The structure of 3 in both the solid state and in CD(2)Cl(2) solution features a folded κ(4)-DPPEPM. This binding mode was also observed in cis-[Fe(κ(4)-DPPEPM)(CH(3)CN)(2)](CF(3)SO(3))(2) (4). Addition of an excess of CO to a methanolic solution of 1 results in the replacement of one of the chloride ions by CO to yield cis-[Fe(κ(4)-DPPEPM)Cl(CO)](Cl) (5). The same reaction in CH(2)Cl(2) produces a mixture of 5 and [Fe(κ(3)-DPPEPM)Cl(2)(CO)] (6) in which one of the internal phosphines has been substituted by CO. Complexes 2, 3, 4, and 5 appear to be the first structurally characterized monometallic complexes of κ(4)-DPPEPM.     

Direct determination of the Gibbs' energy of formation of peroxynitrous acid

The kinetics of decomposition of peroxynitrous acid (ONOOH) was investigated in the presence of 0.1-0.75 M HClO(4) and at a constant ionic strength. The decay rate of ONOOH decreased in the presence of H(2)O(2), approaching a limiting value well below 75 mM H(2)O(2). It also decreased in the presence of relatively low [HNO(2)] but did not approach a lower limiting value, since ONOOH reacts directly with HNO(2). The latter reaction corresponds to a HNO(2)- and H(+)-catalyzed isomerization of ONOOH to nitrate, and its third-order rate constant was determined to be 520 +/- 30 M(-)(2) s(-)(1). The mechanism of formation of O(2)NOOH from ONOOH in the presence of H(2)O(2) was also scrutinized. The results demonstrated that in the presence of 0.1-0.75 M HClO(4) and 75 mM H(2)O(2) the formation of O(2)NOOH is insignificant. The most important finding in this work is the reversibility of the reaction ONOOH + H(2)O right harpoon over left harpoon HNO(2) + H(2)O(2), and its equilibrium constant was determined to be (7.5 +/- 0.4) x 10(-)(4) M. Using this value, the Gibbs' energy of formation of ONOOH was calculated to be 7.1 +/- 0.2 kcal/mol. This figure is in good agreement with the value determined previously from kinetic data using parameters for radicals formed during homolysis of peroxynitrite.     

Imaging studies of the photodissociation of H2S+ cations. I. Illustrations of the role of nuclear spin

Ion imaging methods have been used to study the dynamics of H(2)(D(2)) molecular elimination from H(2)S(+)(D(2)S(+)) cations following photoexcitation to the A(2)A(1) state in the wavelength range 300相似文献   

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

Photocatalytic reduction of nitrite to dinitrogen in aqueous suspensions of metal-loaded titanium(IV) oxide in the presence of a hole scavenger: an ensemble effect of silver and palladium co-catalysts

Nitrite (NO(2)(-)) was photocatalytically reduced to dinitrogen (N(2)) in an aqueous suspension of two kinds of titanium(iv) oxide particles loaded with palladium and silver (Pd-TiO(2) and Ag-TiO(2)) at pH 8 under irradiation of UV light in the presence of sodium oxalate as a hole scavenger. The two metal-loaded TiO(2) photocatalysts had different roles in conversion of NO(2)(-) to N(2) and worked in an effective ensemble without conflict: (1) Pd-TiO(2) induced photocatalytic disproportionation of NO(2)(-) to N(2) and nitrate (NO(3)(-)) and (2) Ag-TiO(2) selectively reduced the thus-formed NO(3)(-) back to NO(2)(-) (partially to N(2)) with oxalate acting as a hole scavenger. When Pd-TiO(2) was used alone for NO(3)(-) reduction in the presence of sodium oxalate, Pd-TiO(2) induced fruitless photocatalytic decomposition of oxalate to carbon dioxide and dihydrogen. The presence of Ag-TiO(2) suppressed the fruitless decomposition of oxalate by Pd-TiO(2) because Ag-TiO(2) continuously provided NO(2)(-) in the reaction system using oxalate as a hole scavenger and Pd-TiO(2) therefore only worked as a photocatalyst for disproportionation of NO(2)(-) to N(2) and NO(3)(-) as it did when used alone.     

Effects of bulk impurity concentration on the reactivity of metal surface: sticking of hydrogen molecules and atoms to polycrystalline Nb containing oxygen

Nonmetallic impurities segregated onto metal surfaces are able to drastically decrease the chemical reactivity of metals. In the present paper, effects of bulk impurities on the reactivity of metallic surfaces were investigated in a wide temperature range on an example of the sticking of hydrogen molecules and atoms to Nb [polycrystalline, with mainly (100)] containing solute oxygen. At all the investigated surface temperatures, T(S) (300-1400 K), we found the bulk oxygen concentration C(O) to have a strong effect on the integral probability, alpha(H(2) ), of dissociative sticking of H(2) molecules followed by hydrogen solution in the metal lattice: alpha(H(2) ) monotonically decreased by orders of magnitude with increasing C(O) from 0.03 to 1.5 at. %. The sticking coefficient alpha(H(2) ) was found to depend on T(S) but not on the gas temperature. The effect of C(O) on alpha(H(2) ) is explained by the presence of oxygen-free sites (holes in coverage) serving as active centers of the surface reaction in the oxygen monolayer upon Nb. In contrast to H(2) molecules, H atoms were found to stick to, and be dissolved in, oxygen-covered Nb with a probability comparable to 1, depending neither on C(O) nor on T(S). This proves that, unlike H(2) molecules, H atoms do stick to be dissolved mainly through regular surface sites covered by oxygen and not through the holes in coverage.     

Enhanced reducibility of Ce1-xTixO2 compared to that of CeO2 and higher redox catalytic activity of Ce1-x-yTixPtyO2-delta compared to that of Ce1-xPtxO2-delta

Nanocrystalline Ce(1)(-)(x)Ti(x)O(2) (0 < or = x < or = 0.4) and Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2)(-)(delta) (x = 0.15, y = 0.01, 0.02) solid solutions crystallizing in fluorite structure have been prepared by a single step solution combustion method. Temperature programmed reduction and XPS study of Ce(1)(-)(x)Ti(x)O(2) (x = 0.0-04) show complete reduction of Ti(4+) to Ti(3+) and reduction of approximately 20% Ce(4+) to Ce(3+) state compared to 8% Ce(4+) to Ce(3+) in the case of pure CeO(2) below 675 degrees C. The substitution of Ti ions in CeO(2) enhances the reducibility of CeO(2). Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) crystallizes in fluorite structure and Pt is ionically substituted with 2+ and 4+ oxidation states. The H/Pt atomic ratio at 30 degrees C over Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) is 5 and that over Ce(0.99)Pt(0.01)O(2)(-)(delta) is 4 against just 0.078 for 8 nm Pt metal particles. Carbon monoxide and hydrocarbon oxidation activity are much higher over Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2) (x = 0.15, y = 0.01, 0.02) compared to Ce(1)(-)(x)Pt(x)O(2) (x = 0.01, 0.02). Synergistic involvement of Pt(2+)/Pt degrees and Ti(4+)/Ti(3+) redox couples in addition to Ce(4+)/Ce(3+) due to the overlap of Pt(5d), Ti(3d), and Ce(4f) bands near E(F) is shown to be responsible for improved redox property and higher catalytic activity.     

The aromaticity of pyracylene: an experimental and computational study of the energetics of the hydrogenation of acenaphthylene and pyracylene

In this work, the aromaticity of pyracylene (2) was investigated from an energetic point of view. The standard enthalpy of hydrogenation of acenaphthylene (1) to acenaphthene (3) at 298.15 K was determined to be minus sign(114.5 +/- 4.2) kJ x mol(-1) in toluene solution and minus sign(107.9 +/- 4.2) kJ x mol(-1) in the gas phase, by combining results of combustion and reaction-solution calorimetry. A direct calorimetric measurement of the standard enthalpy of hydrogenation of pyracylene (2) to pyracene (4) in toluene at 298.15 K gave -(249.9 plus minus 4.6) kJ x mol(-1). The corresponding enthalpy of hydrogenation in the gas phase, computed from the Delta(f)H(o)m(cr) and DeltaH(o)m(sub) values obtained in this work for 2 and 4, was -(236.0 +/- 7.0) kJ x mol(-1). Molecular mechanics calculations (MM3) led to Delta(hyd)H(o)m(1,g) = -110.9 kJ x mol(-1) and Delta(hyd)H(o)m(2,g) = -249.3 kJ x mol(-1) at 298.15 K. Density functional theory calculations [B3LYP/6-311+G(3d,2p)//B3LYP/6-31G(d)] provided Delta(hyd)H(o)m(2,g) = -(244.6 +/- 8.9) kJ x mol(-1) at 298.15 K. The results are put in perspective with discussions concerning the "aromaticity" of pyracylene. It is concluded that, on energetic grounds, pyracylene is a borderline case in terms of aromaticity/antiaromaticity character.     

Modulation of the pK(a) of metal-bound water via oxidation of thiolato sulfur in model complexes of Co(III) containing nitrile hydratase: insight into possible effect of cysteine oxidation in Co-nitrile hydratase

The Co(III) complexes of N,N'-bis(2-mercaptophenyl)pyridine-2,6-dicarboxamide (PyPSH(4)), a designed pentadentate ligand with built-in carboxamide and thiolate groups, have been synthesized and studied to gain insight into the role of Cys-S oxidation in Co-containing nitrile hydratase (Co-NHase). Reaction of [Co(NH(3))(5)Cl]Cl(2) with PyPS(4)(-) in DMF affords the thiolato-bridged dimeric Co(III) complex (Et(4)N)(2)[Co(2)(PyPS)(2)] (1). Although the bridged structure is quite robust, reaction of (Et(4)N)(CN) with 1 in acetonitrile affords the monomeric species (Et(4)N)(2)[Co(PyPS)(CN)] (2). Oxidation of 2 with H(2)O(2) in acetonitrile gives rise to a mixture which, upon chromatographic purification, yields K(2)[Co(PyPSO(2)(OSO(2))(CN] (3), a species containing asymmetrically oxidized thiolates. The Co(III) metal center in 3 is coordinated to a S-bound sulfinate and an O-bound sulfonate (OSO(2)) group. Upon oxidation with H(2)O(2), 1 affords an asymmetrically oxidized dimer (Et(4)N)(2)[Co(2)(PyPS(SO(2)))(2)] (4) in which only the terminal thiolates are oxidized to form S-bound sulfinate groups while the bridging thiolates remain unchanged. The thiolato-bridge in 4 is also cleaved upon reaction with (Et(4)N)(CN) in acetonitrile, and one obtains (Et(4)N)(2)[Co(PyPS(SO(2)))(CN)] (5), a species that contains both coordinated thiolate and S-bound sulfinate around Co(III). The structures of 1-4 have been determined. The spectroscopic properties and reactivity of all the complexes have been studied to understand the behavior of the Co(III) site in Co-NHase. Unlike typical Co(III) complexes with bound CN(-) ligands, the Co(III) centers in 2 and 5 are labile and rapidly lose CN(-) in aqueous solutions. Since 3 does not show this lability, it appears that at least one thiolato sulfur donor is required in the first coordination sphere for the Co(III) center in such species to exhibit lability. Both 2 and 5 are converted to the aqua complexes [Co(PyPS)(H(2)O)](-) and [Co(PyPS(SO(2))(H(2)O)](-) in aqueous solutions. The pK(a) values of the bound water in these two species, determined by spectrophotometry, are 8.3 +/- 0.03 and 7.2 +/- 0.06, respectively. Oxidation of the thiolato sulfur (to sulfinate) therefore increases the acidity of the bound water. Since 2 and 5 promote hydrolysis of acetonitrile at pH values above their corresponding pK(a) values, it is also evident that a metal-bound hydroxide is a key player in the mechanism of hydrolysis by these model complexes of Co-NHase. The required presence of a Cys-sulfinic residue and one water molecule at the Co(III) site of Co-NHase as well as the optimal pH of the enzyme near 7 suggests that (i) modulation of the pK(a) of the bound water molecule at the active site of the enzyme could be one role of the oxidized Cys-S residue(s) and (ii) a cobalt-bound hydroxide could be responsible for the hydrolysis of nitriles by Co-NHase.     

Vertical diffusion of water molecules near the surface of ice

We studied diffusion of water molecules in the direction perpendicular to the surface of an ice film. Amorphous ice films of H(2)O were deposited on Ru(0001) at temperature of 100-140 K for thickness of 1-5 bilayer (BL) in vacuum, and a fractional coverage of D(2)O was added onto the surface. Vertical migration of surface D(2)O molecules to the underlying H(2)O multilayer and the reverse migration of H(2)O resulted in change of their surface concentrations. Temporal variation of the H(2)O and D(2)O surface concentrations was monitored by the technique of Cs(+) reactive ion scattering to reveal kinetics of the vertical diffusion in depth resolution of 1 BL. The first-order rate coefficient for the migration of surface water molecules ranged from k(1)=5.7(+/-0.6) x 10(-4) s(-1) at T=100 K to k(1)=6.7(+/-2.0) x 10(-2) s(-1) at 140 K, with an activation energy of 13.7+/-1.7 kJ mol(-1). The equivalent surface diffusion coefficients were D(s)=7 x 10(-19) cm(2) s(-1) at 100 K and D(s)=8 x 10(-17) cm(2) s(-1) at 140 K. The measured activation energy was close to interstitial migration energy (15 kJ mol(-1)) and was much lower than diffusion activation energy in bulk ice (52-70 kJ mol(-1)). The result suggested that water molecules diffused via the interstitial mechanism near the surface where defect concentrations were very high.     

Characterization of self-assembled monolayers of porphyrins bearing multiple thiol-derivatized rigid-rod tethers

A series of multithiol-functionalized zinc porphyrins has been prepared and characterized as self-assembled monolayers (SAMs) on Au. The molecules, designated ZnPS(n) (n = 1-4), contain from one to four [(S-acetylthio)methyl]phenylethynylphenyl groups appended to the meso-position of the porphyrin; the other meso-substituents are phenyl groups. For the dithiol-functionalized molecules, both the cis- and the trans-appended structures were examined. The ZnPS(n) SAMs were investigated using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and various electrochemical methods. The studies reveal the following characteristics of the ZnPS(n) SAMs. (1) The ZnPS(n) molecules bind to the Au surface via a single thiol regardless of the number of thiol appendages that are available per molecular unit. (2) The porphyrins in the ZnPS(3) and ZnPS(4) SAMs bind to the surface in a more upright orientation than the porphyrins in the ZnPS(1), cis-ZnPS(2), and trans-ZnPS(2) SAMs. The porphyrins in the ZnPS(3) and ZnPS(4) SAMs are also more densely packed than those in the cis-ZnPS(2) and trans-ZnPS(2) SAMs. The packing density of the ZnPS(3) and ZnPS(4) SAMs is similar to that of the ZnPS(1) SAMs, despite the larger size of the molecules in the former SAMs. (3) The thermodynamics and kinetics of electron transfer are generally similar for all of the ZnPS(n) SAMs. The general similarities in the electron-transfer characteristics for all of the SAMs are attributed to the similar binding motif.     

Stereoselectivity of methyl aryldiazoacetate cyclopropanations of 1,1-diarylethylene. Asymmetric synthesis of a cyclopropyl analogue of tamoxifen

[formula: see text] Dirhodium tetrakis(S-(N-dodecylbenzenesulfonyl)prolinate) (Rh2(S-DOSP)4)-catalyzed decomposition of methyl phenyldiazoacetate in the presence of 1,1-diarylethylenes results in intermolecular cyclopropanation with high enantioselectivity (up to 99% ee) and moderate diastereoselectivity (up to 80% de). The reaction was applied to the asymmetric synthesis of a cyclopropyl analogue of tamoxifen.     

Comparison of structure and reactivity of phosphine-amido and hemilabile phosphine-amine chelates of rhodium

A series of mono- and binuclear rhodium(I) complexes bearing ortho-phosphinoanilido and ortho-phosphinoaniline ligands has been synthesized. Reactions of the protic monophosphinoanilines, Ph(2)PAr or PhPAr(2) (Ar = o-C(6)H(4)NHMe), with 0.5 equiv of [Rh(μ-OMe)(COD)](2) result in the formation of the neutral amido complexes, [Rh(COD)(P,N-Ph(2)PAr(-))] or [Rh(COD)(P,N-PhP(Ar(-))Ar)] (Ar(-) = o-C(6)H(4)NMe(-)), respectively, through stoichiometrically controlled deprotonation of an amine by the internal methoxide ion. Similarly, the binuclear complex, [Rh(2)(COD)(2)(μ-P,N,P',N'-mapm(2-))] (mapm(2-) = Ar(Ar(-))PCH(2)P(Ar(-))Ar), can be prepared by reaction of the protic diphosphinoaniline, mapm (Ar(2)PCH(2)PAr(2)), with 1 equiv of [Rh(μ-OMe)(COD)](2). An analogous series of hemilabile phosphine-amine compounds can be generated by reactions of monophosphinoanilines, Ph(2)PAr' or PhPAr'(2) (Ar' = o-C(6)H(4)NMe(2)), with 1 equiv of [Rh(NBD)(2)][BF(4)] to generate [Rh(NBD)(P,N-Ph(2)PAr')][BF(4)] or [Rh(NBD)(P,N-PhPAr'(2))][BF(4)], respectively, or by reactions of diphosphinoanilines, mapm or dmapm (Ar'(2)PCH(2)PAr'(2)), with 2 equiv of the rhodium precursor to generate [Rh(2)(NBD)(2)(μ-P,N,P',N'-mapm)][BF(4)](2) or [Rh(2)(NBD)(2)(μ-P,N,P',N'-dmapm)][BF(4)](2), respectively. Displacement of the diolefin from [Rh(COD)(P,N-Ph(2)PAr(-))] by 1,2-bis(diphenylphosphino)ethane (dppe) yields [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] which, while unreactive to H(2), reacts readily and irreversibly with oxygen to form the peroxo complex, [RhO(2)(P,P'-dppe)(P,N-Ph(2)PAr(-))], and with iodomethane to yield [RhI(CH(3))(P,P'-dppe)(P,N-Ph(2)PAr(-))]. Hemilabile phosphine-amine compounds can also be prepared by reactions of [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] with Me(3)OBF(4) or HBF(4)·Et(2)O, resulting in (thermodynamic) additions at nitrogen to form [Rh(P,P'-dppe)(P,N-Ph(2)PAr')][BF(4)] or [Rh(P,P'-dppe)(P,N-Ph(2)PAr)][BF(4)], respectively. The nonlabile phosphine-amido and hemilabile phosphine-amine complexes were tested as catalysts for the silylation of styrene. The amido species do not require the use of solvents in reaction media, can be easily removed from product mixtures by protonation, and appear to be more active than their hemilabile, cationic congeners. Reactions catalyzed by either amido or amine complexes favor dehydrogenative silylation in the presence of excess olefin, showing modest selectivities for a single vinylsilane product. The binuclear complexes, which were prepared in an effort to explore possible catalytic enhancements of reactivity due to metal-metal cooperativity, are in fact somewhat less active than mononuclear species, discounting this possibility.