Spectrophotometric methods for determination of enalapril and timolol in bulk and in drug formulations

Two simple and accurate spectrophotometric methods for determination of timolol and enalapril maleate are described. The first method is based on chelate formation with palladium(II) chloride in buffered medium. The second method is based on the formation of the colored complex between palladium(II), eosin, and the two cited drugs using methylcellulose as surfactant to increase the solubility and intensity of the formed complexes. Under optimum conditions the complexes showed maximum absorption at 369.4 nm and 362.8 nm for timolol and enalapril maleate, respectively, in the first method and 552.2 and 550.6 nm for the second method. Apparent molar absorptivities were 1.8 x 10(3) and 1.3 x 10(3) and Sandell's sensitivities were 5.9 x 10(-4) and 2.7 x 10(-4) for timolol and enalapril maleate in the first method; in the second method molar absorptivities were 2.8 x 10(4) and 1.1 x 10(4) while Sandell's constants were 9.1 x 10(-3) and 2.3 x 10(-3) for timolol and enalapril maleate. The solutions of the complexes obeyed Beer's law in the concentration ranges 20-200 micro g mL(-1) and 50-300 micro g mL(-1) for timolol and enalapril maleate, respectively. In the second method, because the reaction was more sensitive the ranges were reduced to 1.6-16 micro g mL(-1) for timolol 8-56 micro g mL(-1) for enalapril maleate. The proposed methods were applied to the determination of the two drugs in their pharmaceutical formulation.     

Dynamics of electronic states and spin-flip for photodissociation of dihalogens in matrices: experiment and semiclassical surface-hopping and quantum model simulations for F2 and ClF in solid Ar

Three approaches are combined to study the electronic states' dynamics in the photodissociation of F(2) and ClF in solid argon. These include (a) semiclassical surface-hopping simulations of the nonadiabatic processes involved. These simulations are carried out for the F(2) molecule in a slab of 255 argon atoms with periodic boundary conditions at the ends. The full manifold of 36 electronic states relevant to the process is included. (b) The second approach involves quantum mechanical reduced-dimensionality models for the initial processes induced by a pump laser pulse, which involve wavepacket propagation for the preoriented ClF in the frozen argon lattice and incorporate the important electronic states. The focus is on the study of quantum coherence effects. (c) The final approach is femtosecond laser pump-probe experiments for ClF in Ar. The combined results for the different systems shed light on general properties of the nonadiabatic processes involved, including the singlet to triplet and intertriplet transition dynamics. The main findings are (1) that the system remains in the initially excited-state only for a very brief, subpicosecond, time period. Thereafter, most of the population is transferred by nonadiabatic transitions to other states, with different time constants depending on the systems. (2) Another finding is that the dynamics is selective with regard to the electronic quantum numbers, including the Lambda and Omega quantum numbers, and the spin of the states. (3) The semiclassical simulations show that prior to the first "collision" of the photodissociated F atom with an Ar atom, the argon atoms can be held frozen, without affecting the process. This justifies the rigid-lattice reduced-dimensionality quantum model for a brief initial time interval. (4) Finally, degeneracies between triplets and singlets are fairly localized, but intertriplet degeneracies and near degeneracies can span an extensive range. The importance of quantum effects in photochemistry of matrix-isolated molecules is discussed in light of the results.     

Three models for chain conformation of block copolymers in solution and in solid state

Solution properties of polystyrene-poly(methyl methacrylate) (PS-PMMA) diblock copolymer, polystyrene-poly(tertiobutyl methacrylate) (PS-PtBuMA) diblock copolymer, and poly(ethylene oxide)-polystyrene-poly(ethylene oxide) (PEO-PS-PEO) triblock copolymer have been measured by viscometry. The PEO-PS-PEO copolymer has been studied also in solid state by differential scanning calorimetry and by optical microscopy. All the block copolymers present a conformational transition in solution at a given temperature region which is relatively narrow. If below this transition temperature a copolymer adopts a segregated conformation (dumb-bell model), above this transition adopts a nonsegregated or pseudo-gaussian conformation, and vice versa. In the transition temperature region the copolymer adopts a compressed segregated conformation (core and shell model). If the passage from the solution to the solid state is performed in a given constant temperature in which the copolymer presents a segregated or nonsegregated conformation the same conformation is observed in the solid state (memory effect). © 1996 John Wiley & Sons, Inc.     

On Metabolic Degradations of Squalene,Lanosterol and Cholesterol in Rat Liver in vivo. Evidence for Recycling of Metabolites for the Synthesis of Isoprene Compounds

(1) Radioactivity of biosynthetically labeled squalene, injected in tracer amounts in rats is incorporated to about equal parts into cholesterol and component(s) of the fatty acid fraction of the liver. The ubiquinones isolated from the liver are radioactive and show about the same specific radioactivity as the cholesterol. It appears therefore, that the squalene which escapes incorporation into cholesterol is degraded to metabolite(s) suited for the synthesis of isoprene compounds. (2) Radioactivity of injected biosynthetically and chemically labeled cholesterol is traced in the ubiquinones and the squalene of rat liver indicating that a degradation of cholesterol and a recycling of the metabolite(s) occurs. (3) A recycling of metabolite(s) of squalene and of cholesterol can explain the observation that after labeled mevalonate or acetate as precursor, radioactivity can be traced in the squalene of the liver many hours after the injection and maintains a constant value during a period of several hours. (4) Radioactivity of biosynthetically labeled lanosterol is not only incorporated into cholesterol but a considerable part of it into component(s) of the bile acid fraction of the liver. Evidence is obtained that this transformation occurs by circumventing cholesterol as intermediate.     

Regioselectivity and equilibrium thermodynamics for addition of Rh-OH to olefins in water

Rhodium(III) tetra(p-sulfonato phenyl) porphyrin ((TSPP)Rh) aquo and hydroxo complexes react with a series of olefins in water to form beta-hydroxyalkyl complexes. Addition reactions of (TSPP)Rh-OH to unactivated terminal alkenes invariably occur with both kinetic and thermodynamic preferences to place rhodium on the terminal carbon to form (TSPP)Rh-CH(2)CH(OH)R complexes. Acrylic and styrenic olefins initially react to place rhodium on the terminal carbon to form Rh-CH(2)CH(OH)X as the kinetically preferred isomer but subsequently proceed to an equilibrium distribution of regioisomers where Rh-CH(CH(2)OH)X is the predominant thermodynamic product. Equilibrium constants for reactions of the diaquo rhodium(III) compound ([(TSPP)Rh(III)(H(2)O)(2)](-3)) in water with a series of terminal olefins that form beta-hydroxyalkyl complexes were directly evaluated and used in deriving thermodynamic values for addition of the Rh-OH unit to olefins. The DeltaG degrees for reactions of the Rh-OH unit with olefins in water is approximately 3 kcal mol(-1) less favorable than the comparable Rh-H reactions in water. Comparisons of the regioisomers and thermodynamics for addition reactions of olefins with Rh-H and Rh-OH units in water are presented and discussed.     

Simple and rapid methods for on-site determination of radon and thoron in soil-gases for seismic studies

The determination of soil-gas anomalies especially ²²²Rn anomalies, are important to precisely locate fault traces, as well as to investigate earthquake precursors. In this paper, we have studied and compared new rapid methods for on site determinations of radon (²²²Rn), thoron (²²⁰Rn) and total radon (²²²Rn+²²⁰Rn) in soil-gas. These new techniques pump the soil-gas continuously from the soil through a simple sampling tube to the counting cell for one-minute with discarding the excess. Then, either four one-minute counting periods (5-minute technique) or nine one-minute counting intervals (10-minute technique) are followed immediately. In all the methods, conversely to Morse"s method, the first counting period (C1) was not employed for calculations. Three calculation methods for the five-minute technique, two for the ten-minute technique and a modified Morse"s method are compared with theoretical values and different real soil-gases with different radon/thoron ratios. The affect of different flow rates of soil-gases into the counting cell was also investigated. Finally, the ten-minute technique seems to be a little more accurate, but the 5-minute technique is much more suitable for seismic field studies when a much larger number of determinations are required in a short time.     

Rapid method for the detection and quantification of N-nitrosodibutylamine in rubber products

A rapid method for the detection and quantification of N-nitrosodibutylamine (NDBA) migrating from rubber products into a neutral buffer solution is described. The extraction, clean up, and concentration is done by a one-step procedure using C18 cartridges. NDBA in the ppb range is identified and quantitated by gas chromatography (GC) with a thermal energy analyzer (TEA) as detector.     

A novel microreactor approach for analysis of ketones and aldehydes in breath

We report a fabricated microreactor with thousands of micropillars in channels. Each micropillar surface is chemically functionalized to selectively preconcentrate gaseous ketones and aldehydes of exhaled breath and to enhance ultra-trace, rapid analysis by direct-infusion Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometry (MS). The micropillar reactive coating contains the quaternary ammonium aminooxy salt 2-(aminooxy)ethyl-N,N,N-trimethylammonium iodide (ATM) for capturing trace carbonyl VOCs by means of an oximation reaction. We demonstrate the utility of this approach for detection of C(1) to C(12) aldehydes and ketones in exhaled breath, but the approach is applicable to any gaseous sample.     

Simple and robust approach for passivating and functionalizing surfaces for use in complex media

Pluronic is a popular triblock copolymer used as a surfactant to introduce hydrophilic coatings onto many different types of material surfaces, from engineering to biomedical applications. Unfortunately, this is limited in its ability to resist fouling from complex media (i.e., blood) and leaves the surface hard for further modification. Herein, we report a simple, yet robust approach for passivating and functionalizing surfaces based on zwitterionic poly(carboxybetaine) (PCB) based triblock copolymer, which can be directly applied to surfaces to prevent nonspecific protein adsorption from undiluted blood plasma, and to provide additional functionalities needed for the attachment of biomolecules. Several hydrophobic surfaces including polydimethylsiloxane, silanized silica, and self-assembled monolayers are tested to demonstrate its applicability to a wide range of systems. This approach provides a robust, convenient, and effective surface modification method for real-world applications from simple surface passivation to specific targeting in complex media.     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...     

Sensitive multi-residue method for detection of anabolics in urine and in tisssues of slaughtered animals

A routine procedure is described for the dependable detection of various anabolic residues in tissues or urine contaminated at levels as low as 0.5-10 ppb (10 parts per 10(9)). A suitable extraction and clean-up procedure was developed, permitting adequate recovery (60-80%) of various anabolics from tissue samples (50 g) or urine (50 ml). Following two-dimensional thin-layer chromatography, the presence of the anabolic residues are detected by sulphuric acid-induced fluorescence. The detection limit of most anabolics is of the order of 1-10 ng.     

Comparison of polysulfone and ceramic membranes for the separation of phenol in micellar-enhanced ultrafiltration

Micellar-enhanced ultrafiltration (MEUF) of phenol and a cationic surfactant, cetylpyridinium chloride (CPC), is studied using two polysulfone membranes of 5- and 50-kDa molecular weight cutoff (MWCO) and two ceramic membranes of 15- and 50-kDa MWCO. Filtrations are run under laminar cross-flow and steady-state conditions. The effect of operation variables (pressure and retentate flux) and membrane properties (nature and MWCO) on permeate flux, surfactant, and phenol rejections is analyzed. The permeate flux depends, among other variables, on the fouling favored by membrane-micelle interactions, which are strongest in the 50-kDa MWCO ceramic membrane. On the other hand, surfactant rejection is mainly determined by the pore size and influenced by the pressure for both 50-kDa MWCO membranes. An equilibrium distribution constant, K(s), of phenol between surfactant micelles and water is calculated. Its value is not significantly affected by operation conditions and membrane type. K(s) is also approximately 20% lower than the value determined in a previous work with batch dead-end ultrafiltration.     

Evaluation of clean-up agents for total petroleum hydrocarbon analysis in biota and sediments

Petroleum hydrocarbons (oil) are common environmental contaminants. For risk assessment purposes, their concentrations in environmental matrixes, such as biota and soils/sediments are frequently determined by solvent extraction and subsequent analysis with gas chromatography (GC) equipped with flame ionization detection (FID) or mass spectrometry (MS). Because the total GC detector response is labeled as total petroleum hydrocarbon (TPH) concentration and matrix compounds (lipids, organic matter) will contribute to this response, proper extract clean-up is crucial. Still, the choice for a specific clean-up material during open column chromatography often seems arbitrary, since no comparative study on clean-up agents for TPH analysis is available. Here, such a study is described and it is demonstrated that none of the commonly used agents fulfills the requirements of complete matrix compound removal and TPH recovery. A novel column filled with (top-down) 1 g of 33% (w/w) 1 M NaOH-impregnated and 2.2 g of 7% (w/w) H₂SO₄-impregnated silica gel is recommended for cleaning-up biota extracts, as it fully removes extracted lipids and yields acceptable TPH recoveries of around 90%, based on a certified oil reference standard. For sediment extracts, most columns tested resulted in a negligibly low contribution of matrix compounds to the overall detector response, but 5% deactivated Florisil or 10% deactivated aluminum oxide are preferable, because these materials yield the highest (∼95%) TPH recoveries.     

Optimization of Oxygen Parameters for Determination of Carbon and Nitrogen in Biochar Materials

Recently, there has been increased focus on biochar materials due to their ability to sequester carbon for long-term in soil. In the production of biochar or charcoal, plant biomass is heated in a low or no oxygen environment. This process results in a product with unique characteristics. But there is limited research on the standardization of methods for determining total carbon (C) and nitrogen (N) in the biochar materials whose properties vary by feedstock type and pyrolytic conditions. The objective of this study was to determine the oxygen dosing time (OT) and dose (OD) for total organic carbon (TC) and nitrogen (TN) analysis in biochar materials by dry combustion method (using Vario Max CNS analyzer). Central composite rotatable design was used to determine the effect of five levels of oxygen dosing time (OT) and dosing level (OD) on measurement of total carbon and total nitrogen in four types of plant originated biochars. OT and OD level interaction had significant impact on the measurement of TC and TN in all types of biochar materials. Optimum levels of OT and OD were determined as 103 to 110 sec and 180 to 232 ml/min, respectively.     

Extraction and clean-up strategies for the analysis of poly- and perfluoroalkyl substances in environmental and human matrices

The rapidly expanding field of per- and polyfluorinated alkyl substances (PFASs) research has resulted in a wide range of analytical methodologies to determine the human and environmental exposure to PFASs. This paper reviews the currently applied techniques for sample pre-treatment, extraction and clean-up for the analysis of ionic and non-ionic PFASs in human and environmental matrices. Solid phase extraction (SPE) is the method of choice for liquid samples (e.g. water, blood, serum, plasma), and may be automated in an on-line set-up for (large volume) sample enrichment and sample clean-up. Prior to SPE, sample pre-treatment (filtration or centrifugation for water or protein precipitation for blood) may be required. Liquid-liquid extraction can also be used for liquid samples (and does not require above mentioned sample pretreatment). Solid-liquid extraction is the commonly applied method for solid matrices (biota, sludge, soil, sediment), but automation options are limited due to contamination from polytetrafluorethylene tubings and parts applied in extraction equipment. Air is generally preconcentrated on XAD-resins sandwiched between polyurethane foam plugs. Clean-up of crude extracts is essential for destruction and removal of lipids and other co-extractives that may interfere in the instrumental determination. SPE, (fluorous) silica column chromatography, dispersive graphitized carbon and destructive methods such as sulphuric acid or KOH treatment can be applied for clean-up of extracts. Care should be taken to avoid contamination (e.g. from sample bottles, filters, equipment) and losses of PFASs (e.g. adsorption, volatilization) during sampling, extraction and clean-up. Storage at -20 degrees C is generally appropriate for conservation of samples.     

Current perspectives and recommendations for the development of mass spectrometry methods for the determination of allergens in foods

Allergen detection and quantification is an essential part of allergen management as practiced by food manufacturers. Recently, protein MS methods (in particular, multiple reaction monitoring experiments) have begun to be adopted by the allergen detection community to provide an alternative technique to ELISA and PCR methods. MS analysis of proteins in foods provides additional challenges to the analyst, both in terms of experimental design and methodology: (1) choice of analyte, including multiplexing to simultaneously detect several biologically relevant molecules able to trigger allergic reactions; (2) choice of processing stable peptide markers for different target analytes that should be placed in publicly available databases; (3) markers allowing quantification (e.g., through standard addition or isotopically labeled peptide standards); (4) optimization of protease digestion protocols to ensure reproducible and robust method development; and (5) effective validation of methods and harmonization of results through the use of naturally incurred reference materials spanning several types of food matrix.     

柴油馏分加氢脱硫动力学及反应器研究进展

当前各国环保法规对柴油中硫的质量分数的限制越来越严格。催化加氢脱硫是实现柴油低硫化的重要途径,动力学和新反应器的研究受到了研究者的广泛关注。本文介绍了柴油馏分中两种典型的难脱除含硫化合物二苯并噻吩和4,6-二甲基二苯并噻吩在各类催化剂上加氢脱硫的反应路径,比较了这两种模型含硫化合物的直接脱硫（DDS）和先加氢再脱硫（HYD）路径相对快慢的影响因素。详细综述了假1级、假2级、快慢1级、n级、L-H以及抑制剂H2S存在下的动力学模型在描述二苯并噻吩类模型化合物及真实油品的加氢脱硫过程中的研究现状,介绍了神经网络在柴油加氢动力学和脱硫率预测方面的研究进展。还对催化精馏、并流-逆流滴流床、两相床反应器等新型加氢脱硫反应器的最新发展作了综述,展望了加氢脱硫动力学及反应器的研究方向和面临的挑战。     

Simple algorithms for fitting and optimisation for multilinear gradient elution in reversed-phase liquid chromatography

The theory of the multilinear gradient elution in reversed-phase liquid chromatography (RP-HPLC) presented in [P. Nikitas, A. Pappa-Louisi, P. Agrafiotou, J. Chromatogr. A 1120 (2006) 299] is modified to increase its flexibility. In addition, it is embodied to simple algorithms for fitting gradient data and especially for resolution optimisation under multilinear gradient conditions. In particular, two new algorithms for fitting and one for optimisation are tested and compared with conventional algorithms. Their performance was examined using 13 o-phthalaldehyde (OPA) derivatives of amino acids with mobile phases modified by acetonitrile. It was found that the new proposed algorithms, a repeated application of the Levenberg-Marquardt (LM) method for fitting (R_LM) and a modified descent algorithm for optimisation (RND_D), in combination with the modified theory of the multilinear gradient elution can lead to high quality predictions of the retention times and optimisation results.     

Fast method for routine simultaneous analysis of methylmercury and butyltins in seafood

A simple, fast, and accurate method for the simultaneous determination of methylmercury (MeHg(+)), monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in seafood is proposed. The method makes use of relatively cheap instrumentation and allows simultaneous analysis of those four species in a routine basis. The sample is treated with methanolic potassium hydroxide in an ultrasound bath, derivatised with sodium tetraethylborate (NaBEt(4)), preconcentrated into n-hexane and analysed by gas chromatography with atomic emission detection (GC-MIP/AES). The soft extraction conditions provided by ultrasound energy prevent chemical decomposition of the analytes and allow fast and efficient recovery of the species considered. Both the extraction and the derivatisation/preconcentration steps were optimised. Detection limits of 34, 3, 6 and 8 ng g(-1) (dry mass) were obtained for MeHg(+), MBT, DBT and TBT, respectively, using the best experimental conditions found. The uncertainty of the analysis ranged from 11% (MeHg(+)) to 15% (MBT). The accuracy of the method was checked by the analysis of several certified reference materials, e.g., BCR 477 (mussel tissue, MBT, DBT and TBT), DOLT-2 (dogfish liver, MeHg(+)), BCR 463 (tuna fish, MeHg(+)) and NIST 2976 (mussel tissue, MeHg(+)) with satisfactory results. Several oyster samples collected in the estuary of the Oka River (Urdaibai, Unesco Reserve of the Biosphere, Basque Country) during four sampling campaigns in 2003-2004 were processed following the proposed procedure. Concentrations ranging from 65 to 149 ng g(-1) (MeHg(+)), 相似文献   

Thallimetric photochemical oxidation in titrimetric and spectrophotometric methods for the analysis of mixtures of oxalate and hydrogen peroxide

Thallium(III) in the presence of bromide photochemically oxidizes oxalate and hydrogen peroxide, whereas in the presence of a large excess of chloride, only oxalate is oxidized. Two procedures are based on these observations. In the titrimetric method (applied to mmol amounts of analytes) the thallium(I) formed is determined with bromate. In the spectrophotometric procedure (μmol amounts of analytes) unreduced thallium(III) is determined at 260 nm. In each case measurements are made after reaction under both conditions, so that both analytes can be determined.