Microstructure and phase characterizations of fly ash cements by alkali activation

Journal of Thermal Analysis and Calorimetry - Micro/mesoporous catalysts of ZSM-35/MCM-41 type were developed by mechanical synthesis method with the objective to use on the catalytic pyrolysis of...     

Studies of fly ash using thermal analysis techniques

Improved thermoanalytical methods have been developed that are capable of quantitative identification of various components of fly ash from a laboratory-scale fluidized bed combustion system. The thermogravimetric procedure developed can determine quantities of H₂O, Ca(OH)₂, CaCO₃, CaSO₄ and carbonaceous matter in fly ash with accuracy comparable to more time-consuming ASTM methods. This procedure is a modification of the Mikhail-Turcotte methods that can accurately analyze bed ash, with higher accuracy regarding the greater amount of carbonaceous matter in fly ash. In addition, in conjunction with FTIR and SEM/EDS analyses, the reduction mechanism of CaSO₄ as CaSO₄+4H₂ CaS + 4H₂O has been confirmed in this study. This mechanism is important in analyzing and evaluating sulfur capture in fluidized-bed combustion systems.     

Rapid slurry analysis of solid coal and fly ash samples

Coal and coal fly ash samples were analyzed as solid slurries. These preliminary experiments used fast sampling STPF procedures which omitted the pyrolysis step and the matrix modifier. The experiments also used an ultrasonic mixing device that automatically stirred the suspension just before the autosampler probe withdrew the aliquot which it would dispense onto the platform. The combination of these techniques made it possible to reduce the analytical time to less than 1 min per sample. Simple aqueous standards were used for calibration. The NIST SRM 1633a Coal Fly Ash was successfully analyzed for As, Pb and Tl, with results for Se in this material that suggested that more work was required to gain confidence in the determination. The SRM 1632a Coal was successfully analyzed for As and Pb. The methods were the same for both materials. A few mg of the dry solid powder was weighed directly into the autosampler cup followed by a weighed amount (about 1.5 ml) of suspending diluent The characteristic mass was calculated from several aliquots of simple aqueous standards and this value was used to calculate the amount of analyte delivered to the furnace. In the work reported here the detection limits for the elements determined were about 0.5–1 μg/g in the solid sample. With further experience these limits may be improved. The precision for replicates of slurries from the same cup varied from 2 to 10% depending upon the amount of solid sample delivered to the furnace.     

Natural radioactivity and hazard-level assessment of Portland cements in Turkey

The natural radioactivity levels and some radiological parameters of Turkish Portland cements (PC) originated in various regions were determined in this study. The activity concentration of cement samples for ²²⁶Ra, ²³²Th, and ⁴⁰K were measured using a gamma-ray spectrometer with high purity germanium radiation detector. The PC samples had activity concentrations of 33.0, 16.7, and 239.5 Bq kg⁻¹ for ²²⁶Ra, ²³²Th, and ⁴⁰K, respectively. The mean value of radium equivalent value (Ra_eq) was found to be 75.4 Bq kg⁻¹. The radium equivalent values in the cement samples were lower than the acceptable level of 370 Bq kg⁻¹. The calculated radiological parameters were found to be below the acceptance levels.

     

Compressive strength and hydration characteristics of high-volume fly ash concrete prepared from fly ash

Journal of Thermal Analysis and Calorimetry - This paper investigated the feasibility of replacing cement with fly ash (FA) mass ratios ranging from 40 to 70% to produce high-volume FA (HVFA)...     

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

Incineration methods are becoming increasingly important from the view point of the need to minimize the environmental impact of waste tyre disposal. Combustion of waste tyre, one high ash coal and tyre-coal blends with 10, 30 and 50% waste tyre were investigated by means of thermogravimetric analysis (TGA) carried out at 20 K min⁻¹ in the temperature range from ambient temperature to 1273 K. And effects of the mixed proportion between coal and waste tyre on the combustion process, ignition and burnout characteristics were also studied. The results indicate that the combustion of waste tyre is controlled by the emission of volatile matter, the regions are more complex for waste tyre (three or more peaks) than for coal (one peak). Also as compared with the case of burning only high ash coal, the incorporation of waste tyre can improve the combustion characteristics of high ash coal, especially the ignition performance and the peak weight loss compared with the separate burning of waste tyre and coal. Moreover, comparisons of the TG-DTG profiles between experimental and calculational results, it is indicate that there is a comparatively important difference, the co-combustion characteristics is the coupling effect between waste tyre and coal. The data resulting also showed that the co-combustion of waste tyre and low quanlitied coal as fuel is feasible.     

Instrumental neutron activation analysis of fly ash,aerosols and hair

Samples of coal, slag, emissions retained on the separating devices, fly ash, aerosols and hair taken in the area of coal-fired power plant were analyzed by means of instrumental neutron activation analysis. 13 to 23 elements were determined in the samples. The data obtained for emissions and aerosols were further evaluated by calculation of enrichment factors, correlation coefficients and by the ratio matching method. The concentrations of elements determined in the hair of exposed group were compared with the data of control and out control groups as well as with the recent data found for hair in other countries. It can be seen from the results that arsenic is the most serious pollutant in the area.     

Quantitative analysis of phase transition of heated Portland cement paste

This paper studies Portland cement paste heated up to different temperatures ranging from 105 to 1,000 °C by X-ray diffraction. The heated cement paste samples are kept isothermal in furnace for 6 h and cooled down to 100 °C. Then the samples are picked out and grinded into fine powders. 10 % Corundum is blended with cement paste powders as an internal standard. Quantitative phase analysis of cement paste samples is performed by Rietveld method. With the addition of a crystalline standard, the mass fractions of all crystalline phases as well as amorphous calcium silicate hydrate (C–S–H) are determined. The Rietveld analysis results are compared with independent measurements of the same material by thermal analysis (TG/DSC). The phase transition of Portland cement paste is discussed. An empirical relationship between the dehydration degree of C–S–H and the crystallization degree of C–S–H is derived.     

Adsorption of indigo carmine from aqueous solution using coal fly ash and zeolite from fly ash

Coal fly ash, a waste generated at the Figueira coal-fired electric power plant located in Brazil, was used to synthesize zeolite by hydrothermal treatment with NaOH solution at 100 °C for 24 h. The fly ash (FA) and this synthesized zeolite (ZM) that was characterized predominantly as hydroxy-sodalite were used as adsorbents for anionic dye indigo carmine from aqueous solutions. The samples were analyzed by instrumental neutron activation analysis (INAA) for the determination of As, Co, Fe, La, Mo, Na, Sb, Sc, Sm, Th, U and Zn. Effects of contact time and initial dye concentration were evaluated in the adsorption processes. The kinetics studies indicated that the adsorption followed the pseudo-second order kinetics and that surface adsorption and intraparticle diffusion were involved in the adsorption mechanism for both the adsorbents. The Langmuir isotherm model provided the best correlation of the experimental data. The maximum adsorption capacity was found to be 1.48 mg L⁻¹ for FA and 1.23 mg L⁻¹ for ZM. Laboratory leaching and solubilization tests conducted to classify this ZM as if was a waste residue according to the Brazilian regulation classified it as a residue non-hazardous and non-inert.     

Determination of sulphur in fly ash by instrumental proton activation analysis

A method for the determination of sulphur in fly ash by instrumental proton activation analysis using the³⁴S/p,n/^34mCl reaction was developed. The 2128.5 keV and 3305.0 keV -rays of^34mCl /t=32.0 min/ were measured on a Ge/Li/ -spectrometer, shielded with a lead absorber to attenuate low energy -rays. Irradiation and measuring conditions were optimized. The detection limit for instrumental analysis is 0.3 to 1 mg g^–1 and the standard deviation is cca. 4% for a typical sample.     

Instrumental activation analysis of coal and fly ash with thermal and epithermal neutrons

A systematic comparison of thermal and epithermal irradiations in the instrumental activation analysis of coal and fly ash was made. From a total of 44 elements, the epithermal irradiation technique appeared advantageous in 20 cases, namely Ni, Ga, As, Se, Br, Rb, Sr, Zr, Mo, In, Sb, Cs, Ba, Sm, Ho, Hf, Ta, W, Th and U. Data are presented for the National Bureau of Standards’ coal (SRM 1632) and fly ash (SRM 1633).     

Rapid analysis of PAHs in fly ash using thermal desorption and fast GC-TOF-MS

Polycyclic aromatic hydrocarbons (PAHs) are semivolatile organic compounds that may form as a result of incomplete combustion of organic materials. After they are produced in combustion systems, this class of chemicals can be emitted with flue gas or adsorbed in combustion residues such as fly ash and bed ash. The purpose of this study is to develop a thermal extraction (TE) method for the determination of the 16 U.S. Environmental Protection Agency specified priority PAH pollutants in fly ash. The commonly used method for determining PAHs in solid wastes is solvent extraction followed by gas chromatography (GC) or GC-mass spectrometry (MS) analysis. This method is work- and time-intensive and produces solvent waste. In this study, the samples are analyzed using TE and fast GC-time-of-flight (TOF)-MS. The complete process from extraction to analysis can be achieved in less than one hour. The results indicate that the TE-GC-TOF-MS method has good linear range from 1.5 to 60 micro g/g for all 16 PAHs. The recoveries for the 16 target PAHs vary between 83% and 94%.     

Fast physics-chemical characterization of fly ash

This paper analyzes the effect of fly ash chemical character on early Portland cement hydration and the possible adverse effects generated by the addition of gypsum. Behaviour was analyzed for pure Portland cements with varying mineralogical compositions and two types of fly ash, likewise differing in chemical composition, which were previously characterized under sulphate attack as: silicic-ferric-aluminic or aluminic-silicic ash in chemical character, irrespective if they are in nature, siliceous or siliceous and aluminous materials according to the ASTM C 618-94a. The experimental results showed that water demand for paste with a normal consistency increased with the replacement ratio in fly ash with a more aluminic than silicic chemical character, whereas it declined when silicic-ferric-aluminic ash was used. On the other hand, the differences between the total heat of hydration released at the first valley and the second peak also clearly differentiated the two types of ash. While the relative differences increased in the more aluminic than silicic ash, they declined in the more silicic than aluminic. In another vein, the findings indicate that within a comparable Blaine fineness range, the reactive alumina (Al₂O₃^r−) content in pozzolanic additions has a greater effect on mortar strength than the reactive silica (SiO₂^r−) content, at least in early ages up to 28 days. Finally, the adverse effect generated in the presence of excess gypsum is due primarily to the chemical interaction between the gypsum and the C₃A in the Portland cement and the reactive alumina (Al₂O₃^r−) in the fly ash.     

Thermogravimetric analysis of cellulose

An application of TGA technique to elucidate the chain reaction mechanism of cellulose pyrolysis is discussed. The mathematical expressions for isothermal kinetics are modified for use with temperature-programmed kinetics. It is shown that in temperature-programmed kinetics, the initial reaction should theoretically be a pseudo zero-order type, whereas the latter part should be a pseudo first-order type. Experimental data from the present study and from the literature are in good agreement with the theory. Energies of activation for the initiation and the propagation steps of cellulose pyrolytic reactions are analyzed from TG data. Various cellulose samples, such as adsorbent cotton, vibratory ball-milled absorbent cotton, mercerized commercial yarn, mercerized and treated commercial yarn, dewaxed-kiered cotton, and microcrystalline cellulose are included in this study. A basic problem which is associated with all thermogravimetric kinetic expressions is also discussed.     

Determination of 30 elements in coal and fly ash by thermal and epithermal neutron-activation analysis

Thirty elements are determined in coal and fly ash by instrumental neutron-activation analysis using both thermal and epithermal irradiation. Gamma-ray spectra were recorded 7 and 20 days after the irradiations. The procedure is applicable to the routine analysis of coals and fly ash. Epithermal irradiation was found preferable for the determination of Ni, Zn, As, Se, Br, Rb, Sr, Mo, Sb, Cs, Ba, Sm, Tb, Hf, Ta, W, Th and U, whereas thermal irradiation was best for Sc, Cr, Fe, Co, La, Ce, Nd, Eu, Yb and Lu. Results for SRM 1632 (coal) and SRM 1633 (fly ash) agree with those of other investigators.     

Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel aging

Structural changes in fly ash geopolymers activated with different sodium hydroxide and silicate concentrations are investigated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy over a period of 200 days. A strong correlation is found between the concentration of silicate monomer in the activating solution and the position of the main Si-O-T stretching band in the FTIR spectrum, which gives an indication of the relative changes in the gel Si/Al ratio. The FTIR spectra of geopolymer samples with activating solution concentrations of up to 1.2 M SiO2 indicate that an Al-rich gel forms before the final gel composition is reached. The time required for the system to reach a steady gel composition depends on the silicate activating solution concentration and speciation. Geopolymers activated with solutions containing predominantly high-order silicate species rapidly reach a steady gel composition without first forming an Al-rich gel. A minimum silicate monomer concentration of approximately 0.6 M is required to shift the geopolymer synthesis mechanism from hydroxide activation to silicate activation. Silicate speciation in the activating solutions also affects zeolite formation and geopolymer microstructures, with a more homogeneous microstructure and less zeolite formation observed at a higher SiO2 content.     

Total reflection X-ray fluorescence analysis of fly ash from Bulgarian coal-fired power plants

The contents of Cl, Ca, K, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Rb, Sr, Ba and Pb in raw coal fly ash from five Bulgarian power plants were determined by total reflection X-ray fluorescence (TXRF), using gallium as the internal standard. The samples were analysed as in slurry form in Triton? X-114. The experimental parameters, such as grain size, concentrations of fly ash slurry and excitation time were optimised. For validation of the method, the certified reference material BCR-176R fly ash was used. The precision of the results obtained is characterised by a relative standard deviation of approximately 10%. The resulting data confirm the suitability of TXRF for the simultaneous determination of major, minor and trace elements in coal fly ash samples. Further advantages provided by TXRF are easy sample preparation (no sample dissolution) and the small sample amount required for analysis.     

Speciation of chromium in Australian fly ash

The concentrations of chromium (III) and (VI) in fly ash from nine Australian coal fired power stations were determined. Cr(VI) was completely leached by extraction with 0.01 M NaOH solution and the concentration was determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). This was confirmed by determining Cr(III) and Cr(VI) in the extracts of fly ash that had been spiked with chromium salts. These analytical measurements were done using a combination of ion-exchange chromatography and ICP-AES. The elutant was 0.05 M HNO₃ containing 0.5%-CH₃OH. When the column was operated at a flow rate of 1.2 ml min⁻¹ and samples were injected by use of a sample loop with a volume of 100 μl, Cr(III) and Cr(VI) in sample solution was exclusively separated within approximately 10 min. The detection limits (3σ) were 5 ng for Cr(III) (0.050 mg l⁻¹) and 9 ng for Cr(VI) (0.090 mg l⁻¹), respectively. A relative standard deviation of 1.9% (n = 6) was obtained for the determination by IC-ICP-AES of 0.25 mg l⁻¹ Cr(III) and Cr(VI).