Simultaneous determination of aluminium and iron in glasses,phosphate rocks and cement using first- and second-derivative spectrophotometry

First- and second-derivative spectrophoto-metric methods for the simultaneous determination of aluminium and iron in their mixtures are described. The methods are based on the colored complexes formed by aluminium and iron with hematoxylin in the presence of cetyltrimethylammonium bromide as a surfactant. The zero-crossing method has been utilized to measure the first- and second-derivative value of the derivative spectrum. Aluminium (0.05-1 microg ml(-1)) could be determined in the presence of iron (0.09-1.6 microg ml(-1)) and vice versa. The detection limits of aluminium and iron are 0.01 and 0.09 microg ml(-1), respectively in the first-derivative mode and 0.014 and 0.1 microg ml(-1) in the second-derivative mode. The proposed method has been applied to the simultaneous determination of aluminium and iron in glasses, phosphate rocks, cement and magnesite alloy.     

Kinetics of Dissolution of Glassy Fertilizers

Slowly soluble phosphate glasses are a promising material for new environmentally safe fertilizers. The kinetics of the dissolution of phosphate glasses used for the development of fertilizers was studied.     

固体NMR在玻璃微结构研究中的应用

核磁共振(NMR)是探测物质微结构的有力手段,本文简要介绍了固体NMR技术在玻璃微结构研究中的应用,尤其是近年来的新进展,包括硅酸盐玻璃、硼酸盐玻璃、磷酸盐玻璃以及含铝的氧化物玻璃等玻璃体系。     

Sodium and silver phosphate glasses doped with chlorides of Fe,Mn and Zn

A number of samples of sodium and silver phosphate glasses doped with various compositions of some transition metals viz. iron, manganese and zinc chlorides alongwith undoped samples of sodium and silver phosphate glasses were synthesized and characterized by X-ray diffraction, IR spectral, electrical conductivity and differential scanning calorimetry (DSC). The glass transition temperature (T _g) and crystallization temperature (T _c) values obtained from DSC curves were found to increase with increasing concentration of the dopant Fe/Mn/Zn chlorides in both sodium and silver phosphate glasses and the following sequence is observed: T _g(–FeCl₃)>T _g(–MnCl₂)>T _g(–ZnCl₂) T _c(–FeCl₃)>T _c(–MnCl₂)>T _c(–ZnCl₂) The increase in T _g and T _c values indicate enhanced chemical durability of the doped glasses. The electrical conductivity values and the results of FTIR spectral studies have been correlated with the structural changes in the glass matrix by the addition of different transition metal cations as dopants.     

Correlation of ion dynamics and structure of superionic tellurite glasses

Ion dynamics and structure of a series of superionic AgI-doped silver tellurite glasses have been investigated in this paper. The composition dependence of the dc conductivity and the activation energy of these glasses has been compared with those of AgI-doped silver phosphate and borate glasses. We have observed that the conductivity increases and the activation energy decreases with increase of AgI content and that the tellurite glasses have higher conductivity than those for phosphate or borate glasses. We have analyzed the ac electrical data in the framework of the power law and the electric modulus formalisms. We have established a correlation between the crossover rate of the mobile silver ions and the rearrangement of the structural units in tellurite glasses. The scaling of the conductivity spectra has been used to interpret the temperature and composition dependence of the relaxation dynamics. Analysis of the dielectric relaxation in the framework of modulus formalism indicates an increase in the ion-ion cooperation in the glass compositions with increasing AgI content.     

Inorganic glasses as crosslinked polymers: The relationship between crosslink density and transformation temperature in phosphate glasses

Most substances that form stable glasses are polymers, and inorganic oxide glasses are no exception. Because most oxide glasses are highly crosslinked polymers it is not possible to measure properties in solution, and parameters such as molecular weight and molecular weight distribution which are used to characterize organic polymers are meaningless in the context of oxide glasses. Instead, the network connectivity or a measure of crosslink density must be used to characterize their structure. In silicate glasses, the network connectivity can be changed significantly only by altering the composition, but phosphate glasses of fixed composition can be prepared with variable hydroxyl contents and consequently different crosslink densities. In this paper it is shown that the relationship between the transformation temperature T(x) and crosslink density x of phosphate glasses is similar to that observed for organic polymers and can be described by an equation of the form where T(0) is the transformation temperature of the corresponding linear polymer and K is a constant which is approximately the same for three different phosphate glasses that have been studied.     

Protonic Conduction and O-H Bonding State in Phosphate Glasses

Abstract

Protons in alkaline-earth phosphate glasses give much higher mobility than those in silicate glasses. This is caused by the difference in O-H bonding state. Protons in P-OH form a strong hydrogen bonding with oxygen anion, resulting in formation of weak O-H bond.

The electrical conductivity of the glasses is proportional to the square of the proton concentration. The activation energy for the conduction is related to ν_OH, peak wavenumber of infrared absorption band (around～3000 cm^?1), due to fundamental O-H stretching vibration. The mobility of protons increases with decreasing ν_OH, which depends on the species of ions included in the phosphate glasses.     

Oxidation State of Neptunium and Plutonium and Their Leaching from Sodium–Aluminum–(Iron) Phosphate Glasses

The oxidation states of neptunium and plutonium in doped sodium–aluminum–(iron) phosphate glasses have been determined by X-ray photoelectron spectroscopy. Neptunium is present in the form of Np(IV) as Np⁴⁺ and, in smaller amounts, in the form of Np(V) as neptunyl ions. Plutonium is present mainly in the form of Pu(IV) and additionally Pu(III). The most easily water-leachable element is neptunium, which is attributed to its existence in the mobile form of neptunyl (NpO₂)⁺. The leaching rates of plutonium and impurity americium are approximately two orders of magnitude lower.     

Lead and aluminum bonding in Pb-AI metaphosphate glasses

The bonding properties of cations in phosphate glasses determine many short- and medium-range structural features in the glass network, hence influencing bulk properties. In this work, Pb-Al-metaphosphate glasses (1 - x)Pb(PO(3))(2).xAI(PO(3))(3) with 0 < or = x < or = 1 were analyzed to determine the effect of the substitution of Pb by AI on the glass structure in the metaphosphate composition. The glass transition temperature and density were measured as a function of the Al concentration. The vibrational and structural properties were probed by Raman spectroscopy and nuclear magnetic resonance of (31)P, (27)AI, and (207)Pb. Aluminum incorporates homogeneously in the glass creating a stiffer and less packed network. The average coordination number for AI decreases from 5.9 to 5.0 as x increases from 0.1 to 1, indicating more covalent AI-O bonds. The coordination number of Pb in these glasses is greater than 8, showing an increasing ionic behavior for compositions richer in AI. A quantitative analysis of the phosphate speciation shows definite trends in the bonding of AIO(n) groups and phosphate tetrahedra. In glasses with x < 0.48, phosphate groups share preferentially only one nonbridging O corner with an AIO(n) coordination polyhedron. For x > 0.48 more than one nonbridging O can be linked to AIO(n) polyhedra. There is no corner sharing of O between AIO(n) and PbO(n) polyhedra nor between AIO(n) themselves throughout the compositional range. The PbO(n) coordination polyhedra show considerable nonbridging O sharing, with each O participating in the coordination sphere of at least two Pb. The bonding preferences determined for Al are consistent with the behavior observed in Na-AI and Ca-AI metaphosphates, indicating this may be a general behavior for ternary phosphate glasses.     

Identification of chromium and nickel sites in zinc phosphate glasses

Optical and EPR investigations of chromium and nickel doped zinc phosphate glasses are carried out at room temperature to evaluate crystal field, spin-Hamiltonian and bonding parameters. For Cr³⁺ ion, the site symmetry is ascribed to a distorted octahedron, whereas the Ni²⁺ ion is located in a near octahedral site. In addition, the bonding parameters suggest covalent nature for Cr³⁺ and a moderate covalent nature for Ni²⁺ in the zinc phosphate glasses.     

Mesoporous nanotubes of iron phosphate: synthesis, characterization, and catalytic property

Iron phosphate nanotubes with mesoporous walls are solvothermally synthesized using sodium dodecyl sulfate (SDS) as a template. With different template concentrations, various shapes of nanosized iron phosphates can be obtained. When the concentration of SDS is set at the transition regions between the lamellar and the hexagonal mesophases, according to its phase diagram, the coassembly of iron phosphate precursor and SDS forms a flake-type mesoporous iron phosphate. Otherwise, nanoparticles or bulky sheets of iron phosphates are obtained. The followed solvothermal treatments on the mesoporous iron phosphate flakes produce iron phosphate nanotubes with mesoporous walls. The removal of the surfactant by acetate exchange and heat treatment results in the clean mesoporous nanotubes of iron phosphate with diameters of 50-400 nm and lengths of several microns. The nanotubular and mesoporous iron phosphate possesses a specific surface area of 232 m2/g and a bimodal distribution of pore sizes, corresponding to the size of mesopores in the walls and the diameter of the nanotubes, respectively. The novel nanotubular iron phosphate with composite meso-macroporous structure, in favor of the diffusion of reactive molecules, has been tested for direct hydroxylation of benzene with hydrogen peroxide and has shown better catalytic performance compared with the conventional particulate mesoporous iron phosphate.     

Small-angle X-ray scattering characterization of inorganic glasses

Small-angle X-ray scattering is a powerful tool in glass science. The present paper reviews the characterization of inorganic glasses by means of this technique, with specific concern for four areas; (A) the correlations between structure and properties; (B) the middle-range order; (C) the kinetics of phase separation; and (D) the techniques of glass preparation. SAXS studies on various glass systems, e.g. vitreous silica, phosphate glasses, colour glasses, photochromic glasses, and glass-ceramic-forming systems, are described in terms of this approach.     

Characterization of polyphosphate glasses preparation using CRTA

We used CRTA for the study of both the elaboration and characterization of several polyphosphate glasses. We show that controlled transformation rate thermal analysis is able to remove a systematic error present in classical thermal analysis, in the study of the precursor of the phosphate glass. We show too that in CRTA, water release in the phosphate glasses can take place by diffusion phenomena at low temperature and that it is not due to the crystallization. These two examples illustrate some interests of this inverse method in the study of the decomposition of inorganic compounds with water release.     

Influence of MgO (CaO) on the structure of silicate-phosphate glasses

Thermal and structural properties of model silicate-phosphate glasses containing the different amounts of the glass network modifiers, i.e. Mg²⁺ and Ca²⁺ were studied. To explain the changes of the parameters characterizing the glass transition effect (T_g, Δc_p) and the crystallization process (T_c, ΔH) depending on the cations modifiers additions, analysis of the bonds and chemical interactions of atoms in the structure of glasses was used. ³¹P MAS-NMR spectra of SiO₂–P₂O₅–MgO(CaO)–K₂O glasses show that the phosphate complexes are mono- and diphosphate. It has been found that increasing amounts of Mg²⁺ or Ca²⁺ cations in the structure of glasses causes the reduction of the degree of polymerization of the phosphate framework (Q¹→Q⁰). The influence of increasing of modifiers in the structure of silicate- phosphate glasses on the number of non-bridging oxygens per SiO₄ tetrahedron and density of glasses was presented.     

Specific features of methods for obtaining Ti(III) and its concentration effect on optical properties of potassium-aluminum phosphate glass

Potassium-aluminum phosphate glasses with different concentrations of Ti(III) activator were prepared and their spectral properties were studied.     

The effect of mechanical activation on the thermal reactions of P2O5–Al2O3–Fe2O3–Na2O phosphate glasses

The effect of mechanical activation on the structure and thermal reactions of glasses has been studied on the example of Na–Al–Fe phosphate glasses. These glasses are used in nuclear technology for immobilization of radioactive waste. The glasses were activated by grinding in a planetary mill. Mechanical activation causes a decrease of the T _g temperature as well as of the glass crystallization temperature. The type of crystalline phases formed and the quantitative proportions between them are changing. Analysis of inter-atomic interactions in the structure of glass was applied to explain the observed regularities governing the crystallization of the activated glasses.     

Structural and Electrosurface Properties of Iron-Containing Porous Glasses in NaCl Solutions. I. Structural and Transport Characteristics of Porous Glasses

The structural (structural resistance coefficient, volume porosity, average pore radius, and specific surface area) and transport (specific electrical conductivity and counterion transport numbers) characteristics of high-silica micro- and macroporous glasses with different compositions (magnetite-free and magnetite- containing glasses) have been compared in solutions of an indifferent electrolyte (sodium chloride). It has been shown that the incorporation of iron(III) oxide into basic sodium-borosilicate glass changes the structure of the pore space of both microporous glasses produced by acidic leaching and macroporous glasses obtained from the microporous samples by additional alkaline treatment. Moreover, it has been found that the transport characteristics of microporous glasses with different compositions are similar, while, for magnetite- phase-containing macroporous glasses, the specific conductivity of a pore solution and counterion transport numbers are increased.     

Correlation between glass transition effect and structural changes in multicomponent iron phosphate-silicate glasses

Iron phosphate-silicate glasses from P₂O₅–SiO₂–K₂O–MgO–CaO–Fe₂O₃ system were subjected to the thermal and spectroscopic studies in order to gain information about their structure and thermal behavior in the range of glass transition effect. Research includes results obtained via DSC, MIR and DRIFT spectroscopy. Designated values of glass transition temperature and specific heat change slightly increases with Fe₂O₃ incorporation. Spectra collected during thermal treatment of glasses containing 2 and 30 mol% Fe₂O₃ exhibited various changes. Fe₂O₃ addition affected the glass structure by its reinforcement and led to its preservation during thermal treatment. The connection between density, molar volume, oxygen packing density and the chemical composition’s alteration were also established because of the direct dependence of physical properties and the structure. Obtained results supported thermal and spectroscopic studies. Conducted research is considered as a contribution to the knowledge about the family of iron phosphate glasses, which are known from their interesting properties and widely used applications.

     

Thermal properties of Na2O–P2O5–Fe2O3 polyphosphate glasses

Journal of Thermal Analysis and Calorimetry - Iron phosphate glasses are materials that can have many applications like durable matrixes in waste immobilization techniques, biomaterials,...     

Diffusion of actinides in glasses containing simulated radioactive wastes

Diffusion coefficients of radionuclides²³⁷Np,²³⁹Pu and²⁴¹Am in simulated alumina phosphate and alumina borosilicate glasses at temperatures lower than their transformation temperature were determined. Actinides are known to be the least mobile elements. In particular, the diffusion coefficients of actinides in alumina phosphate glasses at 673 K are about 10^–18 m²·s^–1, and in alumina borosilicate at 773 K about 10^–19 m²·s^–1. It is shown that crystallization of glasses leads to increasing²³⁷Np diffusion mobility. It is also shown that a rather small quantity of water absorbed by a crystallized alumina phosphate glass in tensifies low-temperature migration of²³⁷Np.