Effect of modified graphene and microwave irradiation on the mechanical and thermal properties of poly(styrene‐co‐methyl methacrylate)/graphene nanocomposites

The effect of modified graphene (MG) and microwave irradiation on the interaction between graphene (G) and poly(styrene‐co‐methyl meth acrylate) [P(S‐co‐MMA)] polymer matrix has been studied in this article. Modification of graphene was performed using nitric acid. P(S‐co‐MMA) polymer was blended via melt blending with pristine and MG. The resultant nanocomposites were irradiated under microwave at three different time intervals (5, 10, and 20 min). Compared to pristine graphene, MG showed improved interaction with P(S‐co‐MMA) polymer (P) after melt mixing and microwave irradiation. The mechanism of improved dispersion and interaction of modified graphene with P(S‐co‐MMA) polymer matrix during melt mixing and microwave irradiation is due to the presence of oxygen functionalities on the surface of MG as confirmed from Fourier transform infrared spectroscopy. The formation of defects on modified graphene and free radicals on P(S‐co‐MMA) polymer chains after irradiation as explained by Raman spectroscopy and X‐Ray diffraction studies. The nanocomposites with 0.1 wt% G and MG have shown a 26% and 38% increase in storage modulus. After irradiation (10 min), the storage modulus further improved to 11.9% and 27.6% of nanocomposites. The glass transition temperature of nanocomposites also improved considerably after melt mixing and microwave irradiation (but only for polymer MG nanocomposite). However, at higher irradiation time (20 min), degradation of polymer nanocomposites occurred. State of creation of crosslink network after 10 min of irradiation and degradation after 20 min of irradiation of nanocomposites was confirmed from SEM studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Physical and mechanical properties of graphene oxide/polyethersulfone nanocomposites

The aim of this study was to investigate physical and mechanical properties of graphene oxide (GO)/polyethersulfone (PES) nanocomposite films. The films were produced by solution casting method. The mechanical properties of composite films were evaluated by tensile test. A significant enhancement in the mechanical properties of neat PES films was obtained incorporating a small amount of GO loading (0.05–1 wt.%). The highest tensile strength was observed at 1 wt.% of GO. Comparisons were made between experimental data and the Halpin–Tsai model predictions for the tensile strength and modulus of GO/PES composites. The effect of an orientation factor on model predictions was also acquired. The hydrophilicity of the nanocomposite was evaluated by assessing contact angle and enhanced wet ability of the films was obtained with increasing the amount of GO up to 1%. The morphology of the nanocomposites was investigated using scanning electron microscopy and transmission electron microscopy and the results revealed a good dispersion of GO in the PES matrix. The thermal behavior of the composite was also studied. Thermal stability of composites was increased by adding the GO. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and properties of silanized waterborne polyurethane/graphene nanocomposites

A series of silanized waterborne polyurethane (WPU)/graphene oxide (GO) chemical hybrids were synthesized from polycaprolactone diol, isophorone diisocyanate, dimethylol butanoic acid, and (3-aminopropyl) triethoxysilane with GO as multifunctional crosslink as well as reinforcing filler. With the addition of GO, dispersion size greatly decreased due to the increased water phase viscosity, while it increased after chain extension reaction due to the migration of GO into the PU particles. The GO covalently bonded to WPU via the sol–gel type reaction augmented contact angle, glass transition temperature (Tg), hardness, and Young’s modulus of the cast film up to 1 %. However, the effects were less pronounced at high content (1.5 %) due to the agglomeration of GO particles.     

Polyimide nanocomposites based on functionalized graphene sheets: Morphologies,thermal properties,and electrical and thermal conductivities

Polyimide (PI) films were prepared by reacting 4,4′-(4,4′-isopropylidene-diphenoxy)-bis(phthalic anhydride) and 1,3-bis(4-aminophenoxy)benzene. The 4-phenylbutylamine-functionalized graphene sheets (PBA-GSs) used for the preparation of the PI nanocomposite films were prepared by mixing a dispersion of graphite oxide with a solution of the ammonium salt of 4-phenylbutylamine (PBA). PI nanocomposite films containing different amounts of PBA-GS (0–10 wt%) were compared in terms of their morphologies, thermal properties, and electrical and thermal conductivities. Only a small amount of PBA-GS was required to improve the thermal properties and thermal conductivities of the PI; the maximum enhancements in these parameters were observed at 1 and 3 wt% PBA-GS, respectively. In contrast, the electrical conductivity of the PI hybrid films continued to increase with increasing PBA-GS content from 1 to 10 wt%.     

Influence of MWCNT morphology on dispersion and thermal properties of polyethylene nanocomposites

In this study a series of multi-walled carbon nanotube (MWCNT)/Polyethylene (PE) composites with different kinds and several concentrations of carbon nanotubes (CNTs) were investigated. The morphology and degree of dispersion of the fillers in the polymer matrix at different length scales was investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Both individual and agglomerated MWCNTs were evident but a good dispersion was observed for some of them. TGA measurements were performed on nanocomposites in order to understand if CNTs affect the stabilization mechanism during thermal and oxidative degradation. The analysis demonstrates that MWCNTs presence slightly delays thermal volatilisation (15-20 °C) without modification of thermal degradation mechanism. In contrast, thermal oxidative degradation in air is delayed up to about 100 °C dependently from MWCNTs concentration, in the range used here (0.1-2.0 wt%), and degree of dispersion. The stabilization is due to the formation of a thin protective layer of entangled MWCNTs kept together by carbon char generated on the surface of the nanocomposites as shown by SEM images taken on degradation residues.     

A simple and green route to transparent boron nitride/PVA nanocomposites with significantly improved mechanical and thermal properties

A simple and green method is developed to prepare hexagonal boron nitride(h-BN)/poly(vinyl alcohol) (PVA) nanocomposites by using water as a common solvent of h-BN nanosheets and PVA.The obtained h-BN/PVA nanocomposites are highly transparent,and have significantly improved mechanical and thermal properties.They may outperform nano-clay and nano-alumina/PVA nanocomposites as flexible optoelectronic devices,optical windows and heat-releasing materials operated in oxidative or corrosive environment.     

Effect of thermal annealing on the crystalline structure of PVDF/PMMA-modified graphene nanocomposites

Abstract

Poly(vinylidene fluoride)-based nanocomposite films with different loadings of PMMA-modified graphene sheets were prepared by a solution-mixing and solvent casting method. The prepared films were annealed at three different temperatures and the crystalline structures of the samples were investigated. X-ray diffraction data confirmed the PMMA-modified graphene nanosheets enhanced the preferential β-crystalline structure when increasing the annealing temperature to 90?°C, while increasing the annealing temperature to 120?°C led to a β → γ phase conversion. The tendency of the graphene sheets to restack by increasing the annealing temperature was confirmed by XRD. The PMMA-modified graphene sheets, however, didn’t showa nucleating effect on the PVDF crystallizationduring DSC cooling scans.     

Influence of SEBS-g-MA on morphology, mechanical, and thermal properties of PA6/PP/organoclay nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organically modified clay (organoclay) toughened with maleated styrene-ethylene-butylene-styrene (SEBS-g-MA) were prepared by melt compounding using co-rotating twin-screw extruder followed by injection molding. X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to characterize the structure of the nanocomposites. The mechanical properties of the nanocomposites were determined by tensile, flexural, and notched Izod impact tests. The single edge notch three point bending test was used to evaluate the fracture toughness of SEBS-g-MA toughened PA6/PP nanocomposites. Thermal properties were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). XRD and TEM results indicated the formation of the exfoliated structure for the PA6/PP/organoclay nanocomposites with and without SEBS-g-MA. With the exception of stiffness and strength, the addition of SEBS-g-MA into the PA6/PP/organoclay nanocomposites increased ductility, impact strength and fracture toughness. The elongation at break and fracture toughness of PA6/PP blends and nanocomposites were increased with increasing the testing speed, whereas tensile strength was decreased. The increase in ductility and fracture toughness at high testing speed could be attributed to the thermal blunting mechanism in front of crack tip. DSC results revealed that the presence of SEBS-g-MA had negligible effect on the melting and crystallization behavior of the PA6/PP/organoclay nanocomposites. TGA results showed that the incorporation of SEBS-g-MA increased the thermal stability of the nanocomposite.     

Effects of cellulose nanofibrils on the structure and properties on PVA nanocomposites

A green method—joint mechanical grinding and high pressure homogenization—was used to defibrillate paper pulp into nanofibrils. The prepared cellulose nanofibrils (CNF) were then blended with PVA in an aqueous system to prepare transparent composite film. The size and morphology of the nanofibrils and their composites were observed, and the structure and properties were characterized. The results showed that CNFs are beneficial to improve the crystallinity, mechanical strength, Young’s modulus, T _g and thermal stability of the PVA matrix because of their high aspect ratio, crystallinity and good compatibility. Therefore, nano cellulosic fibrils were proven to be an effective reinforcing filler for the hydrophilic polymer matrix. Moreover, the green fabrication approaches will be helpful to build up biodegradable nanocomposites with wide applications in functional environmentally friendly materials.     

镍/碳纳米纤维复合物的制备及其吸波性能

以乙二胺为碳源,自制的镍纤维为催化剂,利用原位复合的方法制备得到一系列不同比例的镍/碳纤维复合物,并研究了其吸波性能.由于镍纤维和碳纤维均具有一定的电磁波耗散能力,因此得到的产物无需任何处理,可以直接作为吸波材料使用.结果表明,通过改变镍纤维的加入量,可以改变产物的镍碳比,进而实现对复合材料吸波性能的调控.在合适比例条件下制备得到的纤维复合物具有较好的吸波性能,当纤维复合物含量为25%时,其反射率的最小值可达-14.3dB.该材料在轻质吸波材料领域具有很好的应用价值.     

GO/PVA nanocomposites with significantly enhanced mechanical properties through metalion coordination

In this study, a simple and efficient way is demonstrated to create strong interfacial interaction between graphene oxide(GO) filler and poly(vinyl alcohol)(PVA) matrix through metal ion coordination. The coordination bonding provides efficient load transfer during the tensile process, and enhances the mechanical properties of the nanocomposites significantly. After being coordinated with Cu(Ⅱ) ions, GO/PVA composites show much higher Young's moduli and yield stresses than pure PVA and noncoordinated GO/PVA. UV–vis and FTIR spectra are performed to confirm the successful coordination between GO and PVA. Ethylene diamine tetraacetic acid disodium salt(EDTA-2 Na) is used to confirm the important role of coordination in enhancing the composites. This research provides a new approach to manufacture polymer-matrix nanocomposites with significantly improved mechanical performances.     

LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low‐density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1‐nm thickness and good transparency was synthesized using the well‐known Hummers's method. Fourier transform infrared and X‐ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are improved 65% and 92% by adding 7 wt% of GO and RGO, respectively. The tensile measurements showed that maximum tensile strength emerged in 3 wt% of loading for RGO and 5 wt% for GO. The measured oxygen and carbon dioxide permeability represented noticeably the attenuation of gas permeability in composite films compared with pristine LDPE/EVA blend. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparations and properties of waterborne polyurethane/allyl isocyanated-modified graphene oxide nanocomposites

We synthesized waterborne polyurethane (WPU)/allyl isocyanate modified graphene oxide (iGO) nanocomposites by UV curing, and the effects of iGO on the mechanical, dynamic mechanical, and thermal properties of the nanocomposites were systematically investigated. It was shown that the iGO chemically incorporated into the WPU chains by covalent bonding acts as a multifunctional cross-linking agent as well as reinforcing filler. Consequently, the tensile strength, glassy and rubbery state moduli, glass transition temperature, and thermal stability of the WPU were significantly increased up to an iGO content of 1%, beyond which most of the above properties showed a decrease, due probably to the auto-inhibition of the allyl compounds.     

Influence of the graphite type on the synthesis of polypropylene/graphene nanocomposites

In this work, the synthesis of polypropylene (PP)/graphene nanosheet (GNS) nanocomposites by in situ polymerization using metallocene catalysts was studied. Initial reactions were performed using rac‐Et(Ind)₂ZrCl₂ and rac‐Me₂Si(Ind)₂ZrCl₂ catalysts to select the best one to obtain good molecular weight, thermal properties, and tacticity. Subsequently, PP nanocomposites with different loadings of GNS were obtained. GNS from two different sources [Graphite Nacional (GN) and Graphite Aldrich (GA)] have been used, and the differences between the obtained nanocomposites were evaluated. The GNS and nanocomposites were studied by scanning electronic microcopy, transmission electronic microcopy, and X‐ray diffraction. They showed that the GN nanosheets had lower crystal size and diameter than the GA nanosheets and dispersed better in the PP matrix. Differential scanning calorimetry analyses of both types of nanocomposites showed an increase in the crystallization temperature with increasing graphite loading. The polymeric materials were also characterized by GPC, thermogravimetric analysis, and ¹³C NMR. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of near IR induced self-healable polyurethane/graphene nanocomposites

A series of self-healable polyurethane (SHPU)/modified graphene (MG) nanocomposites were synthesized from poly(tetramethylene glycol) (PTMG) and 4,4′-methylene diphenyl diisocyanate (MDI) with minute amounts (0–1 wt%) of MG which was chemically modified graphene oxide (GO) with phenyl isocyanate and reduced in the presence of phenylhydrazine.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

Influence of microwave irradiation on enzyme kinetics

The in vitro effect of 2.45 GHz microwave irradiation on porcine pepsin activity under controlled temperature and absorbed microwave power via kinetic parameters was evaluated. Kinetic study with respect of time of irradiation demonstrated the existence of an inactivation effect of microwaves at pH 2 on pepsin molecule. Bovine serum albumin (BSA)-bromphenol blue (BPB) complex was used as substrate for the assay of pepsin by kinetic method. Depending on absorbed microwave dose, the degree of caused inactivation varies from 39.11 to 45.91% for 5 and 20 min of pepsin MW irradiation, respectively. The V _maxapp and K _mapp were calculated for low (5 min of MW irradiation) and higher specific absorbed dose (20 min of MW irradiation), as well as for untreated enzyme, from double reciprocal Lineweaver-Burk plot. The effect of microwaves on substrate (BSA-BPB complex) was also investigated. For reaction performed with MW irradiated substrate for 5 min the reaction rate was decreased for 15.15%, while for 20 min of substrate irradiation reaction rate was decreased for 25.52% compared to the control reaction. The article is published in the original.     

Influence of four different types of organophilic clay on the morphology and thermal properties of polystyrene/clay nanocomposites prepared by using the γ-ray irradiation technique

Polystyrene (PS)/clay nanocomposites were successfully prepared by the γ-ray irradiation technique. Four different types of organophilic clays were used: three of the four contained a reactive group, while the other did not. Exfoliated PS/clay nanocomposites can be obtained by using reactive organophilic clay and intercalated PS/nanocomposites can be formed by using non-reactive ones, which was confirmed by X-ray diffraction (XRD) and by transmission electron microscopy (TEM). In the formation of exfoliated PS/nanocomposites, the effect of the double bond of the clay-intercalated agents is much more important than the alkyl chain length. The enhanced thermal properties of PS/nanocomposites were characterized by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). In particular, the enhancement of the thermal properties of PS/nanocomposites made using the reactive organophilic clay was much higher than that of the thermal properties of PS/nanocomposites incorporating non-reactive clay.