Dual Template Engaged Synthesis of Hollow Ball‐in‐Tube Asymmetrical Structured Ceria

Hollow materials with different configurations are of interest due to their unique structural features, which induce interesting properties e.g. catalysis. Here, the synthesis of asymmetrical hollow ball‐in‐tube (HBT) structured CeO₂ is reported, which is achieved using a dual template engaged solid–liquid interfacial reaction. In this reaction, the SiO₂ sphere (hard template)‐embedded Ce(OH)CO₃ nanorod (sacrificial template) composite is first treated with NaOH solution, followed by an acid wash to obtain asymmetrical hollow structured CeO₂. Such HBT structured CeO₂ is demonstrated to be a good support for Au nanoparticles toward CO oxidation as compared to simple hollow CeO₂ nanotubes, leading to significantly increase catalytic activity.     

Synthesis of CdS hollow/solid nanospheres and their chain-structures by membrane technique

CdS hollow/solid nanospheres and their chain-structures were successfully synthesized through supporting liquid membrane (SLM) system with bio-membrane. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), UV–Vis spectroscopy, and photoluminescence (PL) spectroscopy have been used for the characterization of the products. The average diameters of CdS solid/hollow spheres are about 10, 40 nm, respectively. The wall of the hollow spheres is about 5 nm. CdS products are all cubic face-centered structure with the cell constant a = 5.830 Å. We also explore the morphology, structure and possible synthesis mechanism. A possible template mechanism has been proposed for the production of the hollow CdS nanocrystals, that is, CdS nanoparticles grow along the non-soakage interface between CHCl3 and reactant solution. During this process, the organic functional groups were crucial to the control of crystal morphologies.     

Study on highly visible light active Bi-doped TiO2 composite hollow sphere

Bi-doped hollow titania spheres were prepared using carbon spheres as template and Bi-doped titania nanoparticles as building blocks. The Bi-doped titania nanoparticles were synthesized at low temperature. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV-vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The effects of Bi content on the physical structure and photocatalytic activity of doped hollow titania sphere samples were investigated. Results showed that there was an optimal Bi-doped content (4%) for the photocatalytic degradation of methylene blue (MB).     

Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 hollow spheres

Nd-doped titania hollow spheres were prepared using carbon spheres as template and Nd-doped titania nanoparticles as building blocks. The Nd-doped titania nanoparticles were synthesized at low temperature. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectrum (DRS). The effects of Nd content on the physical structure and photocatalytic activities of doped titania hollow sphere samples were investigated. Results showed that there was an optimal Nd-doped content (3.9 at.%) for the photocatalytic degradation of dye X-3B (C.I. Reactive Red 2). The apparent rate constant of the best one was almost 9 times as that of P25 titania. The mechanism of photocatalytic degradation of dyes under visible light irradiation was also discussed.     

Using sonochemistry for the fabrication of hollow ZnO microspheres

Hollow ZnO microspheres assembled by nanoparticles have been prepared by a sonochemical synthesis at room temperature using carbon spheres as template. The growth process of the precursor was investigated. The prepared hollow spheres were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM). The diameter of the obtained hollow spheres is about 500 nm, and the walls are composed of numerous ZnO aggregate nanocrystallines with diameters of 90 nm. A possible growth mechanism for the formation of ZnO microspheres has been proposed, in which carbon spheres play a crucial role in the formation of the wurtzite hollow ZnO microspheres. The specific structure of the hollow spheres may find applications in nanoelectronics, nanophotonics and nanomedicine.     

复合空心立方银/金属纳米材料的制备及其SERS表征

本文用一锅法, 以立方银纳米材料为模板, 通过置换反应成功制备了空心的立方银/钯(Ag/Pd)、银/铂(Ag/Pt)和银/金(Ag/Au)纳米材料, 并将它们作为基底(以KSCN作为探针), 检测其SERS信号。     

Stable and pH-responsive core–shell nanoparticles based on HEC and PMAA networks via template copolymerization

Taking advantage of the specific hydrogen bonding interactions, stable and pH-responsive core–shell nanoparticles based on hydroxyethyl cellulose (HEC) and polymethacrylic acid (PMAA) networks, with a 〈D _h 〉 size ranging from 190 to 250 nm, can be efficiently prepared via facile one-step co-polymerization of methacrylic acid (MAA) and N,N′-methylenebisacrylamide (MBA) on HEC template in water. Using dynamic light scattering, electrophoretic light scattering, fluorescence spectrometry, thermo-gravimetric analysis, TEM, and AFM observations, the influence of crosslinker MBA as well as the reaction parameters were studied. The results show that after the introduction of crosslinker MBA, the nanoparticles became less compact; their size exhibited a smaller pH sensitivity, and their stability against pH value was improved greatly. Furthermore, the size, structure, and pH response of the nanoparticles can be adjusted via varying the reaction parameters: nanoparticles of smaller size, more compact structure, and higher swelling capacity were produced as pH value of the reaction medium increased or the HEC/MAA ratio decreased; while nanoparticles of smaller size, less compact structure and smaller swelling capacity were produced as the total feeding concentration increased.     

Template‐Free Fabrication of Hollow NiO–Carbon Hybrid Nanoparticle Aggregates with Improved Lithium Storage

Hollow NiO–carbon hybrid nanoparticle aggregates are fabricated through an environmental template‐free solvothermal alcoholysis route. Controlled hollow structure is achieved by adjusting the ratio of ethylene glycol to water and reaction time of solvothermal alcoholysis. Amorphous carbon can be loaded on the NiO nanoparticles uniformly in the solvothermal alcoholysis process, and the subsequent calcination results in the formation of hollow NiO–C hybrid nanoparticle aggregates. As anode materials for lithium‐ion batteries, it exhibits a stable reversible capacity of 622 mAh g^?1, and capacity retention keeps over 90.7% after 100 cycles at constant current density of 200 mA g^?1. The NiO–C electrode also exhibits good rate capabilities. The unique hollow structures can shorten the length of Li‐ion diffusion and offer a sufficient void space, which sufficiently alleviates the mechanical stress caused by volume change. The hybrid carbon in the particles renders the electrode having a good electronic conductivity. Here, the hollow NiO‐C hybrid electrode exhibits excellent electrochemical performance.     

Preparation and photocatalytic activity of nitrogen-doped TiO2 hollow nanospheres

TiO₂ hollow nanospheres were prepared using silicon oxide as a template. N-doped titanium oxide hollow spheres, TiO_2−xN_x were synthesized by reacting TiO₂ hollow spheres with thiourea at 500 °C. XRD and XPS data showed that oxygen was successfully substituted by nitrogen through the nitrogen-doping reaction, and finally N-doped TiO₂ hollow spheres were formed. The N-doped TiO₂ hollow spheres showed new absorption shoulder in visible light region so that they were expected to exhibit photocatalytic activity in the visible light. The photocatalytic activity of N-doped TiO₂ hollow spheres under visible light was similar to that of normal spherical TiO_2−xN_x in spite of the structural difference.     

中空结构Pt纳米粒子热稳定性和形变的分子动力学研究

不同于实心结构纳米粒子,中空结构Pt纳米粒子具有低密度、高孔隙率和大的比表面积等特点,具有特殊的物理化学性质,在催化、光电子和药物输送领域有重要的应用.纳米粒子热稳定性和形变特性对其合成、应用具有重要的影响.利用分子动力学模拟研究中空结构Pt纳米粒子结构稳定性和形变过程,对不同壳层厚度的Pt纳米粒子进行分析,结果表明:在弛豫过程,温度为0.1 K时,壳层厚度为0.5 nm的Pt纳米粒子结构将发生形变,壳层厚度为1 nm、1.5 nm、2.0 nm、2.5 nm和3 nm纳米粒子结构保持几乎不变;升温过程,中空结构Pt纳米粒子塌缩时对应的温度随着壳层厚度增加而升高;塌缩过程所经历的温度区间很窄,空心结构短时间内突变为实心结构,另外,中空结构纳米粒子塌缩后,内部原子重新排列,仍保持有序的fcc结构.     

Highly Active TiO2/Polyelectrolytes Hybrid Multilayered Hollow Nanofibrous Photocatalyst Prepared from Electrouspun Fibers Using Electrostatic Layer-by-Layer Technique

Compared to conventional film photocatalysts, fiber photocatalyst has a greater surface-to-volume ratio and a 3-D open structure that allows its surface active sites to be accessible for reactants more easily and effectively. However, TiO ₂ powder (Degussa P25), by itself, cannot be prepared in the form of fibers, but with the help of a polymer nanofiber, TiO ₂ particles can be immobilized in a fibrous network of polyelectrolyte. Here, hybrid multilayered hollow nanofibers (HMHNFs) composed of TiO ₂ /polyelectrolyte (PE) have been prepared by a combination of a electrospinning method and layer-by-layer (LBL) technology. The results show that both the average diameter and the wall thickness of the HMHNFs can be well controlled by the template, as well as the number of coating layers. The dried morphology of the obtained HMHNFs is dependent on the inner deposited numbers of the polyelectrolyte layers. When compared with other nanostructured TiO ₂ materials, such as commercial TiO ₂ nanoparticles (P25, Degussa) and TiO ₂ films, the hollow TiO ₂ /PE hybrid nanofibers exhibited higher photocatalytic activities.     

Non-equilibrium cation distribution and enhanced spin disorder in hollow CoFe2O4 nanoparticles

We present magnetic properties of hollow and solid CoFe(2)O(4) nanoparticles that were obtained by annealing of Co(33)Fe(67)/CoFe(2)O(4) (core/shell) nanoparticles. Hollow nanoparticles were polycrystalline whereas the solid nanoparticles were mostly single crystal. Electronic structure studies were performed by photoemission which revealed that particles with hollow morphology have a higher degree of inversion compared to solid nanoparticles and the bulk counterpart. Electronic structure and the magnetic measurements show that particles have uncompensated spins. Quantitative comparison of saturation magnetization (M(S )), assuming bulk Néel type spin structure with cationic distribution, calculated from quantitative XPS analysis, is presented. The thickness of uncompensated spins is calculated to be significantly large for particles with hollow morphology compared to solid nanoparticles. Both morphologies show a lack of saturation up to 7 T. Moreover magnetic irreversibility exists up to 7 T of cooling fields for the entire temperature range (10-300 K). These effects are due to the large bulk anisotropy constant of CoFe(2)O(4) which is the highest among the cubic spinel ferrites. The effect of the uncompensated spins for hollow nanoparticles was investigated by cooling the sample in large fields of up to 9 T. The magnitude of horizontal shift resulting from the unidirectional anisotropy was more than three times larger than that of solid nanoparticles. As an indication signature of uncompensated spin structure, 11% vertical shift for hollow nanoparticles is observed, whereas solid nanoparticles do not show a similar shift. Deconvolution of the hysteresis response recorded at 300 K reveals the presence of a significant paramagnetic component for particles with hollow morphology which further confirms enhanced spin disorder.     

Synthesis of hollow silica-sulfur composite nanospheres towards stable lithium-sulfur battery

Herein, porous hollow silica nanospheres were prepared via a facile sol-gel process in an inverse microemulsion, using self-assemblies of chiral amphiphile as a soft template and fine water droplets as a hard template. The shells of the hollow silica nanospheres are composed of flake-like nanoparticles with dense big holes on the surface. After covering a layer of sulfur on the silica nanospheres, followed by hydrothermal treatment in a D-glucose aqueous solution, silica-sulfur and silica-sulfur-carbon nanospheres were successfully fabricated. The silica-sulfur composites exhibit a stable capacity of 454 mAh g^?1 at current density of 335 mA g^?1 after 100 cycles with capacity retention of 85%, demonstrating a promising cathode material for rechargeable lithium-sulfur batteries. We believe that the approach for synthesis of porous hollow silica nanospheres and its carbon spheroidal shell can also be applicable for designing other electrode materials for energy storage.     

Amphiphilic polysilane-methacrylate block copolymers — Formation and interesting properties —

Several polysilane block copolymers have been prepared by the newly developed method, anionic polymerization of masked disilenes. Especially amphiphilic block copolymers of poly(1,1-dimethyl-2,2-dihexyldisilene) and poly methacrylate are focused. Poly(1,1-dimethyl-2,2-dihexyldisilene)-b-poly(2-hydroxyethyl methacrylate) (PMHS-b-PHEMA) is the first example of the amphiphilic polysilane copolymer that can form micelles in polar solvents. Poly(1,1-dimethyl-2,2-dihexyldisilene)-b-poly(methacrylic acid) (PMHS-b-PMAA) is more polar than (PMHS-b-PHEMA), soluble in water to form micelles. The cross-linking reaction of (PMHS-b-PMAA) with 1,10-diaza-4,7-dioxadecane and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride afforded the first shell cross-linked micelles (SCM) of polysilane. In addition to interesting properties, SCM is indicated to be able to form hollow sphere particles (hollow shell cross-linked micelles, HSCM) by a photochemical process. Reversible encapsulation of guest molecules by SCM and HSCM is demonstrated. Finally, SCM can be used as the template for the synthesis of metal nanoparticles, which may be used as catalysts.     

Surface Plasmon Resonance and Field Enhancement of Au/Ag Alloyed Hollow Nanoshells

We investigate the nanostructure, surface plasmon resonance （SPR） absorption and nonlinear enhancement of Au/Ag alloyed hollow nanoshells prepared by the replacement reaction of Ag nanoparticles in a HAuCI4 aqueous solution. As the volume of HAuCl4 increases from OmL to 0.S mL, the SPR band of the Au/Ag alloyed nanoshells is tuned from 430nm to 780nm, and the third-order nonlinear optical susceptibility is enhanced nearly by an order of magnitude, which indicates a large enhancement of local field in the Au/Ag alloyed hollow nanoshells with hole defects.     

Nanoscale Kirkendall Effect and Oxidation Kinetics in Copper Nanocrystals Characterized by Real‐Time,In Situ Optical Spectroscopy

The low‐temperature oxidation of ≈10 nm diameter copper nanocrystals is characterized using in situ UV–vis absorbance spectroscopy and observed to lead to hollow copper oxide shells. The kinetics of the oxidation of solid Cu nanocrystals to hollow Cu₂O nanoparticles is monitored in real‐time via the localized surface plasmon resonance response of the copper. A reaction‐diffusion model for the formation of hollow nanoparticles is fit to the measured time for complete Cu nanocrystal oxidation, and is used to quantify the diffusion coefficient of Cu in Cu₂O and the activation energy of the oxidation process. The diffusivity measured here in single‐crystalline nanoscale systems is 1–5 orders of magnitude greater than in comparable systems in the bulk, and have an Arrhenius dependence on temperature with an activation energy for diffusion of 37.5 kJ mol^?1 for 85 °C ≤ T ≤ 205 °C. These diffusion parameters are measured in some of the smallest metal systems and at the lowest oxidation temperatures yet reported, and are enabled by the unique nanoscale single‐crystalline material and the in situ characterization technique.     

TEM study on hollow and prepared from porous Cu20 nanoparticles solution phase

In this paper, hollow and porous Cu2O nanoparticles were prepared by adjusting the cationic surfactant cetyltrimethylammonium （CTAB） concentration in the solution-phase reaction. Structural investigations reveal that Cu2Onanoparticles can be either well-defined hollow nanoboxes or porous nanocubes depending on the synthesis conditions. The transmission electron microscopy （TEM） observations demonstrated that the nanoparticles in general are composed of small grains coherently growing along certain preferred orientations.     

Tin oxide nanocubes, and tin-core/tin oxide-shell nanostructures, with and without a hollow interior

A number of nanoscale tin oxide structures including 2–5 nm tin oxide hollow nanoparticles, 3–5 nm tin oxide nanocubes, 80–120 nm tin-core/tin oxide-shell nanocubes, and hollow tin oxide nanocubes, have been prepared from phenanthroline (phen)-capped Sn nanoparticles. Transmission electron microscopy revealed the existence of a hollow interior in the tin-core/tin oxide-shell nanostructures. It is believed that the low melting Sn core was hollowed out by electron beam irradiation of the sample during microscopy. The 2–5 nm tin oxide hollow nanoparticles and 80–120 nm tin oxide hollow nanocubes had thin but stable shells capable of preserving the integrity of the large cavity within.     

空心Fe_3O_4纳米微球的制备及超顺磁性

采用水热控制合成法,以六水三氯化铁、柠檬酸三钠和尿素为原料,聚丙烯酰胺为稳定剂, 200?C下反应12 h制备得到了超顺磁性空心Fe_3O_4纳米微球.通过X射线衍射仪、扫描电子显微镜、透射电子显微镜对样品的结构和形貌进行表征,并采用振动样品磁强计测试了样品的磁性能.结果表明:所得样品为具有尖晶石结构的Fe_3O_4纳米微球,尺寸为160 nm左右,呈分等级结构,即整个微球由粒径约18 nm的初级晶粒自组装堆叠而成;室温下表现为典型的超顺磁性,且饱和磁化强度为73.3 emu/g (1 emu/g=1 A·m~2/kg),这种高饱和磁化强度可以由其初级晶粒晶化程度高且粒径较大以及这种特殊的二次自组装结构进行解释.这种Fe_3O_4纳米微球为疏松多孔的空心球状结构,具有粒径分布均匀、分散性良好和超顺磁性的特点,在药物靶向输运和肿瘤热疗中有潜在的应用.     

聚(N-异丙基丙烯酰胺)模板法制备二氧化硅中空微球

以在50 oC水溶液中析出的聚(N-异丙基丙烯酰胺) (PNI-PAM)聚集体作为软模板,使正硅酸乙酯吸附在PNIPAM聚集体表面进行水解缩合,原位生成二氧化硅包裹PNIPAM的核壳结构微球;进一步冷却至室温使PNIPAM溶解在水中除去内核,从而成功合成出SiO₂中空微球．实验表明,只有在足够的PNIPAM和正硅酸乙酯含量以及正硅酸乙酯水解时间下,才能形成稳定的SiO₂中空微球．用TEM、SEM和FTIR对合成的SiO₂中空微球进行了表征,结果表明,微球尺寸为150 nm左右,并且由于PNIPAM上酰胺基团和正硅酸乙酯水解出来的硅醇间具有静电相互作用,使得SiO₂壳层上依然有PNIPAM残留.