Reaction of iodo(trimethyl)silane with <Emphasis Type="Italic">N,N</Emphasis>-dimethyl carboxylic acid amides

The reactions of iodo(trimethyl)silane with N,N-dimethylformamide and N,N-dimethylacetamide Me₂NCOR (R = H, Me) at a molar ratio of 1: 2 involved mainly cleavage of the N-C(=O) bond with formation of up to 80% of N,N-dimethyltrimethylsilylamine Me₃SiNMe₂ and the corresponding acyl iodide RCOI. In the reaction with N,N-dimethylformamide, formyl iodide HCOI was detected for the first time by gas chromatography-mass spectrometry. The contribution of Me-N bond cleavage, leading to N-methyl-N-trimethylsilyl derivative Me(Me₃Si)NCOR and methyl iodide was considerably smaller. Another by-product was the corresponding N-methyl imide MeN(COR)₂ formed by reaction of the initial amide with acyl iodide. The primary intermediate in the reaction of iodo(trimethyl)silane with DMF and DMA is quaternary ammonium salt [Me₂(Me₃Si)N⁺COR] I⁻ which decomposes via dissociation of the N-CO and N-Me bonds.     

The reactivity of ketyl and alkyl radicals in reactions with carbonyl compounds

A parabolic model of bimolecular radical reactions was used for analysis of the hydrogen transfer reactions of ketyl radicals: >C·OH+R¹COR²→>C=O+R¹R²C·OH. The parameters describing the reactivity of the reagents were calculated from the experimental data. The parameters that characterize the reactions of ketyl and alkyl radicals as hydrogen donors with olefins and with carbonyl compounds were obtained: >C·OH+R¹CH=CH₂→>C=O+R¹C·HCH₃; >R¹CH=CH₂+R²C·HCH₂R³→R²C·HCH₃+R²CH=CHR³. These parameters were used to calculate the activation energies of these transformations. The kinetic parameters of reactions of hydrogen abstraction by free radicals and molecules (adelhydes, ketones, and quinones) from the C−H and O−H bonds were compared. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2178–2184, November, 1998.     

Novel Three-Dimensional Coordination Polymers Based on [Mo6Se8(CN)6]7− Anions and Mn2+ Cations

Three novel coordination polymers K₅[MnMo₆Se₈(CN)₆] · 8H₂O (1), (Me₄N)₄[{Mn(H₂O)₂}_1.5Mo₆Se₈(CN)₆] · 4H₂O (2), and K₃[{Mn₂(H₂O)₄}Mo₆Se₈(CN)₆] · 7H₂O (3) have been synthesized by layering of a methanol solution of [Mn(salen)]CH₃COO (salen–N,N′-bis(salicylidene)ethylenediamine) on an aqueous solution of K₇[Mo₆Se₈(CN)₆] · 8H₂O. The compounds have been characterized by single-crystal X-ray diffraction analysis. All structures are based on negatively charged porous polymer frameworks where CN groups of [Mo₆Se₈(CN)₆]⁷⁻ cluster complexes are coordinated to Mn²⁺ cations. Cavities in the frameworks are filled by additional cations and solvate water molecules.     

Structure and magnetostructural correlation of ferrimagnetic meso-tetraphenylporphinatomanganese(III) dimethyl-N,N′-dicyanoquinone diiminide, [MnTPP]+[Me2DCNQI]·?

The structure [MnⅢ TPP][Me2 DCNQI] (TPP = tetraphenylporphinato; Me 2 DCNQI = 2,5-dimethyl-N,N′-dicyanoquinonediimine) has been determined from X-ray powder diffraction data. The nonsolvated structure is composed of linear (1-D) chains of alternating [MnⅢ TPP] + and μ-[Me 2 DCNQI] with intrachain Mn···Mn separations of 12.83 , and a Mn N DCNQI distance of 2.18. The dihedral angle between the mean Mn(N 4 ) TPP and [Me 2 DCNQI].- planes, and the Mn (N C) DCNQI angle are 84.18° and 143.6°, respectively. [MnⅢ TPP][Me 2 DCNQI] has a T c of 4.3 K from the 10 Hz χ"(T) data, 2-K coercivity of 5,600 Oe, and 6,300 emuOe/mol remnant magnetization that are reduced from that observed for related materials, and their inclusion extends the magnetostructural correlation between the intrachain coupling and both the dihedral angle between the mean Mn(N 4 ) TPP and [TCNE]*- (TCNE = tetracyanoethylene) planes and Mn (N C) TCNE angles. This is in accord with the intrachain coupling arising from the overlap of the MnⅢ d z 2 -like singly occupied molecular orbital (SOMO) and the z component of the [TCNE]*-π* (πz *) SOMO, which increases with decreasing dihedral angle between the mean Mn(N 4 ) TPP and [TCNE]*- planes and Mn (N C) TCNE angle.     

A dipole moment study of n-trimethyl-ammoniobenzamidates and n-benzoyliminodimethylsulphur(iv)

Analysis of the dipole moments of N-trimethylammoniobenzamidates Me₃N⁺-N^?COC₆H₄X, with X = H, p-F, p-Cl or p-NO₂, and of N-aroyliminodimethylsulphur(IV) Me₂SNCOC₆H₄X (X = H and p-NO₂) shows that, as solutes, these compounds exist in the syn conformation. Models are proposed for N-trimethylammonio-orthochloroben-zamidate and N-orthocyanobenzoyliminodimethylsulphur(IV). The (Me₃N⁺-N^t-) and (SN) dipole moments, and the (N-CO) and (SN-CO) mesomeric moments, are derived and discussed.     

Si-Containing Amides of Phosphoric Acid

The first representative of the N-silylmethylamides of phosphoric acid O=P[NMe(CH₂SiMe _n (OEt)_3-n ]₃ have been synthesized by interaction of MeNHCH₂SiMe _n (OEt)_3-n (n = 2, 3) with POCl₃. The interaction of the N,N′,N″-trimethyl-N,N′,N″-tris[(ethoxydimethyl- silyl)methyl]triamide phosphoric acid with BF₃·Et₂O or BCl₃ results in the formation of the N,N′,N″-trimethyl-N,N′,N″-tris[(fluorodimethyl-silyl)methyl]triamide phosphoric acid or N,N′,N″-trimethyl-N,N′,N″-tris[(chlorodimethylsilyl)methyl]triamide phosphoric acid. NMR data show on the tetracoordinate state of silicon in these products.     

Si-Containing Amides of Phosphoric Acid

Summary. The first representative of the N-silylmethylamides of phosphoric acid O=P[NMe(CH₂SiMe _n (OEt)_3-n ]₃ have been synthesized by interaction of MeNHCH₂SiMe _n (OEt)_3-n (n = 2, 3) with POCl₃. The interaction of the N,N′,N″-trimethyl-N,N′,N″-tris[(ethoxydimethyl- silyl)methyl]triamide phosphoric acid with BF₃·Et₂O or BCl₃ results in the formation of the N,N′,N″-trimethyl-N,N′,N″-tris[(fluorodimethyl-silyl)methyl]triamide phosphoric acid or N,N′,N″-trimethyl-N,N′,N″-tris[(chlorodimethylsilyl)methyl]triamide phosphoric acid. NMR data show on the tetracoordinate state of silicon in these products. Professor Vadim Aleksandrovich Pestunovich, our chief, teacher and friend died on July 4^th, 2004     

A Copper-Based Reverse ATRP Process for the Living Radical Polymerization of 4-Vinylpyridine: Discussion on Optimum Reaction Conditions

In this original experiment, reverse atom transfer radical polymerization technique using CuCl₂/hexamethyl tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as catalyst complex was applied to living radical polymerization of 4-vinylpyridine (4VP) with azobisisobutyronitrile (AIBN) as initiator. N,N-Dimethylformamide was used as solvent to improve the solubility of the reaction system. The polymerization not only showed the best control of molecular weight and its distribution, but also provided a rather rapid reaction rate with the molar ratio of [4VP]:[AIBN]:[CuCl₂]:[Me₆-TREN] = 400:1:2:2. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 51.5 kJ· mol¹. Use of Cl as the halogen in copper halide had many advantages over the use of Br. The resulting poly(4-vinylpyridine) was successfully used as the macroinitiator to proceed the block polymerization of styrene in the presence of CuCl/Me₆-TREN catalyst complex via a conventional ATRP process in DMF.     

Experimental Evidence for a Calix[4]arene-Proton Complex

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium H⁺(aq) + 1 ·Na⁺(nb) ⇆ 1 ·H⁺(nb) + Na⁺(aq) taking place in the two-phase water-nitrobenzene system (1 = p-tert-butylcalix[4]arene-tetrakis(N, N-diethylacetamide); aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex(H⁺, 1 ·Na⁺) = −1.4 ± 0.1. Further, the stability constant of the p-tert-butylcalix[4]arene-tetrakis(N,N-diethylacetamide)-H⁺ complex in water saturated nitrobenzene was calculated for a temperature of 25°C as log β_nb(1 · H⁺) = 8.1 ± 0.1.     

Experimental Evidence for a Calix[4]arene-Proton Complex

Summary. From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium H⁺(aq) + 1 ·Na⁺(nb) ⇆ 1 ·H⁺(nb) + Na⁺(aq) taking place in the two-phase water-nitrobenzene system (1 = p-tert-butylcalix[4]arene-tetrakis(N, N-diethylacetamide); aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex(H⁺, 1 ·Na⁺) = −1.4 ± 0.1. Further, the stability constant of the p-tert-butylcalix[4]arene-tetrakis(N,N-diethylacetamide)-H⁺ complex in water saturated nitrobenzene was calculated for a temperature of 25°C as log β_nb(1 · H⁺) = 8.1 ± 0.1.     

Darstellung,Charakterisierung und Reaktionsverhalten von Natrium‐ und Kaliumhydridosilylamiden R2(H)Si—N(M)R′ (M = Na,K) — Kristallstruktur von [(Me3C)2(H)Si—N(K)SiMe3]2·THF

Preparation, Characterization and Reaction Behaviour of Sodium and Potassium Hydridosilylamides R₂(H)Si—N(M)R′ (M = Na, K) — Crystal Structure of [(Me₃C)₂(H)Si—N(K)SiMe₃]₂ · THF The alkali metal hydridosilylamides R₂(H)Si—N(M)R′ 1a‐Na — 1d—Na and 1a‐K — 1d‐K ( a : R = Me, R′ = CMe₃; b : R = Me, R′ = SiMe₃; c : R = Me, R′ = Si(H)Me₂; d : R = CMe₃, R′= SiMe₃) have been prepared by reaction of the corresponding hydridosilylamines 1a — 1d with alkali metal M (M = Na, K) in presence of styrene or with alkali metal hydrides MH (M = Na, K). With NaNH₂ in toluene Me₂(H)Si—NHCMe₃ ( 1a ) reacted not under metalation but under nucleophilic substitution of the H(Si) atom to give Me₂(NaNH)Si—NHCMe₃ ( 5 ). In the reaction of Me₂(H)Si—NHSiMe₃ ( 1b ) with NaNH₂ intoluene a mixture of Me₂(NaNH)Si—NHSiMe₃ and Me₂(H)Si—N(Na)SiMe₃ ( 1b‐Na ) was obtained. The hydridosilylamides have been characterized spectroscopically. The spectroscopic data of these amides and of the corresponding lithium derivatives are discussed. The ²⁹Si‐NMR‐chemical shifts and the ²⁹Si—¹H coupling constants of homologous alkali metal hydridosilylamides R₂(H)Si—N(M)R′ (M = Li, Na, K) are depending on the alkali metal. With increasing of the ionic character of the M—N bond M = K > Na > Li the ²⁹Si‐NMR‐signals are shifted upfield and the ²⁹Si—¹H coupling constants except for compounds (Me₃C)(H)Si—N(M)SiMe₃ are decreased. The reaction behaviour of the amides 1a‐Na — 1c‐Na and 1a‐K — 1c‐K was investigated toward chlorotrimethylsilane in tetrahydrofuran (THF) and in n‐pentane. In THF the amides produced just like the analogous lithium amides the corresponding N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2a — 2c ) in high yields. The reaction of the sodium amides with chlorotrimethylsilane in nonpolar solvent n‐pentane produced from 1a‐Na the cyclodisilazane [Me₂Si—NCMe₃]₂ ( 8a ), from 1b‐Na and 1‐Na mixtures of cyclodisilazane [Me₂Si—NR′]₂ ( 8b , 8c ) and N‐silylation product 2b , 2c . In contrast to 1b‐Na and 1c‐Na and to the analogous lithium amides the reaction of 1b‐K and 1c‐K with chlorotrimethylsilane afforded the N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2b , 2c ) in high yields. The amide [(Me₃C)₂(H)Si—N(K)SiMe₃]₂·THF ( 9 ) crystallizes in the space group C2/c with Z = 4. The central part of the molecule is a planar four‐membered K₂N₂ ring. One potassium atom is coordinated by two nitrogen atoms and the other one by two nitrogen atoms and one oxygen atom. Furthermore K···H(Si) and K···CH₃ contacts exist in 9 . The K—N distances in the K₂N₂ ring differ marginally.     

N-(1-亚氨基乙基)乙脒铂配合物合成、结构和性质

四氯合铂酸钾分别与邻、间、对磺基苯甲酸在乙腈和水中利用水热合成获得了3个铂的N-(1-亚氨基乙基)乙脒配合物:[Pt(NIA)_2]·(2-sb)·2H_2O(1),[Pt(NIA)_2]·(3-sb)·3H_2O(2)和[Pt(NIA)_2]·(1,4-dsb)·2H_2O(3)(NIA=N-(1-亚氨基乙基)乙脒,2-sb~2-=2-磺基苯甲酸二价阴离子、3-sb~2-=3-磺基苯甲酸二价阴离子、1,4-dsb~2-=1,4-二磺基苯二价阴离子)。合成过程中发生了乙氰三聚以及4-sb~2-转变为1,4-dsb~2-的反应。对配合物进行了元素分析、红外、紫外、荧光、热重和粉末X射线衍射表征,并利用单晶X射线衍射测定了配合物的晶体结构。3个配合物为阳离子-阴离子物种,阳离子为[Pt(NIA)_2]~(2+),中心金属离子四配位平面构型;阴离子与阳离子、水形成氢键,组成一个三维网络结构,但3个配合物的氢键模式不同。配合物在热稳定性、荧光性质上有一定差异。     

Redox chemistry of [Fe2(CN)10]4−. Part I. Reaction with iodide

The iron(III) dimeric complex [Fe₂(CN)₁₀]⁴⁻ is reduced to the iron(III)iron(II) species [Fe₂(CN)₁₀]⁵⁻ by iodide ion, the equilibrium constant being strongly dependent upon the nature of the alkali metal cation, reduction being favoured in the sequence: Cs⁺>NH ₄ ⁺ ≥K⁺>Na⁺>Li⁺. The reaction kinetics are autocatalytic in character, the catalytic species being the mixed valence dimer. The rates of reactions are also strongly catalysed by alkali metal cations, in the same sequence as for the equilibrium constants. The reaction mechanism involves the formation of I ₂ ⁻ as a reactive intermediate which can be oxidised by both [Fe₂(CN)₁₀]⁴⁻ and [Fe₂(CN)₁₀]⁵⁻.     

Kinetics and mechanism of dehydration of kaolinite,muscovite and talc analyzed thermogravimetrically by the third-law method

Summary The third-law method has been applied to determine the enthalpies, Δ_rH_T⁰, for dehydration reactions of kaolinite, muscovite and talc. The Δ_rH_T⁰values measured in the equimolar (in high vacuum) and isobaric (in the presence of water vapour) modes (980±15, 3710±39 and 2793±34 kJ mol^-1, for kaolinite, muscovite and talc, respectively) practically coincide if to take into account the strong self-cooling effect in vacuum. This fact strongly supports the mechanism of dissociative evaporation of these compounds in accordance with the reactions (primary stages): Al₂O₃·2SiO₂·2H₂O(s)→Al₂O₃(g)↓+2SiO₂(g)↓+2H₂O(g); K₂O·3Al₂O₃·6SiO₂·2H₂O(s) →K₂O(g)↓+3Al₂O₃(g)↓+6SiO₂(g)↓+2H₂O(g) and 3MgO·4SiO₂·H₂O(s) →3MgO(g)↓+4SiO₂(g)↓+H₂O(g). The values of the Eparameter deduced from these data for equimolar and isobaric modes of dehydration are as follows: 196 and 327 kJ mol^-1for kaolinite, 309 and 371 kJ mol^-1for muscovite and 349 and 399 kJ mol^-1for talc. These values are in agreement with quite a few early results reported in the literature in 1960s.     

Quantum-chemical investigation of the mechanisms of oxidation of dimethyl sulfide by hydrogen peroxide and peroxoborates

It was established by the DFT method in the B3LYP/6-311G-d,p approximation that the oxidation of dimethyl sulfide (Me₂S) by peroxides (XOOH) can take place by two mechanisms depending on the nature of X. In the reaction of Me₂S with hydrogen peroxide (X = H) the direct reagent is the HOOH molecule while in the reactions with monoperoxoborate [X = B(OH)₃] and diperoxoborate [X = B(OH)₂OOH] it is a reagent containing the “water oxide” fragment X—(⁺OH)—O^–.     

Studies on a New Binuclear Tungsten(IV)-pterin Complex Showing Reactivity Towards Trimethylamine <Emphasis Type="Italic">N</Emphasis>-oxide

The new compound [W₂^IVOCl₂L₂] · DMF (2) has been synthesized by a redox reaction between WOCl₄ and 2-pivaloylamino-6-acetonylisoxanthopterin (H₂L, 1) in DMF medium. It bas been characterized by elemental analysis, spectroscopy and electrochemistry. Its reactivity towards Me₃N → O has been followed both kinetically and stoichiometrically. The reaction follows substrate saturation kinetics and a large negative entropy of activation value points towards involvement of an associative mechanism. ¹H-n.m.r. and c.v. data throw light on the role of a redox ‘non-innocent’ pterin ligand (1), in conferring reducing properties on the W(IV) atoms of (2).     

Composition,structure, and ir spectra of acid trialkylmethylammonium acetates in CCl4+HAc solutions

The composition and structure of neutral and acid trialkyl(C₈-C₁₀)methylammonium acetates in CCl₄+HAc solutions formed by the reaction R₃CH₃N⁺Ac⁻+nHAc⇔R₃CH₃N⁺(Ac·nAc)⁻ are investigated by IR spectroscopy. As the molar ratio HAc/R₃CH₃N⁺Ac⁻ increases in solutions, complex anions Ac·nAc⁻ (I) with n=1, 2, 3, 4 are formed in sequence. The curves of formation of anions with n=0, 1, 2 are plotted. One terminal COO group of anions I is bonded to (“blocked” by) the R₃CH₃N⁺ cation, and another group sequentially adds H-bonded HAc molecules as the concentration of HAc in solutions increases. The sequence of IR spectral changes in the series of anions I with n=0, 1, 2, 3, 4 is discussed. Institute of Catalysis, Siberian Branch, Russian Academy of Sciences. Novosibirsk State University. Translated fromZhurnal Strukturnoi Khimii, Vol. 37, No. 2, pp. 310–318, March–April, 1996. Translated by L. Smolina     

Study of reactions of some halides, cyclopentadienyl dichlorides, and bis(cyclopentadienyl) chlorides of lanthanides withtrans-stilbene adducts with alkali metals [PhCHCHPh]·−M+ (M=Li, Na)

Reaction of Sml₂(THF)₂ with metallic lithium andtrans-stilbene in 1:2:2 ratio in DME gives the stilbene complex of divalent samarium (PhCHCHPh)Sm(DME)₂. This complex reacts with hydrogen in THF to give SmH₂(THF)₂ and 1,2-diphenylethane. The reaction with (Me₃Si)₂NH gives the amide [(Me₃Si)₂N]₂Sm(DME)₂ and the reaction with triphenylgermane yields Ph₃GeGePh₃. Reaction of CpLuCl₂(THF)₂ with 2 equivalents of [PhCHCHPh]·⁻Na⁺ in DME results in the dimerization of stilbene fragments to give anate-complex {Cp₂Lu[μ-CH (Ph)CH(Ph)CH(Ph)CH(Ph)]}Na(DME)₃. In the reaction of Cp₂GdCl with [PhCHCHPh]·⁻Na⁺, the known complex Cp₃Gd(THF) was isolated as the only lanthanidecontaining product. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1442–1446, August, 2000.     

Experimental and Theoretical Studies on the Characteristics of Atmospheric Pressure Glow Discharge with Liquid Cathode

This study investigated the characteristics of an atmospheric pressure air-glow discharge with a liquid cathode. Distilled water was utilized as the cathode. The electric field strength, gas temperature as well as the emission intensity of some N₂(C³Π_u → B³Π_g) and OH (A²Σ⁺ → X²Π) bands were measured at a discharge current ranging from 15 to 50 mA. Based upon the data obtained, the reduced electric field strength, E/N, and effective vibrational temperatures for N₂(C³Π_u, X¹Σ _g ⁺ ) and OH (A²Σ⁺) were examined. The electron energy distribution function (EEDF) and some electron parameters (average energy, electron density and rate coefficients) were obtained based on a numerical solution of the Boltzmann kinetic equation. The result showed that the EEDF was not in equilibrium and the effective vibrational temperatures for N₂(C³Π_u, X¹Σ _g ⁺ ) were essentially higher than the gas temperatures.     

Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti<Superscript>+</Superscript> and C<Subscript>2</Subscript>H<Subscript>4</Subscript>

The mechanism of the spin-forbidden reaction Ti⁺(⁴F, 3d²4s¹) + C₂H₄→TiC₂H₂ ⁺ (²A₂) + H₂ on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm⁻¹ in the intermediate complex IM1-⁴B₂. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1-²A₁, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two distinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC₂H₂ ⁺(²A₂) + H₂ products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti⁺+C₂H₄→⁴IC→IM1-⁴B₂→^4,2ISC→IM1-²A₁→[²TS_ins]→IM2→[²TS_MCTS]→IM5→TiC₂H₂ ⁺(²A₂)+H₂. Supported by ‘Qinglan’ Talent Engineering Funds by Tianshui Normal University.