有机锗倍半氧化物的快原子轰击质谱分析

在不同的水解条件下，合成羧乙基锗倍半氧化物（Ｇｅ－１３２）和乙氧羰基乙基锗倍半氧化物。采用快原子轰击质谱（ＦＡＢＭＳ）技术分别对３种化合物进行分析，证明有机锗化合物是以聚合物的形式存在，分子结构通式为｛［ＧｅＣＨ２ＣＨ２ＣＯＯＨ］２Ｏ３｝ｎ，聚合系数ｎ分别为１、２和３。     

β—羧乙基锗倍半氧化物中无机锗的示波极谱法测定

β-羧乙基锗倍半氧化物(Ge-132)因其有增强人体免疫功能和抗衰老等作用而被用于食品添加剂和某些化妆品中。在合成过程中若处理不当则会有较高含量的无机锗存在。无机锗对人体有毒害作用,故合成产品中无机锗的含量是衡量产品质量优劣的重要指标。若采用苯芴酮吸光光度法测定无机锗,有机锗有干扰。需萃取分离后测定,手续较繁。我们通过试验发现,β-羧乙基锗倍半氧化物在草酸-苏木精-V(Ⅳ)体系中示波极谱法测定无机锗时不产生干扰,无需分离有机锗。方法快速、简便。     

二羧乙基锗倍半氧化物中二氧化锗的锆共沉－比色测定法

用氢氧化锆共沉－比色法测定二羧乙基锗倍半氧化物中二氧化锗的含量，先将锗与氢氧化锆共沉，沉淀用盐酸溶解，再用四氯化碳萃取盐酸溶液中锗，锗用苯芴酮比色法在５１０ｎｍ处测定。结果表明，锗在１０－６～１０－５ｍｏｌ／Ｌ范围内吸收度与浓度呈线性关系，回收率为９８％～１０３％，变异系数小于５％，该法可用于原料及制剂中二氧化锗的分析。     

二羧乙基锗倍半氧化物中二氧化锗的锆共沉—比色测定法

用氢氧化锆共沉－比色法测定二羧乙基锗倍半氧化物的二氧化锗的含量，先将锗与氢氧化锆共沉，沉淀用盐酸溶解，再用四氯化碳萃取盐酸溶液中锗，锗用苯芴酮比色法在５１０ｎｍ，处测定。结果表明，锗在１０＾－６－１０＾－５ｍｏｌ／Ｌ范围同吸收率与浓度呈线性关系，回收率为９８％－１０３％，变异系数小于５％，该法可用于原料及制占二氧化锗的分析。     

β-羧乙基(或α-甲基乙基)锗三氯化物晶体和分子结构及其质谱分析

有机锗化合物的抗癌等广泛生物活性已引起人们对其研究的兴趣。β-羰乙基锗倍半氧化物(Ge-132)的生物活性已有广泛研究,对其衍生物合成及性质研究亦受到重视。作为合成这类衍生物的中间体,β-羧烃基锗三氯化物的结构和性质报道较少。我们制备了两种β-羧烷基锗三氯化物晶体,测定了其晶体和分子结构,研究了质谱裂解机理,讨论了结构和性质问的关系。     

β—（酚酯基）乙基锗倍半氧化物的合成及对体外培养细胞的作用

β-羧基乙基锗倍半氧化物(即Ge-132)是一种无毒和具较强抗癌活性的有机锗化合物。为了进一步提高其抗癌活性。已对Ge-132进行了化学结构修饰。本文介绍8种未见报导的Ge-132衍生物,β-酚酯基乙基锗倍半氧化物的合成和体外培养细胞实验结果。     

荧光法研究Ge—132对苯丙氨酸Maillard反应的抑制作用

哺乳动物体内氨基酸及蛋白质的非酶糖化反应（Ｍａｉｌａｒｄ反应）与糖尿病及其并发症的关系已引起广泛关注［１］，β－羧乙基锗倍半氧化物（Ｇｅ－１３２）具有预防糖尿病和调节糖代谢的作用［２］，研究Ｇｅ－１３２对Ｍａｉｌａｒｄ反应的抑制作用对于开发防治糖尿病...     

荧光法研究Ge-132对牛血清白蛋白Maillard反应的抑制作用

人体内氨基酸及蛋白质的非酶糖化反应(Maillard反应)与糖尿病及其并发症的关系已经引起广泛注意[1].有机锗化合物β-羧乙基锗倍半氧化物(Ge-132)具有预防糖尿病及调节糖代谢的作用[2].     

有机锗与铅

有机锗是指分子中含有Gr-C键的锗化合物,到目前为止已经合成的有机锗约有数千种。但这里所讲的有机锗专指羧乙基锗倍半氧化物,它是由日本学者浅井一彦于20世纪60年代首先合成的,70年代日本另一位学者石川明用大同小异的方法合成了另一种聚合状态稍有不同的化合物。浅井一彦合成的有机锗叫Repagermanium,化学式为:[(GeCH_2CH_2COOH)_2O_3]_n,代号为Ge-132。石川明合成的化合物叫Propagermanium,化学式为[(O_(1/2))_3GeCH_2CH_2COOH]_n,代号为SK818。实际上,Ge-132和SK818都是羧乙基锗倍半氧化物的聚合物,它们的分子式     

离子色谱-电感耦合等离子体质谱测定保健品中无机锗和锗-132

建立了离子色谱-电感耦合等离子体质谱法( IC-ICP-MS)测定液体保健品中无机锗和β-羧乙基锗倍半氧化物(锗-132)的方法,对液体或可溶于水的样品可以直接或稀释后进样.硒元素可能会带来干扰,可以选择72Ge作为定量同位素来避免.方法中无机锗和锗-132的定量限均为1.0μg/L,RSD均小于4.4％.对实际样品进行加标,无机锗回收率为91％～92％,锗-132回收率为104％～107％.样品的测定结果和湿法消解-电感耦合等离子体质谱检测出的结果相吻合.     

A Coulometric Analysis Method and an Ion-exclusion Chromatographic Method for the Determination of Antimony(V) in Large Excess of Antimony(III)

A coulometric analysis method and an ion-exclusion chromatographic method were developed for the determination of antimony(V) in a large excess of antimony(III). Antimony(V) reacted with potassium iodide in a high concentration hydrochloric acid; the liberated iodine was determined by the standard-addition method using coulometrically generated iodine. Using a Dionex ICE-AS1 ion-exclusion column, antimony(V) was eluted with 40 mmol/L sulfuric acid; on the other hand, antimony(III) was strongly retained on the column. The content, expressed as the amount ratio of antimony(V) to antimony(III), was 0.035% in a 10 g/kg antimony(III) solution prepared from an antimony(III) oxide reagent by the coulometric analysis method and 0.036% in a 1 g/kg antimony(III) solution prepared from the same antimony(III) oxide by the ion-exclusion chromatographic method. The results of both methods were in good agreement with each other. The detection limit of antimony(V) in antimony(III) oxide by the former method was 0.004% of antimony(III), and that by the latter method was 0.002% of antimony(III).     

离子色谱柱后补液-积分脉冲安培法检测阿立哌唑中三乙胺残留

采用离子色谱柱后补液-积分脉冲安培法建立了测定阿立哌唑原料药中三乙胺残留量的新方法。色谱柱为Dionex IonPac CS17(4 mm×250 mm),保护柱为Dionex IonPac CG17(4 mm×50 mm)。对淋洗液的浓度、检测电位和柱后补液流速进行了优化选择,确定淋洗液为30 mmol/L甲烷磺酸,流速为1.0 mL/min;柱后补液为500 mmol/L NaOH溶液,流速为0.2 mL/min;检测电位为氨基酸电位。结果表明,三乙胺在0.1315~1.315 mg/L范围内线性关系良好(R2=0.9994),加标回收率在101.7%~105.9%之间,相对标准偏差(RSD)为1.9%,建立的方法适用于阿立哌唑原料药中三乙胺的残留量测定。     

Preparative isolation and purification of flavone compounds from sophora japonica L. by high-speed counter-current chromatography combined with macroporous resin column separation

High-speed counter-current chromatography combined with macroporous resin column separation was applied to the isolation and purification of genistein-7,4'-di-O-beta-D-glucoside (I), genistein-7-O-beta-D-glucopyranoside-4'-O-[(alpha-L-rhamnopyransoyl)-(1-2)-beta-D-glucopyranoside] (II), kaempferol-3-O-beta-D-sophoroside(III), quercetin-3-O-beta-L-ramnopyranosyl-(1 - 6)-beta-D-glucopyranoside (IV), genistein-4'-beta-L-rhamnopyransoyl-(1 - 2)-alpha-D-glucopyranoside (V), and kaempferol-3-O-beta-L-ramnopyranosyl-(1 - 6)-beta-D-glucopyranoside (VI) from the Chinese medicinal herb Sophora japonica L. The crude extracts from the pericarps of Sophora japonica L. were pre-separated on a D-101 macroporous resin column and divided into two parts as sample 1 and sample 2. An 80-mg portion of sample 1 was separated by using n-butanol-acetic acid (1%) (5:5, v/v) as the two-phase solvent system and yielded 30.1 mg of compound I, 23.3 mg of compound II. A 120 mg portion of sample 2 was separated by using ethyl acetate-n-butanol-acetic acid (1%) (5:0.8:5, v/v) as the two-phase solvent system and yielded 5.5 mg of compound III, 31.7 mg of compound IV, 37.4 mg of compound V, and 6.2 mg of compound VI. The purities of compounds I, II, III, IV, V, and VI were 98.7, 98.2, 97.8, 98.5, 99.3, and 98.9%, respectively, as determined by HPLC. The chemical structures of these components were identified by 1H-NMR and 13C-NMR.     

Improved recovery of trace amounts of gold (III), palladium (II) and platinum (IV) from large amounts of associated base metals using anion-exchange resins

The adsorption and desorption behaviors of gold (III), palladium (II) and platinum (IV) were surveyed in column chromatographic systems consisting of one of the conventional anion-exchange resins of large ion-exchange capacity and dilute thiourea solutions. The noble metals were strongly adsorbed on the anion-exchange resins from dilute hydrochloric acid, while most base metals did not show any marked adsorbability. These facts made it possible to separate the noble metals from a large quantity of base metals such as Ag (I), Al (III), Co (II), Cu (II), ¶Fe (III), Mn (II), Ni (II), Pb (II), and Zn (II). Although it used to be very difficult to desorb the noble metals from the resins used, the difficulty was easily overcome by use of dilute thiourea solutions as an eluant. In the present study, as little as 1.00 μg of the respective noble metals was quantitatively separated and recovered from as much as ca. 10 mg of a number of metals on a small column by elution with a small amount of dilute thiourea solution. The present systems should be applicable to the separation, concentration and recovery of traces of the noble metals from a number of base metals coexisting in a more extended range of amounts and ratios.     

Identification of homemade inorganic explosives by ion chromatographic analysis of post-blast residues

Anions and cations of interest for the post-blast identification of homemade inorganic explosives were separated and detected by ion chromatographic (IC) methods. The ionic analytes used for identification of explosives in this study comprised 18 anions (acetate, benzoate, bromate, carbonate, chlorate, chloride, chlorite, chromate, cyanate, fluoride, formate, nitrate, nitrite, perchlorate, phosphate, sulfate, thiocyanate and thiosulfate) and 12 cations (ammonium, barium(II), calcium(II), chromium(III), ethylammonium, magnesium(II), manganese(II), methylammonium, potassium(I), sodium(I), strontium(II), and zinc(II)). Two IC separations are presented, using suppressed IC on a Dionex AS20 column with potassium hydroxide as eluent for anions, and non-suppressed IC for cations using a Dionex SCS 1 column with oxalic acid/acetonitrile as eluent. Conductivity detection was used in both cases. Detection limits for anions were in the range 2-27.4ppb, and for cations were in the range 13-115ppb. These methods allowed the explosive residue ions to be identified and separated from background ions likely to be present in the environment. Linearity (over a calibration range of 0.05-50ppm) was evaluated for both methods, with r(2) values ranging from 0.9889 to 1.000. Reproducibility over 10 consecutive injections of a 5ppm standard ranged from 0.01 to 0.22% relative standard deviation (RSD) for retention time and 0.29 to 2.16%RSD for peak area. The anion and cation separations were performed simultaneously by using two Dionex ICS-2000 chromatographs served by a single autoinjector. The efficacy of the developed methods was demonstrated by analysis of residue samples taken from witness plates and soils collected following the controlled detonation of a series of different inorganic homemade explosives. The results obtained were also confirmed by parallel analysis of the same samples by capillary electrophoresis (CE) with excellent agreement being obtained.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Simultaneous separation and determination of thallium in water samples by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry

An analytical method for separation and determination of thallium species in water using high‐performance liquid chromatography with inductively coupled plasma mass spectrometry was developed. The composition and concentration of mobile phase, injection volume, and pH value were optimized respectively with an anion or cation exchange column. The results showed that Tl(I) and Tl(III) were effectively separated using anion exchange column Hamilton PRP‐X100, with the mobile phase consisting of 200 mmol/L ammonium acetate and 10 mmol/L diethylenetriaminepentaacetic acid (pH = 4.2). When using a Dionex cation exchange guard column, CS12A, 15 mmol/L HNO₃, and 3 mmol/L diethylenetriaminepentaacetic acid as the mobile phase, Tl(I) and Tl(III) could be effectively separated. The detection limits of the methods were 3–6 and 9–12 ng/L, respectively. In a solution containing Fe ions and oxalic acid, a significant quantity of Tl(I) was oxidized. Fe ions and oxalic acid in the water samples did not interfere with high‐performance liquid chromatography‐inductively coupled plasma mass spectrometry measurement results.     

离子色谱法检验尸体心血中草甘膦

建立了离子色谱检测人血中草甘膦的方法。血液样品使用乙腈沉淀蛋白质,离心后取上清液过Dionex OnGuard II RP 柱和Dionex OnGuard IIAg柱后,经IonPac AS-19阴离子色谱柱(25 mm×4 mm)分离,用KOH淋洗液自动发生器(EG)进行梯度淋洗,抑制器采用外加水模式,电导检测器检测。结果表明,草甘膦在10～100 mg/L范围内线性关系良好(相关系数r2=0.9999)。以信噪比(S/N)为3确定方法检出限为0.12 mg/L,以S/N=10确定方法定量限为0.39 mg/L;方法回收率为95.2%～109.1%,相对标准偏差(n=5)为1.2%～3.7%,检测实发案件中死者心血中草甘膦质量浓度为508 mg/L。该方法操作简便,结果准确,适用于血中草甘膦的定量检测,能快速为案件的侦破提供可靠的线索和依据,可满足公安工作的需要。     

紫外光降解-离子色谱法测定液晶化合物中的阴离子

 采用紫外光降解 离子色谱法测定了液晶材料中的阴离子。建立了样品前处理的方法 ,研究了样品光降解的条件及样品测定的最佳色谱参数。结果表明 ,该液晶材料样品中含有F-,Cl-,NO2 -,Br-和I-等 5种阴离子。用DionexOnGuardRP及P型前处理柱过滤可有效去除光解后样品基体中的有机物。光解时加入H2 O2 可显著提高光解效率 ,在样品基体中加入NaOH使该方法可准确测定样品中的I-。F-,Cl-,NO2 -和Br-在光解时间约为 2 0h时达到最大离解效率 ,I-在光解 1 5h时达到最大离解效率。采用DionexIonPacAS16色谱柱 ,整个样品的测定可在 2 5min内完成。     

Separation and determination of metallocyanide complexes of Fe(II), Ni(II) and Co(III) by ion-interaction chromatography with membrane suppressed conductivity detection applied to analysis of oil refinery streams (sour water)

A separation and determination method for the analysis of cyanometallic complexes of Fe(II), Ni(II) and Co(III) was developed to be applied to the analysis of petroleum refinery streams (sour water). Ion-interaction chromatography was used employing an analytical column IonPac NS1 10 microm and a chromatographic system ICS 2500 equipped with a membrane conductivity suppression ASRS ultra 4mm, both supplied by Dionex Corporation. The mobile phase was composed of 2 mmol l(-1) TBAOH, 1 mmol l(-1) Na(2)CO(3), 0.1 mol l(-1) NaCN and ACN (77:23, v/v), flowing at 0.7 ml min(-1). At the optimized conditions, detection limits estimated by the calibration curve parameters and relative standard deviation were: 0.002 mg CNl(-1) and 3.1% for Fe(CN)(6)(4-); 0.003 mg CNl(-1) and 2.5% for Ni(CN)(4)(2-) and 0.003 mg CNl(-1) and 2.8% for Co(CN)(6)(3-). Sour water samples without any pretreatment (except membrane filtration) from a petroleum refinery in Brazil were analyzed successfully by external calibration method.