Development of an HPLC method for determining the alpha 2-adrenergic receptor agonist brimonidine in blood serum and aqueous humor of the eye

A procedure for determining brimonidine [5-bromo-6-(2-imidazolidinylideneamino) quinoxaline] in biological samples using a reversed-phase isocratic HPLC method is described. The application in blood serum and eye aqueous humor of patients treated with the Alphagan ophthalmic solution was carried out by enrichment of samples in brimonidine with solid-phase liquid extraction. Brimonidine reached maximum levels in aqueous humor and serum within 2-2.5 h, whereafter a declining pattern was obtained. An approximate 50% level of brimonidine was identified in serum at 12 h after ocular administration, whereas in aqueous humor this percentage was determined after a period of 4-5 h.     

Chromatographic identification of lipids from the aqueous eye humor

An effort was undertaken to establish the TLC analytical conditions enabling separation and identification of lipids from the aqueous eye humor.     

Capillary electrophoretic analysis of cyclodextrins with dynamic fluorescence labeling and detection

The use of 8-anilinonaphthalene-1-sulfonic acid (8,1-ANS) as buffer additive in the capillary electrophoretic separation of cyclodextrins (CDs) was investigated. Better detection sensitivity was obtained for - and γ-CDs than with previously reported capillary electrophoretic methods. Increasing the concentration of 8,1-ANS improved resolution and sensitivities for -, β- and γ-CDs, while decreasing the pH of the background electrolyte can improve sensitivities. Detection limits for -, β- and γ-CDs were determined to be 60, 20 and 7 μM, respectively. The formation constants of CD–8,1-ANS complexes at pH 6 were also measured by capillary electrophoresis. Finally the specificity of amyloglucosidase to CDs was analyzed as a practical application of this method.     

Capillary electrophoretic determination of thiosulfate and its oxidation products

Capillary electrophoresis (CE) was developed for the rapid and simple determination of thiosulfate and its oxidation products such as common polythionates, sulfite and sulfate. Direct and indirect UV detection techniques were investigated. The optimized separations of UV absorbing S2O3(2-), S4O6(2-), S5O6(2-) and S6O6(2-) anions were carried out in 5 mmol l(-1) (NH4)2SO4, 5 mmol l(-1) KH2PO4 electrolyte at pH 5.0, with direct UV detection at 214 nm. All analytes were well resolved in less than 4 min. Analysis of S2O3(2-), S4O6(2-), SO4(2-) and SO3(2-) ions can be performed in 5 mmol l(-1) H2CrO4, 1 mmol l(-1) hexamethonium hydroxide electrolyte neutralized with triethanolamine to pH 8.0, using indirect UV detection at 254 nm. However, the detection sensitivity for tetrathionate was poor. Other polythionates can not be detected at all because of their high absorbance even at 254 nm. The developed CE method was applied for the monitoring of sulfur species in spent fixing solutions during the electrolytic oxidation.     

Capillary electrophoretic enantioselective determination of zopiclone and its impurities

A capillary electrophoretic enantioselective method with UV detection was developed and validated for the simultaneous quantification of zopiclone enantiomers and its impurities, zopiclone-N-oxide enantiomers, and 2-amino-5-chloropyridine, in tablets. The analytes were extracted from the tablets using ACN and were separated in an uncoated fused-silica capillary (50 μm, 42 cm effective length, 50 cm total length) using 80 mM sodium phosphate buffer pH 2.5 and 5 mM carboxymethyl-β-cyclodextrin as running buffer. The analytes and the internal standard (trimethoprim) were detected at 305 and 200 nm, respectively. A voltage of 27 kV was applied and the capillary temperature was maintained at 25°C. All enantiomers were analyzed within 8 min and linear calibration curves over the concentration range of 0.4-0.8 mg mL?1 for each zopiclone enantiomer, 0.8-1.6 μg mL?1 for 2-amino-5-chloropyridine and 0.4-0.8 μg mL?1 for each zopiclone-N-oxide enantiomer were obtained. The coefficients of correlation obtained for the linear curves were greater than 0.99. The intra-day and inter-day accuracy and precision were lower than 2% for all analytes. This validated method was employed to study the degradation and racemization of zopiclone under stress conditions. This application demonstrated the importance of a stability-indicating assay method for this drug.     

Capillary electrophoretic determination of carboxyhemoglobin concentrations in postmortem blood samples

The use of capillary electrophoresis (CE) as an alternative to existing methods of quantitation of carbon monoxide (CO) in hemoglobin from postmortem blood samples is presented. The isolation of heme (the portion of the hemoglobin molecule in which CO binding takes place) from hemoglobin is described. Reduced (containing no gas molecules) heme and CO-heme isolated from hemoglobin standards were successfully separated using CE. Heme and CO-heme were also isolated from blood samples of accident victims and analyzed using CE. A quantifiable difference in the CO-heme signals from blood samples containing fatal and nonfatal levels of CO was observed.     

Capillary electrophoretic analysis of whole blood samples for hemoglobin-based oxygen carriers without the use of immunoprecipitation

Hemoglobin-based oxygen carriers (HBOCs) are blood substitutes, synthesized by polymerizing hemoglobin, which are being developed and investigated as alternatives to blood for medical purposes. However, due to their ability to increase the oxygen carrying capacity when taken by healthy individuals, HBOCs have been used as a doping agent among endurance athletes and are included in the World Anti-Doping Agency's Prohibited List. To maintain the fairness of competitions and continue the battle against doping, it is essential to be able to detect HBOCs if present in an athlete's blood. To achieve this goal, it is necessary to differentiate HBOCs from the native hemoglobin and to do so in a cost and time effective manner. We have developed a rapid capillary zone electrophoresis (CZE), UV absorbance, method capable of detecting HBOCs, in whole blood samples, at levels below those considered necessary to provide a performance enhancement. Our approach to the analysis for HBOCs utilizes the whole blood sample, not just the plasma, and does not require the use of immunoprecipitants to ensure accurate analysis. By lysing the red blood cells and using centrifugal filtration, followed by our CZE separation, we are able to effectively distinguish between native hemoglobin and HBOCs. Through this method, we have been able to reliably detect concentrations of HBOCs at the equivalent of 5.5 g/L, the equivalent to a 3.5% increase in blood hemoglobin concentration for an athlete.     

Capillary electrophoretic analysis of dimethylsulfoniopropionate in sugarcane and marine algal extracts

A simple and high-resolution analytical method for the determination of dimethylsulfoniopropionate (DMSP) in sugarcane and marine algae is described. Effective extraction of DMSP from plant samples was also investigated using organic solvents, 5% perchloric acid or deionised water. To increase the sensitivity, DMSP in the extracts was first converted to a phenacyl ester, and the reaction mixture was applied directly to capillary electrophoresis without any pretreatment. Water extraction followed by esterification in a pH 4 reaction buffer was found most suitable for the measurement of alkaline-labile DMSP. This method was applied to the determination of DMSP levels in marine algae samples collected from the seashore of Nagasaki, Japan. An increase in DMSP content in Ulva pertusa in the winter period was observed.     

Capillary electrophoretic analysis of the derivatives and isomers of benzoate and phthalate

A capillary electrophoretic method for the analysis of 12 commonly found derivatives and isomers of benzoate and phthalate, including p-toluic acid, p-acetamido and p-hydroxy derivatives of benzoic acid, salicylic acid and its acetyl ester, 2- and 4-isomers of carboxybenzaldehyde, meta-, para-, and ortho-isomers of phthalic acid, and monomethyl terephthalic acid was developed. Capillary electrophoresis (CE) was performed in the free zone electrophoresis mode. Performing CE in 10 mM phosphate buffer, pH 7.0 could separate most of the benzoic acid derivatives except the structural or positional isomers. The positional isomers of phthalic acids could be completely separated with co-addition of alpha- and beta-cyclodextrins. Addition of poly(ethylene glycol) 600 (4%) could further resolve some structural isomers. The CE method developed here is rapid, i.e. complete separation could be achieved in less than 8 min for the nine monoanionic benzoate derivatives and in less than 14 min for the three dianionic phthalate isomers. The new method has good precision and linearity and can be readily applied to real samples for quantitative analysis. It is sensitive and can detect sub-ppm (w/w) level of impurity in real terephthalic samples.     

Capillary electrophoretic and mass spectrometric analysis of a polydisperse fluorosurfactant

A fluorosurfactant has been studied using capillary electrophoresis and mass spectrometry. The fluorosurfactant, FC134, can be used as a buffer additive in capillary electrophoresis in order to decrease wall adsorption of proteins and in micellar electrokinetic chromatography. However, it has been discovered that this fluorosurfactant is polydisperse, thus containing substances with different lengths and structures. In this work, the fluorosurfactant sample components were separated by capillary electrophoresis. An uncoated as well as a poly(vinyl alcohol)-coated capillary were used with running electrolytes containing methanol and acetic acid. Following the capillary electrophoretic separation, fractions were collected for further analysis by MALDI-MS. Non-fractionated samples were also analyzed both by MALDI-MS and by ESI-MS.     

Capillary electrophoretic analysis of inorganic anions in atmospheric hailstone samples

Micellar electrokinetic capillary chromatography (MEKC) coupled with sample stacking and polarity switching was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320, UK) in human serum in the concentration range of clinical interest. Human serum samples spiked with SC and UK were eluted with methanol from a C18 cartridge, the extract was evaporated and regenerated in a solution that contained 1 mM phosphate buffer (pH 12.3) and 20% methanol. The MEKC separation was performed using an injection time of 275 s, a polarity switching time of 93 s, a phosphate buffer, (pH 12.3, 15 mM) containing 25 mM sodium dodecyl sulfate as separation electrolyte and a fused-silica capillary. The analysis takes about 6 min and gives satisfactory inter-day precision with respect to migration times and linear responses over the 80-900 ng/ml concentration range investigated for SC and UK. Intra-day RSDs (n=4 graphs) for the slopes of the calibration graphs were 4.86% for SC and 3.50% for UK. Inter-day RSDs for the slopes were 4.37% for SC and 5.39% for UK. Detection limits (S/N=3) were about 17 ng/ml for both compounds in human serum. A 1-ml volume of blood serum was necessary to do this determination.     

Capillary electrophoresis separation of vinpocetine and related compounds: prediction of electrophoretic mobilities in partly aqueous media

Offord's equation, a relationship between electrophoretic mobility and charge, size and shape of peptides, has been extended to quantitate the electrophoretic mobility of vinca alkaloids. Partly aqueous protonation constants and the derived theoretical mobilities have been proven to be able to predict experimental electrophoretic mobilities. In practice, seven vincamine derivatives of very low water-solubility were separated by capillary electrophoresis. Buffer total concentration, apparent pH and methanol content, the three most important parameters of the running buffer, were used in triangular resolution mapping to characterize separation. Even though electrophoresis is well known to slow down in partly aqueous media, under our optimized circumstances a baseline separation was achieved within 8 min in each case.     

Capillary electrophoretic analysis of mu- and m-calpain using fluorescently labeled casein substrates

Calpains are unique calcium-dependent thiol proteases that have been proposed to participate in a number of physiological processes including signal transduction and protein turnover in skeletal muscle. Calpains exist in two major forms. Interestingly, the two forms of protease show no significant difference in their action on various substrates. The only demonstrable difference in their activity involves the concentration of calcium required for activation. Both mu- and m-calpains typically achieve half maximal activation at 50 microM and 0.7 mM calcium, respectively. The focus of this study was to examine the action of both forms of calpain on casein substrates and assess whether any differences could be observed in the resulting peptide finger print using capillary electrophoresis. Purified mu- and m-calpain were incubated for various lengths of time with Oregon Green labeled alphas- and beta-casein. The reactions were stopped with sodium dodecyl sulfate (SDS) and products separated by capillary electrophoresis in micellar electrokinetic capillary chromatography (MEKC) mode using laser-induced fluorescence (LIF) detection. Comparison of the electropherograms showed no difference in the peptide profile for either enzyme. However, it was found that beta-casein was hydrolyzed more extensively than alphas-casein, by both enzymes. Capillary electrophoresis was found to be a very sensitive technique for detection of calpain activity. Using beta-casein as substrate, the CE approach was able to detect 2-3 ng of calpain activity. The results also suggest that capillary electrophoresis is a useful tool for proteolytic investigations of protein structure.     

Capillary zone electrophoretic analysis of carbohydrates by direct and indirect UV detection

Summary The analysis of carbohydrates has been always hampered by their lack of UV absorbance above 200 nm, which is an especially challenging problem in capillary electrophoresis due to the very small (nl) sample volumes injected. The introduction of 2-aminopyridine as derivatizing agent allows sensitive direct UV detection of saccharides in the fmol range. However, due to the requirement of the presence of a free aldehyde group only aldoses and uronic acids can be determined. This limitation was recently overcome by means of precolumn derivatization withp-aminobenzoic acid or ethylp-aminobenzoate, which permits the analysis of fructose with a lower mass detection limit of 0.3 and 0.14 pmol, respectively. The detection limits for aldoses were even as low as 15 and 7 fmol. A more universal approach is the use of indirect UV detection, which permits the analysis of carbohydrates, including (1–2)-linked disaccharides and aldonic acids, at the lower pmol level without the need for derivatization.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Capillary electrophoretic chiral separation of hydroxychloroquine and its metabolites in the microsomal fraction of liver homogenates

A rapid, selective, and low-cost chiral capillary electrophoretic method was developed for the simultaneous analysis of hydroxychloroquine (HCQ) and its three chiral metabolites: desethylchloroquine (DCQ), desethylhydroxychloroquine (DHCQ), and bisdesethylchloroquine (BDCQ) in the microsomal fraction of liver homogenates. After liquid-liquid extraction using toluene as extracting solvent, the drug and metabolites were resolved on a fused-silica capillary (50 microm ID, 50 cm total length, and 42 cm effective length), using 100 mmol/L of Tris/phosphate buffer, pH 9.0 containing 1% w/v sulfated-beta-CD and 30 mg/mL hydroxypropyl-beta-CD. Detection was carried out at 220 nm. The extraction procedure was efficient in removing endogenous interferents, and low values (相似文献