掺镍型层状LixNiyMn1-yO2正极材料的合成与电性能研究

A kind of cathode material of layered Li_xNi_yMn_1-yO₂ characterized with the O2 type has been synthesized by a simple method. Its precursor Na_xNi_yMn_1-yO₂ has been prepared from manganese dioxide， nickel hydroxide and sodium carbonate at high temperature in air and quickly cooled in cold water， then it has been exchanged by the melted LiNO₃ at 300～400℃ in air. The effects of calcine-temperature for the precursors and its compositions (the content of Na and Ni) on the electrochemical properties of the material Li_xNi_yMn_1-yO₂ have been investingated by XRD and electrochemical tests. The results show that the sample Li_0.7Ni_0.3Mn_0.7O₂， has the best electrochemical properties which shows only one charge-discharge potential stage of 2.8～3.0V and has a high specific capacity over 180mAh·g^-1 cycled between 2.0～4.20V. A significant structure transformation to the spinal-type phase has not been found in the charge-discharge cycling and the discharge specific capacity around 165mAh·g^-1 has re-mained after the 20th cyclings for the material.     

纳米Mn-Zn铁氧体的制备和研究

Nanosize manganese zinc ferrites were fabricated by hydrothermal precipitation route using Fe₂(SO₄)₃, ZnSO₄·7H₂O, MnSO₄·H₂O as material, then some calcinated at 500 ℃ and studied by XRD, TEM, IR and VSM. The results showed that the products were spinel crystal structure and uniformly sized nanoparticles (15～25 nm) with little aggregation. The analysis of IR showed that the superficial water can be eliminated, but that was embedded in crystal lattice can not be removed by calcinating. The effect Zn content x on the lattice (a) of nanosize Mn_1-xZn_xFe₂O₄ was also discussed. The lattice of nanosize Mn_1-xZn_xFe₂O₄ decreases with x increasing; and its value deviated the standard lattice (a₀) of normal size manganese zinc ferrites. A lot of water was absorbed during the hydrothermal process owing to the large surface of nanosize particles. The change of magnetic properties of Mn_xZn_1-xFe₂O₄ with x increasing was studied: nanosize Mn_xZn_1-xFe₂O₄ particles synthesized by us exhibited peculiar magnetic properties curve with Zn content (x) increasing, Superparamagnetic behaviors of the synthesized ZnFe₂O₄ samples were confirmed by magnetic characterization, which can be explained by the difference between the distribution of the metal ions (Mn²⁺, Zn²⁺ and Fe³⁺) among the tetrahedral (A) and the octahedral (B) sites of nanosize ferrite and that of bulk ferrite.     

新型阴极材料Ba0.5Sr0.5Co0.8Fe0.2O3-σ制备与性能研究

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-σ(BSCF), a new cathode material for solid oxide fuel cell (SOFC), was synthesized by polyacrylicacid (PAA) method. The lattice structures of samples calcined at different temperatures were characte-rized by XRD. Shrinkage, porosity and pore size of the porous BSCF as a function of sintering temperature were investigated. It was found that the cubic perovskite structure could be formed after calcination at 800 ℃ for 2 h, but not well crystallized as seen from some unknown phases, and the pure cubic perovskite structure was formed after calcination at 1 150 ℃ for 2 h. The particle size of BSCF was less than 1～2 μm. The shrinkage of the porous BSCF increased with sintering temperature, but the opposite was true for the porosity. After sintering at 1 100 ℃ for 4 h, the porous BSCF was still in an appropriate structure, with porosity of 29% and electrical conductivity above 400 S·cm^-1.     

纳米Ce1-xLaxO2-δ的微波引诱燃烧合成及其性能表征

Nanometer Ce_1-xLa_xO_2-δ solid solutions were synthesized by microwave-induced combustion process us-ing cerium nitrate hexahydrate， lanthanum nitrate hexahydrate and urea as raw materials. The process took only six minutes to obtain La₂O₃-doped CeO₂ nanopowders. The nanopowders were characterized by XRD， Laser Raman spectrum ， UV-Vis spectroscopy，field-emission scanning electron micrograph(FE-SEM)and TEM. The results revealed that the grain size of Ce_1-xLa_xO_2-δ varied from 20 to 40 nm calculated by Scherer formula through the plane of (111)， that oxygen vacancy was produced in the crystal lattices and the concentration of oxygen vacancy was increased with La doping， therefore the covalence of Ce-O bond was strenthened， which results in more intensive UV-C(200～280 nm)absorption. It can be seen from SEM that the porous appearance was obtained. Grain size is no more than 40nm observed from TEM.     

Li1.02Cr0.1Mn1.9O4表面包覆的热稳定性研究

Improvement of elevated-temperature performance of Li_1.02Cr_0.1Mn_1.9O₄ cathode material by silicious surface modification was studied. The Li_1.02Cr_0.1Mn_1.9O₄ cathode material was treated by silanes coupling agent and then heated at 580 ℃ to remove organic material. The structures of the modified and unmodified Li_1.02Cr_0.1Mn_1.9O₄ were characterized by SpectraPlus, SEM and XRD. The results show that the surface layer of Li_1.02Cr_0.1Mn_1.9O₄ material is found to be rich in silicious compound. X-ray diffraction show that all the samples have perfect spinel structure. The electrochemical characterization of modified Li_1.02Cr_0.1Mn_1.9O₄ cathode material was tested. The cycle stability of charge/discharge at 55℃ is improved. The results of the charge/discharge curves show that the modified Li_1.02Cr_0.1Mn_1.9O₄ has better performance than those unmodified according to the inhibition of decline of reversible capacity of spinel Li_1.02Cr_0.1Mn_1.9O₄. Therefore, cycle performance is improved so obviously that 86.03% of the initial capacity is preserved after 100 cycles.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

阴极材料LaFe0.8-xCuxNi0.2O3的合成和烧结性能

LaFe_0.8-xCu_xNi_0.2O₃ (x=0.0~0.2) (LFCN), a new cathode material of solid oxide fuel cell (SOFC), was synthesized by Co-precipitation method using sodium bicarbonate. The lattice structures of samples with different x contents were characterized by XRD. Porosity and density of the porous LaFe_0.8-xCu_xNi_0.2O₃ (x=0.0~0.1) as a function of sintering temperature were investigated. It was found that the orthorhombic structure could be formed after calcination at 900 ℃ for 4 h. The particle size of LFCN was about 350 nm. The density of the porous LFCN increased with sintering temperature, but the opposite was true for the porosity. On the other hand, at the same sintering temperature, the porosity of LaFe_0.8-xCu_xNi_0.2O₃ (x=0.0~0.1) decreased with increasing x contents. It is indicated that the dopant of Cu on LaFe_0.8Ni_0.2O₃ can facilitate the sintering of the materials. After sintering at 1 100 ℃ for 4 h, the porous LaFe_0.7Cu_0.1Ni_0.2O₃ was still with appropriate structure, and its porosity was 29%.     

流变相法制备LiNi0.5Mn1.5O4锂离子电池正极材料及其电化学性质

LiNi_0.5Mn_1.5O₄ was prepared by rheological method using CH₃COOLi, Ni(CH₃COO)₂ and Mn(CH₃COO)₂ as raw materials. XRD and SEM results show that LiNi_0.5Mn_1.5O₄ synthesized at 850 ℃ has cubic spinel structure with clearly defined shape and particle size of 0.2～0.4 μm. Electrochemical tests show that the LiNi_0.5Mn_1.5O₄ presents a plateau near 4.7 V and delivers the maximum discharge capacity of 140.5 mAh·g^-1. After 100 cycles, the capacity loss per cycle was only 0.015% discharged at 0.2C and the capacity retention was more than 76.3% discharged at 2.0C at room temperature and the capacity loss per cycle was only 0.32% discharged at 0.2C at 55 ℃.     

Li2CO3、NiO和电解MnO2合成高容量LiNi0.5Mn1.5O4及其表征

Well-developed crystalline LiNi_0.5Mn_1.5O₄ was prepared by solid-state reaction using Li₂CO₃, NiO and electrolytic MnO₂ at high heating and cooling rate. X-ray diffraction (XRD) patterns and scanning electron microscopic (SEM) images showed that LiNi_0.5Mn_1.5O₄ synthesized at 900 ℃ and 950 ℃ had cubic spinel structure with clearly defined shape. LiNi_0.5Mn_1.5O₄ spinel phase decomposed at 1 000 ℃ accompanying with structural and morphological degradation. TG measurement revealed that the weight loss during heating process could be mostly gained in cooling process, and the upward tendency of weight loss during heating process decreased, while that of irreversible weight loss rapidly increased with the increase of temperature. LiNi_0.5Mn_1.5O₄ powders prepared at 900 ℃ for 12 h delivered the maximum discharge capacity of 134 mAh·g^-1 with good cyclic performance at 2/7 C. In addition, by adjusting the calcination time at 900 ℃, the capacity and cycling performance of LiNi_0.5Mn_1.5O₄ were further enhanced.     

(Ag0.9Li0.1)(Nb1-yTay)O3纳米瓷粉的制备与表征

A series of (Ag_0.9Li_0.1)(Nb_1-yTa_y)O₃ ceramic powders were prepared by an aque-chemical method. The optimized calcination temperature, time and crystal lattice were studied by TG-DTA, IR, XRD and TEM. The results show that the optimized conditions were calcination of the precursor at 800 ℃ for 2 h. The ceramic powder thus prepared was rhombohedral with the average grain size of 48 nm.     

Chromium(III) Hydroxide Solubility in The Aqueous Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O System: A Thermodynamic Model

Chromium(III)-phosphate reactions are expected to be important in managing high-level radioactive wastes stored in tanks at many DOE sites. Extensive studies on the solubility of amorphous Cr(III) solids in a wide range of pH (2.8–14) and phosphate concentrations (10^–4 to 1.0 m) at room temperature (22±2)°C were carried out to obtain reliable thermodynamic data for important Cr(III)-phosphate reactions. A combination of techniques (XRD, XANES, EXAFS, Raman spectroscopy, total chemical composition, and thermodynamic analyses of solubility data) was used to characterize solid and aqueous species. Contrary to the data recently reported in the literature,⁽¹⁾ only a limited number of aqueous species [Cr(OH)₃H₂PO^–₄, Cr(OH)₃(H₂PO₄)^2–₂), and Cr(OH)₃HPO^2–₄] with up to about four orders of magnitude lower values for the formation constants of these species are required to explain Cr(III)-phosphate reactions in a wide range of pH and phosphate concentrations. The log K^o values of reactions involving these species [Cr(OH)₃(aq)+H₂PO^–₄⇌Cr(OH)₃H₂PO^–₄; Cr(OH)₃(aq)+2H₂PO^–₄⇌Cr(OH)₃(H₂PO₄)^2–₂; Cr(OH)₃(aq)+HPO^2–₄⇌Cr(OH)₃HPO^2–₄] were found to be 2.78±0.3, 3.48±0.3, and 1.97±0.3, respectively.     

CCl2自由基被无机小分子猝灭的速率常数

对CCl4/Ar混合气体脉冲直流高压放电产生CCl2自由基,用541.52 nm激光将电子基态CCl2激励到A 1B1(0,4,0)振动能级上. 通过检测激发态CCl2时间分辨荧光信号,测得室温下CCl2(A 1B1和a 3B1)被O2、N2、NO、 CO2、 CS2、H2O、SO2,和SF6分子猝灭的实验结果.用我们提出的三能级模型分析处理实验数据,获得了CCl2(A 1B1)态和CCl2(a 3B1)态的碰撞猝灭速率常数kA和ka值.     

CCl2(A 1B 1,a3B1)自由基被烷烃类分子猝灭动力学

用放电 LIF实验装置,对CCl4/Ar混合气体放电产生CCl2自由基,再用541.52 nm激光将电子基态CCl2激励到激发态A 1B1(0,4,0)振动能级上,通过检测激发态CCl2时间分辨荧光信号,测得室温下CCl2(A 1B1)被烷烃类分子猝灭的实验结果,用我们提出的三能级模型分析处理实验数据,获得CCl2(A 1B1)态和CCl2(a 3B1)态的碰撞猝灭速率常数kA和ka值.     

Eu3+离子在Ca2PbO4一维结构基质中的发光研究

A Eu³⁺-doped Ca₂PbO₄ with one-dimensional structure was prepared with a solid-state reaction method and its characteristics were investigated. The XRD results show that the substitution of Ca²⁺ by Eu³⁺ has no influence on the structure of Ca₂PbO₄. Under the excitation of ultraviolet light， the Ca₂PbO₄:Eu³⁺ phosphor exhibits strong red emission at about 618 nm which is assigned to the ⁵D₀- ⁷F₂ electric-dipole transition. The compounds Sr₂CeO₄ and Ca₂SnO₄ have the same crystal symmetry as that of Ca₂PbO₄ and it is found that the emission intensity of Ca₂PbO₄∶Eu³⁺ is higher than that of Sr₂CeO₄∶Eu³⁺ and lower than that of Ca₂SnO₄∶Eu³⁺. The excitation spectrum of Ca₂PbO₄∶Eu³⁺ appears to be a broad band with two peaks at about 289 nm and 340 nm. The former peak is attributed to the Eu³⁺-O₂- charge transfer transition， while the latter one may be related to the absorption of Ca₂PbO₄ host or its crystal defects.     

SnO_2改性TiO_2对V_2O_5-WO_3/TiO_2催化剂结构和SCR性能影响

采用共沉淀法将SnO_2组分掺入到V_2O_5-WO_3/TiO_2催化剂载体TiO_2中,并通过多种物理化学手段,考察了不同SnO_2掺入量时对催化剂结构,表面分散物种和SCR性能影响.结果表明,SnO_2掺入到TiO_2中,元素Sn与Ti以Sn—O—Ti键形式相互作用,促进锐钛矿型TiO_2向金红石型TiO_2转变.在特定条件下,VO_x与WO_x物种和SnTi氧化物之间以V—O—Ti(Sn)和W—O—Ti(Sn)键形式相互作用,提高了VO_x物种可还原能力、促进了具有更多B酸酸量四面体WOx物种和V~(5+)物种生成.VW/SnTi催化剂表面VO_x物种与WO_x物种之间的相互作用更强.因此,VW/SnTi催化剂具有更好的SCR活性.     

Ti掺杂对(LaMn1-xTixO3)0.67(NiMn2O4)0.33(0≤x≤0.7)陶瓷材料微结构及电性能影响

采用氧化物固相法制备(LaMn1-xTixO3)0.67(NiMn2O4)0.33系列NTC(Negative temperature coefficient)复合热敏电阻材料。利用TG/DSC、激光粒度分析、XRD、SEM、阻-温特性和老化性能测试等手段,确定了粉体煅烧温度,表征了粉体的颗粒尺寸、陶瓷体的物相、形貌及其电学特性、稳定性等与Ti掺杂量的关系。结果表明:在1 200~1 300℃烧结温度范围内,(LaMn1-xTixO3)0.67(NiMn2O4)0.33复合体系的电阻率ρ25℃随Ti含量的增加而显著增加;电阻率ρ25℃和B值变化范围分别为4.4~53 179Ω.cm、1 357~3 998 K。125℃下老化1 000 h阻值变化率ΔR/R0均小于0.51%。该复合体系电阻率、B值调整范围较大,稳定性好,是一种具有实际应用价值的NTC热敏电阻材料。     

纳米微孔NixZn(1-x)Fe2O4的水热合成研究

０引言尖晶石型铁酸盐是一类重要的磁性材料，它可用于防止电磁波辐射设备以及隐身材料中的吸波剂犤１，２犦，具有价格低廉、吸波性能优良的特点。同时尖晶石型铁酸盐也是一类重要的催化剂，９０年代初又发现了氧缺位的该类化合物具有将CO２还原为C的优良催化性能犤３犦。因此，有关铁酸盐的制备及性能研究一直是化学工作者和材料科学工作者感兴趣的领域。随着新的合成方法的不断涌现，对传统铁氧体材料进行结构改造以提高其性能是一个重要的研究发展方向，本文采用模板剂造孔技术，首次在NixZn（１－x）Fe２O４水热合成中选用模板剂，…     

Ba0.98Bi0.02(Ti0.9Zr0.1)1-xCuxO3陶瓷的介电性能、弛豫行为与结晶化学特性

采用固相合成法,Bi3+作施主掺杂A位,Cu2+作受主掺杂B位,制备了Ba0.98Bi0.02(Ti0.9Zr0.1)1-xCuxO3(x=0,0.01,0.02,0.03)陶瓷样品。借助XRD、LCR等研究了该陶瓷的结构与介电性能。结果表明:当x=0.03时,陶瓷样品出现第二相。通过GULP模拟,缺陷偶极子的稳定性从低到高依次为:[2BiBa.+VBa″]、[2BiBa.+CuTi/Zr″]、[CuTi/Zr″+VO..],结合实验可知:介电弛豫程度与晶体中缺陷偶极子的存在形式相关,其中x=0.01时,晶体中以[2BiBa.+CuTi/Zr″]为主。随Cu2+掺杂量的增加,介电常数增加,介电常数与B位键价和呈反比变化、与八面体BO6的体积呈正比变化。     

Ba0.98Bi0.02(Ti0.9Zr0.1)1-xCuxO3陶瓷的介电性能、弛豫行为与结晶化学特性

采用固相合成法, Bi3+作施主掺杂A位, Cu₂₊作受主掺杂B位, 制备了Ba_0.98Bi_0.02(Ti_0.9Zr_0.1)_1-xCu_xO₃(x=0, 0.01, 0.02, 0.03)陶瓷样品。借助XRD、LCR等研究了该陶瓷的结构与介电性能。结果表明:当x=0.03时, 陶瓷样品出现第二相。通过GULP模拟, 缺陷偶极子的稳定性从低到高依次为:[2Bi_Ba^·+V_Ba"]、[2Bi_Ba^·+Cu_Ti/Zr"]、[Cu_Ti/Zr"+V_O^··], 结合实验可知:介电弛豫程度与晶体中缺陷偶极子的存在形式相关, 其中x=0.01时, 晶体中以[2Bi_Ba^·+Cu_Ti/Zr"]为主。随Cu₂₊掺杂量的增加, 介电常数增加, 介电常数与B位键价和呈反比变化、与八面体BO₆的体积呈正比变化。     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO₂二元氧化物表面NO的NH₃催化还原反应的机理。研究了CrO-CeO₂二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程, 在SCR反应过程中分别切断NH₃和NO的气流, 并采集了所生成的原位漫反射红外光谱图, 通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从E-R机理。