"Spectral implementation" for creating a labeled pseudo-pure state and the Bernstein-Vazirani algorithm in a four-qubit nuclear magnetic resonance quantum processor

A quantum circuit is introduced to describe the preparation of a labeled pseudo-pure state by multiplet-component excitation scheme which has been experimentally implemented on a 4-qubit nuclear magnetic resonance quantum processor. Meanwhile, we theoretically analyze and numerically investigate the low-power selective single-pulse implementation of a controlled-rotation gate, which manifests its validity in our experiment. Based on the labeled pseudo-pure state prepared, a 3-qubit Bernstein-Vazirani algorithm has been experimentally demonstrated by spectral implementation. The "answers" of the computations are identified from the split peak positions in the spectra of the observer spin, which are equivalent to projective measurements required by the algorithms.     

An ab initio study on the vibrational and electronic spectra of the molybdenum–sulfur clusters with Mo2OnS4−n(n=0–4) core

Using the ab initio method, the vibrational and electronic spectra of binuclear molybdenum clusters which contain Mo₂O_nS_4−n(n=0–4) core were investigated. The main absorption bands in the IR spectra of these clusters are assigned and compared with each other, especially for the case of the trans isomers. The electronic spectra were studied by performing the CIS calculations. The ground state and the first excited state of the clusters were discussed by using the natural bond orbital method. It is shown that the band corresponding to the longest wavelength can be assigned to three kinds of transition types. Two transitions, σ(Mo–Mo)→π*(Mo–X_t)(X=S,O) and σ(Mo–Mo)→σ*(Mo–Mo), can be seen in most cases.     

Noncovalent nanohybrid of ferrocene with single-walled carbon nanotubes and its enhanced electrochemical property

The nanoscale hybridization adduct of ferrocene (Fc) and single-walled carbon nanotubes (SWNTs) was prepared and it shows high stability and greatly enhanced sensitivity toward hydrogen peroxide reduction. The electrochemical and hydrolysis results suggest that the strong π–π stacking interaction between Fc and SWNTs play a critical role for its enhanced electrochemical catalytic property. The combined advantages from SWNTs and Fc and the cooperative effect due to this π–π stacking could make this adduct an excellent choice for ultrasensitive electrochemical detections.     

Synthesis, structure and non-linear optical property of a copper(II) thiocyanate three-dimensional supramolecular compound

A novel copper(II) thiocyanate complex [Cu(im)₂(NCS)₂] 1 (im=imidazole) has been prepared and characterized by spectroscopic analysis and crystallographic method. This supramolecular compound exhibits a three-dimensional solid state structure constituted by N–HS hydrogen bonds and π–π stacking interactions. The compound in DMF solutions has a very strong third-order non-linear optical (NLO) behavior with absorption coefficient and refractive index ₂=1.18×10⁻¹¹ mw⁻¹, n₂=−9.00×10⁻¹⁶ m²w⁻¹, respectively, and third-order NLO susceptibility χ⁽³⁾ of 7.00×10⁻¹⁰ esu.     

Spectroscopy and photophysics of flavin-related compounds: 3-ethyl-lumiflavin

Electronic structure and singlet–singlet and triplet–triplet absorption spectra of 3-ethyl-lumiflavin were calculated using time-dependent density functional theory (TD-DFT) methods. The measured lower-energy transitions are well reproduced in calculations, which are limited by the neglect of the solvent interactions. All the observable singlet–singlet and triplet–triplet transitions have π–π^* character. Singlet oxygen production by the studied compound demonstrated that, similar to other lumiflavins, it is an efficient singlet oxygen sensitizer (_Δ = 0.55). Radiationless deactivation of the S₁ state in solutions was shown to result in the T₁ state formation.     

Determination of arsenic, lead, selenium and tin in sediments by slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry using Ru as permanent modifier and NaCl as a carrier

A procedure for the determination of As, Pb, Se and Sn in sediment slurries by electrothermal vaporization inductively coupled plasma mass spectrometry is proposed. The slurry, 1 mg ml⁻¹, is prepared by mixing the sample ground to a particle size 50 μm with 5% v/v nitric and 1% v/v hydrofluoric acids in an ultrasonic bath. The slurry was homogenized with a constant flow of argon in the autosampler cup, just before transferring an aliquot to the graphite furnace. The tube was treated with Ru as a permanent modifier, and an optimized mass of 1 μg of NaCl was added as a physical carrier. The pyrolysis temperature was optimized through pyrolysis curves, and a compromised temperature of 800 °C was used; the vaporization temperature was 2300 °C. The effect of different acid concentrations in the slurry on the analyte signal intensities was also evaluated. The accuracy of the method was assured by the analysis of certified reference sediments MESS-2, PACS-2 and HISS-1 from the National Research Council Canada, SRM 2704 and SRM 1646a from the National Institute of Standards and Technology and RS-4 from a round robin test, using external calibration with aqueous standards prepared in the same medium as the slurries. The obtained concentrations were in agreement with the certified values according to the Student's t-test for a confidence level of 95%. The detection limits in the samples were: 0.17 μg g⁻¹ for As; 0.3 μg g⁻¹ for Pb; 0.05 μg g⁻¹ for Se and 0.28 μg g⁻¹ for Sn. The precision found for the different sediment samples, expressed as R.S.D. was 1–8% for As, 2–9% for Pb, 6–12% for Se and 3–8% for Sn (n=5).     

Wide range pH measurements using a single H(+)-selective chromoionophore and a time-based flow method

A hydrophilic transparent triacetyl cellulose membrane was adopted as a pH optode by immobilizing highly selective and sensitive Nile blue indicator on the membrane. Contrary to the common procedure for determinations using optodes, in which a steady state response is measured, a new approach is introduced in which the dynamic response of the optode is used as the analytical signal. While in common procedures, pH optodes exhibit limited linear dynamic range (often 2–4 pH units only), it is shown that in a time-based flow method, an optode with only one acid-base indicator can be used for measurement in the pH range of 0–10. The procedure is simple, inexpensive and rapid.     

Predissociation of chlorobenzene, beyond the pseudo-diatomic model

Dissociation of chlorobenzene via the lowest singlet excited state has been investigated by means of pump–probe femtosecond spectroscopy and spin–orbit corrected ab initio quantum chemistry. We have found that the so far accepted model with a ¹ππ^* → ³π/nσ^* reaction mechanism has to be amended. We suggest that the mechanism goes via a transition from ¹ππ^* to a πσ^* state that is to 90% a singlet. Further, three nuclear degrees of freedom required to describe the dissociation have been defined.     

The direct synthesis of dimethyl ether from syngas over hybrid catalysts with sulfate-modified γ-alumina as methanol dehydration components

A series of γ-Al₂O₃ samples modified with various contents of sulfate (0–15 wt.%) and calcined at different temperatures (350–750 °C) were prepared by an impregnation method and physically admixed with CuO–ZnO–Al₂O₃ methanol synthesis catalyst to form hybrid catalysts. The direct synthesis of dimethyl ether (DME) from syngas was carried out over the prepared hybrid catalysts under pressurized fixed-bed continuous flow conditions. The results revealed that the catalytic activity of SO₄²⁻/γ-Al₂O₃ for methanol dehydration increased significantly when the content of sulfate increased to 10 wt.%, resulting in the increase in both DME selectivity and CO conversion. However, when the content of sulfate of SO₄²⁻/γ-Al₂O₃ was further increased to 15 wt.%, the activity for methanol dehydration was increased, and the selectivity for DME decreased slightly as reflected in the increased formation of byproducts like hydrocarbons and CO₂. On the other hand, when the calcination temperature of SO₄²⁻/γ-Al₂O₃ increased from 350 °C to 550 °C, both the CO conversion and the DME selectivity increased gradually, accompanied with the decreased formation of CO₂. Nevertheless, a further increase in calcination temperature to 750 °C remarkably decreased the catalytic activity of SO₄²⁻/γ-Al₂O₃ for methanol dehydration, resulting in the significant decline in both DME selectivity and CO conversion. The hybrid catalyst containing the SO₄²⁻/γ-Al₂O₃ with 10 wt.% sulfate and calcined at 550 °C exhibited the highest selectivity and yield for the synthesis of DME.     

Spectroscopic study of harmane in micelles at 77 K using fluorescent probes

Steady-state and time-resolved emission for spectroscopic techniques at 77 K, and molecular orbital calculations using PM3-MOPAC/93 and HAM/3-CI have been used to study the two forms of harmane, the neutral (HN) and the monoprotonated (HH), in different environments. In hydrophobic media, for (HN), four species were determined and in hydrophilic medium, for (HH), we found just one species. The photophysical properties of all these species were determined, and we verified that each one of them displays distinct photophysical properties from one to another. For example, for monomer of (HN), the lowest electronic singlet state S₁ is (π,π^*) and the lowest electronic triplet state T₁ is (π,π^*), due to the phosphorescence lifetime it is t=0.8 s. For the (HH) monomer, the S₁ is (π,π^*) and T₁ is (π,π^*) and the spin–orbital coupling is inefficient. These determinations were used to characterise and to identify the harmane species that is solubilised into the interior of neutral (triton X-100), anionic (dodecyl lithium sulphate) and cationic (hexadecyltrimethyl ammonium bromide) micelles, all of them were prepared under physiological conditions. The results indicated that active species in the interior of the micelles is a hydrogen bond complex between (HN) and micellar environments that is anchored in the aqueous region of micelles.     

Soft chemistry synthesis of the perovskite CaCu3Ti4O12

The perovskite CaCu₃Ti₄O₁₂ (CCT) has been obtained after calcination of oxalate precursors at 900–1000 °C in air. Those precursors are prepared using a soft chemistry method, the coprecipitation. The oxalate powders consist of disk-like particles of 2–3 μm diameter and 300–400 nm thickness. By varying the ratio of the initial amounts of metal chlorides, additional phases (CaTiO₃, TiO₂ and CuO) could be obtained besides CCT. The corresponding multiphased ceramics present improved dielectric properties.     

A novel π-donor–π-acceptor system: 1-(4,5-dimethyl-1,3-dithiol-2-ylidene)-1-ferrocenyl-3,3-dicyanopropene

The title compound was prepared by reacting the anion of malononitrile with the corresponding ethanal, and characterised by UV–vis absorption spectroscopy, cyclic voltammetry and X-ray crystallography. Attachment of an additional ferrocenyl donor group to the π-donor–π-acceptor system does not enhance intramolecular charge transfer, because its bulk distorts the planarity of the conjugated chain.     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

Raman scattering study of highly fluorinated graphite

Raman spectra of highly fluorinated C_xF samples (1<x<2) prepared at room temperature and 515°C were measured. C_xF samples prepared at room temperature exhibited two Raman bands at 1593–1583 and 1555–1542 cm⁻¹. Graphite samples fluorinated at 515°C for 1 and 2 min also gave similar bands at 1581–1580 and 1550–1538 cm⁻¹. However, graphite samples fluorinated from 15 min to 10 h at 515°C no longer showed such spectra. The Raman peaks shifted to lower frequencies with increasing fluorine concentration in C_xF. This trend is due to the weakening of the C---C bonds of the graphene layers. Observation of both kinds of Raman bands suggests the coexistence of two highly fluorinated phases, C₂F and C₁F, in the samples. The process of formation of graphite fluoride is discussed on the basis of the Raman spectra of C_xF samples obtained at 515°C.     

Simultaneous multianalysis for tumor markers by antibody fragments microarray system

It is often necessary to measure a spectrum of tumor markers in oncology. We have developed a simultaneous multiplexing immunoassay method to determine six tumor markers: -fetoprotein (AFP), carcinoma embryonic antigen (CEA), beta-human chorionic gonadotropin (β-HCG), carbohydrate antigen 125 (CA 125), carbohydrate antigen 19-9 (CA 19-9) and carbohydrate antigen 15-3 (CA 15-3). F(ab′)₂ fragments of six capture antibodies were prepared and printed as microarrays on silylated slides to perform sandwich immunoassays with the use of an avidin–biotin system for amplified fluorescence signals. Each antigen with different concentrations was detected to assemble its calibration curve, and combinations of different markers were determined to examine the specificity of simultaneous detection based on the F(ab′)₂ microarrays. Some clinical samples were analyzed to compare with results obtained with the use of immunoradiometric assay (IRMA) method. Wide range calibration curve and its R-value were obtained for each analyte. Calibration curves concentrations were 0–640 μg/l for CEA, AFP and β-HCG, and 0–1280 kU/l for CA 125, CA 19-9 and CA 15-3. The antibody fragments microarray system bears comparison with conventional immunoassays and may find feasible application in measurement of series markers in oncology and other areas of medicine.     

Rotational excitation of ions produced by the He(2 S) Penning ionization of CO and N2

Rotational-state distributions of the CO⁺ (A–X, B–X) and N₂⁺(B–X) emissions produced by the collisions of He(2 ³S) with CO and N₂ were studied in the collision energy (E_R range 100–200 meV. The rotational populations of the emitting states can be fitte by single Boltzmann temperatures (T_R. The T_R (320 ± 30 K) for the ν′ = 3 and 4 levels of the CO⁺ (A²Π) state are nearly independent of, or slightly increase with, E_R, while T_R for the CO⁺(B²Σ⁺, ν′ = 0) state increases rapidly with E_R.The T_R (430 ± 20 K) for the N₂⁺(B²Σ⁺, ν′ = 0) state is nearly independent or slightly decreases with increasing E_R. Interactions providing these trends are discussed.     

Ultrasound-assisted extraction of capsaicinoids from peppers

The development of a rapid, reproducible and simple method of extraction of the majority capsaicinoids (nordihydrocapsaicin, capsaicin, dihydrocapsaicin, homocapsaicin and homodihydrocapsaicin) present in hot peppers by the employment of ultrasound-assisted extraction is reported. The study has covered four possible solvents for the extraction (acetonitrile, methanol, ethanol and water), the optimum temperature for extraction (10–60 °C), the extraction time (2–25 min), the quantity of sample (0.2–2 g), and the volume of solvent (15–50 mL). Under the optimum conditions of the method developed, methanol is employed as solvent, at a temperature of 50 °C and an extraction time of 10 min. The repeatability and reproducibility of the method (R.S.D. < 3%) have been determined. The capsaicinoids extracted have been analysed by HPLC with fluorescence detection and using monolithic columns for the chromatographic separation. The method developed has been employed for the quantification of the various capsaicinoids present in different varieties of hot peppers cultivated in Spain.     

Additivity of electron correlation energy and the ab initio MO calculation of (0–0) S1←S0 transition energies: polychlorinated dibenzofurans

The energies of the S₀ and S₁ states of polychlorinated dibenzofurans (PCDFs) were calculated using the Hartree–Fock (HF) and configuration interaction-singles (CIS) methods. We can obtain the (0–0) transition energies of PCDFs with good accuracy if the energies calculated using the HF and CIS methods are adjusted to take the electron correlation energy into account. The correlation energy of the S₀ state was calculated using the Møller–Plesset correlation correction truncated at the second order (MP2), and that of the S₁ state was determined using experimental data. The correlation energies for both S₀ and S₁ states were expressed as the sum of the contributions arising from dibenzofuran (DF) and substituted chlorine atoms. The energy of the ground state calculated using the additivity approximation was in good agreement with the energy given directly by the MP2 method. The (0–0) S₁←S₀ transition energies corrected for electron correlation energy agreed well with the available experimental data. The approach proposed in this paper may be useful for the estimation of the electronic transition energy for large aromatic molecules.     

Permeation-solid adsorbent sampling and GC analysis of formaldehyde

A passive method with membrane permeation sampling for the determination of time-weighted-average (TWA) concentration of formaldehyde in air is described. The sampling device was constructed by affixing an unbacked dimethyl silicone membrane to the base of a glass tube and by sealing the top with a rubber stopper. Formaldehyde permeates the membrane and reacts with 2-(hydroxymethyl)piperidine (2-HMP) coated on the surface of XAD-2. Sampling times from 15 min to 8 hr have been used. The formaldehyde—oxazolidine produced is thermally desorbed and determined by a packed column gas chromatograph equipped with a flame ionization detector (FID). The response of the monitor is directly proportional to the external concentration of formaldehyde over the concentration range 0.050–100 ppm. The permeation constant (the slope of the permeation curve) of the membrane is 0.333 μg ppm⁻¹. hr, and the detection limit of the method is 0.03 ppm for an 8-hr sampling period. Relative humidity (RH) (35–94%), temperature (0–82°) and storage period (0–25 days) do not affect the permeation process for sample collection. Moreover, potential chemical interferences, 10 ppm acetone or acrolein, respectively, have no detectable effect on the process. The method gives TWA concentration directly from the measurements, and the equipment is economical and convenient for personal or multi-location sample collections.     

Syntheses, crystal structures and electronic properties of a series of copper(II) complexes with 3,5-halogen-substituted Schiff base ligands and their solutions

We have systematically investigated the structural features, electronic properties, thermally-induced structural phase transitions and absorption spectra depending on the solvent for ten Cu(II) complexes with 3,5-halogen-substituted Schiff base ligands. Structural characterization of two new complexes, bis(N-R-1-phenylethyl- and N-R,S-2-butyl-5-bromosalicydenaminato-κ²N,O)copper(II), reveals that they afford a compressed tetrahedral trans-[CuN₂O₂] coordination geometry with trans-N–Cu–N = 159.4(2)° and trans-O–Cu–O = 151.7(3)° for the 1-phenylethyl complex and trans-N–Cu–N = 157.9(3)° and trans-O–Cu–O = 151.0(3)° for the 2-butyl one. All the complexes exhibit a structural phase transition by heating in the solid state regardless of their structures at room temperature. The absorption spectra of a series of ten complexes exhibit a slight shift of the d–d band at 16 000–20 000 cm⁻¹ and remarkable shift of the π–π* band at 24 000–28 000 cm⁻¹, which suggests that the dipole moment of the solvents presumably affects the conformation of the π-conjugated moieties of the ligands rather than the coordination environment. We have also attempted ‘photochromic solute-induced solvatochromism’ by a system of bis(N-R-1-phenylethyl-3,5-dichlorosalicydenaminato-κ²N,O)copper(II) and photochromic 4-hydroxyazobenzene in chloroform solution. We successfully observed a change of the d–d and π–π* bands of the complex in the absorption spectra caused by cis–trans photoisomerization of 4-hydroxyazobenzene.