Synthesis and characterization of dimetallic oxorhenium(V) and dioxorhenium(VII) compounds, and a study of stoichiometric and catalytic reactions

Chelating dithiolate ligands--e.g., mtp from 2-(mercaptomethyl)thiophenol, edt from 1,2-ethanedithiol, and pdt from 1,3-propanedithiol--stabilize high-valent oxorhenium(V) against hydrolytic and oxidative decomposition. In addition to the dithiolate chelating to a single rhenium, one sulfur forms a coordinate bond to the other rhenium. In one arrangement this gives a dimer with a nearly planar diamond core with different internal Re-S distances. The new compounds are [MeReO(edt)](2) (2) and [MeReO(pdt)](2) (3), which can be compared to the previously known [MeReO(mtp)](2) (1). Another mode of synthesis leads to [ReO](2)(mtp)(3) (5) and [ReO](2)(edt)(3) (6). They, too, have similar Re(2)S(2) cores that involve donor atoms from two of the dithiolate ligands; the third dithiolate chelates one of the rhenium atoms. Gentle hydrolysis of 1 affords [Bu(n)4][[MeReO(mtp)](2)(mu-OH)] (7) in low yield. It appears to be the first example of this structural type for rhenium. The use of dithioerythritol as a starting material allowed the synthesis of a dioxorhenium(VII) compound, [MeReO(2)](2)(dte) (8). Its importance lies in understanding the role such compounds are believed to play as intermediates in oxygen atom catalysis. Ligation of the dimers 1-3 converts them into monomeric compounds, MeReO(dithiolate)L. These reactions go essentially to completion for L = PPh(3), but reach an equilibrium for L = NC(5)H(4)R. With R = 4-Ph, the values of K/10(3) L mol(-1) for the reactions (1-3) + 2L = 2MeReO(dithiolate)L are identical within 3 sigma: 1.15(3) (1), 1.24(4) (2), and 1.03(16) (3). The rates of monomer formation follow the rate law -d ln [dimer]/dt = k(a)[L] + k(b)[L](2). These trends were found: (1) phosphines are slow to react compared to pyridines, (2) the edt dimer 2 reacts much more rapidly than 1 and 3. Dimer 1 and MeReO(mtp)PPh(3) both catalyze oxygen atom transfer: PicO + PPh(3) --> Pic + Ph(3)PO. Compound 1 is ca. 90 times more reactive, which can be attributed to its lability toward small ligands as opposed to the low rate of displacement of PPh(3) from the mononuclear catalyst. The kinetics of this reaction follows the rate law -d[PicO]/dt = k[PicO][1]/[1 + kappa[PPh(3)]], with k = 5.8 x 10(6) L mol(-1) s(-1) and kappa = 3.5 x 10(2) L mol(-1) at 23 degrees C in benzene. A mechanism has been proposed to account for these findings.     

Rhenium(V) complexes with thiolato and dithiolato ligands: synthesis, structures, and monomerization reactions

The new compound {(PhS)(2)ReO(mu-SPh)}(2), 1, was synthesized from Re(2)O(7) and PhSH and then used as the synthon for a number of hitherto unknown oxorhenium(V) compounds. Reactions between dithiols and 1 (2:1 ratio) afford {PhSReO(dt)}(2), where the dithiols, dtH(2), are 1,2-ethanedithiol (edtH(2)), 1,3-propanedithiol (pdtH(2)), 1,3-butanedithiol (pdtMeH(2)), 1,2-benzenedithiol (bdtH(2)), 2-(mercaptomethyl)thiophenol (mtpH(2)), and 2-mercaptoethyl sulfide (mesH(2)). Similar reactions carried out with a 3:1 ratio of dtH(2) to 1 afford [(ReO)(2)(dt)(3)], dt = edt, pdt. When NEt(3) was introduced prior to the 3:1 reaction between edtH(2) and 1, a compound containing an anionic complex was isolated, [PPh(4)][ReO(edt)(2)]. The new compounds were characterized analytically, spectroscopically, and crystallographically. The Re-O groups in two of the compounds, 1 and {ReO(mu-SPh)(bdt)}(2), exist in rare anti orientations; the others adopt the more familiar syn geometry, as discussed. Selected monomerization reactions of {PhSReO(dt)}(2) were also carried out: {PhSReO(dt)}(2) + 2L = 2[PhSReO(dt)L]. The rate for L = 4-phenylpyridine is given by v = {k(a)[L] + k(b)[L](2)} x [{PhSReO(dt)}(2)], as it is for the reactions of {MeReO(dt)}(2); for all of these compounds, the reaction proceeds nearly entirely by the third-order pathway. Values of k(b)/L(2) mol(-2) s(-1) at 25.0 degrees C are 5.8 x 10(2) (mtp), 2.97 x 10(3) (pdt), 4.62 x 10(5) (edt), and 3.87 x 10(5) (bdt). The rate law for the reactions of {PhSReO(dt)}(2) with L = PAr(3) is v = k(a)[L]/{1 + kappa[L]} x [{PhSReO(dt)}(2)]. For PPh(3), values at 25.0 degrees C of k(a)/L mol(-1) s(-1) (kappa/L mol(-1)) for {PhSReO(dt)}(2) are 9.64 x 10(-2) (1.87) for mtp, 3.43 x 10(-2) (0.492) for pdt, 1.91 (1.42) for edt, 1.84 x 10(-2) (0.82) for bdt, and 1.14 x 10(3) (10.6) for 1. Mechanisms are proposed that are consistent with the data obtained and with earlier work.     

Unusual reactivity of the [Re(V)O]3+ core: syntheses and characterization of novel rhenium halide complexes with n-methyl-o-diaminobenzene

The reactions of 1 or 2 equiv of N-methyl-o-diaminobenzene with trans-[ReOX(3)(PPh(3))(2)] (X = Cl, Br) in refluxing chloroform gave oxo-free rhenium complexes [Re(VI)X(4)(NC(6)H(4)NHCH(3))(OPPh(3))] (X = Cl, 3; X = Br, 6), [Re(V)X(2)Y(NC(6)H(4)NHCH(3))(PPh(3))(2)] (X, Y = Cl, 4; X = Br, Y = Cl, 7), [Re(IV)Cl(2)(NHC(6)H(4)NCH(3))(2)] (5), and [Re(IV)Br(3)(NHC(6)H(4)NCH(3))(PPh(3))] (8). All complexes were characterized by elemental analysis, (1)H NMR and IR spectroscopy, cyclic voltammetry, EPR spectroscopy, and X-ray crystallography. The complexes all display distorted octahedral coordination geometry. For Re(IV) complexes 5 and 8, the ligands coordinate in the benzosemiquinone diimine form. In Re(VI) complexes 3 and 6 and the Re(V) complexes 4 and 7, the ligands coordinate in the dianionic monodentate imido form. The EPR spectra of Re(VI) species 3 and 6 in dichloromethane solution at room temperature exhibit the characteristic hyperfine pattern of six lines, with evidence of strong second-order effects. The IR spectra of the complexes are characterized by Re=N and Re-N stretching bands at ca. 1090 and 540 cm(-)(1), respectively. The Re(IV) and Re(V) complexes display well-resolved NMR spectra, while the Re(VI) complexes exhibit no observable spectra, due to paramagnetism. The cyclic voltammograms of complexes 3 and 6 display Re(VII)/ Re(VI) and Re(VI)/Re(V) processes, those of 4 and 7 exhibit Re(VI)/Re(V) and Re(V)/Re(IV) couples, and those of 5 and 8 are characterized by Re(V)/Re(IV) and Re(IV)/Re(III) processes.     

Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Thermodynamics, kinetics, and mechanism of the reversible formation of oxorhenium(VII) catecholate complexes

Mononuclear Re(V) compounds MeReO(mtp)NC(5)H(4)X, 3, where mtpH(2) is 2-(mercaptomethyl)thiophenol have been prepared from the monomerization of [MeReO(mtp)](2) by pyridines with electron-donating substituents in the para or meta position; X = 4-Me, 4-Bu(t), 3-Me, 4-Ph, and H. Analogous compounds, MeReO(edt)N(5)H(4)X, 4, edtH(2) = 1,2-ethanedithiol, were prepared similarly. The equilibrium constants for the reaction, dimer + 2Py = 2M-Py, are in the range (2.5-31.6) x 10(2) L mol(-1). Both groups of monomeric compounds react with quinones (phenanthrenequinone, PQ, and 3,5-tert-butyl-1,2-benzoquinone, DBQ), displacing the pyridine ligand and forming Re(VII) catecholate complexes MeReO(dithiolate)PCat and MeReO(dithiolate)DBCat. With PQ, the reaction MeReO(dithiolate)Py + PQ = MeReO(dithiolate)PCat + Py is an equilibrium; values of K(Q) for different Py ligands lie in the ranges 9.2-42.7 (mtp) and 3.2-11.2 (edt) at 298 K. These second-order rate constants (L mol(-1) s(-1)) at 25 degrees C in benzene were obtained for the PQ reactions: k(f) = (5.3-15.5) x 10(-2) (mtp), (6.6-16.4) x 10(-2) (edt); k(r) = (3.63-5.71) x 10(-3) (mtp), (14.7-22.0) x 10(-3) (edt). The ranges in each case refer to the series of pyridine ligands, the forward rate constant being the largest for C(5)H(5)N, with the lowest Lewis basicity. The reactions of MeReO(dithiolate)Py with DBQ proceed to completion. Values of k(f)/L mol(-1) s(-1) fall in a narrow range, 4.02 (X = Bu(t)) to 8.4 (X = H) with the dithiolate being mtp.     

Syntheses and structures of pyrazolylmethane complexes of rhenium(III), (IV) and (V)

Reaction of [ReOCl3(PPh3)(2)] with HCpz(3) (pz = pyrazole) in dichloromethane leads to the formation of a new Re(iv) complex [ReCl3(HCpz3)]X (X=Cl, [ReO4]) with loss of the rhenium-oxo group. We also report a convenient, high-yield synthetic route to complexes of the type [ReOXn(L)](3-n)+ (X=Cl, Br, n = 2, 3) by the reaction of bis(pyrazolylmethane) and bis(pyrazolylacetate) ligands with [ReOCl3(PPh3)2]. Dinuclear complexes containing the O=Re-O-Re=O group were also isolated and structurally characterised. We have also investigated the reactions of these ligands with diazenide precursors and isolated and characterised complexes of the type [ReClx(N2Ph) (L)(PPh3)] (x = 1,2). The potential applications of these complexes as radiopharmaeuticals is discussed.     

Synthesis,molecular structure,and C-C coupling reactions of carbeneruthenium(II) complexes with C5H5Ru(=CRR') and C5Me5Ru(=CRR') as molecular units

The ethene derivatives [(eta(5)-C(5)R(5))RuX(C(2)H(4))(PPh(3))] with R=H and Me, which have been prepared from the eta(3)-allylic compounds [(eta(5)-C(5)R(5))Ru(eta(3)-2-MeC(3)H(4))(PPh(3))] (1, 2) and acids HX under an ethene atmosphere, are excellent starting materials for the synthesis of a series of new halfsandwich-type ruthenium(II) complexes. The olefinic ligand is replaced not only by CO and pyridine, but also by internal and terminal alkynes to give (for X=Cl) alkyne, vinylidene, and allene compounds of the general composition [(eta(5)-C(5)R(5))RuCl(L)(PPh(3))] with L=C(2)(CO(2)Me)(2), Me(3)SiC(2)CO(2)Et, C=CHCO(2)R, and C(3)H(4). The allenylidene complex [(eta(5)-C(5)H(5))RuCl(=C=C=CPh(2))(PPh(3))] is directly accessible from 1 (R=H) in two steps with the propargylic alcohol HC triple bond CC(OH)Ph(2) as the precursor. The reactions of the ethene derivatives [(eta(5)-C(5)H(5))RuX(C(2)H(4))(PPh(3))] (X=Cl, CF(3)CO(2)) with diazo compounds RR'CN(2) yield the corresponding carbene complexes [(eta(5)-C(5)R(5))RuX(=CRR')(PPh(3))], while with ethyl diazoacetate (for X=Cl) the diethyl maleate compound [(eta(5)-C(5)H(5))RuCl[eta(2)-Z-C(2)H(2)(CO(2)Et)(2)](PPh(3))] is obtained. Halfsandwich-type ruthenium(II) complexes [(eta(5)-C(5)R(5))RuCl(=CHR')(PPh(3))] with secondary carbenes as ligands, as well as cationic species [(eta(5)-C(5)H(5))Ru(=CPh(2))(L)(PPh(3))]X with L=CO and CNtBu and X=AlCl(4) and PF(6), have also been prepared. The neutral compounds [(eta(5)-C(5)H(5))RuCl(=CRR')(PPh(3))] react with phenyllithium, methyllithium, and the vinyl Grignard reagent CH(2)=CHMgBr by displacement of the chloride and subsequent C-C coupling to generate halfsandwich-type ruthenium(II) complexes with eta(3)-benzyl, eta(3)-allyl, and substituted olefins as ligands. Protolytic cleavage of the metal-allylic bond in [(eta(5)-C(5)H(5))Ru(eta(3)-CH(2)CHCR(2))(PPh(3))] with acetic acid affords the corresponding olefins R(2)C=CHCH(3). The by-product of this process is the acetato derivative [(eta(5)-C(5)H(5))Ru(kappa(2)-O(2)CCH(3))(PPh(3))], which can be reconverted to the carbene complexes [(eta(5)-C(5)H(5))RuCl(=CR(2))(PPh(3))] in a one-pot reaction with R(2)CN(2) and Et(3)NHCl.     

Rhenium chemistry of diazabutadienes and derived iminoacetamides spanning the valence domain II-VI. Synthesis, characterization, and metal-promoted regiospecific imine oxidation

The reaction of diazabutadienes of type R'N=C(R)-C(R)=NR', L (R = H, Me; R' = cycloalkyl, aryl) with Re(V)OCl(3)(AsPh(3))(2) has furnished Re(V)OCl(3)(L), 1, from which Re(III)(OPPh(3))Cl(3)(L), 2, and Re(V)(NAr)Cl(3)(L), 3, have been synthesized. Chemical oxidation of 2(R = H) by aqueous H(2)O(2) and of 3(R = H) by dilute HNO(3) has yielded Re(IV)(OPPh(3))Cl(3)(L'), 5, and Re(VI)(NAr)Cl(3)(L'), 4, respectively, where L' is the monoionized iminoacetamide ligand R'N=C(H)-C(=O)-NR'(-). Finally, the reaction of Re(V)O(OEt)X(2)(PPh(3))(2) with L has furnished bivalent species of type Re(II)X(2)(L)(2), 6(X = Cl, Br). The X-ray structures of 1 (R = Me, R' = Ph), 3 (R = H, R' = Ph, Ar = Ph), and 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl) are reported revealing meridional geometry for the ReCl(3) fragment and triple bonding in the ReO (in 1) and ReNAr (in 3 and 4 ) fragments. The cis geometry (two Re-X stretches) of ReX(2)(L)(2) is consistent with maximized Re(II)-L back-bonding. Both ReX(2)(L)(2) and Re(NAr)Cl(3)(L') are paramagnetic (S = (1)/(2)) and display sextet EPR spectra in solution. The g and A values of Re(NAr)Cl(3)(L') are, respectively, lower and higher than those of ReX(2)(L)(2). All the complexes are electroactive in acetonitrile solution. The Re(NAr)Cl(3)(L) species display the Re(VI)/Re(V) couple near 1.0 V versus SCE, and coulometric studies have revealed that, in the oxidative transformation of 3 to 4, the reactive intermediate is Re(VI)(NAr)Cl(3)(L)(+) which undergoes nucleophilic addition of water at an imine site followed by induced electron transfer finally affording 4. In the structure of 3 (R = H, R' = Ph, Ar = Ph), the Re-N bond lying trans to the chloride ligand is approximately 0.1 A shorter than that lying trans to NPh. It is thus logical that the imine function incorporating the former bond is more polarized and therefore subject to more facile nucleophilic attack by water. This is consistent with the regiospecificity of the imine oxidation as revealed by structure determination of 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl).     

Syn-Anti Isomerism in a Mixed-Ligand Oxorhenium Complex, ReO[SN(R)S][S

The simultaneous action of the tridentate ligand (C(2)H(5))(2)NCH(2)CH(2)N(CH(2)CH(2)SH)(2) and the monodentate coligand HSC(6)H(4)OCH(3) on a suitable ReO(3+) precursor results in a mixture of syn- and anti-oxorhenium complexes, ReO[(C(2)H(5))(2)NCH(2)CH(2)N(CH(2)CH(2)S)(2)] [SC(6)H(4)OCH(3)], in a ratio of 25/1. The complexes are prepared by a ligand exchange reaction using ReO(eg)(2) (eg = ethylene glycol), ReOCl(3)(PPh(3))(2), or Re(V)-citrate as precursor. Both complexes have been characterized by elemental analysis, FT-IR, UV-vis, X-ray crystallography, and NMR spectroscopy. The syn isomer C(17)H(29)N(2)O(2)S(3)Re crystallizes in the monoclinic space group P2(1)/n, a = 14.109(4) ?, b = 7.518(2) ?, c = 20.900(5) ?, beta = 103.07(1) degrees, V = 2159.4(9) ?(3), Z = 4. The anti isomer C(17)H(29)N(2)O(2)S(3)Re crystallizes in P2(1)/n, a = 9.3850(7) ?, b = 27.979(2) ?, c = 8.3648(6) ?, beta = 99.86(1) degrees, V = 2163.9(3) ?(3), Z = 4. Complete NMR studies show that the orientation of the N substituent chain with respect to the Re=O core greatly influences the observed chemical shifts. Complexes were also prepared at the tracer ((186)Re) level by using (186)Re-citrate as precursor. Corroboration of the structure at tracer level was achieved by comparative HPLC studies.     

Reactivity of rhenium(V) oxo Schiff base complexes with phosphine ligands: rearrangement and reduction reactions

The symmetric rhenium(V) oxo Schiff base complexes trans-[ReO(OH2)(acac2en)]Cl and trans-[ReOCl(acac2pn)], where acac2en and acac2pn are the tetradentate Schiff base ligands N,N'-ethylenebis(acetylacetone) diimine and N,N'-propylenebis(acetylacetone) diimine, respectively, were reacted with monodentate phosphine ligands to yield one of two unique cationic phosphine complexes depending on the ligand backbone length (en vs pn) and the identity of the phosphine ligand. Reduction of the Re(V) oxo core to Re(III) resulted on reaction of trans-[ReO(OH2)(acac2en)]Cl with triphenylphosphine or diethylphenylphosphine to yield a single reduced, disubstituted product of the general type trans-[Re(III)(PR3)2(acac2en)]+. Rather unexpectedly, a similar reaction with the stronger reducing agent triethylphosphine yielded the intramolecularly rearranged, asymmetric cis-[Re(V)O(PEt3)(acac2en)]+ complex. Reactions of trans-[Re(V)O(acac2pn)Cl] with the same phosphine ligands yielded only the rearranged asymmetric cis-[Re(V)O(PR3)(acac2pn)]+ complexes in quantitative yield. The compounds were characterized using standard spectroscopic methods, elemental analyses, cyclic voltammetry, and single-crystal X-ray diffraction. The crystallographic data for the structures reported are as follows: trans-[Re(III)(PPh3)2(acac2en)]PF6 (H48C48N2O2P2Re.PF6), 1, triclinic (P), a = 18.8261(12) A, b = 16.2517(10) A, c = 15.4556(10) A, alpha = 95.522(1) degrees , beta = 97.130(1) degrees , gamma = 91.350(1) degrees , V = 4667.4(5) A(3), Z = 4; trans-[Re(III)(PEt2Ph)2(acac2en)]PF6 (H48C32N2O2P2Re.PF6), 2, orthorhombic (Pccn), a = 10.4753(6) A, b =18.4315(10) A, c = 18.9245(11) A, V = 3653.9(4) A3, Z = 4; cis-[Re(V)O(PEt3)(acac2en)]PF6 (H33C18N2O3PRe.1.25PF6, 3, monoclinic (C2/c), a = 39.8194(15) A, b = 13.6187(5) A, c = 20.1777(8) A, beta = 107.7730(10) degrees , V = 10419.9(7) A3, Z = 16; cis-[Re(V)O(PPh3)(acac2pn)]PF6 (H35C31N2O3PRe.PF6), 4, triclinic (P), a = 10.3094(10) A, b =12.1196(12) A, c = 14.8146(15) A, alpha = 105.939(2) degrees , beta = 105.383(2) degrees , gamma = 93.525(2) degrees , V = 1698.0(3) A3, Z = 2; cis-[Re(V)O(PEt2Ph)(acac2pn)]PF6 (H35C23N2O3PRe.PF6), 5, monoclinic (P2(1)/n), a = 18.1183(18) A, b = 11.580(1) A, c = 28.519(3) A, beta = 101.861(2) degrees , V = 5855.9(10) A(3), Z = 4.     

Olefin metatheses in metal coordination spheres: versatile new strategies for the construction of novel monohapto or polyhapto cyclic, macrocyclic, polymacrocyclic, and bridging ligands

The broad applicability of the title reaction is established through studies of neutral and charged, coordinatively saturated and unsaturated, octahedral and square planar rhenium, platinum, rhodium, and tungsten complexes with cyclopentadienyl, phosphine, and thioether ligands which contain terminal olefins. Grubbs' catalyst, [Ru(=CHPh)(PCy3)2(Cl)2], is used at 2-9 mol% levels (0.0095-0.00042 M, CH2-Cl2). Key data are as follows: [(eta5-C5H4(CH2)6CH=CH2)Re(NO)(PPh3)-(CH3)], intermolecular metathesis (95 %); [(eta5-C5H5)Re(NO)(PPh3)(E(CH2CH=CH2)2)]+ TfO (E=S, PMe, PPh), formation of five-membered heterocycles (96-64%; crystal structure E = PMe); [(eta5-C5Me5)Re(NO)(PPh((CH2)6CH=CH2)2)(L)]n+ nBF4-(L/n = CO/1, Cl/0), intramolecular macrocyclization (94-89%; crystal structure L= Cl); fac-[(CO)3Re(Br)(PPh2(CH2)6CH=CH2)2] and cis-[(Cl)2Pt(PPh2(CH2)6CH=CH2)2], intramolecular macrocyclizations (80-71%; crystal structures of each and a hydrogenation product); cis-[(Cl)2Pt(S(R)(CH2)6CH= CH2)2], intra-/intermolecular macrocyclization (R=Et, 55%/24%; tBu, 72%/ <4%); trans-[(Cl)(L)M(PPh2(CH2)6CH=CH2)2] (M/L = Rh/CO, Pt/C6F5) intramolecular macrocyclization (90-83%; crystal structure of hydrogenation product, M=Pt); fac-[W(CO)3(PPh((CH2)6CH=CH2)2)3], intramolecular trimacrocyclization (83 %) to a complex mixture of triphosphine, diphosphine/ monophosphine, and tris(monophosphine) complexes, from which two isomers of the first type are crystallized. The macrocycle conformations, and basis for the high yields, are analyzed.     

A series of [3 + 2] cycloaddition products from the reaction of rhenium oxo complexes with diphenyl ketene

The reaction of rhenium (VII) trioxo complexes containing the ligand sets scorpionate, [HB(pz)3]ReO3 (6), [Ph-B(pz)3]ReO3 (7), and [[HC(pz)3]ReO3][ReO4] (8) and pyridine/pyridine-type ligands [(4,7-diphenyl-1,10-phen)(Br)ReO3] (12), [(4,4'-di-tert-butyl-2,2'-dipyridyl)(Cl)ReO3] (13), and [(py)2Re(Cl)O3] (4), with diphenyl ketene, has led to the isolation of six novel [3 + 2] cycloaddition products. These air-stable solids 9-11 and 15-17 are the result of [3 + 2] addition of the O=Re=O motif across the ketene C=C double bond. Five of the six [3 + 2] cycloaddition products have been structurally characterized by single-crystal X-ray diffraction and in all cases by 13C NMR and IR spectroscopies.     

Synthesis of cationic rhenium(VII) oxo imido complexes and their tunability towards oxygen atom transfer

A facile method is described for the synthesis of cationic Re(VII) cis oxo imido complexes of the form [Re(O)(NAr)(salpd)+] (salpd = N,N'-propane-1,3-diylbis(salicylideneimine)), 4, [Re(O)(NAr)(saldach)+] (saldach = N,N'-cyclohexane-1,3-diylbis(salicylideneimine)), 5, and [Re(O)(NAr)(hoz)2+] (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline) (Ar = 2,4,6,-(Me)C(6)H(2); 4-(OMe)C(6)H(4); 4-(Me)C(6)H(4); 4-(CF3)C6H4; 4-MeC(6)H(4)SO(2)), 6, from the reaction of oxorhenium(V) [(L)Re(O)(Solv)+] (1-3) and aryl azides under ambient conditions. Unlike previously reported cationic Re(VII) dioxo complexes, these cationic oxo imido complexes can be obtained on a preparative scale, and an X-ray crystal structure of [Re(O)(NMes)(saldach)+], 5a, has been obtained. Despite the multiple stereoisomers that could arise from tetradentate ligation of salen ligands to rhenium, one major isomer is observed and isolated in each instant. The electronic rationalization for stereoselectivity is discussed. Investigation of the mechanism suggests that the reactions of Re(V) with aryl azides proceed through an azido adduct similar to the group 5 complexes of Bergman and Cummins. Treatment of the cationic oxo imido complexes with a reductant (PAr(3), PhSMe, or PhSH) results in oxygen atom transfer (OAT) and the formation of cationic Re(V) imido complexes. [(salpd)Re(NMes)(PPh(3))(+)] (7) and [(hoz)2Re(NAr)(PPh(3))(+)] (Ar = m-OMe phenyl) (9) have been isolated on a preparative scale and fully characterized including an X-ray single-crystal structure of 7. The kinetics of OAT, monitored by stopped-flow spectroscopy, has revealed rate saturation for substrate dependences. The different plateau values for different oxygen acceptors (Y) provide direct support for a previously suggested mechanism in which the reductant forms a prior-equilibrium adduct with the rhenium oxo (ReVII = O<--Y). The second-order rate constants of OAT, which span more than 3 orders of magnitude for a given substrate, are significantly affected by the electronics of the imido ancillary ligand with electron-withdrawing imidos being most effective. However, the rate constant for the most active oxo imido rhenium(VII) is 2 orders of magnitude slower than that observed for the known cationic dioxo Re(VII) [(hoz)2Re(O)(2)(+)].     

Influence of ligand polarizability on the reversible binding of O2 by trans-[Rh(X)(XNC)(PPh3)2] (X = Cl, Br, SC6F5, C2Ph; XNC = xylyl isocyanide). Structures and a kinetic study

The complexes trans-[Rh(X)(XNC)(PPh 3) 2] (X = Cl, 1; Br, 2; SC 6F 5, 3; C 2Ph, 4; XNC = xylyl isocyanide) combine reversibly with molecular oxygen to give [Rh(X)(O 2)(XNC)(PPh 3) 2] of which [Rh(SC 6F 5)(O 2)(XNC)(PPh 3) 2] ( 7) and [Rh(C 2Ph)(O 2)(XNC)(PPh 3) 2] ( 8) are sufficiently stable to be isolated in crystalline form. Complexes 2, 3, 4, and 7 have been structurally characterized. Kinetic data for the dissociation of O 2 from the dioxygen adducts of 1- 4 were obtained using (31)P NMR to monitor changes in the concentration of [Rh(X)(O 2)(XNC)(PPh 3) 2] (X = Cl, Br, SC 6F 5, C 2Ph) resulting from the bubbling of argon through the respective warmed solutions (solvent chlorobenzene). From data recorded at temperatures in the range 30-70 degrees C, activation parameters were obtained as follows: Delta H (++) (kJ mol (-1)): 31.7 +/- 1.6 (X = Cl), 52.1 +/- 4.3 (X = Br), 66.0 +/- 5.8 (X = SC 6F 5), 101.3 +/- 1.8 (X = C 2Ph); Delta S (++) (J K (-1) mol (-1)): -170.3 +/- 5.0 (X = Cl), -120 +/- 13.6 (X = Br), -89 +/- 18.2 (X = SC 6F 5), -6.4 +/- 5.4 (X = C 2Ph). The values of Delta H (++) and Delta S (++) are closely correlated (R (2) = 0.9997), consistent with a common dissociation pathway along which the rate-determining step occurs at a different position for each X. Relative magnitudes of Delta H (++) are interpreted in terms of differing polarizabilities of ligands X.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Rhenium and technetium complexes with N,N-dialkyl-N'-benzoylthioureas

N,N-Dialkyl-N'-benzoylthioureas, HR(1)R(2)btu, react under single deprotonation and form air-stable chelate complexes with common rhenium or technetium complexes such as (NBu(4))[MOCl(4)] (M = Re, Tc) or [ReOCl(3)(PPh(3))(2)]. Compositions and molecular structures of the products are strongly dependent on the precursors used and the reaction conditions applied. Reactions with [ReOCl(3)(PPh(3))(2)] in CH(2)Cl(2) give complexes of the general formula [ReOCl(2)(R(1)R(2)btu)(PPh(3))] (3), with the benzoyl oxygen atom of the chelating benzoylthiourea being trans to the oxo ligand, and/or Re(III) complexes of the composition [ReCl(2)(R(1)R(2)btu)(PPh(3))(2)] (4) with the PPh(3) ligands in trans positions to each other. In polar solvents such as MeOH, EtOH or acetone, corresponding reactions without addition of a supporting base only result in intractable brown solutions, from which no crystalline complexes could be isolated. The addition of NEt(3), however, allows the isolation of the bis-chelates [ReOCl(R(1)R(2)btu)(2)] (1) in good yields. In this type of complex, one of the chelating R(1)R(2)btu- ligands coordinates equatorially, while the second occupies the position trans to the oxo ligand with its oxygen atom. The latter compounds can also be prepared from (NBu(4))[ReOCl(4)] in MeOH when no base is added, while the addition of NEt(3) results in the formation of [ReO(OMe)(R(1)R(2)btu)(2)] (5) complexes with the methoxo ligand trans to O(2-). Compounds of the type 5 can alternatively be prepared by heating 1 in MeOH with addition of NEt(3). A reversible conversion of 5 into oxo-bridged dimers of the composition [{ReO(R(1)R(1)btu)(2)}(2)O] (6) is observed in water-containing solvents. Starting from (NBu(4))[TcOCl(4)], a series of technetium complexes of the type [TcOCl(R(1)R(2)btu)(2)] (2) could be prepared. The structures of such compounds are similar to those of the rhenium analogues 1. Reduction of 2 with PPh(3) in CH(2)Cl(2) gives Tc(III) complexes of the composition [TcCl(R(1)R(2)btu)(2)(PPh(3))] (7) having the chloro and PPh(3) ligands in cis positions. When this reaction is performed in the presence of excess chelating ligand, the Tc(III) tris-chelates [Tc(R(1)R(2)btu)(3)] (8) are formed.     

Re(V) and Re(III) complexes with sal2phen and triphenylphosphine: rearrangement, oxidation and reduction

Reactions of Re(V), tetradentate Schiff base complexes with tertiary phosphines have previously yielded both rearranged Re(V) and reduced Re(III) complexes. To further understand this chemistry, the rigid diiminediphenol (N(2)O(2)) Schiff base ligand sal(2)phen (N,N'-o-phenylenebis(salicylaldimine)) was reacted with (n-Bu(4)N)[ReOCl(4)] to yield trans-[ReOCl(sal(2)phen)] (1). On reaction with triphenylphosphine (PPh(3)), a rearranged Re(V) product cis-[ReO(PPh(3))(sal(2)phen*)]PF(6) (2), in which one of the imines was reduced to an amine during the reaction, and the reduced Re(III) products trans-[ReCl(PPh(3))(sal(2)phen)] (4) and trans-[Re(PPh(3))(2)(sal(2)phen)](+) (5) were isolated. Reaction of sal(2)phen with [ReCl(3)(PPh(3))(2)(CH(3)CN)] resulted in the isolation of [ReCl(2)(PPh(3))(2)(salphen)] (3). The compounds were characterized using standard spectroscopic methods, elemental analyses and single crystal X-ray crystallography.     

Chelated hydrazido(3-)rhenium(V) complexes: on the way to the nitrido-M(V) core (M = Tc, Re)

Neutral and asymmetrical hydrazido(3-)rhenium(V) heterocomplexes of the type [Re(eta(2)-L(4))(L(n))(PPh(3))] (eta(2)-L(4) = NNC(SCH(3))S; H(2)L(1) = S-methyl beta-N-((2-hydroxyphenyl)ethylidene)dithiocarbazate, 1, H(2)L(2) = S-methyl beta-N-((2-hydroxyphenyl)methylidene)dithiocarbazate, 2) are prepared via ligand-exchange reactions in ethanolic solutions starting from [Re(V)(O)Cl(4)](-) in the presence of PPh(3) or from [Re(V)(O)Cl(3)(PPh(3))(2)]. The distorted octahedral coordination sphere of these compounds is saturated by a chelated hydrazido group, a facially ligated ONS Schiff base, and PPh(3). Reduction-substitution reactions starting from [NH(4)][Re(VII)O(4)] in acidic ethanolic mixtures containing PPh(3) and H(2)L(n) (or its dithiocarbazic acid precursor H(3)L(4)) produce another example of chelated hydrazido(3-) rhenium(V) derivative, namely [Re(eta(2)-L(4))Cl(2)(PPh(3))(2)], 3. On the contrary, the N-methyl-substituted dithiocarbazic acid H(2)L(3) reacts with perrhenate to give the known nitrido complex [Re(N)Cl(2)(PPh(3))(2)]. Rhenium(V) complexes incorporating the robust eta(2)-hydrazido moiety represent key intermediates helpful for the comprehension of the reaction pathway which generates nitridorhenium(V) species starting from oxo precursors. An essential requirement for the stabilization of such chelated hydrazido-Re(V) units is the triple deprotonation at the hydrazine nitrogens, thereby providing efficient pi-electron circulation in the resulting five-membered ring. The thermal stability of these units is affected by the nature of the anchoring donor, thione sulfur ensuring stronger chelation than nitrogen and oxygen. The eta(2)-hydrazido complexes are characterized by conventional physicochemical techniques, including the X-ray crystal structure determination of 1 and 3.     

Synthesis, characterization, and stereochemistry of oxorhenium(V) complexes with 2-aminoethanethiolate

A series of oxorhenium(V) complexes with 2-aminoethanethiolate (aet), [ReO(aet-N,S)(D-pen-N,O,S)] (2), [[ReO(aet-N,S)(2)](2)O] (3), [ReO(Cl)(aet-N,S)(2)] (4), and [ReO(aet-N,S)(Haet-S)(2)]Cl(2) ([5]Cl(2)) was newly prepared starting from ReO(4)(-). The reaction of NH(4)ReO(4) with a 1:1 mixture of Haet.HCl and D-H(2)pen (D-penicillamine) in the presence of SnCl(2).2H(2)O in water gave 2, 3, and the known complex [ReO(D-Hpen-N,S)(D-pen-N,O,S)] (1). These complexes were fractionally precipitated by controlling the pH of the reaction solution. The complex 2 was also prepared in a higher yield by a similar reaction using methanol as a solvent. The crystal structure of 2 was determined by X-ray crystallography; 2 crystallizes in the tetragonal space group P4(3) with a = 9.621(1), c = 12.911(1) A, V = 1195.0(3) A(3), and Z = 4. The oxorhenium(V) core in 2 is coordinated by a bidentate-N,S aet ligand and a tridentate-N,O,S D-pen ligand, having a distorted octahedral geometry with a cis-N cis-S configuration in the equatorial plane perpendicular to the O-Re-O axis. The 1:2 reaction of NH(4)ReO(4) with Haet.HCl in the presence of SnCl(2).2H(2)O in methanol produced 4, which is interconvertible with 3, while the corresponding 1:3 reaction resulted in the isolation of [5]Cl(2). The complexes 4 and 5 were also structurally characterized; 4 crystallizes in the monoclinic space group P2(1)/c with a = 6.839(1), b = 10.0704(6), c = 14.1075(8) A, beta = 91.729(8) degrees, V = 971.2(2) A(3), and Z = 4, while [5]Cl(2) crystallizes in the triclinic space group P1 with a = 11.938(3), b = 12.366(3), c = 5.819(1) A, alpha = 102.71(2), beta = 101.28(2), gamma = 75.41(2) degrees, V = 802.0(3) A(3), and Z = 2. In 4, the oxorhenium(V) core is octahedrally coordinated by two bidentate-N,S aet ligands, which form a cis-N cis-S configurational equatorial plane with a Cl(-) ion trans to the oxo ligand. On the other hand, the oxorhenium(V) core in [5](2+) is coordinated by one bidenate-N,S aet and two monodentate-S Haet ligands, having a distorted trigonal-bipyramidal geometry with S and N donors at the apical positions.     

A new family of chelating diphosphines with a transition metal stereocenter in the backbone: novel applications of "chiral-at-rhenium" complexes in rhodium-catalyzed enantioselective alkene hydrogenations

The title compounds are accessed by sequences starting with racemic and enantiomerically pure [(eta5-C5H5)Re(NO)(PPh3)(CH3)]. Reactions with chlorobenzene/HBF4, PPh2H, and tBuOK give the phosphido complex [(eta5-C5H5)Re(NO)(PPh3)(PPh2)] (3). Reactions with Ph3C+ BF4-, PPh2H, and tBuOK give the methylene homologue [(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] (9). Treatment of 3 or 9 with nBuLi or tBuLi and then PPh3Cl gives the diphosphido systems [(eta5-C5H4PPh2)Re(NO)(PPh3)((CH2)nPPh2)] (n = 0/1, 5/11). Reactions of 5 and 11 with [Rh(NBD)Cl]2/AgPF6 (NBD = norbornadiene) give the rhenium/rhodium chelate complexes [(eta5-C5H4PPh2)Re(NO)(PPh3)((mu-CH2)nPPh2)Rh(NBD)]+ PF6- (n = 0/1, 6+/12+ PF6-; 30-32% overall from commercial Re2(CO)10). The crystal structures of 6+ PF6- and 12+ PF6- are compared to those of 3 and 9, and other rhodium complexes of chelating bis(diphenylphosphines). The chiral pockets defined by the PPh2 groups show unusual features. Four alkenes of the type (Z)-RCH=C(NHCOCH3)CO2R' are treated with H2 (1 atm) and (R)-6+ PF6- or (S)-12+ PF6- (0.5 mol%) in THF at room temperature. Protected amino acids are obtained in 70-98% yields and 93-82% ee [(R)-6- PF6-] or 72-60% ee [(S)-12+ PF6-]. Pressure and temperature effects are defined, and turnover numbers of > 1600 are realized.