Binding of SO2 by Synthetic Substituted Apatites

The reaction of SO₂ with synthetic apatites was studied by TG, XRD and IR analyses at 400-1000°C. Due to an interaction of apatite with SO₂, destruction of apatite and formation of CaSO₄ and diphosphate up to 750°C takes place. The further calcination leads to the formation of β-Ca₃(PO₄)₂ and a part of the SO₂ bound is lost again. The amount of SO₂ bound with apatite at calcination depends on the substitution ((F^- ↔ OH^-, PO₄ ^3- ↔ CO₃ ^2-, Ca²⁺ ↔ Mg²⁺) in its structure. This revised version was published online in July 2006 with corrections to the Cover Date.     

A thermal and structural study on Lanthanum Hexacyanocobaltate(III) pentahydrate,La[Co(CN)6]·5H2O. Part III

On dehydration of La[Co(CN)₆]·5H₂O, the color of the complex, changes from white to pale blue at around 230°C. Heating the pale blue specimen, the color changes to deep blue at around 290°C. This deep blue specimen is easily rehydrated to a pink one. As reported previously, in the pale blue specimen, Co³⁺ ions are situated in the center of the D_4h crystal field formed by six CN^- ions. The deep blue specimen is due to the presence of [Co(CN)₄]^2- ions in which Co²⁺ was situated in a T_d coordination field formed by four CN^- ions and the Co-C bond length is 1.67 Ĺ. The pink species corresponded to trans-[Co(CN)₄(H₂O)₂]^2- and the bond lengths of Co-C and Co-O are 1.89 and 1.85 Ĺ, respectively. The Raman spectra of the complex observed at 25°C displays two bands at 2157 and 2176 cm^-1 associated with the vibration of C-N bond, and the band of 2157 cm^-1 was split into two bands, 2150 and 2156 cm^-1, at around 100°C. When the complex was heated to around 230°C, three new bands were observed at 2103, 2116 and 2141 cm-1. The bands of 2103 and 2116 cm^-1 were assigned to the stretching vibration of C=N bonding to Co²⁺. The band of 2141 cm^-1 was assigned to the stretching vibration of the inverted CN^- as follows: Co-C=N-La→Co-N=C-La. The activation energy for the inversion of CN^- was estimated as 67 kJ mol^-1. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solvent extraction of lead using a nitrobenzene solution of strontium dicarbollylcobaltate in the presence of polyethylene glycol PEG 400

Summary From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Pb²⁺(aq)+SrL²⁺ (nb)↔PbL²⁺ (nb)+Sr²⁺ (aq) taking place in the two-phase water-nitrobenzene system (L=PEG 400; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as logK_ex(Pb²⁺, SrL²⁺)=2.0±0.1. Further, the stability constant of the PEG 400 - lead complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β_nb(PbL²⁺)=12.9±0.1.     

Existence region, structure, and properties of YBa(Cu1? x Fe x )2O5+δ and (Y1? y Ba y )2 CuFeO5+δ solid solutions

We study the effect of Y³⁺ ↔ Ba²⁺ and Cu²⁺ ↔ Fe³⁺ substitutions on the structure, thermal expansion, electrical conductivity, and thermal e.m.f. of layered ferrocuprate YBaCuFeO_{5 + δ} · YBa(Cu_1−x Fe _x )₂O_{5 + δ} solid solutions with 0.45≤x≤0.55 are formed. The unit cell parameters, thermal expansivity, and oxygen nonstoichiometry index of the YBaCuFeO_{5 +δ} phase (δ) are almost independent of variations in the cationic composition of this phase. The electrical conductivity of layered yttrium barium ferrocuprate increases, whereas the activation energy of conductivity decreases in response to Ba²⁺ → Y³⁺ and Cu²⁺ → Fe³⁺ substitutions (with increasing copper(III) proportion in samples). The thermal e.m.f. of ceramics decreases when composition deviates from the cationic stoichiometry (YBaCuFeO_{5 +δ}). Original Russian Text ? A.I. Klyndyuk, E.A. Chizhova, V.M. Kononovich, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 10, pp. 1672–1676.     

离子对UIO-66-2OH光催化性能的影响

实际废水中存在的离子会对有机污染物的光催化降解产生影响。以ZrCl₄和2,5-二羟基对苯二甲酸为原料,通过水热合成法成功制备了金属有机骨架材料UIO-66-2OH。通过红外（IR）、X射线粉末衍射（XRD）、X射线光电子能谱（XPS）和扫描电子显微镜（SEM）对UIO-66-2OH的结构进行表征。利用水中常见的金属阳离子和无机阴离子,探索UIO-66-2OH的光催化性能。研究发现,金属阳离子Fe³⁺和无机阴离子HCO₃^-、CO₃^2-可以加快光催化降解的速度。然而,金属离子Na⁺、K⁺、Ca²⁺、Mg²⁺、Cu²⁺和无机阴离子Cl^-、SO₄^2-、PO₄^3-会抑制光催化性能,且离子价态越高,抑制效果越明显。     

Generation of diazo-2-methylenecyclopropane and its 1,3-dipolar cycloaddition to acrylates

N-(2-Methylenecyclopropyl)-N-nitrosourea (2) was synthesized for the first time (yield 70%) and its decomposition induced by bases was studied. In particular, treatment with MeONa/MeOH at-30°C in the presence of methyl methacrylate gives the corresponding I-pyrazoline stereoisomers, the products of [3+2]-cycloaddition of diazo-2-methylene-cyclopropane (1) generatedin situ. Decomposition of2 on treatment with K₂CO₃ at 0–5°C in the presence of acrylonitrile also proceeds as [3+2]-cycloaddition: however, the expected 2-pyrazoline easily isomerizes into 5(3)-isopropenyl-3(5)-cyanopyrazole. Buta1,2,3-triene is the main product of base-induced decomosition of2 in the absence of unsaturated substrates. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1210–1214, July, 2000.     

Eu,Dy co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphors prepared by sol–gel-combustion processing

SrAl₂O₄:Eu²⁺, Dy³⁺ powders were synthesized by sol–gel–combustion process using metal nitrates as the source of metal ions and citric acid as a chelating agent of metal ions. The amounts of citric acid in mole were two times those of the metal ions. By tracing the formation process of the sol–gel, it is found that decreasing the amount of NO₃ ⁻ in the solution is necessary for the formation of transparent sol and gel, and the dropping of ethanol into the precursor solution can decrease the amount of NO₃ ⁻ in the solution. By combusting citrate sol at 600 °C, followed by heating the resultant combustion ash at 1,100–1,300 °C in a weak reductive atmosphere containing active carbon, SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors can prepared. X-ray diffraction, Thermogravimetry–differential thermal analysis, scanning electron microscopy and fluorescence spectrophotometer were used to investigate the formation process and luminescent properties of the as-synthesized SrAl₂O₄:Eu²⁺, Dy³⁺. The results reveal that the SrAl₂O₄ crystallizes completely when the combustion ash was sintered at 1,200–1,300 °C. The excitation and emission spectra indicate that excitation broadband mainly lies in a visible range and the phosphors emit strong light at 510 nm under the excitation of 348 nm. The afterglow of phosphors lasts for over 10 h when the excited source is cut off.     

Solubility in the 2KNO3 + MgCl2 ? 2KCl + Mg(NO3)2-H2O system

Solubility in the 2KNO₃ + MgCl₂ ↔ 2KCl + Mg(NO₃)₂-H₂O four-component reciprocal system was studied for the first time at 25 and 50°C in order to determine the feasibility of preparing potassium nitrate and magnesium chloride at near-ambient temperatures.     

Phase Diagram of R(+)-S(-) Efaroxan Hydrochloride

The phase diagram of R(+)-S(-) efaroxan hydrochloride (T_fus.(R)=245.1±0.3°C. ΔH_fus.(R)=119.6±3.0 J g^-1) shows a racemic compound. The melting temperature and melting enthalpy of the compound are: T_fus.(RS)=247.8±0.2°C and ΔH_fus. (RS)=124.6±2.4 J g^-1. A solid ↔ solid transformation takes place at T_trs.=180±1°C, ΔH_trs.=15.0±0.4 J g^-1. This transition is observed between 3 and 97% R(+). The stability of the racemic compound already established in a previous study was confirmed by the value of Petterson's coefficient (i=1.19). The two eutectic positions at 20 and 80% R(+) that define the range over which the racemic compound is found, exclude the use of resolution methods by preferential crystallization. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ion-pair extraction of transition metal cations from aqueous media using novel N2O2-macrocyclic crown ligands

Three new macrocyclic crown ether ligands containing nitrogen–oxygen donor atoms were designed and synthesized from 1,4-bis(2′-formylphenyl)-1,4-dioxabutane and 4-nitro-o-phenylenediamine. Ion-pair extraction of metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Pb²⁺ from aqueous phase to the organic phase was carried out using the novel ligands. The solvent effect over the metal picrate extractions was investigated at 25 ± 0.1 °C by using UV–visible spectrometry. The extractability and the values of the extraction constants (log K_ex) were determined for the extracted complexes.     

Purification and Characterization of a Hyperthermostable and High Maltogenic α-Amylase of an Extreme Thermophile <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis>

The purified α-amylase of Geobacillus thermoleovorans had a molecular mass of 26 kDa with a pI of 5.4, and it was optimally active at 100 °C and pH 8.0. The T _1/2 of α-amylase at 100 °C increased from 3.6 to 5.6 h in the presence of cholic acid. The activation energy and temperature quotient (Q ₁₀) of the enzyme were 84.10 kJ/mol and 1.31, respectively. The activity of the enzyme was enhanced strongly by Co²⁺ and Fe²⁺; enhanced slightly by Ba²⁺, Mn²⁺, Ni²⁺, and Mg²⁺; inhibited strongly by Sn²⁺, Hg²⁺, and Pb²⁺, and inhibited slightly by EDTA, phenyl methyl sulfonyl fluoride, N-ethylmaleimide, and dithiothreitol. The enzyme activity was not affected by Ca²⁺ and ethylene glycol-bis (β-amino ethyl ether)-N,N,N,N-tetra acetic acid. Among different additives and detergents, polyethylene glycol 8000 and Tween 20, 40, and 80 stabilized the enzyme activity, whereas Triton X-100, glycerol, glycine, dextrin, and sodium dodecyl sulfate inhibited to a varied extent. α-Amylase exhibited activity on several starch substrates and their derivatives. The K _m and K _cat values (soluble starch) were 1.10 mg/ml and 5.9 × 10³ /min, respectively. The enzyme hydrolyzed raw starch of pearl millet (Pennisetum typhoides) efficiently.     

Sol-Gel Processing of Sm2+-Doped Glass and Its Spectral Hole Burning at Room Temperature

The sol-gel process was applied to the preparation of Sm²⁺ ion-doped silicate glasses, which show persistent spectral hole burning at room temperature. The gels synthesized by the hydrolysis of metal alkoxides and SmCl₃·6H₂O were heated in air at 500°C, were then reacted with H₂ gas to form the Sm²⁺ ion. The Al₂O₃−SiO₂2 glasses are appropriate to reduce the Sm³⁺ ion with H₂ gas and show intense photoluminescence of Sm²⁺ ion. Persistent spectra hole burning was observed in the excitation spectrum for the⁷F₀→⁵D₀ transition of the Sm²⁺ ion by the irradiation of DCM dye laser. The hole width and depth were ∼16 cm⁻¹ and ∼10% of the total intensity, respectively, at 20°C.     

An Oxidant- and Organic Solvent-Resistant Alkaline Metalloprotease from Streptomyces olivochromogenes

Organic solvent- and detergent-resistant proteases are important from an industrial viewpoint. However, they have been less frequently reported and only few of them are from actinomycetes. A metalloprotease from Streptomyces olivochromogenes (SOMP) was purified by ion exchange with Poros HQ and gel filtration with Sepharose CL-6B. Apparent molecular mass of the enzyme was estimated to be 51 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and gelatin zymography. The activity was optimum at pH 7.5 and 50 °C and stable between pH 7.0 and 10.0. SOMP was stable below 45 °C and Ca²⁺ increased its thermostability. Ca²⁺ enhanced while Co²⁺, Cu²⁺, Zn²⁺, Mn²⁺, and Fe²⁺ inhibited the activity. Ethylenediaminetetraacetic acid and ethylene glycol-bis (β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid, but not phenylmethylsulfonyl fluoride, aprotinin, and pefabloc SC, significantly suppressed the activity, suggesting that it might be a metalloprotease. Importantly, it is highly resistant against various detergents, organic solvents, and oxidizing agents, and the activity is enhanced by H₂O₂. The enzyme could be a novel protease based on its origin and peculiar biochemical properties. It may be useful in biotechnological applications especially for organic solvent-based enzymatic synthesis.     

Kinetics and mechanism of the reactions of hexaaqua rhodium (III) with sulphur (IV) in aqueous medium

An O-bonded sulphito complex, Rh(OH₂)₅(OSO₂H)²⁺, is reversibly formed in the stoppedflow time scale when Rh(OH₂) ₆ ³⁺ and SO₂/HSO ₃ ⁻ buffer (1 <pH< 3) are allowed to react. For Rh(OH₂)₅OH₂₊+ SO₂ □ Rh(OH₂)₅(OSO₂H)²⁺ (k₁/k_-1), k₁ = (2.2 ±0.2) × 10³ dm³ mol⁻¹ s⁻¹, k₋1 = 0.58 ±0.16 s⁻¹ (25°C,I = 0.5 mol dm⁻³). The protonated O-sulphito complex is a moderate acid (K _d = 3 × 10⁻⁴ mol dm⁻³, 25°C, I= 0.5 mol dm⁻³). This complex undergoes (O, O) chelation by the bound bisulphite withk= 1.4 × 10⁻³ s⁻¹ (31°C) to Rh(OH₂)₄(O₂SO)⁺ and the chelated sulphito complex takes up another HSO ₃ ⁻ in a fast equilibrium step to yield Rh(OH₂)₃(O₂SO)(OSO₂H) which further undergoes intramolecular ligand isomerisation to the S-bonded sulphito complex: Rh(OH₂)₃(O₂SO)(OSO₂)^- → Rh(OH₂)₃(O₂SO)(SO₃)⁻ (k _iso = 3 × 10⁻⁴ s⁻¹, 31°C). A dinuclear (μ-O, O) sulphite-bridged complex, Na₄[Rh₂(μ-OH)₂(OH)₂(μ-OS(O)O)(O₂SO)(SO₃) (OH₂)]5H₂O with (O, O) chelated and S-bonded sulphites has been isolated and characterized. This complex is sparingly soluble in water and most organic solvents and very stable to acid-catalysed decomposition     

Glycosidases of turnip leaf tissues

Four myrosinase (β-thioglucosidase EC. 3.2.3.1) and seven disaccharase (β-fructofuranosidase, EC. 3.2.1.26) isoenzymes were isolated from turnip leaves. The most active enzymes were isolated in pure form. Myrosinase and disaccharase mol wt was 62.0 × 10³ and 69.5 × 10³ dalton, respectively, on the basis of gel filtration on Sephadex G-200. Myrosinase pH profile showed high activity between pH 5 and 7 with the optimum at pH 5.5. The purified enzyme was heat-stable for 60 min at 30°C with only loss of 24% of activity. Its activity is strongly inhibited (100%) by Pb²⁺, Ba²⁺, Cu²⁺ and Ca²⁺ ions, and activated (70%) by EDTA at 0.04M. The pure enzyme failed to hydrolyze amylose, glycogen, lactose, maltose, and sucrose. TheK _m andV _max values of myrosinase using sinigrin as specific substrate was 0.045 mM and 2.5 U, respectively. The maximal activity of disaccharase enzyme was obtained at pH 4–5 and 35–37°C. The enzyme was heat-stable at 30°C for 30 min with only 10% loss of its activity. Its activity is strongly activated (70–240%) by Ca²⁺, Ba²⁺, Cu²⁺, and EDTA at 0.01M. The enzyme activity is specific to the disaccharide sucrose and failed to hydrolyze other disaccharides (maltose and lactose). TheK _m andV _max of disaccharase were 0.123 mM and 3.33 U, respectively.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Electrochemical redox reactions studied in frozen tetrabutylammonium halide hydrates

The electrochemical redox reactions: Fe(CN)₆ ⁴⁻−e⁻↔ Fe(CN)₆ ³⁻, Ru(NH₃)₆ ³⁺+e⁻↔ Ru (NH₃)₆ ²⁺ and Fc(CH₂OH)₂−e⁻↔ Fc(CH₂OH)₂ ⁺ (Fc–ferrocene) were investigated in tetrabutylammonium halide hydrates at temperatures below and above the electrolyte melting point. They were studied by cyclic voltammetry, potential step chronoamperometry and impedance spectroscopy. Freezing of the electrolyte affects both the shape and position of the cyclic voltammogram on the potential scale. Also the shapes of the current-time relationship and the impedance spectra change at temperatures below the melting point. It has been proposed that this behaviour is caused by slow transport of the reactant and the heterogeneous nature of the electrolyte. The activation energies of reactant transport are about four times larger in frozen electrolytes than those in liquid. It has been concluded that reactant transport is restricted to the intergrain space of the electrolyte. Received: 16 December 1997 / Accepted: 10 February 1998     

The PVT properties of concentrated aqueous electrolytes IX. The volume properties of KCl and K2SO4 and their mixtures with NaCl and Na2SO4 as a function of temperature

The densities of KCl and K₂SO₄ were measured from dilute solutions to saturation from 5 to 95°C. The data were combined with literature data to produce density and apparent molal volume, V_φ, equations from 0 to 100°C and to saturation. The standard deviations of the density equations were 30×10⁻⁶ g-cm⁻³ and 32×10⁻⁶ g-cm⁻³, respectively, for KCl and K₂SO₄. Pitzer equations were used to fit the V_φ data. The resulting infinite dilute partial molal volumes, V^o, were in reasonable agreement with literature data. The densities of the mixtures of the six combinations of the salts KCL, K₂SO₄ NaCl and Na₂SO₄ were measured at I=2.0 and t=5, 25, 55 and 95°C. The resulting volumes of mixing were fitted to equations of the form

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

Luminescence of Cr3+ in natural and calcined diaspore

The luminescence of Cr³⁺ in natural and calcined diaspore is applied to probe structural properties of the phases. Steady-state luminescence spectra of the natural diaspore [a-AlO(OH)] are typical of 2E→4A2 transitions of Cr³⁺ luminescence centers (R-lines) substituting for Al³⁺ in six-fold coordination. The dehydroxylated phase of the diaspore is characterized by a low degree of crystallinity. This phase is not detectable by XRD and Raman spectroscopy up to 900°C. The time-resolved luminescence spectra of the diaspore treated at 900°C showed two variations: the first is an R-line of Cr3+ luminescence in octahedral sites with a strong crystal field in a very disordered environment, and the second is a broad band of Cr³⁺ luminescence in weaker crystal field sites. The crystalline phase of corundum [a-Al₂O₃] is detected by XRD and Raman spectroscopy after treating the diaspore at 1000°C and above (up to 1300°C). The lines in the spectrum of the diaspore treated at this temperature are typical of Cr³⁺ luminescence centers (R-lines) in Cr-corundum (ruby) structure. This revised version was published online in July 2006 with corrections to the Cover Date.