Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

Thermodynamics of the hydrolysis reactions of adenosine 3′,5′-(cyclic)phosphate(aq) and phosphoenolpyruvate(aq); the standard molar formation properties of 3′,5′-(cyclic)phosphate(aq) and phosphoenolpyruvate(aq)

Molar calorimetric enthalpy changes Δ_rH_m(cal) have been measured for the biochemical reactions {cAMP(aq) + H₂O(l)=AMP(aq)} and {PEP(aq) + H₂O(l)=pyruvate(aq) + phosphate(aq)}. The reactions were catalyzed, respectively, by phosphodiesterase 3^′,5^′-cyclic nucleotide and by alkaline phosphatase. The results were analyzed by using a chemical equilibrium model to obtain values of standard molar enthalpies of reaction Δ_rH_m^∘ for the respective reference reactions {cAMP⁻(aq) + H₂O(l)=HAMP⁻(aq)} and {PEP³⁻(aq) + H₂O(l)=pyruvate⁻(aq) + HPO²⁻₄(aq)}. Literature values of the apparent equilibrium constants K^′ for the reactions {ATP(aq)=cAMP(aq) + pyrophosphate(aq)}, {ATP(aq) + pyruvate(aq)=ADP(aq) + PEP(aq)}, and {ATP(aq) + pyruvate(aq) + phosphate(aq)=AMP(aq) + PEP(aq) + pyrophosphate(aq)} were also analyzed by using the chemical equilibrium model. These calculations yielded values of the equilibrium constants K and standard molar Gibbs free energy changes Δ_rG_m^∘ for ionic reference reactions that correspond to the overall biochemical reactions. Combination of the standard molar reaction property values (K, Δ_rH_m^∘, and Δ_rG_m^∘) with the standard molar formation properties of the AMP, ADP, ATP, pyrophosphate, and pyruvate species led to values of the standard molar enthalpy Δ_fH_m^∘ and Gibbs free energy of formation Δ_fG_m^∘ and the standard partial molar entropy S_m^∘ of the cAMP and PEP species. The thermochemical network appears to be reasonably well reinforced and thus lends some confidence to the accuracy of the calculated property values of the variety of species involved in the several reactions considered herein.     

Thermodynamic studies on protonation constant of adenosine and guanosine at different temperatures and ionic strengths

Stepwise protonation constants of two purine nucleosides (adenosine and guanosine) were determined at different temperatures (293.15 to 308.15) and various ionic strengths (0.101 to 3.503 mol · kg⁻¹ NaClO₄) using a combination of potentiometric and spectrophotometric method. The thermodynamic parameters (i.e. enthalpy change, ΔH, and entropy change, ΔS) of the protonations were calculated at different temperatures using van’t Hoff and virial equations. The dependence of the protonation constant on ionic strength is modeled by a Debye–Hückel type equation and discussed. Finally, the protonation constants of the nucleosides and the enthalpy change of protonations were determined at zero ionic strength.     

Vapour pressure of diethyl phthalate

Measurements of vapour pressure in the liquid phase and of enthalpy of vaporisation and results of calculation of ideal-gas properties for diethyl phthalate are reported. The method of comparative ebulliometry, the static method, and the Knudsen mass-loss effusion method were employed to determine the vapour pressure. A Calvet-type differential microcalorimeter was used to measure the enthalpy of vaporisation. Simultaneous correlation of vapour pressure, of enthalpy of vaporisation and of difference in heat capacities of ideal gas and liquid/solid phases was used to generate parameters of the Cox equation that cover both the (vapour + solid) equilibrium (approximate temperature range from 220 K to 270 K) and (vapour + liquid) equilibrium (from 270 K to 520 K). Vapour pressure and enthalpy of vaporisation derived from the fit are reported at the triple-point temperature T = 269.92 K (p = 0.0029 Pa, Δ_vapH_m = 85.10 kJ · mol⁻¹ ), at T = 298.15 K (p = 0.099 Pa, Δ_vapH_m = 82.09 kJ · mol⁻¹), and at the normal boiling temperature T = 570.50 K (Δ_vapH_m = 56.49 kJ · mol⁻¹). Measured vapour pressures and measured and calculated enthalpies of vaporisation are compared with literature data.     

Equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures at temperatures from (278.15 to 323.15) K

The equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures was measured at elevated temperatures from (278.15 to 323.15) K using a steady-state method. With increasing temperatures, the solubility increases in aqueous solvent mixtures. The results of these results were regressed by a modified Apelblat equation. The dissolution entropy and enthalpy determined using the method of the least-squares and the change of Gibbs free energy calculated with the values of Δ_diffS^o and Δ_diffH^o at T = 278.15 K.     

Positron annihilation study of proton-irradiated reactor pressure vessel steels

The microstructures, irradiation-induced defects and changes of mechanical property of Chinese domestic A508-3 steels after proton irradiation were investigated by TEM, positron lifetime, slow positron beam Doppler broadening spectroscopy and hardness measurements. The defects were induced by 240 keV proton irradiation with fluences of 1.25×10¹⁷ ions cm^?2 (0.26 dpa), 2.5×10¹⁷ ions cm^?2 (0.5 dpa), and 5.0×10¹⁷ ions cm^?2 (1.0 dpa). The TEM observation revealed that the as-received steel had typical bainitic–ferritic microstructures. It was also observed that Doppler broadening S-parameter and average lifetime increased with dose level owing to the formation of defects and voids induced by proton irradiation. The correlation between positron parameters and hardness was found.     

Study on the enthalpy of solution and enthalpy of dilution for the ionic liquid [C3mim][Val] (1-propyl-3-methylimidazolium valine)

A new amino acid ionic liquid (AAIL) [C₃mim][Val] (1-propyl-3-methylimidazolium valine) was prepared by the neutralization method. Using the solution-reaction isoperibol calorimeter, molar solution enthalpies of the ionic liquid [C₃mim][Val] with known amounts of water and with different concentrations in molality were measured at T = 298.15 K. In terms of standard addition method (SAM) and Archer’s method, the standard molar enthalpy of solution for [C₃mim][Val] without water, ${\mathrm{\Delta }}_{\text{s}}{H}_{\text{m}}^{\circ }$ = (−55.7 ± 0.4) kJ · mol⁻¹, was obtained. The hydration enthalpy of the cation [C₃mim]⁺, ΔH₊ ([C₃mim]⁺) = −226 kJ · mol⁻¹, was estimated in terms of Glasser’s theory. Using the RD496-III heat conduction microcalorimeter, the molar enthalpies of dilution, Δ_DH_m(m_i → m_f), of aqueous [C₃mim][Val] with various values of molality were measured. The values of Δ_DH_m(m_i → m_f) were fitted to Pitzer’s ion-interaction model and the values of apparent relative molar enthalpy, ^φL, calculated using Pitzer’s ion-interaction model.     

Lattice enthalpies and magnetic loops in lanthanide iron garnets,Ln3Fe5O12

Experimental lattice enthalpies Δ_LH^θ of lanthanide iron garnets Ln₃Fe₅O₁₂ (LnIGs) with Ln = Ce − Lu, have been determined from the Born–Haber thermochemical cycle. The results have been compared with those reported by other authors using numerical simulation or an empirical equation. The lattice enthalpy of PmIG has been predicted by linear interpolation between Δ_LH^θ of the adjacent NdIG and SmIG. It has been found that the partial derivative (∂Δ_LH^θ/∂V_m) for the series of LnIGs corresponds by magnitude and dimension to an upper limit of their rigidity. New effect of magnetic loops has been noted in the same series in the dependence of the lattice magnetic entropies on the effective magnetic moments (theoretical and experimental values).     

Charge-transfer complexes of 4-nitrocatechol with some amino alcohols

Charge-transfer (CT) complexes formed from the reactions of 4-nitropyrocatechol (4-nCat) as an electron acceptor with four amino alcohols: 2-aminoethanol, 1-amino-2-propanol, 4-aminobutanol and N-(2-hydroxyethyl)-1,3-diaminopropane (NHEDAP) as electron donors, have been studied spectrophotometrically in H₂O and H₂O/EtOH at 20, 25, 30, 35 and 40 °C. The calculated values of the oscillator strength and transition moment confirm the formation of CT-complexes. The thermodynamic and spectroscopic parameters were also evaluated for the formation of CT-complexes. The equilibrium constants ranged from 9.00 to 2.20 l mol^?1 (M^?1). These interactions are exothermic and have relatively large standard enthalpy and entropy changes (ΔH values ranged from ?15.58 to ?3.10 kJ mol^?1; ΔS ranged from 26.81 to ?3.25 J K^?1 mol^?1). The solid CT-complexes have been synthesized and characterized by IR, NMR, mass spectrometry and thermal analysis. The photometric titration curves and other spectrometric data for the reactions indicated that the data obtained refer to the formation of 1:1 charge-transfer complex of [(4-nCat) (NHEDAP)] and 1:2 charge-transfer complexes of other amino alcohols [(4-nCat) (amino alcohol)₂]. The effect of alkali and alkaline earth metals on increasing the equilibrium constant of the CT-complexation was also investigated.     

Excess molar enthalpies and excess molar volumes of (1,3-dimethyl-2-imidazolidinone + an aromatic hydrocarbon) atT = 298.15 K

Excess molar enthalpies H_m^Eand excess molar volumesV_m^E of (1,3-dimethyl-2-imidazolidinone  +  benzene, or methylbenzene, or 1,2-dimethylbenzene, or 1,3-dimethylbenzene, or 1,4-dimethylbenzene, or 1,3,5-trimethylbenzene, or ethylbenzene) over the whole range of compositions have been measured at T =  298.15 K. The excess molar enthalpy values were positive for five of the seven systems studied and the excess molar volume values were negative for six of the seven systems studied. The excess enthalpy ranged from a maximum of 435 J · mol ^− 1for (1,3-dimethyl-2-imidazoline  +  1,3,5-trimethylbenzene) to a minimum of  − 308 J · mol ^− 1for (1,3-dimethyl-2-imidazoline  +  benzene). The excess molar volume values ranged from a maximum of 0.95cm³mol ^− 1 for (1,3-dimethyl-2-imidazoline  +  ethylbenzene) and a minimum of  − 1.41 cm³mol ^− 1for (1,3-dimethyl-2-imidazoline  +  methylbenzene). The Redlich–Kister polynomial was used to correlate both the excess molar enthalpy and the excess molar volume data and the NRTL and UNIQUAC models were used to correlate the enthalpy of mixing data. The NRTL equation was found to be more suitable than the UNIQUAC equation for these systems. The results are discussed in terms of the polarizability of the aromatic compound and the effect of methyl substituents on the benzene ring.     

Thermodynamics of protonation of amines in aqueous solutions at elevated temperatures

The dissociation constants, pK_a, of monoethanolamine (MEA), N-methyldiethanolamine (MDEA), 2-amino-2-methyl-1-propanol (AMP), 2(2-aminoethyl)etanolamine (AEEA), and piperazine (Pz) were measured by potentiometric titration over the temperature range (298.15 to 363.15) K. Enthalpies of protonation, ΔH_p, were measured calorimetrically at temperatures from (298.15 to 393.15) K for MEA, MDEA, and AMP, and from (298.15 to 353.15) K for AEEA and Pz. In addition, the effect of the ionic strength of the solutions on the protonation of MDEA was studied using NaCl as background salt {(0 to 5.5) mol/kg-H₂O)}. Correlations for the reaction equilibrium constants for proton dissociation are proposed for the studied amines based on the experimental data from literature and from this work. Both experimental enthalpy data and dissociation constants were used for fitting. The results from this work may be used for thermodynamic modeling of CO₂ capture processes using amines.     

Vibrational spectra,conformational equilibria,ab initio calculations and vibrational assignments of ethylmethylfluorosilane

The infrared spectra of ethylmethylfluorosilane (CH₃SiHFCH₂CH₃) have been recorded as a vapour, liquid and solid at 78 K in the 4000–50 cm⁻¹ range and isolated in an argon matrix at ca. 5 K. Infrared spectra of two different solid phases were obtained after annealing to temperatures of 120 and 130 K, and recooling to 78 K. Although the IR spectra were quite similar in the MIR region, certain differences were noted in the FIR region below 400 cm⁻¹. The most stable conformer MeMe was present after annealing to 130 K, but three bands belonging to MeH were detected after annealing to 120 K. Various infrared bands changed intensity when the argon matrix was annealed to temperatures between 20 and 35 K, and some of these were related to changes in the conformational abundance.Raman spectra of the liquid were recorded at room temperature and at various temperatures between 295 and 153 K. Spectra of an amorphous and annealed solid were recorded at 78 K. In the variable temperature Raman spectra, various bands changed in intensity and were interpreted in terms of conformational equilibria between the three possible conformers. Complete assignments were made for all the bands of the most stable conformer MeMe. From various bands assigned to the three conformers, the conformational enthalpy difference ΔH from MeMe to the intermediate energy conformer MeH was found to be 0.5 kJ mol⁻¹ and to the highest conformer MeF was 0.7 kJ mol⁻¹. At ambient temperature this leads to 39% MeMe, 32% MeH and 29% of the MeF conformer in the liquid.Ab initio calculations in the RHF, MP2, DFT approximations and very accurate G2 calculations were carried out. With one exception, the MeMe conformer had the lowest enthalpy in all these calculations, the MeH had the intermediate and the MeF the highest enthalpy, and the calculations were in good agreement with the measurements.     

Thermodynamic properties of metal amides determined by ammonia pressure-composition isotherms

Thermodynamic properties of Mg(NH₂)₂ and LiNH₂ were investigated by measurements of NH₃ pressure-composition isotherms (PCI). Van’t Hoff plot of plateau pressures of PCI for decomposition of Mg(NH₂)₂ indicated the standard enthalpy and entropy change of the reactions were ΔH° = (120 ± 11) kJ · mol^?1 (per unit amount of NH₃) and ΔS° = (182 ± 19) J · mol^?1 · K^?1 for the reaction: Mg(NH₂)₂ → MgNH + NH₃, and ΔH° = 112 kJ · mol^?1 and ΔS^o = 157 J · mol^?1 · K^?1 for the reaction: MgNH → (1/3)Mg₃N₂ + (1/3)NH₃. PCI measurements for formation of LiNH₂ were carried out, and temperature dependence of plateau pressures indicated ΔH° = (?108 ± 15) kJ · mol^?1 and ΔS° = (?143 ± 25) J · mol^?1 · K^?1 for the reaction: Li₂NH + NH₃ → 2LiNH₂.     

Standard enthalpies of formation of Ce–Au congruent compounds (CeAu,CeAu2, and Ce14Au51)

The enthalpies of formation of Ce–Au congruent compounds (CeAu, CeAu₂, and Ce₁₄Au₅₁) have been determined at 1123 K and the standard enthalpies of formation at 298 K have been deduced from the measurements of enthalpy increments of single-phase samples. The following values (kJ/mole of atoms) are reported: Δ_fH°_1123 K (CeAu) = −75.2 ± 1.4, Δ_fH°_298 K (CeAu) = −76.2 ± 1.9, Δ_fH°_1123 K (CeAu₂) = −71.3 ± 2.0, Δ_fH°_298 K (CeAu₂) = −70.3 ± 2.2, Δ_fH°_1123 K (Ce₁₄Au₅₁) = −55.0 ± 1.7, and Δ_fH°_298 K (Ce₁₄Au₅₁) = −53.2 ± 1.9.     

Molar heat capacity and thermodynamic properties of 1-cyclohexene-1,2-dicarboxylic anhydride [C8H8O3]

The molar heat capacity C_p,m of 1-cyclohexene-1,2-dicarboxylic anhydride was measured in the temperature range from T=(80 to 360) K with a small sample automated adiabatic calorimeter. The melting point T_m, the molar enthalpy Δ_fusH_m and the entropy Δ_fusS_m of fusion for the compound were determined to be (343.46 ± 0.24) K, (11.88 ± 0.02) kJ · mol⁻¹ and (34.60 ± 0.06) J · K⁻¹ · mol⁻¹, respectively. The thermodynamic functions [H_(T)−H_(298.15)] and [S_(T)−S_(298.15)] were derived in the temperature range from T=(80 to 360) K with temperature interval of 5 K. The mass fraction purity of the sample used in the adiabatic calorimetric study was determined to be 0.9928 by using the fractional melting technique. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the process of the mass-loss of the sample was due to the evaporation, instead of its thermal decomposition.     

Thermodynamics of proton dissociations from aqueous l-methionine at temperatures from (278.15 to 393.15) K,molalities from (0.0125 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of l-methionine,methioninium chloride,and sodium methioninate

We have measured the densities of aqueous solutions of l-methionine, l-methionine plus equimolal HCl, and l-methionine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0125 ⩽ m/mol · kg⁻¹ ⩽ 1.0 as solubilities allowed, and at p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic l-methionine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for methioninium chloride {H₂Met⁺Cl⁻(aq)} and for sodium methioninate {Na⁺Met⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous l-methionine as functions of T and m.     

Thermodynamic properties of Na2Ti6O13 and Na2Ti3O7: electrochemical and calorimetric determination

Standard values of Gibbs free energy, entropy, and enthalpy of Na₂Ti₆O₁₃ and Na₂Ti₃O₇ were determined by evaluating emf-measurements of thermodynamically defined solid state electrochemical cells based on a Na–β″-alumina electrolyte. The central part of the anodic half cell consisted of Na₂CO₃, while two appropriate coexisting phases of the ternary system Na–Ti–O are used as cathodic materials. The cell was placed in an atmosphere containing CO₂ and O₂. By combining the results of emf-measurements in the temperature range of 573⩽T/K⩽1023 and of adiabatic calorimetric measurements of the heat capacities in the low-temperature region 15⩽T/K⩽300, the thermodynamic data were determined for a wide temperature range of 15⩽T/K⩽1100. The standard molar enthalpy of formation and standard molar entropy at T=298.15 K as determined by emf-measurements are Δ_fH_m⁰=(−6277.9±6.5) kJ · mol⁻¹ and S_m⁰=(404.6±5.3) J · mol⁻¹ · K⁻¹ for Na₂Ti₆O₁₃ and Δ_fH_m⁰=(−3459.2±3.8) kJ · mol⁻¹ and S_m⁰=(227.8±3.7) J · mol⁻¹ · K⁻¹ for Na₂Ti₃O₇. The standard molar entropy at T=298.15 K obtained from low-temperature calorimetry is S_m⁰=399.7 J · mol⁻¹ · K⁻¹ and S_m⁰=229.4 J · mol⁻¹ · K⁻¹ for Na₂Ti₆O₁₃ and Na₂Ti₃O₇, respectively. The phase widths with respect to Na₂O content were studied by using a Na₂O-titration technique.     

The molar enthalpies of solution and vapour pressures of saturated aqueous solutions of some cesium salts

Vapour pressures of water over saturated solutions of cesium chloride, cesium bromide, cesium nitrate, cesium sulfate, cesium formate, and cesium oxalate were determined as a function of temperature. These vapour pressures were used to evaluate the water activities, osmotic coefficients and molar enthalpies of vapourization. Molar enthalpies of solution of cesium chloride, Δ_solH_m(T = 295.73 K; m = 0.0622 mol · kg⁻¹) = (17.83 ± 0.50) kJ · mol⁻¹; cesium bromide, Δ_solH_m(T = 293.99 K; m = 0.0238 mol · kg⁻¹) = (26.91 ± 0.59) kJ · mol⁻¹; cesium nitrate, Δ_solH_m(T = 294.68 K; m = 0.0258 mol · kg⁻¹) = (37.1 ± 2.3) kJ · mol⁻¹; cesium sulfate, Δ_solH_m(T = 296.43 K; m = 0.0284 mol · kg⁻¹) = (16.94 ± 0.43) kJ · mol⁻¹; cesium formate, Δ_solH_m(T = 295.64 K; m = 0.0283 mol · kg⁻¹) = (11.10 ± 0.26) kJ · mol⁻¹ and Δ_solH_m(T = 292.64 K; m = 0.0577 mol · kg⁻¹) = (11.56 ± 0.56) kJ · mol⁻¹; and cesium oxalate, Δ_solH_m(T = 291.34 K; m = 0.0143 mol · kg⁻¹) = (22.07 ± 0.16) kJ · mol⁻¹ were determined calorimetrically. The purity of the chemicals was generally greater than 0.99 mass fraction, except for HCOOCs and (COOCs)₂ where purities were approximately 0.95 and 0.97 mass fraction, respectively. The uncertainties are one standard deviations.     

Strain energy of phenanthrene

The strain energy of phenanthrene was derived to be (4.9 ± 2.8) kJ · mol⁻¹, on the basis of the latest standard enthalpies of formation of polycyclic aromatic hydrocarbons. This strain energy agrees well with those estimated from a semi-empirical calculation and from the basicity in hydrogen fluoride solution. The calculation again confirmed the standard enthalpy of formation of phenanthrene, Δ_fH⁰(g)=(201.7±2.9) kJ · mol⁻¹ at T=298.15 K, which was determined by Nagano (J. Chem. Thermodyn. 34 (2002) 377–383). The coupling constant J_4,5 in ¹H-n.m.r. spectrum of phenanthrene in CDCl₃ solution was determined to be 0.55 Hz, which indicates no significant through-space coupling between the 4- and 5-hydrogens.