Co-crystal of (R,R)-1,2-cyclohexanediol with (R,R)-tartaric acid,a key structure in resolution of the (±)-trans-diol by supercritical extraction,and the related ternary phase system

A novel co-crystal of trans-(R,R)-1,2-cyclohexanediol and (R,R)-tartaric acid (with 1:1 molar ratio, 1) has been found to be a key crystalline compound in the improved resolution of (±)-trans-1,2-cyclohexanediol by supercritical fluid extraction. The molecular and crystal structure of this co-crystal, which crystallizes in orthorhombic crystal system (space group P2₁2₁2₁, a = 6.7033(13) Å, b = 7.2643(16), c = 24.863(5), Z = 4), has been solved by single crystal X-ray diffraction (R = 0.064). The packing arrangement consists of two dimensional layers of sandwich-like sheets, where the inner part is constructed by double layers of tartaric acids which hydrophilicity is “covered” on both upper and bottom side by cyclohexanediols with the hydrophobic cyclohexane rings pointing outward. Thus, a rather complex hydrogen bonding pattern is constructed. The relatively high melting point (133 °C) observed by both simultaneous TG/DTA and DSC, and the main features of FTIR-spectrum of 1 are explained by the increased stability of this crystal structure. DSC studies on binary mixtures of co-crystal 1 with (R,R)-1,2-cyclohexanediol or (R,R)-tartaric acid, revealed eutectic temperatures of T_eu = 100 or 131 °C, respectively. Between (S,S)-1,2-cyclohexanediol and (R,R)-tartaric acid a eutectic temperature of T_eu = 85 °C have also been observed. The phase relations have been confirmed by powder X-ray diffraction, as well.     

Synthesis and asymmetric catalytic application of chiral imidazolium–phosphines derived from (1R,2R)-trans-diaminocyclohexane

Reaction between a chiral imidazole–amine precursor derived from (1R,2R)-trans-diaminocyclohexane and P¹Cl (where P¹ = PPh₂, P(1,3,5-Me₃C₆H₃)₂, P(2,2′-O,O′-(1,1′-biphenyl), P((R)-(2,2′-O,O′-(1,1′-binaphthyl))) and P((S)-(2,2′-O,O′-(1,1′-binaphthyl)))) followed by RX (where R = ⁿPr, ⁱPr, CHPh₂, X = Br; R = ⁱPr, X = I), respectively, gives a selection of chiral imidazolium–phosphine compounds. Deprotonation of the imidazolium salt gives the corresponding NHC–P ligands that can be used in metal-mediated asymmetric catalytic applications. Catalytic reactions show that NHC–P ligands give a significantly greater rate of reaction for a palladium catalysed allylic substitution reaction in comparison to analogous di-NHC or NHC–imine ligands and that NHC–P hybrids are also effective for iridium catalysed transfer hydrogenation.     

A green resolution–separation process for aliphatic secondary alcohols

In order to obtain both enantiomers of aliphatic secondary alcohols via a greener method, the four-step resolution–separation process involving lipase-catalyzed enantioselective esterification and hydrolysis as well as two separation procedures both via heterogeneous azeotropic distillation was developed. (S)-2-Pentanol (ee = 98.6%), (R)-2-pentanol (ee >99%), (S)-2-octanol (ee = 98.2%), and (R)-2-octanol (ee = 98.5%) were all produced in high purity (>98%) and high yield (>90%). In addition to the two model substrates, this method could also be applied to the resolution of other aliphatic secondary alcohols.     

Continuous-flow enzymatic resolution strategy for the acylation of amino alcohols with a remote stereogenic centre: synthesis of calycotomine enantiomers

Both enantiomers of calycotomine (R)-5 and (S)-5 were prepared through the CAL-B-catalysed asymmetric O-acylation of N-Boc-protected (6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolin-1-yl)methanol [(±)-3)]. The optimum conditions for the enzymatic resolution were determined under continuous-flow conditions, while the preparative-scale resolution of (±)-3 was performed as a batch reaction with high enantioselectivity (E >200). The resulting amino alcohol (S)-3 and amino ester (R)-4, obtained with high enantiomeric excess (ee = 99%), were transformed into the desired calycotomine (S)-5 and (R)-5 (ee = 99%). A systematic study was carried out in a continuous-flow system on the O-acylation of tetrahydroisoquinoline amino alcohol homologues (±)-1 to (±)-3 containing a remote stereogenic centre.     

Synthesis of the (1S,2S)- and (1R,2S)-stereoisomers of the respective E- and Z-isomers of ethyl 4-[(2-hydroxycyclohexyl)methyl]phenoxy-3-methyl-2-butenoate using yeast whole cell bioreduction of the parent ketones

Saccharomyces cerevisiae, strain DBM 2115, was successfully employed in the reduction of the separated Z- and E-isomers of ethyl 4-[(2-oxocyclohexyl)methyl]phenoxy-3-methyl-2-butenoates 1 and 2, in order to prepare the (1S,2S)- and (1R,2S)-enantiomers of the corresponding ethyl 4-[(2-hydroxycyclohexyl)methyl]phenoxy-3-methyl-2-butenoates 3–6. The products were obtained with the required absolute configuration: (1S,2S)-3 (ee = 98%; yield 48%), (1R,2S)-4 (ee = >99%; yield 45%), (1S,2S)-5 (ee = 98.5%; yield 47%), and (1R,2S)-6 (ee = >99%; chemical yield 44%).     

Approaches to (R)- and (S)-1′-(1-aminoethyl)ferrocene-1-carboxylic acid derivatives

Lipase-catalyzed esterification of (±)-methyl 1′-(1-hydroxyethyl)ferrocene-1-carboxylate 4 afforded its (R)-acetate (−)-5 (ee = 99%) and (S)-(+)-4 (ee = 90%). Stereoretentive azidation/amination/acetylation of (R)-(−)-5 gave (R)-(+)-methyl 1′-(1-acetamidoethyl)ferrocene-1-carboxylate (R)-3 (ee = 98%). In a similar manner (S)-(+)-4 was converted into (S)-(−)-3 (ee = 84%). Both enantiomers of 3 were obtained in high chemical yields without a loss of enantiomeric purity. The title compounds can be coupled with natural amino acids and peptides on both C- and N-termini.     

Convenient double-enzymatic synthesis of both enantiomers of 6-methyl-ε-caprolactone

Both enantiomers of 6-methyl-ε-caprolactone (6-MeCL) are obtained in high enantiomeric excess by the combination of an enzymatic ring opening of racemic 6-methyl-ε-caprolactone and subsequent enzymatic ring closure. Immobilized Candida antarctica lipase B (Novozym 435) was selected as the biocatalyst for both the ring-opening and the ring-closing reaction. This route provides ready access to enantiopure (S)-6-MeCL (ee = 99.6%) and (R)-6-MeCL (ee = 98.8%).     

Lipase-catalyzed kinetic and dynamic kinetic resolution of 1,2,3,4-tetrahydroisoquinoline-1-carboxylic acid

A dynamic kinetic resolution method for the preparation of enantiopure 1,2,3,4-tetrahydroisoquinoline-1-carboxylic acid (R)-2 was developed involving the CAL-B-catalyzed enantioselective hydrolysis of the corresponding ethyl ester (±)-1 in toluene/acetonitrile (4:1) containing 1 equiv of added water and 0.25 equiv of dipropylamine. This method allowed the preparation of (R)-2 (ee = 96%) with 80% isolated yield. The kinetic resolution of (±)-1 in diisopropyl ether at 3 °C afforded both enantiomers with ee ⩾92%.     

Reactivity of intramolecularly coordinated aluminum compounds to R3EOH (E = Sn,Si). Remarkable migration of N,C,N and O,C,O pincer ligands

The reaction of organoaluminum compounds containing O,C,O or N,C,N chelating (so called pincer) ligands [2,6-(YCH₂)₂C₆H₃]AlⁱBu₂ (Y = MeO 1, ^tBuO 2, Me₂N 3) with R₃SnOH (R = Ph or Me) gives tetraorganotin complexes [2,6-(YCH₂)₂C₆H₃]SnR₃ (Y = MeO, R = Ph 4, Y = MeO, R = Me 5; Y = ^tBuO, R = Ph 6, Y = ^tBuO, R = Me 7; Y = Me₂N, R = Ph 8, Y = Me₂N, R = Me 9) as the result of migration of O,C,O or N,C,N pincer ligands from aluminum to tin atom. Reaction of 1 and 2 with (ⁿBu₃Sn)₂O proceeded in similar fashion resulting in 10 and 11 ([2,6-(YCH₂)₂C₆H₃]SnⁿBu₃, Y = MeO 10; Y = ^tBuO 11) in mixture with ⁿBu₃SnⁱBu. The reaction 1 and 3 with 2 equiv. of Ph₃SiOH followed another reaction path and ([2,6-(YCH₂)₂C₆H₃]Al(OSiPh₃)₂, Y = MeO 12, Me₂N 13) were observed as the products of alkane elimination. The organotin derivatives 4–11 were characterized by the help of elemental analysis, ESI-MS technique, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and in the case 6 and 8 by single crystal X-ray diffraction (XRD). Compounds 12 and 13 were identified using elemental analysis,¹H, ¹³C, ²⁹Si NMR and IR spectroscopy.     

Thermochemistry of Cu(II) and Ni(II) complexes with N,N-di-n-butyl-N′-thenoylthiourea and N,N-di-iso-butyl-N′-thenoylthiourea

Two substituted N-acylthioureas and the respective Ni(II) and Cu(II) complexes were synthesized, namely: N,N-di-n-butyl-N′-thenoylthiourea (Hnbtu); N,N-di-iso-butyl-N′-thenoylthiourea (Hibtu); bis[N,N-di-n-butyl-N′-thenoylthioureato]nickel(II), [Ni(nbtu)₂]; bis[N,N-di-n-butyl-N′-thenoylthioureato]copper(II), [Cu(nbtu)₂]; bis[N,N-di-iso-butyl-N′-thenoylthioureato]nickel(II), [Ni(ibtu)₂]; bis[N,N-di-iso-butyl-N′-thenoylthioureato]copper(II), [Cu(ibtu)₂]. The standard (p^° = 0.1 MPa) molar enthalpies of formation and sublimation of the two N-acylthioureas were measured, at T = 298.15 K, by rotating-bomb combustion calorimetry and Calvet microcalorimetry, respectively. The standard (p^° = 0.1 MPa) molar enthalpies of formation of the Ni(II) and Cu(II) complexes were determined, at T = 298.15 K, by high precision solution–reaction calorimetry. From the results obtained, the enthalpies of hypothetical metal–ligand and metal–metal exchange reactions, in the gaseous phase, were derived, thus allowing a discussion of the gaseous phase energetic difference between the complexation of Ni(II) and Cu(II) to 1,3-ligand systems with (S,O) ligator atoms.     

Stereocontrolled self-assembly of luminescent lanthanide helicates and their enantiodifferentiation using Δ-TRISPHAT as the NMR resolving agent

Self-assembled supramolecular lanthanide constructs have great potential in luminescent bioprobes/sensors. Stereoselectivity on the lanthanide assemblies is needed to facilitate chiroptical probes and sensors. Herein we report the stereocontrolled synthesis of M₂L₃-type (M = metal ion, L = organic ligand) lanthanide triple-helicates using a chiral-induction strategy, where the periphery point-chirality [(R,R) or (S,S)] of the organic ligands was transferred into the metal centered chirality (ΔΔ or ΛΛ), thus leading to the formation of topological chiral (P or M) helicates. Moreover, commercially available Δ-TRISPHAT proved to be an effective NMR chiral resolving agent to differentiate between the two enantiomers of the helicate.     

Advanced procedure for the enzymatic ring opening of unsaturated alicyclic β-lactams

Enantiopure β-amino acids 1a–4a and β-lactams 1b–4b were prepared simultaneously through the lipolase-catalysed enantioselective ring opening of unsaturated racemic β-lactams (±)-1-(±)-4. High enantioselectivities (E>200) were observed when the reactions were performed with 1 equiv of water in iPr₂O at 70 °C. The resolved (1R,2S)-amino acids (yield⩾45%) and (1S,5R)-, (1S,6R)- and (1S,8R)-lactams (yield⩾47%) could be easily separated. The ring opening of lactam enantiomers 1b–4b with 18% HCl afforded the corresponding β-amino acid hydrochlorides 1c·HCl–4c·HCl (ee >95%).     

Inhomogeneous 2D linear intergrowth structures among novel Y–Cu–Mg ternary compounds with yttrium/copper equiatomic ratio

Single crystals of the Y₅Cu₅Mg₈, Y₅Cu₅Mg₁₃, Y₅Cu₅Mg₁₆ and YCuMg₄ compounds were synthesized by heating in a resistance furnace evacuated quartz vials containing Ta-crucibles with element pieces. SEM-EDXS analyses were performed to check phases composition. The structures were refined from X-ray single crystal diffraction data. Y₅Cu₅Mg₈, Y₅Cu₅Mg₁₃ and Y₅Cu₅Mg₁₆ represent new structure types: Y₅Cu₅Mg₈ – orthorhombic, Pmma, oP36, a = 2.63723(15), b = 0.40066(2), c = 0.74115(6) nm, Z = 2, wR₂ = 0.0597, 939 F² values, 60 variables; Y₅Cu₅Mg₁₃ – orthorhombic, Cmcm, oS92, a = 0.40973(2), b = 1.92794(8), c = 2.57907(11) nm, Z = 4, wR₂ = 0.1134, 1208 F² values, 75 variables; Y₅Cu₅Mg₁₆ – orthorhombic, Cmcm, oS104, a = 0.41360(8), b = 1.9239(4), c = 2.9086(6) nm, Z = 4, wR₂ = 0.0760, 1383 F² values, 84 variables. YCuMg₄ crystallizes in the TbCuMg₄ structure type (Cmmm, oS48, a = 1.35754(4), b = 2.03153(6), c = 0.39060(1) nm, Z = 8, wR₂ = 0.0401, 661 F² values, 45 variables). The crystal chemistry of these two-layer structures is comparatively discussed. Majority of novel compounds were characterized as members of inhomogeneous 2D intergrowth structure series of R₅M₅X₅, X₄ (Mg₄) and empty Mg octahedra building blocks of general formula R_5kM_5kX_{5k + 4l + m}. The common pentagonal prism derivative structural fragments around the most electropositive yttrium atoms were outlined in all these intermetallics.     

Apparent molar heat capacities and apparent molar volumes ofY2(SO4)3(aq),La2(SO4)3(aq),Pr2(SO4)3(aq),Nd2(SO4)3(aq),Eu2(SO4)3(aq),Dy2(SO4)3(aq),Ho2(SO4)3(aq), andLu2(SO4)3(aq)atT = 298.15 K andp = 0.1 MPa

The apparent molar heat capacities C_{p, φ} ^∘ and apparent molar volumes V_φ ^∘ of Y₂(SO₄)₃(aq), La₂(SO₄)₃(aq), Pr₂(SO₄)₃(aq), Nd₂(SO₄)₃(aq), Eu₂(SO₄)₃(aq), Dy₂(SO₄)₃(aq), Ho₂(SO₄)₃(aq), and Lu₂(SO₄)₃(aq) were measured at T =  298.15 K and p =  0.1 MPa with a Sodev (Picker) flow microcalorimeter and a Sodev vibrating-tube densimeter, respectively. These measurements extend from lower molalities of m =  (0.005 to 0.018) mol ·kg ^− 1to m =  (0.025 to 0.434) mol ·kg ^− 1, where the upper molality limits are slightly below those of the saturated solutions. There are no previously published apparent molar heat capacities for these systems, and only limited apparent molar volume information. Considerable amounts of the R SO₄ ⁺ (aq) and R(SO₄)₂ ⁻ (aq) complexes are present, where R denotes a rare-earth, which complicates the interpretation of these thermodynamic quantities. Values of the ionic molar heat capacities and ionic molar volumes of these complexes at infinite dilution are derived from the experimental information, but the calculations are necessarily quite approximate because of the need to estimate ionic activity coefficients and other thermodynamic quantities. Nevertheless, the derived standard ionic molar properties for the various R SO₄ ⁺ (aq) and R(SO₄)₂ ⁻ (aq) complexes are probably realistic approximations to the actual values. Comparisons indicate that V_φ ^∘ {RSO₄ ⁺ , aq, 298.15K}  =  − (6  ±  4)cm³· mol ^− 1and V_φ ^∘ {R(SO₄)₂ ⁻ , aq, 298.15K}  =  (35  ±  3)cm³· mol ^− 1, with no significant variation with rare-earth. In contrast, values of C_{p, φ} ^∘ { RSO₄ ⁺ , aq, 298.15K } generally increase with the atomic number of the rare-earth, whereas C_{p, φ} ^∘ { R(SO₄)₂ ⁻ , aq, 298.15K } shows a less regular trend, although its values are always positive and tend to be larger for the heavier than for the light rare earths.     

Synthesis of rigid and C2-symmetric 18-crown-6 type macrocycles bearing diamide–diester groups: enantiomeric recognition for α-(1-naphthyl)ethylammonium perchlorate salts

A series of rigid and chiral C₂-symmetric 18-crown-6 type macrocycles (S,S)-4, (S,S)-5, (S,S)-6 and (R,R)-2 bearing diamide–ester groups were synthesized. The binding properties of these macrocycles were examined for α-(1-naphthyl)ethylammonium perchlorates salts by an ¹H NMR titration method. Taking into account the host employed, important differences were observed in the K_a values of (R)- and (S)-enantiomers of guests for macrocycles (S,S)-4 and (S,S)-6, K_S/K_R = 3.6, and K_S/K_R = 0.1 (K_R/K_S = 10.3) ΔΔG = 3.19 and ΔΔG = ?5.77 kJ mol^?1, respectively. The results indicated excellent enantioselectivity of macrocyclic (S,S)-6 towards the enantiomers of α-(1-naphthyl)ethylammonium perchlorate salts.     

Thiazolo[5,4-d]thiazole-2,5-dicarboxylic acid,C6H2N2O4S2, and its coordination polymers

Thiazolo[5,4-d]thiazole-2,5-dicarboxylic acid, C₆H₂N₂O₄S₂, was isolated as a polycrystalline material, and its crystal structure was determined by ab-initio X-ray powder diffraction (XRPD) methods. This species, upon deprotonation, was subsequently used in preparing the new coordination polymers Ag₂(C₆N₂O₄S₂), Mn(C₆N₂O₄S₂)(H₂O)₂, Co(C₆N₂O₄S₂)(H₂O)₂, Cu(C₆N₂O₄S₂)(H₂O) and Zn(C₆N₂O₄S₂)(H₂O)₂, fully characterized by analytical, thermal and XRPD structural methods – including in situ thermodiffractometry and simultaneous TGA and DSC. In the first-row transition metal derivatives, the [C₆N₂O₄S₂]^2? anion systematically prefers the N,O-chelating, vs. the expected O,O′-bridging, coordination mode, not allowing the formation of porous 3D frameworks. Indeed, these species are dense 1D coordination polymers. At variance, the silver derivative possesses a complex, dense 3D framework, due to the presence of μ₆-[C₆N₂O₄S₂]^2? ligands showing two μ₂-bridging carboxylates and two monohapto N-donor sites. When dehydration is viable, materials of E_n(C₆N₂O₄S₂) formulation are irreversibly recovered (n = 1 for E = Mn, Co, Zn, Cu; n = 2, for E = H).     

Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

Resolution of 1-n-propoxy-3-methyl-3-phospholene 1-oxide by diastereomeric complex formation using TADDOL derivatives and calcium salts of O,O′-dibenzoyl-(2R,3R)- or O,O′-di-p-toluoyl-(2R,3R)-tartaric acid

1-n-Propoxy-3-methyl-3-phospholene 1-oxide was prepared in optically active form by extending resolution methods applying (−)-(4R,5R)-4,5-bis(diphenylhydroxymethyl)-2,2-dimethyldioxolane (‘TADDOL’) and (−)-(2R,3R)-α,α,α′,α′-tetraphenyl-1,4-dioxaspiro[4.5]decan-2,3-dimethanol (‘spiro-TADDOL’), as well as the acidic and neutral Ca²⁺ salts of (−)-O,O′-dibenzoyl- and (−)-O,O′-di-p-toluoyl-(2R,3R)-tartaric acid. In one case, the diastereomeric complex could be identified by single crystal X-ray analysis. The absolute P-configuration of the enantiomers of the phospholene oxide was also determined by CD spectroscopy.     

A calorimetric study of N,N-diethyl-N′-furoylthiourea and N,N-diisobutyl-N′-furoylthiourea

The standard ( p^o =  0.1 MPa) molar enthalpies of combustion in oxygen, at T =  298.15 K, were measured by rotative bomb calorimetry for crystalline N, N -diethyl- N^′-furoylthiourea, (2-C₄H₃O)CONHCSN(C₂H₅)₂, HFET, and N, N -diisobutyl- N^′-furoylthiourea, (2-C₄H₃O)CONHCSN(iso-C₄H₉)₂, HFIB. The standard molar enthalpies of sublimation of both HFET and HFIB were measured by high-temperature Calvet microcalorimetry. These values were used to derive the standard molar enthalpies of formation of the compounds, in their crystalline and gaseous phases.     

Preparation of isoxazolidinyl nucleoside enantiomers by lipase-catalysed kinetic resolution

An efficient biocatalytic procedure to obtain chiral N,O-nucleoside derivatives consisting of a lipase-catalysed resolution of the corresponding racemates in organic solvent has been developed. Enantioselective esterification of thymine and cytosine derivatives, (±)-9a and (±)-9b, has been investigated by comparing the efficiency of different lipases and acyl donors. Since esterification of (±)-9a and (±)-9b, occurred with low enantioselectivity (E ? 14) in the presence of the lipases considered, for preparative purposes we resorted, with success, to a double sequential kinetic resolution, using Lipozyme IM as the best catalyst. This approach enables us to obtain all the enantiomers with ee ? 95%. The absolute configuration of the new chiral N-acetyl cytosine derivative 9b was established by circular dichroism spectroscopy.