Raman microscopy of synthetic goudeyite (YCu6(AsO4)2(OH)6 x 3H2O)

Raman microscopy has been used to study the molecular structure of a synthetic goudeyite (YCu(6)(AsO(4))(3)(OH)(6) x 3H(2)O). These types of minerals have a porous framework similar to that of zeolites with a structure based upon (A(3+))(1-x)(A(2+))(x)Cu(6)(OH)(6)(AsO(4))(3-x)(AsO(3)OH)(x). Two sets of AsO stretching vibrations were found and assigned to the vibrational modes of AsO(4) and HAsO(4) units. Two Raman bands are observed in the region 885-915 and 867-870 cm(-1) region and are assigned to the AsO stretching vibrations of (HAsO(4))(2-) and (H(2)AsO(4))(-) units. The position of the bands indicates a C(2v) symmetry of the (H(2)AsO(4))(-) anion. Two bands are found at around 800 and 835 cm(-1) and are assigned to the stretching vibrations of uncomplexed (AsO(4))(3-) units. Bands are observed at around 435, 403 and 395 cm(-1) and are assigned to the nu(2) bending modes of the HAsO(4) (434 and 400 cm(-1)) and the AsO(4) groups (324 cm(-1)).     

Unexpected fullerene dimerization via [5,6]-bond upon functionalization of C(s)-C70(CF3)8 by the Bingel reaction

The Bingel reaction of the C(s) isomer of C(70)(CF(3))(8) has been found to yield two C(70)(CF(3))(8)[C(CO(2)Et)(2)] monoadducts and one C(70)(CF(3))(8)[C(CO(2)Et)(2)](2) bisadduct as its major products. Malonate addition occurs at those [6,6]-bonds that radiate from the polar pentagons of the C(70)(CF(3))(8) cage. Unexpectedly, X-ray single crystal analysis reveals dimerization of the above substances during crystallization, providing two isomers of {C(70)(CF(3))(8)[C(CO(2)Et)(2)]}(2), one isomer of {C(70)(CF(3))(8)[C(CO(2)Et)(2)](2)}(2) and {C(70)(CF(3))(8)}(2). This dimerization represents [2+2]-cycloaddition via [5,6]-bonds and results in functionalization patterns resembling several known C(70)X(10) derivatives.     

Open-framework cadmium succinates of different dimensionalities

Open-framework cadmium succinates, [CN(3)H(6)](2)[Cd(2)(C(4)H(4)O(4))(Cl)(2)], I; [CN(3)H(6)](2)[Cd(C(4)H(4)O(4))(2)], II; Cd(2)(C(4)H(4)O(4))(2)(C(4)N(2)H(8))(H(2)O)(3), III; [C(4)N(2)H(12)][Cd(2)(C(4)H(4)O(4))(3)].4H(2)O, IV; Cd(C(4)H(4)O(4))(H(2)O)(2), V; and Cd(3)(C(4)H(4)O(4))(2)(OH)(2)], VI, of different dimensionalities have been synthesized by hydrothermal procedure by employing two different strategies, one involving the reaction of Cd salts with organic-amine succinates and the other involving the hydrothermal reaction of Cd salts with a mixture of succinic acid and the organic amine. While the latter procedure yields structures without any amine in them, the former gives rise to amine templated cadmium succinates with open architectures. By employing guanidinium succinate we have obtained I and II, and with piperazinium succinate we obtained III and IV. Of these I has a one-dimensional chain structure, IV has a layered structure, and II and III have three-dimensional architectures. The two cadmium succinates without incorporation of amine, V and VI, possess layered and three-dimensional structures, respectively. The three-dimensional structures II and III exhibit interpenetration similar to that in diamondoid and alpha-polonium type structures, respectively.     

Syntheses, structures, and magnetic properties of mixed-valent diruthenium(II,III) diphosphonates with discrete and one-dimensional structures

Four mixed-valent ruthenium diphosphonates, namely, Na(4)[Ru(2)(hedp)(2)X]x16H(2)O [X = Cl (1), Br (2)], K(3)[Ru(2)(hedp)(2)(H(2)O)(2)]x6H(2)O (3), and Na(7)[Ru(2)(hedp)(2)Fe(CN)(6)]x24H(2)O (4), where hedp represents 1-hydroxyethylidenediphosphonate [CH(3)C(OH)(PO(3))(2)](4-), were synthesized and structurally characterized. Compounds 1, 2, and 4 show linear chain structures in which the mixed-valent [Ru(2)(hedp)(2)](3-) dimers are linked by X(-) or [Fe(CN)(6)](4-) bridges. Compound 3 contains discrete species of [Ru(2)(hedp)(2)(H(2)O)(2)](3-) where the axial positions of [Ru(2)(hedp)(2)](3-) paddlewheel are terminated by water molecules. Magnetic studies show that significant antiferromagnetic exchanges are mediated between the [Ru(2)(hedp)(2)](3-) (S = 3/2) units through halide bridges in compounds 1 and 2.     

The Interaction of C60, C70, and C60(CN)2 radical anions with cobalt(II) tetraphenylporphyrin in solid multicomponent complexes

A method for the synthesis of the multicomponent ionic complexes: [Cr(I)(C(6)H(6))(2) (.+)][Co(II)(tpp)(fullerene)(-)].C(6)H(4)Cl(2), comprising bis(benzene)chromium (Cr(C(6)H(6))(2)), cobalt(II) tetraphenylporphyrin (Co(II)(tpp)), fullerenes (C(60), C(60)(CN)(2), and C(70)), and o-dichlorobenzene (C(6)H(4)Cl(2)) has been developed. The monoanionic state of the fullerenes has been proved by optical absorption spectra in the UV/vis/NIR and IR ranges. The crystal structures of the ionic [[Cr(I)(C(6)H(6))(2)](.+)](1.7)[[Co(II)(tpp)(C(60))](2)](1.7-). 3.3 C(6)H(4)Cl(2) and [[Cr(I)(C(6)H(6))(2)] (.+)](2)[Co(II)(tpp)[C(60)(CN)(2)]](-)[C(60)(CN)(2) (.-)]).3 C(6)H(4)Cl(2) are presented. The essentially shortened Co.C(fullerene) bond lengths of 2.28-2.32 A in these complexes indicate the formation of sigma-bonded [Co(II)(tpp)][fullerene](-) anions, which are diamagnetic. All the ionic complexes are semiconductors with room temperature conductivity of 2 x 10(-3)-4 x 10(-6) S cm(-1), and their magnetic susceptibilities show Curie-Weiss behavior. The neutral complexes of Co(II)(tpp) with C(60), C(60)(CN)(2), C(70), and Cr(0)(C(6)H(6))(2), as well as the crystal structures of [Co(II)(tpp)](C(60)).2.5 C(6)H(4)Cl(2), [Co(II)(tpp)](C(70)). 1.3 CHCl(3).0.2 C(6)H(6), and [Cr(0)(C(6)H(6))(2)][Co(II)(tpp)] are discussed. In contrast to the ionic complexes, the neutral ones have essentially longer Co.C(fullerene) bond lengths of 2.69-2.75 A.     

The crystal chemistry of Ca(10-y)(SiO4)3(SO4)3Cl(2-x-2y)F(x) ellestadite

Fluor-chlorellestadite solid solutions Ca(10)(SiO(4))(3)(SO(4))(3)Cl(2-x)F(x), serving as prototype crystalline matrices for the fixation of hazardous fly ash, were synthesized and characterized by powder X-ray and neutron diffraction (PXRD and PND), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The lattice parameters of the ellestadites vary linearly with composition and show the expected shrinkage of unit cell volume as fluorine (IR = 1.33 ?) displaces chlorine (IR = 1.81 ?). FTIR spectra indicate little or no OH(-) in the solid solutions. All compositions conform to P6(3)/m symmetry where F(-) is located at the 2a (0, 0, (1)/(4)) position, while Cl(-) is displaced out of the 6h Ca(2) triangle plane and occupies 4e (0, 0, z) split positions with z ranging from 0.336(3) to 0.4315(3). Si/S randomly occupy the 6h tetrahedral site. Ellestadites rich in Cl (x ≤ 1.2) show an overall deficiency in halogens (<2 atom per formula unit), particularly Cl as a result of CaCl(2) volatilization, with charge balance achieved by the creation of Ca vacancies (Ca(2+) + 2Cl(-) →□(Ca) + 2□(Cl)) leading to the formula Ca(10-y)(SiO(4))(3)(SO(4))(3)Cl(2-x-2y)F(x). For F-rich compositions the vacancies are found at Ca(2), while for Cl-rich ellestadites, vacancies are at Ca(1). It is likely the loss of CaCl(2) which leads tunnel anion vacancies promotes intertunnel positional disorder, preventing the formation of a P2(1)/b monoclinic dimorph, analogous to that reported for Ca(10)(PO(4))(6)Cl(2). Trends in structure with composition were analyzed using crystal-chemical parameters, whose systematic variations served to validate the quality of the Rietveld refinements.     

Ba2(BO3)(1-x)(CO3)(x)Cl(1+x): a mixed borate and carbonate chloride crystallized from high-temperature solution

A mixed borate and carbonate chloride Ba(2)(BO(3))(1-x)(CO(3))(x)Cl(1+x) was obtained by spontaneous crystallization from a high-temperature melt in open air. It crystallizes in the trigonal crystal system with space group of P3m?1 and lattice constants of a = 5.4708(8) ? and c = 10.640(2) ?. The structure can be viewed as an intergrowth of trigonal Ba(2)Mg(BO(3))(2) (001) slab and (111) slab of the cubic fluorite BaCl(2). During Fourier analysis of the single-crystal X-ray diffraction data, additional electron density was found locating at 1b (0, 0, 1/2) site and attributed to chlorine surplus, which was confirmed by chemical titration. Charge balance of the compound was found, unexpectedly in an acidic borate containing high-temperature melt, by partial CO(3)(2-) group substituting the BO(3)(3-) group. The existence of CO(3)(2-) anion in the crystal was detected by thermogravimetry-mass spectrum analysis and Raman spectrum. The transmittance spectrum shows that the crystal is transparent from ultraviolet to infrared with short-wavelength absorption edge at about 220 nm.     

Chemistry of Thiobenzoates: Syntheses, Structures, and NMR Spectra of Salts of [M(SOCPh)(3)](-) (M = Zn, Cd, Hg)

The salts (Ph(4)E)[M(SOCPh)(3)] (M = Zn, Cd, or Hg; E = P or As) are produced by the reaction of Zn(NO(3))(2).6 H(2)O, Cd(NO(3))(2).4H(2)O or HgCl(2) with Et(3)NH(+)PhCOS(-) and (Ph(4)E)X (E = P, X = Br; E = As, X = Cl) in aqueous MeOH in the ratios M(II):PhCOS(-):Ph(4)E(+) = 1:>/=3:>/=1. The crystal structures of (Ph(4)P)[Zn(SOCPh)(3)] (1), (Ph(4)As)[Cd(SOCPh)(3)] (2) and (Ph(4)P)[Hg(SOCPh)(3)] (3) have been determined by single-crystal X-ray diffraction experiments. Crystal data for 1: triclinic; space group P&onemacr;; Z = 2; a = 10.819(2) ?, b = 13.219(3) ?, c = 15.951(3) ?; alpha = 101.75(2) degrees, beta = 97.92(1) degrees, gamma = 109.18(2) degrees. Crystal data for 2: triclinic; space group P&onemacr;; Z= 2; a = 10.741(2) ?, b = 13.168(2) ?, c = 15.809(2) ?; alpha = 101.00(1) degrees, beta = 97.65(1) degrees, gamma = 109.88(1) degrees. Crystal data for 3: monoclinic; space group P2(1)/n; Z = 4; a = 13.302(2) ?, b = 14.276(2) ?, c = 21.108(2) ?; beta = 90.92(1) degrees. The compounds 1 and 2 are isomorphous and isostructural. In the anions [M(SOCPh)(3)](-) the metal atoms have trigonal planar coordination by three sulfur atoms. The metal atoms are further more weakly coordinated intramolecularly to one (M = Hg) or two (M = Zn, Cd) thiobenzoate oxygen atom(s). Using the Bond Valence approach it is found that the contribution of M.O bonding to the total bonding is in the order Cd > Zn > Hg. The metal ((113)Cd, (199)Hg) NMR signals of [M(SOCPh)(3)](-) (M = Cd, Hg) are more shielded than those found for MS(3) kernels in thiolate complexes, a difference attributed to the M(.)O bonding in the thiobenzoate complexes. The (113)Cd resonance of [Cd(SOCPh)(3)](-) in dilute solution is in the region anticipated from dilution data for [Na(Cd{SOCPh}(3))(2)](-).     

Synthesis, properties and structures of eight-coordinate zirconium(IV) and hafnium(IV) halide complexes with phosphorus and arsenic ligands

Eight-coordinate [MX(4)(L-L)(2)] (M = Zr or Hf; X = Cl or Br; L-L = o-C(6)H(4)(PMe(2))(2) or o-C(6)H(4)(AsMe(2))(2)) were made by displacement of Me(2)S from [MX(4)(Me(2)S)(2)] by three equivalents of L-L in CH(2)Cl(2) solution, or from MX(4) and L-L in anhydrous thf solution. The [MI(4)(L-L)(2)] were made directly from reaction of MI(4) with the ligand in CH(2)Cl(2) solution. The very moisture-sensitive complexes were characterised by IR, UV/Vis, and (1)H and (31)P NMR spectroscopy and microanalysis. Crystal structures of [ZrCl(4)[o-C(6)H(4)(AsMe(2))(2)](2)], [ZrBr(4)[-C(6)H(4)(PMe(2))(2)](2)], [ZrI(4)[o-C(6)H(4)(AsMe(2))(2)](2)] and [HfI(4)[o-C(6)H(4)(AsMe(2))(2)](2)] all show distorted dodecahedral structures. Surprisingly, unlike the corresponding Ti(iv) systems, only the eight-coordinate complex was found in each system. In contrast, the ligand o-C(6)H(4)(PPh(2))(2) forms only six-coordinate complexes [MX(4)[-C(6)H(4)(PPh(2))(2)]] which were fully characterised spectroscopically and analytically. Surprisingly the tripodal triarsine, MeC(CH(2)AsMe(2))(3), also produces eight-coordinate [MX(4)[MeC(CH(2)AsMe(2))(3)](2)] in which the triarsines bind as bidentates in a distorted dodecahedral structure. There is no evidence for seven-coordination as found in some thioether systems.     

New dirhenium(III) compounds bridged by carboxylate ligands: N(C(4)H(9))(4)[Re(2)(OOCCF(3))Cl(6)] and Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2)

The solvothermal reaction of (N(C(4)H(9))(4))(2)[Re(2)Cl(8)] with trifluoroacetic acid and acetic anhydride leads to the new rhenium trifluoroacetate dimer N(C(4)H(9))(4)[Re(2)(OOCCF(3))Cl(6)] (1) and to the rhenium carbonyl dimer Re(2)(mu(2)-Cl)(2)(CO)(8) as the rhenium-reduced byproduct. The reaction of the precursor complex, N(C(4)H(9))(4)[Re(2)(OOCCF(3))Cl(6)] (1), with the organometallic carboxylic acid (CO)(6)Co(2)HCCCOOH leads to the cluster of clusters compound Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2) (2), which has the dimer structure of Re(2)(OOCR)(4)Cl(2). Cyclic voltammetric measurements show that Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2) (2) has one reduction centered on the dirhenium core and a reduction centered on the cobalt atoms. DFT calculations have been used to rationalize the observed displacements of the voltammetric signals in Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2) (2) compared to the parent ligand (CO)(6)Co(2)HCCCOOH and rhenium pivalate.     

Novel concentration-driven structural interconversion in shape-specific solids supported by the octahedral [Re(6)(mu3-Se)8]2+ cluster core

A complex containing the face-capped octahedral [Re(6)(mu(3)-Se)(8)](2+) cluster core, cis-[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](SbF(6))(2) (1), is used as a ditopic ligand with an enforced right angle between the two 4,4'-dipyridyl moieties for the coordination of Cd(2+) ion. Two coordination polymers, [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](2)[Cd(NO(3))(2)]](SbF(6))(4).21C(4)H(10)O.21CH(2)Cl(2) (2) and [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)][Cd(NO(3))(3)]](NO(3)).2C(4)H(10)O.CH(2)Cl(2) (3), are obtained. The relative concentration of Cd(2+) determines which species is isolated, and the conversion of the first structure into the second is demonstrated experimentally.     

Molecular and electronic structures of iron complexes containing N,S-coordinated,open-shell o-iminothionebenzosemiquinonate(1-) pi radicals

The reaction of the dinuclear species (mu-NH,NH)[Fe(III)(L(IP))(L(AP))](2) dissolved in CH(2)Cl(2) with dioxygen affords black microcrystals of diamagnetic (mu-S,S)[Fe(III)(L(IP))(L(ISQ))](2).n-hexane (6) upon the addition of n-hexane, where (L(IP))(2)(-) represents the dianion of 4,6-di-tert-butyl-2-aminothiophenol, (L(AP))(-) is the corresponding monoanion, and (L(ISQ))(-) is the corresponding o-iminothionebenzosemiquinonate(1-) pi radical monoanion; similarly, the dianion ('H(2)N(2)S(2)')(2)(-) is derived from 1,2-ethanediamine-N,N'-bis(2-benzenethiol), and ('N(2)S(2)(*)')(3)(-) is its monoradical trianion. The above reaction in a CH(2)Cl(2)/CH(3)OH (1:1) mixture yields the diamagnetic isomer (mu-NH,NH)[Fe(III)(L(IP))(L(ISQ))](2).5CH(3)OH (7), whereas air oxidation of (mu-S,S)[Fe(II)('H(2)N(2)S(2)')](2) in CH(3)CN yields diamagnetic (mu-S,S)[Fe(III)('N(2)S(2)(*)')](2) (8). Complexes 6 and 8 were shown to undergo addition reactions with phosphines, phosphites, or cyanide affording the following complexes: trans-[Fe(II)(L(ISQ))(2)(P(OPh)(3))] (9; S(t) = 0) and [N(n-Bu)(4)][Fe(II)(L(ISQ))(2)(CN)] (S(t) = 0). Oxidation of 6 in CH(2)Cl(2) with iodine, bromine, and chlorine respectively yields black microcrystals of [Fe(III)(L(ISQ))(2)X] (X = I, Br, or Cl) with S(t) = (1)/(2). The structures of complexes 6-9 have been determined by X-ray crystallography at 100 K. The oxidation level of the ligands and iron ions in all complexes has been unequivocally established, as indicated by crystallography; electron paramagnetic resonance, UV-vis, and M?ssbauer spectroscopies; and magnetic-susceptibility measurements. The N,S-coordinated o-iminothionebenzosemiquinonate(1-) pi radicals have been identified in all new complexes. The electronic structures of the new complexes have been determined, and it is shown that no evidence for iron oxidation states >III is found in this chemistry.     

Alkene metatheses in transition metal coordination spheres: dimacrocyclizations that join trans positions of square-planar platinum complexes to give topologically novel diphosphine ligands

The alkene-containing phosphines PPh((CH2)(n)CH=CH2)2)2 are prepared from PPhH(2), n-BuLi, and the corresponding bromoalkenes (1:2:2), and combined with the platinum tetrahydrothiophene complex [Pt(mu-Cl)(C(6)F(5))(S(CH2CH2(-))2)]2 to give the square-planar adducts trans-(Cl)(C(6)F(5))Pt(PPh((CH2)(n)CH=CH2)2)2 (11, 93-73%; n=a, 2; b, 3; c, 4; d, 5; e, 6; f, 8). Ring-closing metatheses with Grubbs' catalyst (2) are studied. With, two isomers of trans-(Cl)(C6F5)[formula: see text](14)Ph)(15e) are isolated after hydrogenation. Both form via dimacrocyclization between the trans-phosphine ligands, but differ in the dispositions of the PPh rings (syn, 31%; anti, 7%). The alternative intraligand metathesis product trans-(Cl)(C6F5)[formula: see text](14)Ph)2 (16e) is independently prepared by (i) protecting 4e as a borane adduct, H(3)B.PPh((CH(2))(6)CH=CH2)2, (ii) cyclization with 2 and hydrogenation to give H(3)B[formula: see text] (14), (iii) deprotection and reaction with 12. The sample derived from 11e contains < or = 2% 16e; mass spectra suggest that the other products are dimers or oligomers. The structures of syn-15e, anti-15e and 16e are verified crystallographically, and the macrocycle conformations analyzed. As expected from the (CH(2))(n) segment length, 11a undergoes intraligand metathesis to give (Z,Z)-trans-(Cl)(C6F5)Pt[formula: see text]CH2)2)2 (86%), as confirmed by a crystal structure of the hydrogenation product. Although 11b does not yield tractable products, 11c gives syn-(E,E)-trans-(Cl)(C6F5[formula:see text](21%). This structure, and that of the hydrogenation product (syn-15c; 95%), are verified crystallographically. Analogous sequences with 11d,f give syn-15d (5 and 14% overall).     

Synthesis and characterization of iron(III)-substituted, dimeric polyoxotungstates, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV))

Interaction of the lacunary [alpha-XW(9)O(33)](9-) (X = As(III), Sb(III)) with Fe(3+) ions in acidic, aqueous medium leads to the formation of dimeric polyoxoanions, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)) in high yield. X-ray single-crystal analyses were carried out on Na(6)[Fe(4)(H(2)O)(10)(beta-AsW(9)O(33))(2)] x 32H(2)O, which crystallizes in the monoclinic system, space group C2/m, with a = 20.2493(18) A, b = 15.2678(13) A, c = 16.0689(14) A, beta = 95.766(2) degrees, and Z = 2; Na(6)[Fe(4)(H(2)O)(10)(beta-SbW(9)O(33))(2)] x 32H(2)O is isomorphous with a = 20.1542(18) A, b = 15.2204(13) A, c = 16.1469(14) A, and beta = 95.795(2) degrees. The selenium and tellurium analogues are also reported, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](4-) (X = Se(IV), Te(IV)). They are synthesized from sodium tungstate and a source of the heteroatom as precursors. X-ray single-crystal analysis was carried out on Cs(4)[Fe(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)] x 21H(2)O, which crystallizes in the triclinic system, space group P macro 1, with a = 12.6648(10) A, b = 12.8247(10) A, c = 16.1588(13) A, alpha = 75.6540(10) degrees, beta = 87.9550(10) degrees, gamma = 64.3610(10) gamma, and Z = 1. All title polyanions consist of two (beta-XW(9)O(33)) units joined by a central pair and a peripheral pair of Fe(3+) ions leading to a structure with idealized C(2h) symmetry. It was also possible to synthesize the Cr(III) derivatives [Cr(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)), the tungstoselenates(IV) [M(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)]((16)(-)(4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), and Hg(2+)), and the tungstotellurates(IV) [M(4)(H(2)O)(10)(beta-TeW(9)O(33))(2)]((16-4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Hg(2+)), as determined by FTIR. The electrochemical properties of the iron-containing species were also studied. Cyclic voltammetry and controlled potential coulometry aided in distinguishing between Fe(3+) and W(6+) waves. By variation of pH and scan rate, it was possible to observe the stepwise reduction of the Fe(3+) centers.     

High-dimensional assembly depending on polyoxoanion templates, metal ion coordination geometries, and a flexible bis(imidazole) ligand

By introducing the flexible 1,1'-(1,4-butanediyl)bis(imidazole) (bbi) ligand into the polyoxovanadate system, five novel polyoxoanion-templated architectures based on [As(8)V(14)O(42)](4-) and [V(16)O(38)Cl](6-) building blocks were obtained: [M(bbi)(2)](2)[As(8)V(14)O(42)(H(2)O)] [M = Co (1), Ni (2), and Zn (3)], [Cu(bbi)](4)[As(8)V(14)O(42)(H(2)O)] (4), and [Cu(bbi)](6)[V(16)O(38)Cl] (5). Compounds 1-3 are isostructural, and they exhibit a binodal (4,6)-connected 2D structure with Schl?fli symbol (3(4) x 4(2))(3(4) x 4(4) x 5(4) x 6(3))(2), in which the polyoxoanion induces a closed four-membered circuit of M(4)(bbi)(4). Compound 4 exhibits an interesting 3D framework constructed from tetradentate [As(8)V(14)O(42)](4-) cluster anions and cationic ladderlike double chains. There exists a bigger M(8)(bbi)(6)O(2) circuit in 4. The 3D extended structure of 5 is composed of heptadentate [V(16)O(38)Cl](6-) anions and flexural cationic chains; the latter consists of six Cu(bbi) segments arranged alternately. It presents the largest 24-membered circuit of M(24)(bbi)(24) so far observed made of bbi molecules and transition-metal cations. Investigation of their structural relations shows the important template role of the polyoxoanions and the synergetic interactions among the polyoxoanions, transition-metal ions, and flexible ligand in the assembly process. The magnetic properties of compounds 1-3 were also studied.     

Ability of a Au(III)-N unit to bond two aurophilically interacting gold(I) centers

The monohapto neutral 2-(diphenylphosphino)aniline (PNH(2)) complexes [Au(C(6)F(5))(2)X(PNH(2))] (X = C(6)F(5) (1), Cl (2)) have been obtained from [Au(C(6)F(5))(3)(tht)] or [Au(C(6)F(5))(2)(micro-Cl)](2) and PNH(2), and the cationic [Au(C(6)F(5))(2)(PNH(2))]ClO(4) (3) has been similarly prepared from [Au(C(6)F(5))(2)(OEt(2))(2)]ClO(4) and PNH(2) or from 2 and AgClO(4). The neutral amido complex [Au(C(6)F(5))(2)(PNH)] (4) can be obtained by deprotonation of 3 with PPN(acac) (acac = acetylacetonate) or by treatment of the chloro complex 2 with Tl(acac). It reacts with [Ag(OClO(3))(PPh(3))] or [Au(OClO(3))(PPh(3))] to give the dinuclear species [Au(C(6)F(5))(2)[PNH(MPPh(3))]]ClO(4) (M = Ag (5), Au (6)). The latter can also be obtained by reaction of equimolar amounts of 3 and [Au(acac)(PPh(3))]; when the molar ratio of the same reagents is 1:2, the trinuclear cationic complex [Au(C(6)F(5))(2)[PN(AuPPh(3))(2)]]ClO(4) (7) is obtained. The crystal structures of complexes 2-4 and 7 have been established by X-ray crystallography; the last-mentioned displays an unusual Au(I)-Au(III) interaction.     

Hydrothermal syntheses, crystal structures, and characteristics of a series of Cd-btx coordination polymers (btx = 1,4-Bis(triazol-1-ylmethyl)benzene)

Four novel cadmium-btx (btx = 1,4-bis(triazol-1-ylmethyl)benzene) coordination polymers [Cd(btx)(2)(NO(3))(2)](n)(1), [Cd(btx)(2)Cl(2)](n)(2), [Cd(btx)(SO(4))(H(2)O)(2)](n)(3), and [Cd(btx)(S(2)O(7))(H(2)O)](n)(4) have been prepared by hydrothermal reaction (140 or 180 degrees C) and characterized. Both 1 and 2 have two-dimensional rhombohedral grid structures, 3 possesses a two-dimensional rectangular grid structure, and 4 displays a three-dimensional framework, which is formed by btx bridging parallel layers. To the author's best knowledge, polymer 4 is the first Cd(II) polymer in which the Cd(II) ion is eight-coordinated in a hexagonal bipyrimidal geometry. In addition, we studied the effects of temperature on the hydrothermal reaction system of btx and CdSO(4) and found that different products can be obtained at different temperatures. Furthermore, polymer 3 possesses a very strong third-order NLO absorptive effect with an alpha(2) value of 1.15 x 10(-)(9) m W(-1). Polymers 2-4 display strong fluorescent emissions in the solid state at room temperature. The DTA and TGA results of the four polymers are in agreement with the crystal structures.     

Synthesis, reactivity, and DFT studies of tantalum complexes incorporating diamido-N-heterocyclic carbene ligands. Facile endocyclic C-H bond activation

The syntheses of tantalum derivatives with the potentially tridentate diamido-N-heterocyclic carbene (NHC) ligand are described. Aminolysis and alkane elimination reactions with the diamine-NHC ligands, (Ar)[NCN]H(2) (where (Ar)[NCN]H(2) = (ArNHCH(2)CH(2))(2)(C(3)N(2)); Ar = Mes, p-Tol), provided complexes with a bidentate amide-amine donor configuration. Attempts to promote coordination of the remaining pendent amine donor were unsuccessful. Metathesis reactions with the dilithiated diamido-NHC ligand ((Ar)[NCN]Li(2)) and various Cl(x)Ta(NR'(2))(5-)(x) precursors were successful and generated the desired octahedral (Ar)[NCN]TaCl(x)(NR'(2))(3-)(x) complexes. Attempts to prepare trialkyl tantalum complexes by this methodology resulted in the formation of an unusual metallaaziridine derivative. DFT calculations on model complexes show that the strained metallaaziridine ring forms because it allows the remaining substituents to adopt preferable bonding positions. The calculations predict that the lowest energy pathway involves a tantalum alkylidene intermediate, which undergoes C-H bond activation alpha to the amido to form the metallaaziridine moiety. This mechanism was confirmed by examining the distribution of deuterium atoms in an experiment between (Mes)[NCN]Li(2) and Cl(2)Ta(CD(2)Ph)(3). The single-crystal X-ray structures of (p)(-Tol)[NCNH]Ta(NMe(2))(4) (3), (Mes)[NCNH]Ta=CHPh(CH(2)Ph)(2) (4), (p)(-Tol)[NCN]Ta(NMe(2))(3) (7), (Mes)[NCCN]Ta(CH(2)(t)Bu)(2) (11), and (Mes)[NCCN]TaCl(CH(2)(t)Bu) (14) are included.     

Syntheses, crystal structures and properties of new lead(II) or bismuth(III) selenites and tellurite

Four new lead(II) or bismuth(III) selenites and a tellurite, namely, Pb(3)(TeO(3))Cl(4), Pb(3)(SeO(3))(2)Br(2), Pb(2)Cd(3)(SeO(3))(4)I(2)(H(2)O), Pb(2)Ge(SeO(3))(4) and BiFe(SeO(3))(3), have been prepared and structurally characterized by single crystal X-ray diffraction (XRD) analyses. These compounds exhibit five different types of structures. The structure of Pb(3)(TeO(3))Cl(4) features a three-dimensional (3D) lead(II) chloride network with tellurite anions filling in the 1D tunnels of Pb(4) 4-member rings (MRs) along the c-axis. Pb(3)(SeO(3))(2)Br(2) contains a 3D network composed of lead(II) selenite layers interconnected by bromide anions. Pb(2)Cd(3)(SeO(3))(4)I(2)(H(2)O) is a 3D structure based on 2D cadmium(II) selenite layers which are further connected by 1D lead(II) iodide ladder chains with lattice water molecules located at the 1D tunnels of the structure. Pb(2)Ge(SeO(3))(4) features a 3D framework constructed by the alternate arrangement of lead(II) selenite layers and germanium(iv) selenite layers in the [100] direction. The structure of BiFe(SeO(3))(3) is built on the 3D anionic framework of ion(III) selenite with the bismuth(III) ions located at its Fe(6)Se(6) 12-MR tunnels. Pb(3)(TeO(3))Cl(4) (Pna2(1)) is polar and BiFe(SeO(3))(3) (P2(1)2(1)2(1)) is noncentrosymmetric. Powder second-harmonic generation (SHG) measurements using 1064 nm radiation indicate that BiFe(SeO(3))(3) exhibits a weak SHG efficiency of about 0.2 × KH(2)PO(4) (KDP). Magnetic property measurements for BiFe(SeO(3))(3) show a dominant antiferromagnetic interaction with weak spin-canting at low temperatures. IR, UV-vis and thermogravimetric, as well as electronic structure calculations were also performed.     

Solid-state and solution-state coordination chemistry of the zinc triad with the mixed N,S donor ligand bis(2-methylpyridyl) sulfide

The binding of group 12 metal ions to bis(2-methylpyridyl) sulfide (1) was investigated by X-ray crystallography and NMR. Seven structures of the chloride and perchlorate salts of Hg(II), Cd(II), and Zn(II) with 1 are reported. Hg(1)(2)(ClO(4))(2), Cd(1)(2)(ClO(4))(2), and Zn(1)(2)(ClO(4))(2).CH(3)CN form mononuclear, six-coordinate species in the solid state with 1 binding in a tridentate coordination mode. Hg(1)(2)(ClO(4))(2) has a distorted trigonal prismatic coordination geometry while Cd(1)(2)(ClO(4))(2) and Zn(1)(2)(ClO(4))(2).CH(3)CN have distorted octahedral geometries. With chloride anions, the 1:1 metal to ligand complexes Hg(1)Cl(2), [Cd(1)Cl(2)](2), and Zn(1)Cl(2) are formed. A bidentate binding mode that lacks thioether coordination is observed for 1 in the four-coordinate, distorted tetrahedral complexes Zn(1)Cl(2) and Hg(1)Cl(2). [Cd(1)Cl(2)](2) is dimeric with a distorted octahedral coordination geometry and a tridentate 1. Hg(1)Cl(2) is comprised of pairs of loosely associated monomers and Zn(1)Cl(2) is monomeric. In addition, Hg(2)(1)Cl(4) is formed with alternating chloride and thioether bridges. The distorted square pyramidal Hg(II) centers result in a supramolecular zigzagging chain in the solid state. The solution (1)H NMR spectra of [Hg(1)(2)](2+) and [Hg(1)(NCCH(3))(x)()](2+) reveal (3)(-)(5)J((199)Hg(1)H) due to slow ligand exchange found in these thioether complexes. Implications for use of Hg(II) as a metallobioprobe are discussed.