Thermodynamic properties of CO2 absorption in hydroxyl ammonium ionic liquids at pressures of (100–1600) kPa

Solubility of CO₂ in six hydroxyl ammonium ionic liquids 2-hydroxyethanaminium acetate [hea], bis(2-hydroxyethyl)ammonium acetate [bheaa], 2-hydroxy-N-(2-hydroxyethyl)-N-methylethanaminium acetate [hhemea], 2-hydroxyethanaminium lactate [hel], bis(2-hydroxyethyl)ammonium lactate [bheal], 2-hydroxy-N-(2-hydroxyethyl)-N-methylethanaminium lactate [hhemel] at temperatures (298.15, 313.15, and 328.16) K and pressures ranging from (100 to 1600) kPa was determined. From the experimental solubility data, the Henry’s constant of CO₂ for each hydroxyl ammonium ionic liquids was estimated and reported as a function of temperature. Furthermore, enthalpy and entropy of absorption were obtained from estimated Henry’s constant. The results showed that the solubility increase with increasing pressure and decrease with increasing temperature and the solubility of CO₂ in these six hydroxyl ammonium ionic liquids was in sequence: [hea] > [bheaa] > [hel] > [bheal] > [hhemel] > [hhemea].     

Solubility of gases in fluoroorganic alcohols. Part II. Solubilities of noble gases in (water + 1,1,1,3,3,3-hexafluoropropan-2-ol) at 298.15 K and 101.33 kPa

Solubilities of noble gases He, Ne, Ar, Kr and Xe in mixtures of {water + 1,1,1,3,3,3-hexafluoropropan-2-ol (HFIP)} at 298.15 K and 101.33 kPa partial pressure of gas are reported. A polynomial dependence of the solubilities on the mole fraction of the binary liquid mixture is found. The Henry’s constants at the vapor pressure of the mixture, the standard changes in the Gibbs free energy for the solution process and for the solvation process, and the so-called excess Henry’s constant are calculated. The results have been compared with those obtained by scaled particle theory (SPT).     

Solubilities of carbon dioxide in the eutectic mixture of levulinic acid (or furfuryl alcohol) and choline chloride

The solubilities of carbon dioxide (CO₂) in the renewable deep eutectic solvents (DESs) containing levulinic acid (or furfuryl alcohol) and choline chloride were determined at temperatures (303.15, 313.15, 323.15, and 333.15) K and pressures up to 600.0 kPa using an isochoric saturation method. The mole ratios of levulinic acid (or furfuryl alcohol) to choline chloride were fixed at 3:1, 4:1 and 5:1. Standard Gibbs free energy, dissolution enthalpy and dissolution entropy were calculated from Henry’s law constant of CO₂ in the DESs. Results indicated that levulinic acid based DESs are more effective to capture CO₂ than furfuryl alcohol based ones. The solubility of CO₂ in the DESs increased with increasing mole ratio of levulinic acid (or furfuryl alcohol) to choline chloride as well as pressure and decreased with increasing temperature.     

Enthalpy of absorption and limit of solubility of CO2 in aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol, 2-[2-(dimethyl-amino)ethoxy] ethanol,and 3-dimethyl-amino-1-propanol at T = (313.15 and 353.15) K and pressures up to 2 MPa

In order to study the influence of amine structure on absorption of carbon dioxide, enthalpies of solution of CO₂ in 2.50 mol · L^?1 aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol (THAM), 2-[2-(dimethyl-amino)ethoxy] ethanol (DMAEOE), and 3-dimethyl-amino-1-propanol (DMAP) were measured. The enthalpies of solution are determined as function of gas loading charge (moles of CO₂/mole of amine), at temperatures (313.15 and 353.15) K, and pressures range from (0.5 to 2) MPa. Measurements were carried out using a flow calorimetric technique. CO₂ solubilities in the aqueous solutions of amine are derived from calorimetric data. Molar volumes of aqueous amine solutions required to handle calorimetric data were determined at 303.15 K using a vibrating tube densimeter. Experimental enthalpies of solution are discussed on the basis of amines alkalinity.     

High pressure measurement and CPA equation of state for solubility of carbon dioxide and hydrogen sulfide in 1-butyl-3-methylimidazolium acetate

Removal of acid gases such as CO₂ and H₂S from natural gas is essential for commercial, safety and environmental protection that demonstrate the importance of gas sweetening process. Ionic liquids (IL) have been highly demanded as a green solvent to remove acid gases from sour natural gas and capturing of CO₂ from flue gases. In this work, the solubility of CO₂ in 1-butyl-3-methylimidazolium acetate ([bmim][Ac]) is measured at temperatures (303.15, 328.15, 343.15) K and pressure range of (0.1 to 3.9) MPa. Moreover, the experiments are carried out for simultaneous measurements of (CO₂ + H₂S) (70% + 30% on a mole basis) solubility in the same ionic liquid at T = (303.15, 323.15, 343.15) K and a pressure range of (0.1 to 2.2) MPa. To model the solubility of acid gases in IL, both physical and chemical equilibria are applied so that the (vapour + liquid) equilibrium calculation is carried out through Cubic-Plus-Association (CPA) EoS. The reaction equilibrium thermodynamic model is used in liquid phase so that the chemical reaction is taking place between IL and acid gasses. The Henry’s and reaction equilibrium constants are obtained though optimization of the solubility data. Using CPA EOS, the pure parameters of [bmim][acetate] are optimised and consequently using these parameters, gas partial pressure calculation is performed for the (CO₂ + IL) and (CO₂ + H₂S + IL) systems. For the (CO₂ + IL) system, the percent average absolute deviation (AAD%) of 4.83 is resulted and for the (H₂S + CO₂ + IL) system the values of 18.8 and 13.7 are obtained for H₂S and CO₂, respectively.     

Enthalpy of solution of CO2 in aqueous solutions of 2-amino-2-methyl-1-propanol

The enthalpies of solution of CO₂ in aqueous solution of 2-amino-2-methyl-1-propanol (AMP) 15 wt% and 30 wt% were measured at 322.5 K and pressures range from (0.2 to 5) MPa using a flow calorimetric technique. The gas solubilities were simultaneously determined from the calorimetric data. The solubilities were compared to available literature values obtained by direct measurements. The experimental enthalpies of solution were compared to the values derived from the literature vapor liquid equilibrium data. This work provides calorimetric data that will be used later for the development of a thermodynamic model to predict both solubilities and enthalpies of solution of acid gases in aqueous amine solutions.     

Measuring the solubility of CO2 and H2S in sulfolane and the density and viscosity of saturated liquid binary mixtures of (sulfolane + CO2) and (sulfolane + H2S)

The density and viscosity of liquid sulfolane saturated (loaded) with single CO₂ and H₂S gases were measured simultaneously with the solubility of the single CO₂ and H₂S gases in sulfolane at temperatures ranging from (303.15 to 363.15) K and pressures of up to about 2.4 MPa using a new experimental set-up developed in our laboratory. The experimental density and viscosity values were correlated using a modified Setchenow-type equation. It was observed that the density and viscosity of mixtures decrease by increasing temperature and acid gas solubility (loading) in sulfolane. Acid gas loading has a much profounder effect on the viscosity of solutions than on their density, i.e. at a concentration of 1 mol CO₂/H₂S per kg of sulfolane the density decreases by less than 3%, but viscosity decreases by more than 30%. Results show that at fixed temperature and pressure H₂S is more than four times as soluble as CO₂ in sulfolane. The measured solubility and density values were respectively used to obtain Henry’s law constants and partial molar volumes at infinite dilution for dissolution of CO₂ and H₂S gases in the liquid sulfolane at the temperatures studied. The Henry’s law constants obtained at different temperatures were used to determine infinite dilution partial molar thermodynamic functions (Gibbs free energy, enthalpy and entropy) of solution. The measured solubility data were correlated by using a model comprised of the extended Henry’s law and the Pitzer’s virial expansion for the excess Gibbs free energy.     

Low pressure solubility and thermodynamics of solvation of oxygen,carbon dioxide,and carbon monoxide in fluorinated liquids

The solubility of oxygen, carbon dioxide, and carbon monoxide in three fluorinated liquids – perfluorohexylethane, perfluorooctane and bromoperfluorooctane – is presented. Mole fraction solubilities were calculated from new experimental Ostwald coefficient data for CO₂ and CO, and from previously published values for O₂, associated with original values of density and vapour pressure for the pure solvents. Carbon dioxide is the most soluble gas with mole fraction solubilities of the order of 10⁻². Oxygen and carbon monoxide are one order of magnitude less soluble. The measurements were done as a function of temperature between (288 and 313) K and from the variation of the calculated Henry’s law constants with temperature, the thermodynamic properties of solvation such as the Gibbs free energy, the enthalpy and the entropy were calculated. The precision of the experimental data, considered as the average absolute deviation of the Henry’s law constants from appropriate smoothing equations is of 1% for carbon dioxide and oxygen and of 3% for carbon monoxide. The data obtained here are judged accurate to within ±5%.     

Phase behavior of {carbon dioxide + [bmim][Ac]} mixtures

Carbon dioxide solubility {(vapor + liquid) equilibria: VLE} in ionic liquid, 1-butyl-3-methylimidazolium acetate ([bmim][Ac]), has been measured with a gravimetric microbalance at four isotherms about (283, 298, 323, and 348) K up to about 2 MPa. (Vapor + liquid + liquid) equilibria (VLLE: or liquid–liquid separations) have also been investigated with a volumetric method used in our previous works, since the present analysis of the VLE data using our equation-of-state model has predicted the VLLE at CO₂-rich side solutions. The prediction for the VLLE has been confirmed experimentally. CO₂ solubilities at the ionic liquid-rich side show extremely unusual behaviors; CO₂ dissolves in the ionic liquid to a great degree, but there is hardly any vapor pressure above these mixtures up to about 20 mol% of CO₂. It indicates that CO₂ may have formed a non-volatile or very low vapor pressure molecular complex with the ionic liquid. The thermodynamic excess properties (enthalpy, entropy, and Gibbs free energy) of the present system do support such a complex formation. We have conducted several other experiments to investigate the complex formation (or chemical reactions), and conclude that a minor chemical reaction occurs but the complex formation is reversible without much degradation of the ionic liquid.     

Solubility of carbon dioxide,ethane, methane,oxygen, nitrogen,hydrogen, argon,and carbon monoxide in 1-butyl-3-methylimidazolium tetrafluoroborate between temperatures 283 K and 343 K and at pressures close to atmospheric

Experimental values for the solubility of carbon dioxide, ethane, methane, oxygen, nitrogen, hydrogen, argon and carbon monoxide in 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF₄] – a room temperature ionic liquid – are reported as a function of temperature between 283 K and 343 K and at pressures close to atmospheric. Carbon dioxide is the most soluble gas with mole fraction solubilities of the order of 10⁻². Ethane and methane are one order of magnitude more soluble than the other five gases that have mole fraction solubilities of the order of 10⁻⁴. Hydrogen is the less soluble of the gaseous solutes studied. From the variation of solubility, expressed as Henry’s law constants, with temperature, the partial molar thermodynamic functions of solvation such as the standard Gibbs energy, the enthalpy, and the entropy are calculated. The precision of the experimental data, considered as the average absolute deviation of the Henry’s law constants from appropriate smoothing equations is of 1%.     

Solubility and diffusion of CO2 and H2S in the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate

The solubility and diffusion coefficient were determined for carbon dioxide and hydrogen sulfide gases in the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([emim][EtSO₄]) at temperatures ranging from (303.15 to 353.15) K and pressures up to 1.6 MPa. The Krichevsky–Kasarnovsky equation was used to correlate solubility data and Henry’s law constants at different temperatures were obtained. The partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated using the solubility data. A semi-infinite volume approach is used to obtain the diffusion coefficients for CO₂ and H₂S and a correlation equation with temperature is presented for each gas. Comparison showed that H₂S is more soluble than CO₂ and its diffusion coefficient is about two orders of magnitude as that of CO₂ in the ionic liquid studied in this work.     

Gas solubility of CO2 in aqueous solutions of N-methyldiethanolamine and diethanolamine with 2-amino-2-methyl-1-propanol

Gas solubility of carbon dioxide in an aqueous solution of 32.5 wt.% N-methyldiethanolamine and 12.5 wt.% diethanolamine with 4, 6, and 10 wt.% 2-amino-2-methyl-1-propanol has been measured, at 313.15, 343.15, and 393.15 K, over a range of pressure from 3 to 2000 kPa, using a chromatographic method for analysis of the liquid phase. The results of the gas solubility are given as the partial pressure of CO₂ against its mole ratio α (mol CO₂/mol alkanolamine) and its mole fraction at each temperature studied. The solubility of CO₂ in all the systems studied decreases with an increase in temperature and increases with an increase in the partial pressure of CO₂ at a given temperature and it is a function of the concentration of the mixture of alkanolamines in solution. The enthalpy of solution of CO₂ has been calculated from the experimental solubility data.     

Enthalpy of solution of CO2 in aqueous solutions of methyldiethanolamine at T = 372.9 K and pressures up to 5 MPa

Experimental enthalpies of solution of CO₂ in aqueous solution of methyldiethanolamine (MDEA) of 15 wt% and 30 wt% are reported. The measurements were performed using a flow calorimetric technique at temperature of 372.9 K and pressures range from 0.5 MPa to 5 MPa. Gas solubilities data at same temperature and pressures were derived from the enthalpy data. Experimental enthalpies of solution are combined with available literature data in order to examine pressure and composition influences.     

Density,viscosity, and N2O solubility of aqueous amino acid salt and amine amino acid salt solutions

Physicochemical properties of aqueous amino acid salt (AAS), potassium salt of sarcosine (KSAR) and aqueous amine amino acid salt (AAAS), 3-(methylamino)propylamine/sarcosine (SARMAPA) have been studied. Densities of KSAR were measured for sarcosine mole fraction 0.02 to 0.25 for temperature range 298.15 K to 353.15 K, the viscosities were measured for 0.02 to 0.10 mole fraction sarcosine (293.15 K to 343.15 K) while the N₂O solubilities were measured from 0.02 to 0.10 mole fraction sarcosine solutions (298.15 K to 363.15 K). Densities of SARMAPA were measured for sarcosine mole fraction 0.02 to 0.23 for temperature range (298.15 K to 353.15 K), viscosities were measured for 0.02 to 0.16 mole fraction sarcosine (293.15 K to 343.15 K) while the N₂O solubilities were measured from 0.02 to 0.16 mole fraction sarcosine solutions (298.15 K to 343.15 K). Experimental results were correlated well with empirical correlations and N₂O solubility results for KSAR were predicted adequately by a Schumpe model. The solubilities of N₂O in AAS and AAAS are significantly lower than values for amines. The solubilities vary as: amine > AAAS > AAS.     

Henry’s constant of carbon dioxide-aqueous deep eutectic solvent (choline chloride/ethylene glycol,choline chloride/glycerol,choline chloride/malonic acid) systems

In this study, we present a new set of Henry’s constant data for the system carbon dioxide-aqueous deep eutectic solvent (DES) (20 to 80 wt% DES) at T = (303.15, 308.15, and 313.15) K. The DESs used were choline chloride-based: ethaline (choline chloride/ethylene glycol), glyceline (choline chloride/glycerol), and maline (choline chloride/malonic acid). A differential Henry’s coefficient model was used to describe the behaviour of Henry’s constant, and correlate it with temperature and concentration of DES in the aqueous DES solution. The correlation was found satisfactory such that the proposed model can be used in engineering calculations with reasonable accuracy.     

Enthalpy of solution of CO2 in aqueous solutions of methyldiethanolamine at T = 322.5 K and pressure up to 5 MPa

Enthalpies of solution of CO₂ in aqueous solution of methyldiethanolamine (MDEA) are determined for two different concentrations, respectively, 15 wt% and 30 wt%, at the temperature of 322.5 K and at pressures up to 5 MPa using a flow calorimetric technique. Gas solubilities were consequently deduced from the calorimetric data and compared to available literature values. Experimental enthalpies of solution were compared to direct measurements and to values derived from VLE data available using a simple model based on ideal property considerations.     

Measurement and correlation of the solubility of MnSO4·H2O with MgSO4·7H2O in MeOH + H2O solution

Data on the solubility of manganese sulphate monohydrate in water, and in aqueous alcohols is essential for salting-out crystallization studies. The solubilities for the quaternary system MnSO₄·H₂O + MgSO₄·7H₂O + H₂O + MeOH solution were determined in the temperature ranges 293.2–308.2 K over the mole fraction methanol ranges of 0.00–0.16. The solubility data were used for modelling with the modified extended electrolyte non-random two-liquid (NRTL) equation. The present extension uses ion-specific parameters instead of the electrolyte-specific NRTL binary interaction parameters. This approach has feasibility for many electrolytes and mixed aqueous solution systems principally. The model was found to correlate the solubility data satisfactory.     

(Vapour + liquid) equilibria (VLE) of CO2 in aqueous solutions of 2-amino-2-methyl-1-propanol: New data and modelling using eNRTL-equation

This work presents new experimental results for carbon dioxide (CO₂) solubility in aqueous 2-amino-2-methyl-1-propanol (AMP) over the temperature range of (298 to 328) K and CO₂ partial pressure of about (0.4 to 1500) kPa. The concentrations of the aqueous AMP lie within the range of (2.2 to 4.9) mol · dm^?3. A thermodynamic model based on electrolyte non-random two-liquid (eNRTL) theory has been developed to correlate and predict the (vapour + liquid) equilibrium (VLE) of CO₂ in aqueous AMP. The model predictions have been in good agreement with the experimental data of CO₂ solubility in aqueous blends of this work as well as those reported in the literature. The current model can also predict speciation, heat of absorption, enthalpy of CO₂ loaded aqueous AMP, pH of the loaded solution, and AMP volatility.     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].     

(Liquid + solid) metastable equilibria in quinary system Li2CO3 + Na2CO3 + K2CO3 + Li2B4O7 + Na2B4O7 + K2B4O7 + H2O at T=288 K for Zhabuye salt lake

An experimental study on metastable equilibria at T=288 K in the quinary system Li₂CO₃ + Na₂CO₃ + K₂CO₃ + Li₂B₄O₇ + Na₂B₄O₇ + K₂B₄O₇ + H₂O was done by isothermal evaporation method. Metastable equilibrium solubilities and densities of the solution were determined experimentally. According to the experimental data, the metastable equilibrium phase diagram under the condition saturated with Li₂CO₃ was plotted, in which there are four invariant points; nine univariant curves; six fields of crystallization: K₂CO₃ · 3/2H₂O, K₂B₄O₇ · 5H₂O, Li₂B₂O₄ · 16H₂O, Na₂B₂O₄ · 8H₂O, Na₂CO₃ · 10H₂O, NaKCO₃ · 6H₂O. Some differences were found between the stable phase diagram at T=298 K and the metastable one at T=288 K.