Phosphasilaallenes >Si = C = P− and phosphagermaallenes >Ge = C = P−

Phosphasilaallene Tip(Ph)Si = C = PMes* (Tip = 2,4,6-triisopropylphenyl, Mes* = 2,4,6-tri-tert-butylphenyl) and phosphagermaallene Mes₂Ge = C = PMes* (Mes = 2,4,6-trimethylphenyl) have been obtained by dehalogenation of their corresponding dihalophosphametallapropenes > E(X)-C(X′) = P? by tert-butyllithium. They dimerize above ?40 °C by a cycloaddition involving two E = C double bonds or the E = C and the P = C double bonds but can be characterized at low temperature by trapping reactions and by low field shifts in ³¹P, ²⁹Si and particularly ¹³C NMR for the sp carbon atom. Owing to a small increase in the steric hindrance, phosphagermaallene Tip(t-Bu)Ge = C = PMes* can be stabilized and isolated. The Ge = C double bond undergoes nearly quantitative [2 + 1] cycloadditions with chalcogens and [2 + 2] cycloadditions with aldehydes or ketones. The surprisingly stable lithiochlorosilane R(Cl₂)Si-C(Li) = PMes* (R = 9-methylfluorenyl) behaves as a synthetic equivalent of the phosphasilaallene R(Cl)Si = C = PMes*. With two alkyl groups (t-Bu) on the germanium atom, the phosphagermaallene t-Bu₂Ge = C = PMes* is not obtained but its formal dimers 1,3-digermacyclobutanes have been isolated.     

Protonation thermodynamics of some aminophenol derivatives in NaCl(aq) (0 ⩽ I ⩽3 mol · kg−1) at T = 298.15 K

The acid–base properties of four aminophenol derivatives, namely m-aminophenol (L1), 4-amino-2-hydroxytoluene (L2), 2-amino-5-ethylphenol (L3) and 5-amino-4-chloro-o-cresol (L4), are studied by potentiometric and titration calorimetric measurements in NaCl_(aq) (0 ? I ? 3 mol · kg^?1) at T = 298.15 K. The dependence of the protonation constants on ionic strength is modelled by the Debye–Hückel, SIT (Specific ion Interaction Theory) and Pitzer equations. Therefore, the values of protonation constants at infinite dilution and the relative interaction coefficients are calculated. The dependence of protonation enthalpies on ionic strength is also determined. Distribution (2-methyl-1-propanol/aqueous solution) measurements allowed us to determine the Setschenow coefficients and the activity coefficients of neutral species. Experimental results show that these compounds behave in a very similar way, and common class parameters are reported, in particular for the dependence on ionic strength of both protonation constants and protonation enthalpies.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

Measurements of the critical parameters for {xNH3 + (1 − x)H2O} with x = (0.9098, 0.7757, 0.6808)

Measurements of the critical parameters for {xNH₃ + (1 ? x)H₂O} with x = (0.9098, 0.7757, 0.6808) were carried out by using a metal-bellows variable volumometer with an optical cell. The expanded uncertainties (k = 2) in temperature, pressure, density, and composition measurements have been estimated to be less than 3.2 mK, 3.2 kPa, 0.3 kg · m^?3, and 8.8 · 10^?4, respectively. In each mole fraction, the critical temperature T_c was first determined on the basis of the intensity of the critical opalescence. The critical pressure p_c and critical density ρ_c were then determined as the point at which the meniscus disappears on the isotherm at T = T_c. The expanded uncertainties (k = 2) in the present critical parameters have also been estimated. Comparisons of the present values with the literature data as well as the calculated values afforded using the equation of state are also presented.     

Thermodynamic study of (alkyl esters + α,ω-alkyl dihalides) III. HmEandVmE for 20 binary mixtures {xCu − 1H2u − 1CO2C4H9 + (1 − x)α,ω-ClCH2(CH2)v − 2CH2Cl}, where u = 1 to 4, α = 1 and v = ω = 2 to 6

In this article, the experimental data of excess molar enthalpies $H_{\mathrm{m}}^{\mathrm{E}}$ and excess molar volumes $V_{\mathrm{m}}^{\mathrm{E}}$ are presented for a set of 20 binary mixtures comprised of the first four butyl alkanoates (methanoate to butanoate) and five α,ω-dichloroalkanes (1,2-dichloroethane to 1,6-dichlorohexane), obtained at atmospheric pressure and at a temperature of 298.15 K. The results indicate the existence of specific interactions between both kinds of compounds resulting in exothermic processes for most mixtures, except for those containing butyl methanoate which give rise to net endo/exothermic effects. The $V_{\mathrm{m}}^{\mathrm{E}}$ are positive for mixtures of (butyl esters + 1,2-dichloroethane or 1,3-dichloropropane) and negative for the remaining ones. The change in $H_{\mathrm{m}}^{\mathrm{E}}$ with the dichloroethane chain length for a same ester is regular although the $V_{\mathrm{m}}^{\mathrm{E}}$ presents an irregular variation. It can, therefore, be deuced from this that the mixing process involves both effects, exothermic/endothermic and expansion/contraction, simultaneously. The behaviour of the mixtures is interpreted on the basis of the results observed and attributed to different effects taking place among the molecules studied.To improve application of the UNIFAC model using the version of Dang and Tassios, average values were recalculated again for parameters of the ester/chloride interaction, distinguishing, during its application, the functional group of the acid part of the ester. In spite of this, the model does not adequately reproduce the systems’ behaviour.     

Hydrothermal synthesis and thermodynamic properties of 2ZnO · 3B2O3 · 3H2O

The important zinc borate of 2ZnO · 3B₂O₃ · 3H₂O has been synthesized and characterized by means of chemical analysis, XRD, FT-IR, and DTA–TG techniques. The molar enthalpies of solution of H₃BO₃(s) in HCl · 54.561H₂O, of ZnO(s) in the mixture of HCl · 54.561H₂O and calculated amount of H₃BO₃, and of 2ZnO · 3B₂O₃ · 3H₂O(s) in HCl · 54.604H₂O were measured, respectively. With the use of the standard molar enthalpies of formation for ZnO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of ?(5561.7 ± 4.9) kJ · mol^?1 for 2ZnO · 3B₂O₃ · 3H₂O(s) was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

The oxygen deficient cubic perovskite SrFe1−xScxO3−δ (x ≤ 0.5; 0.1 ≤ δ ≤ 0.5): Structural features and physical properties

Solid state synthesis method has been used to stabilize oxygen deficient perovskite phases SrFe_1?xSc_xO_3?δ (0 ≤ x ≤ 0.5). The good homogeneity of samples is confirmed by energy dispersive spectroscopy (EDS) analysis performed with a transmission electronic microscope (TEM). By combining X-ray and electronic diffraction (ED), it is demonstrated that the cationic substitution on the B site of the perovskite induces a decrease of the oxygen content but without inducing long range ordering phenomenon. On this basis, X-ray patterns of compounds were indexed in the cubic Pm3m space group. The oxidation states of iron evidenced by Mössbauer spectroscopy, are in good agreement with the oxygen stoichiometries determined by cerimetric titration. In the SrFe_1?xSc_xO_3?δ series, the Fe³⁺/Fe⁴⁺ origin of the electronic conductivity is clearly evidenced. The limit compound SrFe_0.5Sc_0.5O_2.5 is highly resistive and characterized by a cluster glass-like behaviour. Finally, negative magnetoresistivity properties are revealed for the x = 0.1 and x = 0.2 samples, reaching ?10% around the magnetic transition temperature in a 7T magnetic field.     

Electrocatalysis on gold nanostructures: Is the {1 1 0} facet more active than the {1 1 1} facet?

The anisotropic electrocatalytic properties of gold nanobelts and nanoplates enclosed by either {1 1 0} or {1 1 1} facets were studied. Different strategies were used to synthesize these materials. It was found that the {1 1 0} surface of gold does not necessarily show a higher electrocatalytic activity than the {1 1 1} surface. The {1 1 0} surface of gold is more active than the {1 1 1} surface for glucose oxidation in both, neutral and alkaline media. However, for methanol oxidation in alkaline solution, the {1 1 0} surface shows a lower activity than the {1 1 1} surface, which is contrary to the general belief that {1 1 0} facet is the most active surface among the three basal planes. The possible mechanisms are discussed.     

Selective synthesis of zigzag-type aligned carbon nanotubes on SiC (0 0 0 −1) wafers

Zigzag-type carbon nanotubes have been selectively produced by surface decomposition of a well-polished SiC single crystal. The SiC wafer was heated to 1500 °C at a very small heating rate under vacuum. Transmission electron microscopy (TEM) and electron diffraction patterns revealed that almost all the well-aligned carbon nanotubes formed perpendicular to the SiC (0 0 0 −1) surface were double-walled and of zigzag type. The results of high-resolution electron microscopy (HREM) indicate that the zigzag type structure evolves from the Si–C hexagonal networks in the SiC crystal by the collapse of carbon layers remaining after the process of decomposition.     

Viscosity of {xCO2 + (1 − x)CH4} with x = 0.5174 for temperatures between (229 and 348) K and pressures between (1 and 32) MPa

A vibrating wire instrument, in which the wire was clamped at both ends, was used to measure the viscosity of {xCO₂ + (1 − x)CH₄} with x = 0.5174 with a combined uncertainty of 0.24 μPa · s (a relative uncertainty of about 0.8 %) at temperatures T between (229 and 348) K and pressures p from (1 to 32) MPa. The corresponding mass density ρ, estimated with the GERG-2008 equation of state, varied from (20 to 600) kg · m⁻³. The measured viscosities were consistent within combined uncertainties with data obtained previously for this system using entirely different experimental techniques. The new data were compared with three corresponding states-type models frequently used for predicting mixture viscosities: the Extended Corresponding States (ECS) model implemented in REFPROP 9.1; the SUPERTRAPP model implemented in MultiFlash 4.4; and a corresponding states model derived from molecular dynamics simulations of Lennard Jones fluids. The measured viscosities deviated systematically from the predictions of both the ECS and SUPERTRAPP models with a maximum relative deviations of 11 % at (229 K, 600 kg · m⁻³) and −16 % at (258 K, 470 kg · m⁻³), respectively. In contrast, the molecular dynamics based corresponding states model, which is predictive for mixtures in that it does not contain any binary interaction parameters, reproduced the density and temperature dependence of the measured viscosities well, with relative deviations of less than 4.2 %.     

Interactions in (l-phenylalanine/l-histidine + 0.01 mol · kg−1 aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K

Densities (ρ) and speeds of sound (u) have been measured for (l-phenylalanine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) and (l-histidine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K using the density and sound velocity Meter DSA 5000 M. The ρ and u values have been utilized to evaluate values of the partial molar volume (${\varphi }_v^{\circ }$), transfer partial molar volume (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_v^{\circ }$), partial molar isentropic compressibility (${\varphi }_k^{\circ }$), and transfer partial molar isentropic compressibility (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_k^{\circ }$) of the systems studied. The experimentally measured and calculated parameters have been interpreted in terms of host-guest and ion-hydrophilic interactions operative in the systems.     

Thermodynamics of formation of double salts M2SO4 · M′SO4 · 6H2O and M2SeO4 · M′SeO4 · 6H2O where M denotes Rb,or Cs and M′ denote Co,Ni, or Zn

This paper describes a chemical model that calculates (solid + liquid) equilibria in the (m₁Rb₂SO₄ + m₂CoSO₄)(aq), (m₁Rb₂SeO₄ + m₂CoSeO₄)(aq), (m₁Rb₂SO₄ + m₂NiSO₄)(aq), (m₁Rb₂SO₄ + m₂ZnSO₄)(aq), (m₁Rb₂SeO₄ + m₂ZnSeO₄)(aq), (m₁Cs₂SO₄ + m₂CoSO₄)(aq), (m₁Cs₂SeO₄ + m₂CoSeO₄)(aq), (m₁Cs₂SO₄ + m₂NiSO₄)(aq), (m₁Cs₂SeO₄ + m₂NiSeO₄)(aq), (m₁Cs₂SO₄ + m₂ZnSO₄)(aq), and (m₁Cs₂SeO₄ + m₂ZnSeO₄)(aq) systems, where m denotes molality at the temperature T=298.15 K. The Pitzer ion-interaction model has been used for thermodynamic analysis of the experimental osmotic and solubility data presented in the literature. The thermodynamic functions needed (binary and ternary parameters of ionic interaction, thermodynamic solubility products) have been calculated and the theoretical solubility isotherm has been plotted. The mixing parameters {θ(MN) and ψ(MNX)} have been chosen on the basis of the compositions of saturated ternary solutions and data on the binary solubility of the sulfate M₂SO₄. M^′SO₄ · 6H₂O double salts in water. To validate the mixing solutions model two different approaches have been used in evaluation of the ternary parameters: (I) preserving the same value of the binary mixing θ(MN) for the corresponding chloride, bromide, sulfate, and selenate systems with the same cations, and (II) with constant θ(MN) value (set equal to −0.05) for the all 11 sulfate and selenate systems. Very good agreement between experimentally determined and model predicted solubilities has been found. Important thermodynamic characteristics (thermodynamic solubility products, standard molar Gibbs free energy of formation) of the solid phases (simple salts, six sulfate – M₂SO₄ · M^′SO₄ · 6H₂O, and five selenate – M₂SeO₄ · M^′SeO₄ · 6H₂O – double salts) crystallizing in the systems under consideration are determined.