Mixed ligand complexation in the extraction of Dy(III) and Sm(III) with the HTTA-TBA synergic system

Synergic extraction of hydrolyzable lanthanides Dy(III) and Sm(III) has been studied in the low pH range with 0.3M (HTTA-TBA) in chloroform from aqueous perchlorate media. The synergic coefficient was calculated at different pH's and was found maximum at pH 3 for both elements. The composition of the adduct was established as M(TTA)₃.3TBA at pH 3. However, a mixture of the adduct of the type M(TTA)₃.TBA was proposed at pH 5.9. The possible reaction mechanism at both pHs is discussed, the stability constant _m,n formation constants K_m,o and K_m,n have been calculated.     

Synergic extraction of Eu(III) and Tb(III) by 2-thenoyltrifluoroacetone and tribenzylamine

Synergic extraction of Eu(III) and Tb(III) with 2-thenoyltrifluoroacetone (HTTA) and tribenzylamine (TBA) as neutral donor ligand has been studied in chloroform from perchlorate media at lower pH range. The stoichiometric composition of the adduct was established as M(TTA)₃ · 3TBA for both the elements, having a coordination number 9. The formation constants K_3,0 and K_3,3 and stability constant _3,3 of the organic phase reaction have been calculated. The effect of temperature on the extraction has also been studied. The adducts are stabilized by the large exothermic enthalpy change. The calculated thermodynamic functions such as H, S and G were used to elucidate the mechanism of synergism in which the coordination numbers of the lanthanide ions increased.     

Solvent extraction of Mn/II/ with 2-propionyl, 1-naphthol oxime/2-PRONAPOX/ into chloroform

A rapid method has been described for the quantitative extraction of milligram amounts of Mn/II/ with 2-PRONAPOX into CHCl₃. The extraction coefficient /E/ of Mn/II/ between CHCl₃ and aqueous solution containing 0.2M NH₄Cl shows a maximum value of E=143 at pH 10.5. The percentage extraction is better than 98% in the pH range from 9 to 11 and an equilibration time of 6 min. The effects of anions and cations have been studied. The stoichiometry of metal: reagent determined by substoichiometric extraction and slope ratio method is found to be 12. The decontamination factors for most of the elements are better than 10⁴ in the substoichiometric extraction of Mn/II/.     

Kinetics of the simultaneous oxidation of nickel(II) and sulfur(IV) by oxygen in alkaline medium in Ni(II)–sulfur(IV)–O2 system

In the Ni(II)–S(IV)–O₂ system in the region of pH > 8.4, both Ni(II) and S(IV) are simultaneously autoxidized, and when sulfur is consumed fully NiOOH precipitates. At pH > 8.4, ethanol has no effect on the rate, whereas ammonia strongly inhibits the reaction when pH > 7.0. The kinetics of the reaction, in both the presence and the absence of ethanol, is defined by the rate law where k is the rate constant, K_O is the equilibrium constant for the adsorption of O₂ on ? Ni(OH)₂ particle surface. In ammonia buffer, the factor F is defined by where K, K_OH, K₁, K₂, K₃, and K₄ are the stability constants of NiSO₃, NiOH⁺, Ni(NH₃)²⁺, Ni(NH₃), Ni(NH₃), and Ni(NH₃), respectively. In unbuffered medium, the factor F reduces to The values of k and K^sp were found to be (1.3 ± 0.08) × 10^?1 s^?1 and (4.2 ± 3.5) × 10^?16, respectively, at 30°C. A nonradical mechanism that assumes the adsorption of both SO₃^2? and O₂ on the ? Ni(OH)₂ particle surface has been proposed. At pH ≤ 8.2, Ni(II) displays no catalytic activity for sulfur(IV)‐autoxidation and it is also not oxidized to NiOOH. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 464–478, 2010     

Synergic extraction of Pr(III), Ho(III) and Er(III) with a mixture of 2-thenoylltrifluoroacetone and tribenzylamine

Synergic solvent extraction of Pr(III), Ho(III) and Er(III) was carried out at pH3.5 with a mixture of 2-thenoyltrifluoroacetone (HTTA) and tribenzylamine (TBA) from perchlorate media, having ionic strength 0.1M(H⁺, ClO ₄ ^– ). The stoichiometmric composition of all three synergic adducts was established to be Pr(TTA)₃·3TBA, Ho(TTA)₃·3TBA and Er(TTA)₃·3TBA. The formation constants K_TTA and K_syn and stability constant ±_syn were also computed and found to be in the order ErHo>Pr. The effect of various anions on the extraction has also been studied.     

Studies in nickel(IV) chemistry. Kinetics of the Cu(II) ion-mediated acid decomposition of tris(dimethylglyoximato) nickelate(IV) in aqueous acidic medium

Kinetics of the Cu(II) ion-mediated acid decomposition of tris (dimethylglyoximato)nickelate(IV), Ni(dmg)₃^2? (dmg^2? = dimethylglyoximate dianion), are reported in aqueous medium in the range of 3.6 ? pH ? 6.6 at 35°C and μ = 0.57 M. The pseudo-first-order rate constants of the disappearance of Ni(IV) k_obs(M) satisfy the equation where k_ad refers to the pseudo-first-order rate constants for the proton-assisted decomposition of the Ni(IV) complex determined independently and is a function of [H⁺], and k_dec(M) to that for the Cu(II) ion-mediated route and is a function of [H⁺] and [Cu²⁺]. Both k_obs(M) and k_dec(M) are found to increase with increasing [Cu(II)]₀, tending to attain limiting values at higher relative [Cu(II)]₀. At low [Cu(II)]₀ the k_dec(M) is found to register a decrease with increasing pH in the pH range of 3.6–4.4, then an increase in the range of 4.4–5.76, and again a decrease in the range of 5.76–6.6. Results on the Cu(II) ion-mediated acid decomposition are interpreted in terms of a probable mechanism involving pH-dependent adduct formation equilibria involving the one-protonated and the two-protonated species of Ni(IV) and the various species of Cu(II) ion in the media, followed by rate-determining acid decomposition of the adduct(s) to give Ni(II) aq. and Cu(dmgH)₂. While the two-protonated Ni(IV) complex apparently reacts about five orders of magnitude faster than the one-protonated species, the aquacopper(II) reacts about two orders of magnitude slower than the hydroxoaquacopper(II).     

The molecular and ionic solubility of nickel dimethylglyoximate

Values are reported for the solubility product constant and the ionization constant of nickel(II) dimethylglyoximate in aqueous solution. The solubility of nickel dimethylglyoximate in the investigated pH range from 2 to 9 is accounted for by the species Ni⁺² and Ni(HDx)₂; there is no evidence for the existence of a significant amount of NiHDx⁺.The extraction constant

has been calculated from the ionization constants of Ni(HDx)₂ and H₂Dx and the molecular solubilities of the former in water and chloroform.     

Solvent extraction of Ni/II/ with isonitrosobenzoylacetone into chloroform

A method has been developed for the quantitative extraction of Ni/II/ with isonitrosobenzoylacetone /HINBA/ into chloroform. The effect of various parameters on the extraction coefficient value such as pH, time of equilibration, effect of solvents, anions, cations etc. have been studied. The stoichiometry of the metal: reagent determined by the method of substoichiometric extraction and slope ratio method was found to be 12. Decontamination factors for many elements in the substoichiometric extraction of Ni/II/ were also evaluated.     

Complexation of Nickel(II) with Dioximes in Ni2[Fe(CN)6] Gelatin-Immobilized Matrix Implants

The complexation of Ni(II) with -dioximes, which occurs due to the contact of Ni₂[Fe(CN)₆] gelatin-immobilized matrix implants with water-alkaline (pH 12.0 ± 0.1) solutions of dimethylglyoxime, -benzyldioxime, and nioxime (H₂L) used as ligands, was studied. It was shown that in each system, the [Ni(HL)₂], [Ni(H₂L)₂]²⁺, and [Ni(H₂L)]²⁺ coordination compounds were formed, while in the Ni(II)–dimethylglyoxime system at pH > 13, the [NiL(OH₂)₂] complex was additionally formed.     

N,N,N′,N′-tetrabutylmalonamide as a new extractant for extraction of nitric acid and uranium(VI) in toluene

N,N,N,N-tetrabutylmalonamide (TBMA) was synthesized and used for extraction of uranyl(II) ion from nitric acid media in toluene. The effects of nitric acid concentration, extractant concentration, temperature and salting-out agent (LiNO₃) on distribution coefficients of uranyl(II) ion have been studied. The extraction of nitric acid is also studied. The main adduct of TBMA and HNO₃ is HNO₃. TBMA in 1.0 mol/l nitric acid solution. The 1:2:3 complex of uranyl(II) ion, nitrate ion and TBMA as extracted species is further confirmed by IR spectra of the extraction of uranyl(II) ion with TBMA, and found that the NO ₃ ^– in the extraction species UO₂(NO₃)₂·3TBMA did not participate in coordination of uranyl(II) ion. The values of thermodynamic parameters have also been calculated.     

Solvent extraction of cerium/III/ with 1-/2-pyridylazo/-2-naphthol from perchloric acid media

A study on solvent extraction of cerium/III/ ion with 1-/2-pyridylazo/-2-naphthol /PAN or HL/ in chloroform from perchloric acid solution is described. The effect of equilibrium time, the pH of the aqueous phase and the concentration centration of extractant in organic phase on the extraction efficiency of cerium/III/ has been studied. The results show that the mechanism of extraction reaction is 3Ce _/aq/ ³⁺ + 3HL_/o/ CeL_3/o/ + 3H ₊ ^/aq/     

Liquid–liquid extraction of scandium with nalidixic acid in dichloromethane

The extraction behavior of nalidixic acid (HNA) in CH₂Cl₂ has been studied for various di- and trivalent metal ions such as Cu(II), Fe(II), Ni(II), Mn(II), Sb(II), Co(II), Sc(III), Y(III), Nd(III) and Eu(III) from aqueous buffer solutions of pH 1–7 with 0.1 mol dm⁻³ nalidixic acid in dichloromethane. Separation factors of Sc(III) from these metals has shown that its clean separation is possible at pH 3.4–4. The parameters affecting the extraction of Sc(III) were optimized. The composition of the extracted adduct was determined by slope analysis method that came out to be Sc(NA)₃. Extraction of Sc(III) was studied in the presence of various cations and anions. Among the anions studied only fluoride, citrate and oxalate have significant interference whereas, Fe(III) has reduced the extraction to 53% that can be removed by using ascorbic acid as reducing agent. The proposed extraction system proved good stability up to six extraction-stripping stages for the extraction of Sc(III).     

Copper(II) and nickel(II) complexes of mono-oxocyclam(5-oxo-1,4,8,11-tetraazacyclotetradecane). Synthetic and potentiometric studies

Summary The macrocyclic mono-oxotetraamine, 5-oxo-1,4,8,11-tetraazacyclotetradecane (mono-oxocyclam=LH) has been prepared by reaction of methyl acrylate with 2,3,2-tetra(1,9-diamino-3,7-diazanonane). The protonation constants of the ligand are log K₁=9.40, log K₂=6.65 and log K₃=2.87 at 25 °C (I=0.1 mol dm^–3 NaClO₄). Detailed potentiometric studies of the interaction of the base with copper(II) and nickel(II) have been carried out. In the pH range 2.5–7.0 two complexes, [CuLH]²⁺ and [CuL]⁺, form; the deprotonated complex being 100% abundant at pH 7. For nickel(II), only [NiL]⁺ forms (log _11–1 = 3.90), the yellow low spin nickel complex reaching its maximum concentration above pH 6. The [CuL][ClO₄] · H₂O and [NiL][ClO₄] 0.5 H₂O complexes have been characterised in the solid state. The nickel(II) complex is square planar with a d-d band at 22625 cm^–1.     

Extraction of Ni(II) from nitrate media by Di-n-octylphosphinic acid dissolved in toluene

The extraction of Ni(II) from nitrate media of ionic strength 1.0 mol dm⁻³ by di-n-octylphosphinic acid (HR) in toluene solution has been studied over a range of pH and reagent concentrations. The data have been analysed both graphically and numerically to determine the stoichiometry of the extracted complexes and their extraction constants. Evidence was found for the formation of both NiR₂(HR)₄ (log K₂₄ = −9.14±0.06) and NiR₂(HR)₂ (logK₂₂ = −7.35±0.10), the former being the predominant species although the latter is important at low reagent concentrations and high pH values.     

Radiochemical and spectrophotometric investigations on the extraction equilibrium of ternary ion association thiocyanate complexes of cobalt(II) with nitrobluetetrazolium chloride (NBT) and triphenyltetrazolium chloride (TTC)

Extraction radiochemical investigations of ternary ion-association thiocyanate complexes of Co(II) with nitroblue tetrazolium chloride (NBT) [(3,3-dianizol-4,4-bis) 2-(4-nitrophenyl)-5-phenylnitrotetrazolium chloride] and triphenyltetrazolium chloride (TTC) [2,3,5-triphenyltetrazolium chloride] have been carried out. Molar ratios of the reacting components have been determined as NBT/[Co (SCN)₄]^2–=11 and TTC/[Co(SCN)₄]^2–=21. Using a chemical model and the method of Likussar — Boltz we have determined the values , K_ex and K_D, characterizing the extraction process. The results have been statistically treated. The relative standard deviation S_r has been calculated at a confidence level of 95%.     

Synergic effect of triphenylphosphine oxide (TPPO) on the extraction of Hg(II), Se(IV), Co(II) and Mn(II) with fluorinated pyrazolone (HPMTFP)

Extraction of Hg(II), Se(IV), Mn(II) and Co(II) has been carried out with 1-phenyl-3-methyl-4-trifluoroacetyl-2-pyrazolin-5-one (HPMTFP) and triphenylphosphine oxide (TPPO) into chloroform from pH 1–10. Quantitative extraction of Hg(II), Mn(II) and Co(II) at pH 4 with equimolar 0.05M (PMTFP+TPPO) in chloroform was observed. Se(IV) remains unextracted at this pH range. The stoichiometric composition of the extracted complexes M(PMTFP)₂·nH₂O (M=Mn, Hg), M(PMTFP)₂·2TPPO (M=Mn and Co) and Co(PMTFP)₂·TPPO·H₂O at less than 0.1M TPPO has been established. The formation constantsK _m,0 andK _m,n and stability constants _m,n have been computed. The analytical method developed was applied to the IAEA standard reference material (SRM) potato fluor V-4 for the determination of these elements using NAA technique.     

Solvent extraction of thorium from nitric acid solutions using di-N-butyl sulfoxide (DBSO) in xylene

The extraction of thorium(IV) from nitric acid solutions by di-n-butyl sulfoxide (DBSO) in xylene has been investigated as a function of acid, extractant and the metal concentration. The effect of contact time and diverse ions on the extraction has been examined. Phosphate, fluoride, oxalate and perchlorate reduce the extraction to some extent. The extraction of other metal ions, especially impurities associated with thorium in ores, has been measured under optimised conditions selected for thorium extraction. Na(I), K(I), Ca(II), Sr(II), Mn(II), Fe(II), Ni(II), Zn(II), Pb(II), Al(III), Ti(IV) and Hf(IV) are not extracted. Among the stripping solutions employed for back-extraction, deionized water is found to be the best and more than 99% thorium can be back-extracted in three stages. The extracted species is supposed to be Th(NO₃)₄·2DBSO. The extraction is found to be almost independent of the thorium concentration in the range between 4.3·10^–4–4.3·10^–2M and inversely dependent upon the temperature. The values of thermodynamic functions H, G and S for extraction equilibrium have been evaluated to be –19.6±2.9 kJ·mole^–1, –18.1±2.0 kJ·mole^–1 and –5.0±2.9 J·mole^–1·K^–1, respectively.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

Extraction-spectrophotometric determination of traces of copper(II), zinc(II), cadmium(II) and mercury(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Summary Sensitive extraction-spectrophotometric procedures are described for the complexes of Cu(II), Zn(II), Cd(II) and Hg(II) with 5-Br-PADAP using chloroform as solvent. Optimal conditions have been established for the quantitative extraction of the metal chelates and their composition and optical characteristics have been determined as well. The conditional extraction constants amount logK _ex=10, the molar absorptivities of the complexes being 10⁵ l·mole^–1·cm^–1. Job's method and equilibrium shift method indicate the molar ratios M5-Br-PADAP=12.

---

Spektralphotometrische Bestimmung von Spuren Cu(II), Zn(II), Cd(II) und Hg(II) mit 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)

Zusammenfassung Einfache und empfindliche Methoden zur extraktionsspektralphotometrischen Bestimmung von Spuren Cu(II), Zn(II), Cd(II) und Hg(II) mit 5-Br-PADAP wurden beschrieben. Chloroform wurde als Extraktionsmittel verwendet. Die optimalen Bedingungen für die quantitative Extraktion der Metallchelate wurden ermittelt und deren Zusammensetzung bestimmt. Die Stabilitätskonstanten haben hohe Werte (logK _ex=10), die molare Absorption der Komplexe beträgt 10⁵1·mol^–1·cm^–1. Das Molarverhältnis der Komplexe beträgt M5-Br-PADAP=12.

     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.