固体介质中SPH方法的拉伸不稳定性问题研究进展

光滑粒子流体动力学法(smoothed particle hydrodynamics, SPH)是一种基于核估计的无网格Lagrange数值方法.它用粒子方程离散流体动力学的连续方程, 既可以处理有限元难于处理的大变形和严重扭曲问题, 又可以处理有限差分法不易处理的自由边界和材料界面的问题, 在固体力学中的冲击、爆炸和裂纹模拟中具有广阔的发展前景.但是, 该算法的拉伸不稳定性(tensile instability)问题是它在固体力学领域中应用的最大障碍.对SPH稳定性分析表明, 算法不稳定性的条件仅与应力状态和核函数的2阶导数有关.目前, 应力点法(stress points)、Lagrange核函数法、人工应力法(artificialstress)、修正光滑粒子法(corrective smoothed particle method, CSPM)和守恒光滑法(conservativesmoothing)以及其他一些方法成功地改善了SPH的拉伸不稳定性, 但是每一种方法都不能彻底解决SPH的拉伸不稳定性问题.本文介绍了SPH法的方程和Von Neumann稳定性分析的思想, 以及国内外在这几个方面的研究成果及其最新进展, 同时指出目前研究中存在的问题和研究的方向.      

Coupling finite difference method with finite particle method for modeling viscous incompressible flows

A hybrid approach to couple finite difference method (FDM) with finite particle method (FPM) (ie, FDM-FPM) is developed to simulate viscous incompressible flows. FDM is a grid-based method that is convenient for implementing multiple or adaptive resolutions and is computationally efficient. FPM is an improved smoothed particle hydrodynamics (SPH), which is widely used in modeling fluid flows with free surfaces and complex boundaries. The proposed FDM-FPM leverages their advantages and is appealing in modeling viscous incompressible flows to balance accuracy and efficiency. In order to exchange the interface information between FDM and FPM for achieving consistency, stability, and convergence, a transition region is created in the particle region to maintain the stability of the interface between two methods. The mass flux algorithm is defined to control the particle creation and deletion. The mass is updated by N-S equations instead of the interpolation. In order to allow information exchange, an overlapping zone is defined near the interface. The information of overlapping zone is obtained by an FPM-type interpolation. Taylor-Green vortices and lid-driven shear cavity flows are simulated to test the accuracy and the conservation of the FDM-FPM hybrid approach. The standing waves and flows around NACA airfoils are further simulated to test the ability to deal with free surfaces and complex boundaries. The results show that FDM-FPM retains not only the high efficiency of FDM with multiple resolutions but also the ability of FPM in modeling free surfaces and complex boundaries.     

A consistent incompressible SPH method for internal flows with fixed and moving boundaries

An improved incompressible smoothed particle hydrodynamics (ISPH) method is presented, which employs first‐order consistent discretization schemes both for the first‐order and second‐order spatial derivatives. A recently introduced wall boundary condition is implemented in the context of ISPH method, which does not rely on using dummy particles and, as a result, can be applied more efficiently and with less computational complexity. To assess the accuracy and computational efficiency of this improved ISPH method, a number of two‐dimensional incompressible laminar internal flow benchmark problems are solved and the results are compared with available analytical solutions and numerical data. It is shown that using smaller smoothing lengths, the proposed method can provide desirable accuracies with relatively less computational cost for two‐dimensional problems. Copyright © 2015 John Wiley & Sons, Ltd.     

SPH方法Delaunay三角刨分与自由液面重构

光滑粒子法(SPH)作为一种拉格朗日型无网格方法,兼具欧拉网格方法和拉格朗日网格方法的优势,已经成功应用于科学和工程的众多领域。SPH方法后处理一般基于无规则分布的粒子,不如网格类方法后处理简便、直接。另外,SPH方法模拟自由液面流动等问题时,通过粒子位置难以重构自由液面的准确位置。发展一种基于Delaunay三角刨分的SPH后处理方法,即先基于SPH粒子位置利用Delaunay三角刨分建立三角网格,然后将粒子信息转化成网格单元/节点信息,从而可以在三角网格上进行后处理,实现基于网格方法的后处理功能,并可以在三角网格上直接提取或重构自由液面。将本文的方法应用到液滴碰撞和溃坝流SPH模拟结果的后处理中,得到了非常好的结果,表明本文的方法有效可靠。     

An SPH model for free surface flows with moving rigid objects

This paper presents a computational model for free surface flows interacting with moving rigid bodies. The model is based on the SPH method, which is a popular meshfree, Lagrangian particle method and can naturally treat large flow deformation and moving features without any interface/surface capture or tracking algorithm. Fluid particles are used to model the free surface flows which are governed by Navier–Stokes equations, and solid particles are used to model the dynamic movement (translation and rotation) of moving rigid objects. The interaction of the neighboring fluid and solid particles renders the fluid–solid interaction and the non‐slip solid boundary conditions. The SPH method is improved with corrections on the SPH kernel and kernel gradients, enhancement of solid boundary condition, and implementation of Reynolds‐averaged Navier–Stokes turbulence model. Three numerical examples including the water exit of a cylinder, the sinking of a submerged cylinder and the complicated motion of an elliptical cylinder near free surface are provided. The obtained numerical results show good agreement with results from other sources and clearly demonstrate the effectiveness of the presented meshfree particle model in modeling free surface flows with moving objects. Copyright © 2013 John Wiley & Sons, Ltd.     

An improved KGF‐SPH with a novel discrete scheme of Laplacian operator for viscous incompressible fluid flows

The kernel gradient free (KGF) smoothed particle hydrodynamics (SPH) method is a modified finite particle method (FPM) which has higher order accuracy than the conventional SPH method. In KGF‐SPH, no kernel gradient is required in the whole computation, and this leads to good flexibility in the selection of smoothing functions and it is also associated with a symmetric corrective matrix. When modeling viscous incompressible flows with SPH, FPM or KGF‐SPH, it is usual to approximate the Laplacian term with nested approximation on velocity, and this may introduce numerical errors from the nested approximation, and also cause difficulties in dealing with boundary conditions. In this paper, an improved KGF‐SPH method is presented for modeling viscous, incompressible fluid flows with a novel discrete scheme of Laplacian operator. The improved KGF‐SPH method avoids nested approximation of first order derivatives, and keeps the good feature of ‘kernel gradient free’. The two‐dimensional incompressible fluid flow of shear cavity, both in Euler frame and Lagrangian frame, are simulated by SPH, FPM, the original KGF‐SPH and improved KGF‐SPH. The numerical results show that the improved KGF‐SPH with the novel discrete scheme of Laplacian operator are more accurate than SPH, and more stable than FPM and the original KGF‐SPH. Copyright © 2015 John Wiley & Sons, Ltd.     

Advances in the simulation of multi‐fluid flows with the particle finite element method. Application to bubble dynamics

In this work, we extend the Particle Finite Element Method (PFEM) to multi‐fluid flow problems with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking interfaces. We develop a numerical scheme able to deal with large jumps in the physical properties, included surface tension, and able to accurately represent all types of discontinuities in the flow variables. The scheme is based on decoupling the velocity and pressure variables through a pressure segregation method that takes into account the interface conditions. The interface is defined to be aligned with the moving mesh, so that it remains sharp along time, and pressure degrees of freedom are duplicated at the interface nodes to represent the discontinuity of this variable due to surface tension and variable viscosity. Furthermore, the mesh is refined in the vicinity of the interface to improve the accuracy and the efficiency of the computations. We apply the resulting scheme to the benchmark problem of a two‐dimensional bubble rising in a liquid column presented in Hysing et al. (International Journal for Numerical Methods in Fluids 2009; 60 : 1259–1288), and propose two breakup and coalescence problems to assess the ability of a multi‐fluid code to model topology changes. Copyright © 2010 John Wiley & Sons, Ltd.     

复合圆柱壳冲击压缩数值模拟及稳定性研究

针对复合圆柱壳在炸药爆轰作用下的动力学响应及在此过程中伴随的失稳问题,研究了其制造工艺中可能出现的缺陷以及圆柱壳中铜线螺旋角和直径对复合圆柱壳稳定性产生的影响。采用SPH-FEM耦合算法,建立了复合圆柱壳二维细节模型,并提出了一种基于圆柱壳内壁粒子速度历史的失稳判据,计算了在不同参数条件下复合圆柱壳的失稳时间及对应的压缩率,对影响复合圆柱壳稳定性的因素进行了评估。分析结果表明,在复合圆柱壳制备过程中存在的折返层缺陷和铜线直径对复合圆柱壳的稳定性有较大影响,而螺旋角度对其稳定性影响不大。

     

超高速碰撞相似律的数值模拟验证

在量纲一分析的基础上,导出了超高速碰撞模拟中的相似律表达式,并利用光滑粒子流体动力学方法进行了数值模拟验证,结果表明,符合超高速碰撞相似律的模型在碰撞过程模拟中具有较好的相似性.     

Investigation on charge parameters of underwater contact explosion based on axisymmetric SPH method

This paper investigates the effects of charge parameters of the underwater contact explosion based on the axisymmetric smoothed particle hydrodynamics （SPH） method. The dynamic boundary particle is proposed to improve the pressure fluctuation and numerical accuracy near the symmetric axis. An in-depth study is carried out over the influence of charge shapes and detonation modes on the near-field loads in terms of the peak pressure and impulse of shock waves. For different charge shapes, the cylindrical charge with different length-diameter ratios may cause strong directivity of peak pressure and impulse in the near field. Compared with spherical charge, the peak pressure of cylindrical charge may be either weakened or enhanced in different directions. Within a certain range, the greater the length-diameter ratio is, the more obvious the effect will be. The weakened ratio near the detonation end may reach 25% approximately, while the enhanced ratio may reach around 20% in the opposite direction. However, the impulse in different directions seems to be uniform. For different detonation modes, compared with point-source explosion, the peak pressure of plane-source explosion is enhanced by about 5%. Besides, the impulse of plane-source explosion is enhanced by around 5% near the detonation end, but close to those of the point-source explosion in other directions. Based on the material constitutive relation in the axisymmetric coordinates, a simple case of underwater contact explosion is simulated to verify the above conclusions, showing that the charge parameters of underwater contact explosion should not be ignored.     

光滑粒子动力学方法的发展与应用

光滑粒子动力学(smoothed particle hydrodynamics,SPH)是一种拉格朗日型无网格粒子方法,已经成功地应用到了工程和科学的众多领域.SPH使用粒子离散及代表所模拟的介质,并且基于粒子体系估算和近似介质运动的控制方程.本文分析和综述了SPH模拟方法的发展历程、数值方法与应用进展.介绍了SPH方法的基本思想;从连续性、边界处理、稳定性和计算效率4个方面阐述了SPH方法的研究现状;介绍了SPH方法近年来在可压缩流动、不可压缩流动以及弹塑性材料高速变形与失效方面的一些典型应用;并对SPH方法的发展与应用进行了预测与展望.      

近边界三维水下爆炸气泡动态特性研究

模拟了近壁、近自由面的水下爆炸气泡的非线性动态特性,假定水下爆炸气泡脉动阶段的流场是无旋、不可压缩的,采用高阶曲面三角形单元离散三维气泡表面,用边界积分法求解气泡的运动,在计算奇异积分时通过重新构造双层位势的主值积分消除双层奇异积分的奇异性,得到更精确的结果,并通过合理的加权方法精确的求解边界面上各节点的真实速度,结合弹性网格技术（elastic mesh technique, EMT）得到优化速度,在整个模拟过程中不需要采用数值光顺。将本文的三维模型与轴对称模型进行的对比分析表明,两种模型计算结果吻合很好,并用三维模型模拟了气泡与自由表面及圆筒的相互作用,水下爆炸气泡在自由表面及圆筒的联合作用下呈现出强非线性。     

A stencil-like volume of fluid （VOF） method for tracking free interface

A stencil-like volume of fluid （VOF） method is proposed for tracking free interface. A stencil on a grid cell is worked out according to the normal direction of the interface, in which only three interface positions are possible in 2D cases, and the interface can be reconstructed by only requiring the known local volume fraction information. On the other hand, the fluid-occupying-length is defined on each side of the stencil, through which a unified fluid-occupying volume model and a unified algorithm can be obtained to solve the interface advection equation. The method is suitable for the arbitrary geometry of the grid cell, and is extendible to 3D cases. Typical numerical examples show that the current method can give ＂sharp＂ results for tracking free interface.     

A consistent and fast weakly compressible smoothed particle hydrodynamics with a new wall boundary condition

A modified weakly compressible smoothed particle hydrodynamics (WCSPH) is presented, which utilizes consistent discretization schemes for spatial derivatives in the flow equations. Here, each SPH particle is considered as a computational point that represents a specific part of the fluid. To overcome non‐physical oscillations that usually arise in standard WCSPH, we modified the mass conservation equation by using a numerical filter. This modification is based on the difference between two discretization schemes used for the term . Furthermore, a new implementation of wall boundary condition in SPH is introduced. This condition is imposed on the pressure of wall boundary particles to ensure that the acceleration of each boundary particle in normal direction to the wall is zero. Thus, no penetration through walls will occur. To examine the performance of the modified method, we solved a series of two‐dimensional incompressible internal flow benchmark problems. By comparing the result with analytical solutions and the results of the standard WCSPH, we show that the use of consistent schemes in conjunction with the proposed numerical filter improves both accuracy and speed of the numerical method. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamics of a small bubble in a compressible fluid

An efficient (simplified) method for solving problems of spherically symmetric dynamics of a small gas bubble in a compressible fluid is proposed. The method is based on the joint use of the full problem statement (the gas dynamics equations for the gas and the fluid) and its relevant simplifications. Some approximate statements are discussed. In the proposed method, the rarefaction and compression of the gas during the slow motion of the bubble surface is assumed to be uniform over the bubble volume. At the same time the fluid in the thin zone adjacent to the bubble is considered to be slightly compressible. Otherwise the gas dynamics equations are used for the gas and the fluid. The dynamics of the fluid in the thick external zone are described by the linear acoustics only. The proposed simplified method and two others used in literature are estimated by comparison of their numerical results with those obtained in full statement. Copyright © 2000 John Wiley & Sons, Ltd.     

Application of B‐splines and curved geometries to boundaries in SPH

Smoothed particle hydrodynamics (SPH) has been increasing in popularity rapidly in recent years and is being used for an ever wider range of applications. Central to almost all of these application is the inclusion of accurate wall boundaries. We present here a discussion of boundaries in SPH, in particular, focusing on reflected ghost‐particle boundaries. We show how one can include curved shapes as geometrical objects and more generally as parametric non‐uniform rational B‐spline (NURBS) curves. By properly considering the reflection operation, we derive a correction factor that demonstrably improves the accuracy of the SPH solution and present examples to confirm this. NURBS are standard for representing both 2D curves and 3D surfaces. We detail how they can be practically included in an SPH implementation, including how to calculate various required quantities and reflect particles in the NURBS object. Copyright © 2014 John Wiley & Sons, Ltd.     

Multiphase modelling of pouring glass over the spout lip of an industrial float in the flat glass forming process

This paper describes the numerical modelling of the three‐phase flow that is established when pouring molten glass onto a tin bath (float) under a non‐reactive atmosphere. Discharged from the furnace, the glass is spouted over a lip onto the bath, where it floats and spreads out in the form of a long ribbon, leading to the flat glass forming process. Numerically, the physical modelling must consider a multiphase problem with three immiscible phases: glass, tin and air. The simulation of this complex free‐surface flow involves the solution of the Navier–Stokes set of equations for all the phases simultaneously, using a volume‐of‐fluid formulation that introduces a marker function convected by the flow to identify each phase. The evolution of the interphases is tracked over time with the implementation of a continuous surface force algorithm. A general purpose, well‐tested commercial code, FLUENT, is employed for the computations. Firstly, a two‐dimensional model considering the symmetry plane of the float is developed to fit accurate physical and numerical parameters. The high complexity of the interphases in addition to great differences between the physical properties of the phases has required extensive tests to ensure the consistency and accuracy of the solutions. Afterwards, a complete three‐dimensional model is built to simulate the pouring process in a real geometry and predict the behaviour of the industrial facility when the operating conditions are modified. Typical flow phenomena inside the tin bath, such as tin currents, wet back flow or even the equilibrium thickness, are also obtained as a promising result of the numerical modelling. Copyright © 2008 John Wiley & Sons, Ltd.     

Conservation of circulation in SPH for 2D free‐surface flows

In this paper, we study how accurately the Smoothed Particle Hydrodynamics (SPH) scheme accounts for the conservation and the generation of vorticity and circulation, in a low viscosity, weakly compressible, barotropic fluid in the context of free‐surface flows. We consider a number of simple examples to clarify the processes involved and the accuracy of the simulations. The first example is a differentially rotating fluid where the integration path for the circulation becomes progressively more complicated, whereas the structure of the velocity field remains simple. The second example is the collision of two rectangular regions of fluid. We show that SPH accurately predicts the time variation of the circulation as well as the total vorticity for selected domains advected by the fluid. Finally, a breaking wave is considered. For such a problem we show how the dynamics of the vorticity generated by the breaking process is captured by the SPH model. Copyright © 2012 John Wiley & Sons, Ltd.     

A remedy for numerical oscillations in weakly compressible smoothed particle hydrodynamics

Weakly Compressible Smoothed Particle Hydrodynamics (WCSPH) can lead to non‐physical oscillations in the pressure and density fields when simulating incompressible flow problems. This in turn may result in tensile instability and sometimes divergence. In this paper, it is shown that this difficulty originates from the specific form of spatial discretization used for the pressure term when solving the mass conservation equation. After describing the pressure–velocity decoupling problem associated with the so‐called colocated grid methods, a modified approach is presented that overcomes this problem using a different discretization scheme for the second derivative of pressure. The modified scheme is employed for solving a number of benchmark problems including both single‐phase and two‐phase test cases. Copyright © 2010 John Wiley & Sons, Ltd.     

An augmented Lagrangian approach to simulating yield stress fluid flows around a spherical gas bubble

We simulated the flow of a yield stress fluid around a gas bubble using an augmented Lagrange approach. The piecewise linear equal‐order finite elements for both the velocity and the pressure approximations proposed and analyzed by Latché and Vola in 2004 were applied. A mesh adaptive strategy based on this element‐pair choice was also proposed to render the yield surfaces of desired resolution. The corresponding numerical scheme was formulated for general Herschel–Bulkley fluids. Numerical results on Bingham fluid flows around a slowly rising spherical gas bubble were provided to validate the proposed algorithm. Copyright © 2011 John Wiley & Sons, Ltd.