Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

Controllable design of Zn-Ni-P on g-C3N4 for efficient photocatalytic hydrogen production

Synthesizing a stable and efficient photocatalyst has been the most important research goal up to now. Owing to the dominant performance of g-C₃N₄ (graphitized carbonitride), an ordered assemble of a composite photocatalyst, Zn-Ni-P@g-C₃N₄, was successfully designed and controllably prepared for highly efficient photocatalytic H₂ evolution. The electron transport routes were successfully adjusted and the H₂ evolution was greatly improved. The maximum amount of H₂ evolved reached about 531.2 μmol for 5 h over Zn-Ni-P@g-C₃N₄ photocatalyst with a molar ratio of Zn to Ni of 1:3 under illumination of 5 W LED white light (wavelength 420 nm). The H₂ evolution rate was 54.7 times higher than that over pure g-C₃N₄. Moreover, no obvious reduction in the photocatalytic activity was observed even after 4 cycles of H₂ production for 5 h. This synergistically increased effect was confirmed through the results of characterizations such as XRD, TEM, SEM, XPS, N₂ adsorption, UV-vis DRS, transient photocurrent, FT-IR, transient fluorescence, and Mott-Schottky studies. These studies showed that the Zn-Ni-P nanoparticles modified on g-C₃N₄ provide more active sites and improve the efficiency of photogenerated charge separation. In addition, the possible mechanism of photocatalytic H₂ production is proposed.     

Synthesis of Silver Nanoparticles-Modified Graphitic Carbon Nitride Nanosheets for Highly Efficient Photocatalytic Hydrogen Peroxide Evolution

As a promising metal-free photocatalyst, graphitic carbon nitride (g-C₃N₄) is still limited by insufficient visible light absorption and rapid recombination of photogenerated carriers, resulting in low photocatalytic activity. Here, we adjusted the microstructure of the pristine bulk-g-C₃N₄ (PCN) and further loaded silver (Ag) nanoparticles. Abundant Ag nanoparticles were grown on the thin-layer g-C₃N₄ nanosheets (CNNS), and the Ag nanoparticles decorated g-C₃N₄ nanosheets (Ag@CNNS) were successfully synthesized. The thin-layer nanosheet-like structure was not only beneficial for the loading of Ag nanoparticles but also for the adsorption and activation of reactants via exposing more active sites. Moreover, the surface plasmon resonance (SPR) effect induced by Ag nanoparticles enhanced the absorption of visible light by narrowing the band gap of the substrate. Meanwhile, the composite band structure effectively promoted the separation and transfer of carriers. Benefiting from these merits, the Ag@CNNS reached a superior hydrogen peroxide (H₂O₂) yield of 120.53 μmol/g/h under visible light irradiation in pure water (about 8.0 times higher than that of PCN), significantly surpassing most previous reports. The design method of manipulating the microstructure of the catalyst combined with the modification of metal nanoparticles provides a new idea for the rational development and application of efficient photocatalysts.     

Surface molecular imprinting on g-C3N4 photooxidative nanozyme for improved colorimetric biosensing

Graphitic carbon nitride (g-C₃N₄), as a visible-light-active organic semiconductor, has attracted growing attentions in photocatalysis and photoluminescence-based biosensing. Here, we demonstrated the intrinsic photooxidase activity of g-C₃N₄ and then surface molecular imprinting on g-C₃N₄ nanozymes was achieved for improved biosensing. Upon blue LED irradiation, the g-C₃N₄ exhibited superior enzymatic activity for oxidation of chromogenic substrate like 3,3′,5,5′-tetramethylbenzidine (TMB) without destructive H₂O₂. The oxidation was mainly ascribed to O₂⁻ that was generated during light irradiation. The surface molecular imprinting on g-C₃N₄ can lead to an over 1000-fold alleviation in matrix-interference from serum samples, 4-fold improved enzymatic activity as well as enhanced substrate specificity comparing with bare g-C₃N₄ during colorimetric sensing. Also, the MIP-g-C₃N₄ possesses a high affinity to TMB with a K_m value of only 22 μmol/L, much lower than other comment nanozymes like AuNPs, Fe₃O₄ NPs, etc. It was successfully applied for detection of cysteine in serum sample with satisfactory recoveries.     

Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Enhanced photocatalytic H2 production over dual-cocatalyst-modified g-C3N4 heterojunctions

Ag nanoparticles (NPs) were deposited on the surface of g-C₃N₄ (CN) by an in situ calcination method. NiS was successfully loaded onto the composites by a hydrothermal method. The results showed that the 10 wt%-NiS/1.0 wt%-Ag/CN composite exhibits excellent photocatalytic H₂ generation performance under solar-light irradiation. An H₂ production rate of 9.728 mmol·g^?1·h^?1 was achieved, which is 10.82-, 3.45-, and 2.77-times higher than those of pure g-C₃N₄, 10 wt%-NiS/CN, and 1.0 wt%-Ag/CN composites, respectively. This enhanced photocatalytic H₂ generation can be ascribed to the co-decoration of Ag and NiS on the surface of g-C₃N₄, which efficiently improves light harvesting capacity, photogenerated charge carrier separation, and photocatalytic H₂ production kinetics. Thus, this study demonstrates an effective strategy for constructing excellent g-C₃N₄-related composite photocatalysts for H₂ production by using different co-catalysts.     

Novel PtPd alloy nanoparticle-decorated g-C3N4 nanosheets with enhanced photocatalytic activity for H2 evolution under visible light irradiation

PtPd bimetallic alloy nanoparticle (NP)-modified graphitic carbon nitride (g-C₃N₄) nanosheet photocatalysts were synthesized via chemical deposition precipitation. Characterization of the photocatalytic H₂ evolution of the g-C₃N₄ nanosheets shows that it was significantly enhanced when PtPd alloy NPs were introduced as a co-catalyst. The 0.2 wt% PtPd/g-C₃N₄ composite photocatalyst gave a maximum H₂ production rate of 1600.8 μmol g^–1 h^–1. Furthermore, when K₂HPO₄ was added to the reaction system, the H₂ production rate increased to 2885.0 μmol g^–1 h^–1. The PtPd/g-C₃N₄ photocatalyst showed satisfactory photocatalytic stability and was able to maintain most of its photocatalytic activity after four experimental photocatalytic cycles. In addition, a possible mechanism for the enhanced photocatalytic activity was proposed and verified by various photoelectric techniques. These results demonstrate that the synergistic effect between PtPd and g-C₃N₄ helps to greatly improve the photocatalytic activity of the composite photocatalyst.     

Gold/monolayer graphitic carbon nitride plasmonic photocatalyst for ultrafast electron transfer in solar-to-hydrogen energy conversion

Gold (Au) plasmonic nanoparticles were grown evenly on monolayer graphitic carbon nitride (g-C₃N₄) nanosheets via a facile oil-bath method. The photocatalytic activity of the Au/monolayer g-C₃N₄ composites under visible light was evaluated by photocatalytic hydrogen evolution and environmental treatment. All of the Au/monolayer g-C₃N₄ composites showed better photocatalytic performance than that of monolayer g-C₃N₄ and the 1% Au/monolayer g-C₃N₄ composite displayed the highest photocatalytic hydrogen evolution rate of the samples. The remarkable photocatalytic activity was attributed largely to the successful introduction of Au plasmonic nanoparticles, which led to the surface plasmon resonance (SPR) effect. The SPR effect enhanced the efficiency of light harvesting and induced an efficient hot electron transfer process. The hot electrons were injected from the Au plasmonic nanoparticles into the conduction band of monolayer g-C₃N₄. Thus, the Au/monolayer g-C₃N₄ composites possessed higher migration and separation efficiencies and lower recombination probability of photogenerated electron-hole pairs than those of monolayer g-C₃N₄. A photocatalytic mechanism for the composites was also proposed.     

Promoting Piezocatalytic H2O2 Production in Pure Water by Loading Metal-Organic Cage-Modified Gold Nanoparticles on Graphitic Carbon Nitride

Piezocatalytic hydrogen peroxide (H₂O₂) production is a green synthesis method, but the rapid complexation of charge carriers in piezocatalysts and the difficulty of adsorbing substrates limit its performance. Here, metal-organic cage-coated gold nanoparticles are anchored on graphitic carbon nitride (MOC-AuNP/g-C₃N₄) via hydrogen bond to serve as the multifunctional sites for efficient H₂O₂ production. Experiments and theoretical calculations prove that MOC-AuNP/g-C₃N₄ simultaneously optimize three key parts of piezocatalytic H₂O₂ production: i) the MOC component enhances substrate (O₂) and product (H₂O₂) adsorption via host–guest interaction and hinders the rapid decomposition of H₂O₂ on MOC-AuNP/g-C₃N₄, ii) the AuNP component affords a strong interfacial electric field that significantly promotes the migration of electrons from g-C₃N₄ for O₂ reduction reaction (ORR), iii) holes are used for H₂O oxidation reaction (WOR) to produce O₂ and H⁺ to further promote ORR. Thus, MOC-AuNP/g-C₃N₄ can be used as an efficient piezocatalyst to generate H₂O₂ at rates up to 120.21 μmol g⁻¹ h⁻¹ in air and pure water without using sacrificial agents. This work proposes a new strategy for efficient piezocatalytic H₂O₂ synthesis by constructing multiple active sites in semiconductor catalysts via hydrogen bonding, by enhancing substrate adsorption, rapid separation of electron-hole pairs and preventing rapid decomposition of H₂O₂.     

In-situ polymerization for PPy/g-C3N4 composites with enhanced visible light photocatalytic performance

Polypyrrole-modified graphitic carbon nitride composites (PPy/g-C₃N₄) are fabricated using an in-situ polymerization method to improve the visible light photocatalytic activity of g-C₃N₄. The PPy/g-C₃N₄ is applied to the photocatalytic degradation of methylene blue (MB) under visible light irradiation. Various characterization techniques are employed to investigate the relationship between the structural properties and photoactivities of the as-prepared composites. Results show that the specific surface area of the PPy/g-C₃N₄ composites increases upon assembly of the amorphous PPy nanoparticles on the g-C₃N₄ surface. Owing to the strong conductivity, the PPy can be used as a transition channel for electrons to move onto the g-C₃N₄ surface, thus inhibiting the recombination of photogenerated carriers of g-C₃N₄ and improving the photocatalytic performance. The elevated light adsorption of PPy/g-C₃N₄ composites is attributed to the strong absorption coefficient of PPy. The composite containing 0.75 wt% PPy exhibits a photocatalytic efficiency that is 3 times higher than that of g-C₃N₄ in 2 h. Moreover, the degradation kinetics follow a pseudo-first-order model. A detailed photocatalytic mechanism is proposed with ·OH and ·O₂^? radicals as the main reactive species. The present work provides new insights into the mechanistic understanding of PPy in PPy/g-C₃N₄ composites for environmental applications.     

Integrating non-precious-metal cocatalyst Ni3N with g-C3N4 for enhanced photocatalytic H2 production in water under visible-light irradiation

Photocatalytic H₂ production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years. In this study, noble-metal-free Ni₃N was used as an active cocatalyst to enhance the activity of g-C₃N₄ for photocatalytic H₂ production under visible-light irradiation (λ > 420 nm). The characterization results indicated that Ni₃N nanoparticles were successfully loaded onto the g-C₃N₄, which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H₂ evolution under visible-light irradiation. The hydrogen evolution rate reached ～305.4 μmol h^?1 g^?1, which is about three times higher than that of pristine g-C₃N₄, and the apparent quantum yield (AQY) was ～0.45% at λ = 420. Furthermore, the Ni₃N/g-C₃N₄ photocatalyst showed no obvious decrease in the hydrogen production rate, even after five cycles under visible-light irradiation. Finally, a possible photocatalytic hydrogen evolution mechanism for the Ni₃N/g-C₃N₄ system is proposed.     

Exploring recent advances in silver halides and graphitic carbon nitride-based photocatalyst for energy and environmental applications

Engineering visible light active photocatalytic systems for renewable energy production and environmental remediation has always been a promising technology to counter overall energy demands and pollution challenges. As a fascinating conjugated polymer graphitic carbon nitride (g-C₃N₄) has been developed as a hotspot in the research field as a metal-free semiconducting material with the appealing band gap of 2.7 eV. Recently, g-C₃N₄ has gained tremendous interest in photocatalytic wastewater abatement as well as for hydrogen (H₂) generation, carbon dioxide (CO₂) reduction, and pollutant degradation, under exposure to visible light. Plasmonic silver halides (AgX) such as AgCl, AgBr, and AgI as plasmonic photocatalyst have received immense research interest owing to their escalating photocatalytic efficacy and strong surface plasmon resonance effect (SPR). AgX is the photosensitive, broad bandgap semiconducting materials with effectual antimicrobial properties. This review summarizes the heterostructure of carbonaceous g-C₃N₄ with plasmonic AgX, to reduce the recombination of photo-generated charge carriers, thus enhancing the natural light absorption. g-C₃N₄ grafted AgX nanoarchitectures can be utilized for several potential applications, for instance, overall water splitting (OWS), CO₂ conversion to hydrocarbon fuels, pollutant exclusion, and antibacterial disinfection. This review focuses on the evolution of g-C₃N₄ as well as AgX, facile, and synthetic routes for fabrication of g-C₃N₄ tailored AgX, construction of nano-junctions (AgX/g-C₃N₄) with various photocatalytic applications. Finally, we provided a viewpoint of current hassles and some perceptions of novel trends in this exciting as well as developing research arena.     

分级孔结构g-C3N4光催化剂的制备及性能

以单分散SiO2为模板,通过简单的一步煅烧法制备具有分级孔结构的g-C3N4。与体相g-C3N4相比,分级孔结构的g-C3N4不仅可见光吸收性能和比表面积得到提高,而且更有利于光生电子-空穴的分离。此外,具有分级孔结构的g-C3N4具有明显增强的可见光驱动的光催化产氢活性,当SiO2和二氰二胺质量比为1∶1时,制备所得g-C3N4(C3N4-2)产氢速率几乎是体相g-C3N4的18倍。     

Engineering FeS2 nanoparticles on tubular g-C3N4 for photo-Fenton treatment of paint wastewater

An efficient photo-Fenton catalyst （Fe S₂@HTCN） was designed by maximizing the synergistic effect of Fe S₂nanoparticles and hollow tubular g-C₃N₄（HTCN）.Molecule self-assembly and molten salts-assisted calcination were used to engineering the hollow structured g-C₃N₄before anchoring Fe S₂nanoparticles on the walls of HTCN via reflux method.Compared to bulk g-C₃N₄,the unique structure of HTCN and het...     

石墨相氮化碳/二氧化锡复合材料的制备及光催化性能

采用热聚合法和水热法相结合的方法制备了g-C_3N_4/SnO_2复合光催化剂。利用XRD、SEM、TEM、FT-IR和UV-Vis DRS等多种测试手段对所得样品的物相结构、微观形貌和吸光特性等进行了表征。结果表明,异质结构复合光催化剂的最大光吸收边位置相对纯相SnO_2发生了明显的红移,并且SnO_2颗粒均匀分布于g-C_3N_4表面,其中最优组分(50%-g-C_3N_4/SnO_2)光催化降解染料罗丹明B(RhB)的效率达到了纯相g-C_3N_4的3.78倍。     

A novel P-doped and NCDs loaded g-C3N4 with enhanced charges separation for photocatalytic hydrogen evolution

Graphite carbon nitride(g-C₃N₄) is a promising non-metal photocatalyst for photocatalytic hydrogen production, but its performance is still limited due to sluggish charges separation and low utilization of light.In this work, P-doped and N-doped carbon dots(NCDs) supported g-C₃N₄were successfully prepared via hydrothermal and polymerization reactions. The sub-bandgap formed by P-doping enhances the utilization of visible light, and the high electron de...     

Bi2WO6/g-C3N4复合型催化剂的制备及其可见光光催化性能

利用溶剂热法, 把Bi₂WO₆纳米颗粒植入g-C₃N₄层间和表面成功地制备了Bi₂WO₆/g-C₃N₄复合型光催化剂。通过XRD、SEM、TEM、BET和UV-Vis分别对样品的结构、组成、形貌、比表面积、光学性能进行了表征。结果表明, g-C₃N₄层状结构被部分剥离成碎片且与Bi₂WO₆纳米颗粒形成了复合物。Bi₂WO₆/g-C₃N₄复合型光催化剂与单一Bi₂WO₆相比不仅扩展了可见光的响应范围、增大了比表面还加速了光生电子与空穴的分离。结果表明, Bi₂WO₆的最佳负载量为60wt%时, 复合型光催化剂具有最高的可见光催化活性且性能稳定、易回收。     

Bi2WO6/g-C3N4复合型催化剂的制备及其可见光光催化性能

利用溶剂热法,把Bi2WO6纳米颗粒植入g-C3N4层间和表面成功地制备了Bi2WO6/g-C3N4复合型光催化剂。通过XRD、SEM、TEM、BET和UV-Vis分别对样品的结构、组成、形貌、比表面积、光学性能进行了表征。结果表明,g-C3N4层状结构被部分剥离成碎片且与Bi2WO6纳米颗粒形成了复合物。Bi2WO6/g-C3N4复合型光催化剂与单一Bi2WO6相比不仅扩展了可见光的响应范围、增大了比表面还加速了光生电子与空穴的分离。结果表明,Bi2WO6的最佳负载量为60wt%时,复合型光催化剂具有最高的可见光催化活性且性能稳定、易回收。     

Hydrocarbon production by addition of Cu-ZnO on g-C3N4 for CO2 conversion

In this study, copper/zinc oxide/graphite nitrogen carbide (Cu/ZnO/g-C₃N₄) is prepared using a hydrothermal method and applied as a photocatalyst for CO₂ photoreduction. The morphology and structural properties of the obtained Cu/ZnO/g-C₃N₄ are systematically characterized through X-ray powder diffraction, ultraviolet–visible absorption spectroscopy, transmission electronic microscopy, and photoluminescence spectroscopy. A 3 wt% Cu/ZnO/g-C₃N₄ photocatalyst exhibits high CH₄ (40.7 μmol g⁻¹ hr⁻¹), CO (65.1 μmol g⁻¹ hr⁻¹), and CH₃OH (92.5 μmol g⁻¹ hr⁻¹) production rates, which are 38.3, 77.1, and 58.1 fold higher than the pure g-C₃N₄. The production rate is higher than those for bulk g-C₃N₄ and ZnO/g-C₃N₄. Finally, the reaction mechanism of Cu/ZnO/C₃N₄ is proposed in this study.     

Semi-chemical interaction between graphitic carbon nitride and Pt for boosting photocatalytic hydrogen evolution

Owing to the exorbitant overpotential and serious carrier recombination of graphitic carbon nitride （gC₃N₄）,noble metal （NM） is usually served as the H₂evolution co-catalyst.Although the NM （such as Pt）nanoparticles can reduce the H₂evolution overpotential,the weak van der Waals interaction between Pt and g-C₃N₄makes against the charge transfer.Herein,the solvothermal method is developed to achieve semi-chemical interaction betwee...