Preparation of colloidal stable fluoroalkyl end‐capped oligomer/silver nanocomposites––application to the surface modification of traditional organic polymers with these nanocomposites

A variety of fluoroalkyl end‐capped oligomers/silver nanocomposites were prepared by the reactions of silver ions with poly(methylhydrosiloxane) in the presence of fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide cooligomer containing poly(dimethylsiloxane) segments in organic media such as toluene and 1,2‐ dichloroethane. These fluorinated oligomers/silver nanocomposites thus obtained were found to exhibit clear plasmon absorption bands around 420 nm related to the formation of silver nanoparticles. In particular, these composites could display narrow plasmon absorptions around 420 nm in toluene by the addition of trioctylamine (TOA). On the other hand, the corresponding non‐fluorinated N‐(1,1‐ dimethyl‐3‐oxobutyl)acrylamide oligomer was not able to afford such a plasmon absorption under similar conditions. These fluorinated oligomers/silver nanocomposites in organic media have been found to be stable for more than 10 days. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements showed that silver nanoparticles could be effectively encapsulated into fluorinated oligomeric aggregate cores to afford colloidal stable fluorinated oligomers/silver nanocomposites. Fluorinated oligomers/silver nanocomposites were also applied to the surface modification of traditional organic polymers such as polystyrene (PSt) and poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a higher surface antibacterial activity related to the silver nanoparticles on their surface. Copyright © 2007 John Wiley & Sons, Ltd.     

Green synthesis of polymer nanofibers and their composites as flame‐retardant materials for polymer nanocomposites

Polyaniline nanofibers and their composites with carbon nanotubes were developed as an effective flame‐retardant material using a facile green method. Polyaniline nanofibers were used as a smart flame‐retardant for acrylonitrile–butadiene–styrene polymer. The polyaniline nanofibers were dispersed in polymer matrix forming well‐dispersed polymer nanocomposites. Effect of polyaniline nanofiber mass ratio on the polymer nanocomposite properties was studied. Polyaniline nanofiber composites with carbon nanotubes were also dispersed in polymer matrix. The thermal stability and flammability properties of the polymer nanocomposites were investigated. The rate of burning of polymer nanocomposites achieved 82.5% reduction (7.32 mm/min) compared with virgin polymer (42.5 mm/min). The reduction in peak heat release rate and total heat release of the polymer nanocomposites containing nanofibers achieved 74 and 34%, respectively. Interestingly, the average mass loss rate was significantly reduced by 58% and the emission of carbon monoxide and carbon dioxide gases were suppressed by 20 and 47%, respectively. The effect of polyaniline nanofibers composites on the flammability of polymer nanocomposites was also studied. Polyaniline nanofibers and their composites were characterized using Fourier transform infrared spectroscopy and transmission and scanning electron microscopy. The dispersion of polyaniline nanofibers in polymer nanocomposites was characterized using transmission electron microscopy. The different polymer nanocomposites were characterized using thermogravimetric analysis, UL94 flame chamber, and cone calorimeter tests. Copyright © 2016 John Wiley & Sons, Ltd.     

Electroconductive Green Metal-polyaniline Nanocomposites: Synthesis and Application in Sensors

Polyaniline (PANI) is one of the most extensively used conducting polymer due to its fascinating properties including conducting, thermal, optical, magnetic and electrochemical properties, simple synthesis procedure and low cost of monomer. It has attracted major attention in a variety of applications including electrochemical sensors, catalysts, supercapacitors and biosensors. However, its limitations such as insolubility in common solvents, low process-ability and poor mechanical properties have led to the development of new approaches to improve it properties. Metal nanoparticles (MNPs) such as silver, gold, copper and palladium have been combined with PANI to improve on its properties which has led to a new class of materials known as metal/PANI nanocomposites. These hybrid nanocomposites incorporate advantages of both MNPs and polymers which effectively improves the properties of the individual materials. Various synthesis techniques including in situ polymerization, ɤ-radiolysis, electrodeposition, complexation, vacuum deposition and interfacial polymerization have been used in the formation of metal/PANI nanocomposites. These nanocomposites have been used in various sensor and biosensor applications due to their excellent conductivity, ease of synthesis, excellent redox potentials, chemical and thermal stability. This review highlights the various metal/PANI nanocomposites, their various synthesis techniques and their application in sensors and biosensors. The importance of these nanocomposites in sensing and signaling various toxic heavy metals such as mercury, lead and silver and toxic gases such as hydrogen sulphide, ammonia and chloroform has been discussed. In addition the review covers the applications of metal/PANI nanocomposites in biosensor systems for the detection of glucose, DNA, protein, cholesterol, drugs and hydrogen peroxide.     

Facile synthesis of fluorescent quantum dot‐polymer nanocomposites via frontal polymerization

We report an available approach for quickly fabricating CdS QD‐polymer nanocomposites via frontal polymerization (FP). First, we synthesized (3‐mercaptopropyl)‐1‐trimethoxysilane (MPS)‐capped CdS quantum dots (QDs). With these MPS‐capped CdS QDs containing mercapto groups, MPS‐capped CdS QDs can be easily incorporated into a poly(N‐methylolacrylamide) (PNMA) matrix via FP. A variety of features for preparing QD‐polymer nanocomposites, such as initiator concentration and CdS concentration, were thoroughly investigated. The fluorescence properties of QD‐polymer nanocomposites prepared via FP are comparatively investigated on the basis of ultraviolet–visible (UV–vis) spectra and photoluminescence (PL) spectra. Results show that the PL intensity of QD‐polymer nanocomposites prepared via the FP method is superior to that obtained by the traditional batch polymerization (BP) method. In addition, by measuring the changes of PL intensity of the samples immersed in different concentrations of copper acetate solution, we found the QD‐polymer nanocomposites can be ultrasensitive to copper ions. This FP process can be exploited as a facile and rapid way for synthesis QD‐polymer nanocomposites on a large scale, avoiding the fluorescence quenching of nanocrystals during incorporation nanocrystals into polymer matrices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2170–2177, 2010     

Preparation and characterization of polyacrylamide–silver nanocomposites

Polyacrylamide–silver nanocomposites are successfully prepared by irradiating the aqueous solution of AgNO₃ and acrylamide monomer with ⁶⁰Co γ-ray. The composites are found to contain nanometer silver particles with a narrow size distribution and a homogeneous dispersion. The existing of isopropanol (as a hydroxyl radical scavenger and chain transfer agent) in system affects the properties of both the dispersed phase and matrix of the nanocomposites. The fast-formed polymer chains probably play a key role in preventing the aggregation of silver particles which are reduced later.     

In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry

A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N₃) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using ¹H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N₃ loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N₃ in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments.     

超声引发无皂乳液聚合制备纳米银/PAAEM复合材料及其表征

在不使用气体保护及乳化剂的条件下,超声辐射引发无皂乳液聚合双原位合成纳米银/聚乙酰乙酸基甲基丙烯酸乙酯(PAAEM)复合材料。并通过XRD、FTIR、TEM、HRTEM、XPS和TG等分析方法对其进行表征。结果表明:纳米银粒子具有面心立方结构和球形或近球形形貌,且较均匀地分散在聚合物基体中;纳米银粒子与基体之间的相互作用是纳米银与基体中乙酰乙酸基的羰基氧原子配位所产生的;而且纳米银粒子对基体PAAEM的热学性能有很大影响。     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Synthesis of core‐shell silver–polyaniline nanocomposites by gamma radiolysis method

Core‐shell silver (Ag)–polyaniline (PAni) nanocomposites have been synthesized by the in‐situ gamma radiation‐induced chemical polymerization method. Aqueous solution of aniline, a free‐radical oxidant, and/or silver metal salt were irradiated by γ‐rays. Reduction of the silver salt in aqueous aniline leads to the formation of silver nanoparticles which in turn catalyze oxidation of aniline to polyaniline. The resultant Ag‐PAni nanocomposites were characterized by using different spectroscopy analyses like X‐ray photoelectron, UV–visible, and infrared spectroscopy. The optical absorption bands revealed that the bands at about 400 nm are due to the presence of nanosilver and the blue‐shifted peak at ～ 555 nm is due to the presence of metallic silver within the PAni matrix. X‐ray diffraction pattern clearly indicates the broad amorphous polymer and the sharp metal peaks. Scanning electron microscopy and transmission electron microscopy of the nanocomposite showed a uniform size distribution with spherical and granular morphology. Thermogravimetric analysis revealed that the composites have a higher degradation temperature than polyaniline alone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5741–5747, 2007     

The effects of intralayer metal composition of layered double hydroxides on glass transition, dispersion, thermal and fire properties of their PMMA nanocomposites

A series of aluminum-containing layered double hydroxides (LDHs), containing Mg, Ca, Co, Ni, Cu and Zn as the divalent metals, have been prepared by the co-precipitation method and used to prepare nanocomposites of PMMA by in situ bulk polymerization. The additives were characterized by Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy (XRD) and thermogravimetric analysis while the polymer composites were characterized by XRD, transmission electron microscopy, differential scanning calorimetry and cone calorimetry. Polymerization of methyl methacrylate in the presence of these undecenoate LDHs results in composites with enhanced thermal stability. The glass transition temperatures of the composites and the pristine polymers are found to be around 110 °C; this suggests that the presence of these additives has little effect on the polymer. It is found that the additive composition and the dispersion state of LDHs agglomerates in the polymer matrix influence the fire properties of composites as measured by cone calorimetry.     

Preparation and Characterization of Copper Nanowire/Polyamide 6 Nanocomposites and Its Properties

Copper nanowire/polyamide 6 (denoted as nano-Cu/PA6) nanocomposites were readily prepared via in situ polymerization in reducing atmosphere. The microstructure, phase composition, and chemical state of typical elements of as-prepared nano-Cu/PA6 nanocomposites were analyzed by transmission electron microscopy, and X-ray diffraction, while their thermal stability and crystallization behaviors were evaluated by thermogravimetric analysis and differential scanning calorimetry. Moreover, the mechanical strength of as-prepared nano-Cu/PA6 nanocomposites was determined with a universal testing machine, and their friction and wear behaviors were evaluated with an MRH-3 high speed block-on-ring test rig. Findings indicate that copper nanowire is coated by surrounding molecular chains of PA6 and well disperses in the polymeric matrix. Besides, copper nanowire consists of metallic copper, which indicates that copper nanowire coated by PA6 matrix has good chemical stability and is not oxidized during the preparation of the title nanocomposites under high-temperature reactions. Furthermore, copper nanowire filler is able to remarkably improve the mechanical strength and wear resistance of polyamide 6. Particularly, nano-Cu/PA6 composite containing 0.5% (mass fraction) copper nanowire possesses the maximum tensile strength (its tensile strength is higher than that of pure PA6 by 77.41%); and its friction coefficient and wear scar diameter are also much smaller than those of PA6.     

Functional polymer nanocomposites containing triazole and carboxyl groups

New water-soluble functional polymer nanocomposites with nanoparticles of metallic silver in a matrix of 1-vinyl-1,2,4-triazole copolymers with crotonic acid have been synthesized. The resulting nanocomposites contain isolated silver nanoparticles 2–12 nm in diameter, preferably spherical in shape, and uniformly distributed in the polymer matrix. ATR IR spectroscopy has revealed that the nanoparticles affect the state of the carboxyl groups in the polymer matrix. It has been found that the size of zero-valent silver nanoparticles depends on the ratio of monomer units in the polymer matrix. The thermo-oxidative stabilities of the synthesized copolymers and polymer nanocomposites produced on their basis have been examined.     

Preparation and Optical Properties of New Metal/Macromolecule Architectures

Polymer nanocomposite films with unusual and anisotropic optical properties were obtained by the controlled in-situ generation of noble metal nanoparticles (NPs). Poly(vinyl alcohol) (PVA) and poly(ethylene-co-vinylalcohol) (EVAl) nanocomposites containing gold and silver NPs were efficiently produced by a photo-reduction or thermal process both operating directly in the solid state and resulted efficiently stabilized by the presence of polymer hydroxyl groups, which prevent particles agglomeration. Uniaxial drawing of the NPs/polymer composites promoted anisotropic packing of the embedded particles along the stretching direction of the film, resulting in a shift of the surface plasmon resonance well above 40 nm and thus producing a well-defined polarization-dependent colour change. Such nanostructured materials when are obtained in the form of thin films can be applied to several fields, from sensor to photonics (i.e., macromolecular strain sensor, linear absorbing polarizer).     

Elastomer Nanocomposite; Properties

Polymer nanocomposites represent a class of materials that have assumed great importance in recent years and are the focus of extensive research. Unlike plastomer nanocomposites, the elastomer nanocomposites are in the stage of infancy in respect to their applications.

In general, in polymer composites, the matrix and the filler are bonded to each other by weak intermolecular forces and covalent bonding are rarely involved. If the filler could be dispersed in the polymer matrix at the nanometre level and is able to interact with the matrix by chemical bonding, nanocomposites with significant properties improvement are obtained. These improvements can include mechanical properties (module, strength, etc.), thermal resistance, decrease in gas permeability (barrier), flammability, etc.

This paper is a review of the property improvements of different elastomers using nanofillers like silicates, carbon black, metallic powders, cellulose crystals, mixture of nanofillers, etc, with the intention of obtaining elastomer nanocomposites.     

银/聚合物纳米复合材料

银/聚合物纳米复合材料是一种典型的聚合物基复合材料, 其结构和性能依赖于合成方法,因此开发材料的优异性能必须以深入研究纳米材料的先进合成技术为前提。本文综述了纳米银粒子及其与聚合物形成的纳米复合材料的最新合成进展, 重点介绍了基于液相化学还原方法合成纳米银粒子的新方法, 如溶胶-凝胶法、沉淀法、微乳液法和离子液体法, 以及纳米银粒子的分散技术和原位法合成银/聚合物纳米复合材料的新技术, 并介绍了纳米银复合材料的电绝缘性、表面增强拉曼散射性能、抗菌性及其在生物医学等领域中的应用。     

Tensile,thermal, and antibacterial characterization of composites of cellulose/modified Pennisetum purpureum natural fibers with in situ generated copper nanoparticles

Eco-friendly all cellulose composites were developed using cellulose as matrix and nanocomposite (in situ generated copper nanoparticles modified Napier Grass Fibers (NGFs)) as fillers for the antibacterial applications. The content of the nanocomposite filler was increased from 1?wt.% to 5?wt.% in the cellulose matrix. All these composites were characterized by Scanning Electron Microscopy (SEM), Tensile, Thermo Gravimetric Analysis (TGA), and antibacterial tests. SEM-EDX analysis revealed the in situ generation of copper nanoparticles on the surface of the films. Further, all cellulose composites showed good thermal stability. A minimum of 30% increase in char residue was observed in all cellulose nanocomposites compared to matrix. Antibacterial analysis indicated an excellent clear zone formation against both Gram Negative (Escherichia coli) and Gram Positive (Staphylococcus) bacteria. Hence, all these cellulose nanocomposite films can be considered as antibacterial packaging and dressing materials in medical field.     

Palladium deposition features on poly-<Emphasis Type="Italic">o</Emphasis>-phenylenediamine film

Palladium electrodeposition on poly-o-phenylenediamine (PPD) redox polymer was studied. Palladium electrodeposition was shown to be initiated at the ITO/polymer interface with further proliferation into the polymeric matrix and passing by mediator mechanism. PPD exposure to PdCl₂ solution was shown to result in the accumulation of palladium ions in the polymer matrix with partial substitution of counter ions linked to nitrogen atom. Upon rinsing, the film retains some palladium ions, which can be reduced to metal. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1035–1039. The text was submitted by the authors in English.     

Novel nanocomposites based on silver nanoparticles and mixed epoxyamine networks

A procedure has been proposed for the direct synthesis (without the use of reductants) of silver nanoparticles in an epoxy polymer matrix with the formation of novel nanocomposites. The average size of the formed nanoparticles has been shown to be about 18 nm. The polymer cross linking leads to the formation of chain aggregates of the nanoparticles. Nanocomposites containing isolated (individual) silver nanoparticles can also be obtained.     

Metal oxide-modified carbon paste electrodes and microelectrodes for the detection of amino acids and their application to capillary electrophoresis

Using cyclic voltammetry and constant-potential amperometry, copper, nickel, cobalt, lead, silver, manganese, bismuth and palladium oxides in a carbon paste matrix have been investigated as redox mediators for the electro-oxidation of amino acids in the 0.05 mol/L NaOH medium. CuO and NiO have been found to be the most effective electrocatalysts. The 150 μm I.D. microelectrode with 25% CuO was applied to the amino acids detection in capillary electrophoresis.     

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross‐linking filler

We report the synthesis and characterization of novel elastomeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) as both the cross‐linker and filler within a polydimethylsiloxane (PDMS) polymer matrix. These polymer composites were prepared through the reaction of octasilane‐POSS (OS‐POSS) with vinyl‐terminated PDMS chains using hydrosilylation chemistry. In addition, larger super‐POSS cross‐linkers, consisting of two pendant hepta(isobutyl)POSS molecules attached to a central octasilane‐POSS core, were also used in the fabrication of the PDMS composites. The chemical incorporation of these POSS cross‐linkers into the PDMS network was verified by solid‐state ¹H magic angle spinning NMR. Based on dynamic mechanical analysis, the PDMS nanocomposites prepared with the octafunctional OS‐POSS cross‐linker exhibited enhanced mechanical properties relative to polymer systems prepared with the tetrafunctional TDSS cross‐linker at equivalent loading levels. The observed improvements in mechanical properties can be attributed to the increased dimensionality of the POSS cross‐linker. The PDMS elastomers synthesized from the larger super‐POSS molecule showed improved mechanical properties relative to both the TDSS and OS‐POSS composites due to the increased volume‐fraction of POSS filler in the polymer matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2589–2596, 2009