Anchored Pd complex in MCM-41 and MCM-48: novel heterogeneous catalysts for hydrocarboxylation of aryl olefins and alcohols

We report here, for the first time, synthesis of anchored Pd complexes in mesoporous supports such as MCM-41 and MCM-48 as true heterogeneous catalysts for hydrocarboxylation of aryl olefins and alcohols to give excellent conversion ( approximately 100%) and regioselectivity ( approximately 99%) for 2-arylpropionic acids. The catalysts were characterized by powder-XRD, 31P CP-MAS NMR, FT-IR, TEM, XPS and ICP-AES. Recycle studies with these anchored Pd mesoporous catalysts were performed to confirm true heterogeneity.     

Bringing Homogeneous Iron Catalysts on the Heterogeneous Side: Solutions for Immobilization

Noble metal catalysts currently dominate the landscape of chemical synthesis, but cheaper and less toxic derivatives are recently emerging as more sustainable solutions. Iron is among the possible alternative metals due to its biocompatibility and exceptional versatility. Nowadays, iron catalysts work essentially in homogeneous conditions, while heterogeneous catalysts would be better performing and more desirable systems for a broad industrial application. In this review, approaches for heterogenization of iron catalysts reported in the literature within the last two decades are summarized, and utility and critical points are discussed. The immobilization on silica of bis(arylimine)pyridyl iron complexes, good catalysts in the polymerization of olefins, is the first useful heterogeneous strategy described. Microporous molecular sieves also proved to be good iron catalyst carriers, able to provide confined geometries where olefin polymerization can occur. Same immobilizing supports (e.g., MCM-41 and MCM-48) are suitable for anchoring iron-based catalysts for styrene, cyclohexene and cyclohexane oxidation. Another excellent example is the anchoring to a Merrifield resin of an Fe^II-anthranilic acid complex, active in the catalytic reaction of urea with alcohols and amines for the synthesis of carbamates and N-substituted ureas, respectively. A SILP (Supported Ionic Liquid Phase) catalytic system has been successfully employed for the heterogenization of a chemoselective iron catalyst active in aldehyde hydrogenation. Finally, Fe^III ions supported on polyvinylpyridine grafted chitosan made a useful heterogeneous catalytic system for C–H bond activation.     

Carbonylation of styrenes catalyzed by bioxazoline Pd(II) complexes: mechanism of enantioselectivity

Preliminary studies of the elementary steps involved in the reaction of a chiral methyl carbonyl bioxazoline Pd(II) complex with aromatic olefins and CO have allowed development of a new enantioselective catalytic carbonylation process, leading to γ-ketoester derivatives with high yield and good enantiomeric excess. The intermediate palladacycle complexes have been isolated and characterized by NMR spectroscopy and X-ray diffraction. Factors that govern the stereoselectivity of the olefin carbonylation process are discussed.     

壳聚糖负载贵金属催化剂的研究进展

壳聚糖负载的贵金属催化剂显示了高催化活性和高选择性,已被用于氧化反应、氢化反应、烯丙基取代反应、羰基化反应、Suzuki和Heck偶联反应、烯烃的不对称二羟基化反应及有机醛、酮的合成反应体系中。本文对其制备方法、可能结构及其在各种反应体系中的催化性能进行了综述。     

Cu-Pd/MCM-22催化剂上二甲醚低温水解反应

 考察了分子筛的类型、硅铝比及Cu和Pd改性对分子筛催化剂上二甲醚低温水解活性的影响. 结果表明,酸性的MCM-22和HZSM-5分子筛催化剂具有较高的二甲醚水解活性,且其活性随着分子筛硅铝比的增加而降低. 这表明分子筛的类型及酸性对催化剂性能有重要影响,具有超笼结构的MCM-22分子筛上B酸中心的良好可接近性,使得该分子筛催化剂的水解活性较相同硅铝比的HZSM-5分子筛高. 与改性前相比, Cu和Pd改性后的MCM-22催化剂显示出更高的二甲醚水解活性.     

Homogeneous catalysis by ruthenium carbonyl clusters

The historical background of and the incentive for using ruthenium carbonyl clusters as homogeneous catalysts are outlined. Keeping in view the possible solutions the uncertainties arising from declusterification and metal colloid formation are discussed. All ruthenium cluster-catalysed reactions are broadly classified as reactions with or without carbon monoxide as one of the reactants and the basic differences between such reactions are highlighted. Some of the factors of special relevance to cluster-catalysed reaction systems are mentioned. The reactions involving carbon monoxide are then discussed. These include water-gas-shift reaction, carbon monoxide hydrogenation, hydroformylation, reductive carbonylation of nitrobenzene and other carbonylation reactions. Hydrogenation, transfer hydrogenation, isomerisation and a few other reactions are then discussed. For all these reactions, special emphasis is laid on well-characterised cluster complexes that have been proposed as catalytic intermediates. Finally an attempt has been made to identify the path that future research in cluster catalysis is likely to follow.     

烯烃裂解中分子筛催化剂的稳定性研究进展

低碳烯烃催化裂解增产丙烯是一项新技术,高水热稳定催化剂的研究和开发是关键技术之一,硅酸铝分子筛催化剂因具有相对较好的稳定性而得到了广泛研究. 本文总结了HY, HZSM-5和 MCM-22等微孔、介孔以及具有微-介孔复合结构的新型分子筛在烯烃催化裂解反应中的稳定性,特别是水热稳定性方面的研究进展,归纳了提高酸性分子筛催化剂水热稳定性的方法,比较了不同方法制得分子筛的催化裂解性能,对高稳定性催化剂在实际应用中的问题和前景进行了探讨,为研发新一代低碳烯烃裂解催化剂提供参考.     

钼、钨系过氧化物在Sharpless烯烃环氧化反应中的应用*

钼、钨系过氧化物是非常重要的Sharpless烯烃环氧化催化剂,有着非常广泛的工业发展前景。本文综述了钼、钨系过氧化物的种类,结构,合成方法及催化活性,分析了各种钼、钨系过氧化物的特点以及在催化环氧化领域的发展现状。同时,本文还讨论了钼、钨系过氧化物催化烯烃环氧化反应的机理。评述了在催化环氧化领域中两种主要理论——Mimoun机理与Sharpless机理的争论焦点及发展现状,以及计算化学对两种理论中间过渡态的研究进展,并且重点分析了Sharpless机理的过渡态结构。此外,本文还综述了影响钼、钨系过氧化物催化剂反应活性的各种因素以及质子所产生的副反应。最后,本文对应用于催化环氧化领域的钼、钨系过氧化物未来的研究方向提出了建议。     

Palladium(II,I, 0) Complexes in Catalytic Reactions of Oxidative Carbonylation

The mechanisms of carbonylation of alkenes, alkynes, and alcohols, including the mechanism of oxidative carbonylation of alkynes in the regime of self-oscillations catalyzed by Pd(II), Pd(I), or Pd(0) complexes, are analyzed. It is shown that the main reasons for the appearance of self-oscillations in the oxidation reactions are nonlinear and autocatalytic steps of generation and termination of active centers. The results of studying the functions of para-benzoquinone as an oxidant, ligand, and catalyst in the oxidative reactions are generalized. It is found that Pd(0) complexes with para-benzoquinone can catalyze oxidation reactions.     

Synthesis of MCM-41 supported amino-palladium complex and its catalytic performance for heck reaction

Using MCM-41 as the supporter, a series of MCM-41 supported amino-palladium complexes has been prepared and characterized by XRD (X-ray diffraction) and XPS (X-ray photoelectron spectroscopy), etc. The XRD and XPS results indicate that the Pd coordinates with the -NH₂ groups on the MCM-41 surface, and the structure of MCM-41 has been not damaged. Its catalytic performance for Heck arylation of alkene with aryl iodide shows that the catalysts have high activity and stereoselectivity in 70–90°C. The product of Heck reaction is in E form. And the effect of the preparation condition of catalyst on the catalytic performance was examined. Translated form Chinese Journal of Organic Chemistry, 2008, 28(5) (in Chinese)     

Pd/light-accelerated atom-transfer carbonylation of alkyl iodides: applications in multicomponent coupling processes leading to functionalized carboxylic acid derivatives

The atom-transfer carbonylation reaction of various alkyl iodides thereby leading to carboxylic acid esters was effectively accelerated by the addition of transition-metal catalysts under photoirradiation conditions. By using a combined Pd/hν reaction system, vicinal C-functionalization of alkenes was attained in which α-substituted iodoalkanes, alkenes, carbon monoxide, and alcohols were coupled to give functionalized esters. When alkenyl alcohols were used as acceptor alkenes, three-component coupling reactions, which were accompanied by intramolecular esterification, proceeded to give lactones. Pd-dimer complex [Pd(2)(CNMe)(6)][PF(6)](2), which is known to undergo homolysis under photoirradiation conditions, worked quite well as a catalyst in these three- or four-component coupling reactions. In this metal/radical hybrid system, both Pd radicals and acyl radicals are key players and a stereochemical study confirmed the carbonylation step proceeded through a radical carbonylation mechanism.     

Unraveling molecular transformations on surfaces: a critical comparison of oxidation reactions on coinage metals

The coinage metals, copper, silver, and gold, have unique characteristics for selective oxidation catalysis, particularly for partial oxidation of alcohols and olefins. A basic understanding of surface chemistry at the molecular level can help facilitate the improvement of current catalytic processes and the designing of new catalytic systems. In this critical review, the current state of knowledge of these reactions is reviewed. First, both the experimental and theoretical methods necessary for understanding surface reactivity are discussed with a specific set of examples directly related to these reactions. Next the state of understanding of the surface chemistry of the oxidation reactions of alcohols and olefins on these three coinage metals is reviewed and the reaction pathways are compared. Clear relationships between the low pressure surface science studies and more practical catalytic conditions are illustrated. Finally, recent theoretical advances in this area are discussed as well as possible future directions in this field (132 references).     

Solvent-free oxidation of alcohols by hydrogen peroxide over chromium Schiff base complexes immobilized on MCM-41

A series of chromium(III) Schiff base complexes immobilized on MCM-41 were prepared and characterized by various physicochemical and spectroscopic methods. The complexes were used for the selective oxidation of alcohols by 30% hydrogen peroxide without any organic solvent, phase transfer catalyst or additive. The immobilized complexes proved to be effective catalysts and generally exhibited much higher catalytic performance than their corresponding homogeneous analogs. The catalytic performance of the immobilized complexes was also found to be closely related to the Schiff base ligands used. Under the optimal reaction conditions, secondary alcohols, cyclic alcohols and benzyl alcohol were prevailingly oxidized to their corresponding ketones or aldehydes.     

固载化催化剂在烯烃氧化合成醛酮中的应用

总结了固载化催化剂在烯烃氧化合成醛酮中的应用。着重介绍了钯配合物固载在无机载本上,钯盐和杂多化合物固载在无机载体上,钯盐固载在化催化剂在烯烃氧化合成醛酮中的应用。对负载型液相催化剂,负载型水相催化剂,负载型熔融盐Wacker催化剂,活性C固载的Pd膜及Pt膜催化剂催化烯烃氧化合成醛酮也作了简单介绍。     

Highly atom efficient catalytic reactions utilizing water and alcohols as reagents

In this accounts, we describe our recent studies on hydrolysis, alcoholysis, and addition of alcohols to organic molecules. The reactions utilizing water and alcohols as a reagent are one of the most basic and simple reactions. The palladium-catalyzed asymmetric hydrolysis and alcoholysis of vinyl ethers gave valuable axially chiral 1,1′-bi-2-naphthol and 1,1′-bi-2-phenol derivatives and chiral P-chirogenic compounds in optically active form. The reaction is applied for hydrolytic deallylation of N-allyl amide and allyl esters. The later one was achieved by palladium/ruthenium dual catalysts which is the first example of catalytic irreversible ester hydrolysis. Gold complexes also catalyzed vinyl ether alcoholysis and hydroalkoxylation of olefins. In the later reaction, simple unactivated olefins can be used as substrates and gave the product in 92% yield. The copper-DTBM-SEGPHOS complex catalyzed alcoholysis of azlactones which is the first example showing zero-order kinetic resolution.     

Pd-catalyzed carbonylation of diazo compounds at atmospheric pressure: a catalytic approach to ketenes

The carbonylation of carbenes through catalytic cycles is highly desirable due to the importance of ketene-mediated reactions in organic synthesis. In this investigation, a highly efficient and mild catalytic approach toward ketene intermediates has been developed based on Pd-catalyzed carbonylation of diazo compounds with CO. When α-diazocarbonyl compounds or N-tosylhydrazone salts are heated in the presence of a palladium catalyst under atmospheric pressure of CO, ketene intermediates are formed in situ, where they undergo further reactions with various nucleophiles such as alcohols, amines, or imines. The Pd-catalyzed tandem carbonylation-Staudinger cycloaddition gives β-lactam derivatives in good yields with excellent trans diastereoselectivity. The results from DFT calculation on the reaction mechanism suggest that Pd is involved in the [2 + 2] cycloaddition process and affects the diastereoselectivity of the β-lactam products by assisting isomerization of the addition intermediate. On the other hand, the acylketenes generated from the Pd-catalyzed carbonylation of α-diazoketones react with imines in a formal [4 + 2] cycloaddition manner to afford 1,3-dioxin-4-one derivatives. This straightforward carbonylation provides a new approach toward highly efficient catalytic generation of ketene species under mild conditions.     

Carbonylation of Olefins under Mild Temperature Conditions in the Presence of Palladium Complexes

During a search for catalysts that allow carbonylation reactions on olefins to proceed below 100 °C, complex palladium(II ) compounds having the formula L_mPdX_n were found to be catalytically active. L denotes a ligand such as a phosphine, nitrile, amine, or olefin, X is an acid residue, and m+n is 3 or 4. The catalysts permit the carbonylation of heat-sensitive compounds, as well as selective carbonylation of polyunsaturated olefins. The new process can also be carried out on the industrial scale, as is shown by the carbonylation of cyclododecatriene     

Heck reaction catalyzed by PD-modified zeolites.

[Pd]-exchanged NaY zeolites have been prepared, characterized, and applied for the first time for catalytic carbon-carbon coupling reactions. The catalysts exhibit a high activity and selectivity toward the Heck reaction of aryl bromides with olefins for small palladium concentrations (< or =0.1 mol % of Pd). The catalysts can easily be separated from the reaction mixture and reused after washing without loss in activity. No limitation to the diffusion of adducts in the zeolite cages was observed (for linear alkenes). The electronic nature of the aryl bromides and the olefins has a dominating effect on the reaction yield and selectivity. The heterogeneous catalysts quantitatively convert all types of all aryl bromide (complete conversion of bromobenzene within 30 min) and activated aryl chlorides under standard reaction conditions. Product form selectivity is observed in the Heck reaction with cyclic olefins.     

Catalytic activity of Pd dithiolate complexes with large-bite-angle diphosphines in Heck coupling reactions

Palladium(II) complexes of aryl dithiolates and wide-bite-angle diphosphines Xantphos and dppf have been developed as efficient catalysts in Suzuki and Suzuki carbonylation reactions. The catalytic activity of these highly stable, discrete and charged complexes was investigated in Heck coupling reactions of styrene and a variety of aryl bromides. Under optimized reaction conditions these palladium complexes showed excellent activity with high turnover number (6 × 10⁶) and high turnover frequency (4 × 10⁵ h⁻¹). The effect of bite angle of diphosphines on the catalytic activity of the complexes [Pd₂(P^∩P)₂(SC₁₂H₈S)]₂(OTf)₄ followed the trend P^∩P = Xantphos > dppf > dppe as the order of their bite angles. The catalyst could be reused, and after three cycles the formation of significant amount of Pd nanoparticles was noticed, which were characterized using powder X-ray diffraction, energy-dispersive X-ray analysis and transmission electron microscopy. The high catalytic activity has been attributed to the Pd nanoparticles.     

Pd/Light‐Accelerated Atom‐Transfer Carbonylation of Alkyl Iodides: Applications in Multicomponent Coupling Processes Leading to Functionalized Carboxylic Acid Derivatives

The atom‐transfer carbonylation reaction of various alkyl iodides thereby leading to carboxylic acid esters was effectively accelerated by the addition of transition‐metal catalysts under photoirradiation conditions. By using a combined Pd/hν reaction system, vicinal C‐functionalization of alkenes was attained in which α‐substituted iodoalkanes, alkenes, carbon monoxide, and alcohols were coupled to give functionalized esters. When alkenyl alcohols were used as acceptor alkenes, three‐component coupling reactions, which were accompanied by intramolecular esterification, proceeded to give lactones. Pd‐dimer complex [Pd₂(CNMe)₆][PF₆]₂, which is known to undergo homolysis under photoirradiation conditions, worked quite well as a catalyst in these three‐ or four‐component coupling reactions. In this metal/radical hybrid system, both Pd radicals and acyl radicals are key players and a stereochemical study confirmed the carbonylation step proceeded through a radical carbonylation mechanism.