Das 3-Chlor-N-(propyl-3-piperazinyl-4-methyl)-phenthiazin (Stemetil Specia Paris)

Ohne Zusammenfassung     

Synthesis and antibacterial activity of new 5-substituted 1-cyclopropyl-6-fluoro-7-piperazinyl-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acids

The 5-hydroxymethyl and the 5-formyl-1-cyclopropyl-6-fluoro-7-piperazinyl-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acids have been prepared via a 5-trimethylsilyl group and were tested in vitro as potential antibacterials.     

Y2O3包覆LiCo1/3Ni1/3Mn1/3O2的电化学性能

通过在硝酸钇水溶液浸渍并焙烧的简单工艺,在LiCo1/3Ni1/3Mn1/3O2材料表面包覆了一层Y2O3.采用X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),循环伏安(CV)和恒流充放电对包覆和未包覆的LiCo1/3Ni1/3Mn1/3O2进行了测试分析.结果表明,Y2O3包覆并没有改变LiCO1/3Ni1/3Mn1/3O2的晶体结构,只存在于LiCo1/3Ni1/3Mn1/3O2的表面;与未包覆的材料相比,Y2O3包覆后的材料在高电位下具有更好的容量保持率和放电容量.CV测试表明,包覆层的存在有效抑制了材料层状结构的转变及电极与电解液的负反应.     

TiO2包覆对LiCO1/3Ni1/3Mn1/3O2材料的表面改性

为了提高材料LiCo1/3Ni1/3MnO2的循环件能,采用浸渍-水解法对其进行TiO2包覆.用X射线衍射(XRD)、电化学交流阻抗谱(EIS)、电感耦合等离子体发射光谱(ICP-OES)和恒流允放电测试研究包覆材料的结构和电化学性能.TiO2仅在材料表面形成包覆层,并未改变材料的结构.TiO2包覆能提高材料LiCo1/3Ni1/3Mn1/3O2的倍率性能和循环性能,TiO2包覆后的材料在5.0C(1.0C=160 mA·g-1)下的放电容量达到0.2C下的66.0%,而包覆前的材料在5.0C下的放电容量仅为其0.2C下的31.5%.包覆后的材料在2.0C下循环12周后的容最没有衰减,而未包覆的材料容量保持率仅为94.4%.EIS测试表明包覆材料性能的提高是由于循环过程中材料的界面稳定性得到了提高.循环后材料的XRD和ICP-OES测试表明,包覆层能提高材料LiCo1/3Ni1/3Mn1/3O2的结构稳定性.     

Investigation of 2, 1, 3-thia- and 2, 1, 3 selenadiazoles

The nitration of naphtho[1,2-d][2,1,3]thiadiazole under the conditions that are normally used for aromatic compounds gives a mixture of 6- and 9-nitronaphthothiadiazoles, which can be reduced to 6- and 9-amino derivatives, respectively. 6-Hydroxynaphthothiadiazole is obtained from 6-aminonaphthothiadiazole by the Sandmeyer reaction, while 8-hydroxynaphthothiadiazole is converted to the 8-amino derivative under the conditions of the Bucherer reaction. 4-Carboxy-5-(o-carboxyphenyl)-2,1,3-thiadiazole was obtained by the oxidation of naphtho[1,2-d][2,1,3]-thiadiazole with a potassium dichromate-dilute sulfuric acid mixture.See [1] for communication LXVI.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1496–1502, November, 1972.     

Synthesis of 1-alkyl-2-methylazetidin-3-ones and 1-alkyl-2-methylazetidin-3-ols

Several 1-alkyl-2-methylazetidin-3-ones were prepared in good yield by the hydride-induced cyclization of the corresponding β-bromo-α,α-dimethoxyketimines, the resulting 3,3-dimethoxyazetidines being hydrolyzed by acid. Imination of these 1,2-disubstituted azetidin-3-ones, followed by alkylation under kinetic control conditions resulted in regioisomeric mixtures of 2,4- and 2,2-dialkylated compounds. Analytical samples of the major 2,4-disubstituted derivatives were obtained after extensive chromatographic separation. The cis stereochemistry of the major 2,4-dialkylated isomer was demonstrated on the basis of NMR data.     

One-pot synthesis of 1-monosubstituted-1, 2, 3-triazoles from 2-methyl-3-butyn-2-ol

An efficient method for the synthesis of 1-monosubstituted-1, 2, 3-triazoles from 2-methyl-3-butyn-2-ol under copper catalyst conditions has been developed through a one-step one-pot sequence. This method provides a concise and efficient pathway to synthesize 1-monosubstituted-1, 2, 3-triazole derivatives in good to excellent yields.     

CoAl2O4包覆LiNi1/3Co1/3Mn1/3O2的电化学性能

通过共沉淀法制得类球形锂离子电池正极材料LiNi_1/3Co_1/3Mn_1/3O₂,并用非水相共沉法对其进行CoAl₂O₄包覆得到LNCMO(x). 采用X射线衍射（XRD）、扫描电子显微术（SEM）和透射电子显微术（TEM）测试材料的结构和观察材料形貌. 结果表明,CoAl₂O₄在材料表面形成8 nm均匀包覆层,未改变主体材料的结构. 电化学性能测试表明,1%（by mass）CoAl₂O₄包覆量的LiNi1/3Co1/3Mn1/3O2材料（LNCMO(1)）高充电电压（3.0 ~ 4.6 V,150 mA·g^-1）100周期循环放电容量保持率为93.7%（无包覆LNCMO(0)保持率为74.4%）;55 °C高温100周期循环容量保持率为77%（无包覆LNCMO(0)保持率17%）. XRD和电感耦合等离子体原子发射光谱（ICP-AES）测试表明,CoAl₂O₄包覆的LNCMO(x)材料可有效地减缓材料中Mn离子在电解液的溶解,提高材料结构稳定性和热稳定性.     

Michael reactions withtrans-3-isopropenyl-2-phenylthiocyclopentan-1-one andtrans-3-isopropenyl-2-phenylsulfonylcyclopentan-1-one

The condensation of methyl acrylate with the title -ketosulfide and -ketosulfone was studied. The primary adduct of -ketosulfone with acrolein readily undergoes intramolecular aldolization to give bicyclo[3.2.1]octane derivatives. The molecular structure of one of them was elucidated by X-ray analysis.Deceased Nov., 1, 1992.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 118–122, January, 1993.     

1-Organyl-2-azasilatran-3-ones

New 1-organyl-2-azasilatran-3-ones have been synthesized via the reaction of trifunctional silanes RSiX₃ (R = Et, Pr, Ph, CH₂=CH, or ClCH₂; X = Cl or Me₂N) with N,N-bis(2-hydroxyethyl)glycinamides (HOCH₂CH₂)₂NCH₂C(O)NHR (R = H or Me) and their N′,O-trimethylsilyl derivatives. The obtained products can be hydrolyzed to give the corresponding organylsilanetriols. Lithiation of 1-methyl- and 1-phenyl-2-azasilatran-3-ones with n-butyllithium or their reduction with lithium aluminum hydride leads to the products of splitting of the atrane backbone RSiBu₃ and RSiH₃ (R = Me or Ph), respectively.