疏水缔合型水溶性高分子的合成与表征

本文综述了疏水缔合型水溶性高分子的合成与表征方法，６文中介绿了在合成过程中提高油溶性单体和水溶性单体的混溶性以及疏水基团均匀分布的方法，并了用核磁共振，上光谱等方法测定疏水物含量的方法。     

含树枝体疏水缔合聚合物——聚醚树枝体改性聚丙烯酰胺的合成和性质

疏水缔合聚合物是一类含有少量疏水基团的水溶性功能高分子.在水溶液中,这类聚合物在疏水作用驱动下容易发生缔合,并伴随产生独特的缔合行为和溶液性质,因此研究这类聚合物具有重要的理论和应用意义.     

水溶性高聚物的研究进展

自八十年代初，水溶性高聚物再次成为高分子科学研究热点，评述了水溶性高聚物，特别是疏水缔合型改性水溶性高聚物的最新进展。     

水溶性疏水缔合型聚(丙烯酰胺-丙烯酸十六酯)溶液性质的研究

采用沉淀聚合法制备水溶性的丙烯酰胺－丙烯酸十六疏水缔合型共聚物,研究了共聚物水溶液的性质及其影响因素。随着疏水基团含量增加,共聚物在纯水中及NaCl溶液中的特性粘数[η]均减小,疏水基团临界缔合浓度降低。共聚物溶液浓度高于监界缔合浓度时,溶液表现粘度急剧增加,表明溶液中分子间缔合大量形成。     

疏水缔合(丙烯酰胺十六烷基二甲基烯丙基氯化铵-2-丙烯酰胺基-2-甲基丙磺酸)三元共聚物的合成与性能研究

疏水缔合水溶性聚合物是指在聚合物亲水性大分子链上引入少量疏水基团的一类水溶性聚合物[1～5].在水溶液中,疏水基团之间由于憎水作用而发生聚集,使大分子链产生分子内与分子之间缔合.在临界缔合浓度以上,以分子间缔合为主,增大了流体力学体积,因此,具有较好的增粘作用.疏水基的加入可大幅度地改变聚合物的流变性能.在聚合物驱油中的流度控制,提高波及效率、以及调剖中起到非常重要的作用.     

PABA疏水缔合水溶性共聚物溶液的合成与性能研究

本文根据高分子的分子设计原理，合成了带苯基的疏水单体N－苯基对正丁基丙烯酰胺（BBAM）。采用自由基胶束共聚的方法制备了水溶性丙烯胺／N－苯基对正丁基丙烯酰胺（BBAM）疏水缔合型共聚物（PABA）。研究了共聚物溶液的性能及影响因素。结果表明，随共聚物溶液浓度的增加，在临界缔合浓度以上，分子间缔合大量形成，水溶液表现粘度迅速增加，表现出明显的疏水缔合行为，与HPAM相比有优异的抗盐性。     

改性聚丙烯酰胺水溶液的疏水缔合性质

合成了一种疏水缔合水溶性聚丙烯酰胺共聚物,使用荧光光谱法并结合紫外及流变性实验,对制备的疏水缔合水溶性聚丙烯酰胺共聚物在水溶液中形成疏水微区、超分子聚集体及空间网络结构进行了研究,并用扫描电子显微镜证实了溶液中网络结构的存在.     

疏水化水溶性聚电解质的增粘作用

疏水化水溶性聚电解质是一种大分子主链或侧链上含有少量疏水基团的新型水溶性功能高分子材料,在水溶液中具有良好的耐盐耐温增粘作用和贮存稳定性。对该类聚电解质的特殊增粘作用及分子结构、聚合物浓度、无机盐、机械剪切作用、ｐＨ、温度、表面活性剂、老化时间及与其他疏水化水溶性聚合物作用等影响因素进行了综述。     

P(AM-NVP-DMDA)疏水缔合水溶性共聚物的研究

采用自由基水溶液共聚合法制备了Ｐ（ＡＭ－ＮＶＰ－ＤＭＤＡ）疏水缔合水溶性共聚物。对共聚物的溶液性能进行了研究,包括盐效应、粘温关系、流变性能、热稳定性、与碱、表面活性剂的相互作用、稀溶液性质等。共聚物分子中由于引入了较多的疏水基团而具有较强的疏水缔合效应,在聚合物浓度较低时具有较高粘度。ＮＶＰ结构单元的引入可适当提高共聚物溶液的热稳定性。对共聚物溶液的电镜分析结果表明,在其水溶液中存在着微相分离结构,它对共聚物溶液的增粘起着重要作用。     

疏水缔合聚丙烯酰胺的合成及溶液性能研究

水溶性疏水缔合聚合物是在聚合物亲水主链上引入极少量疏水基团(一般小于2ｍｏｌ%)而形成的一种新型水溶性聚合物[1]。由于这类聚合物具有独特的流变性能,因而备受学术界和工业界关注。目前已作为涂料增稠剂[2]和流变改性剂[3]得到了应用,而通过在部分水解聚丙烯酰胺(ＨＰＡＭ)的亲水主链上引入少量疏水单体而形成的疏水缔合聚丙烯酰胺(ＨＡＰＡＭ)则可望克服ＨＰＡＭ耐温、耐盐性差的缺陷[4]而作为新一代水溶性聚合物材料用于油气开采作业[5,6]。由于亲水单体和疏水单体的不相容性,通常通过在反应溶液中加入表面活性剂使亲水单体和疏水单体…     

Rheological properties of hydrophobically modified alkali-soluble polymers—effects of ethylene–oxide chain length

The rheological properties of hydrophobic alkali-soluble associative polymers (HASE) were studied using controlled rate (Mettler LS40) and controlled stress (TA CSL 500) rheometers. The effects of pH and polymer concentrations on the rheological properties of three HASE model polymer systems (i.e., HASE 5141, 5134, and 5142, with a degree of ethoxylation of 2.5, 10, and 40 mol, respectively) and a reference polymer without associative hydrophobes (MAAEA) were examined. As the pH is increased by addition of ammonia to greater than 5–6, the carboxyl groups ionize to carboxylate ions and the polymers become water soluble. The HASE polymers thicken mainly by hydrophobic association. Viscosity can increase by two to three orders of magnitude as pH is raised to 9. The degree of ethoxylation in the macromonomer controls the nature of the hydrophobic association junctions by altering the flexibility and hydrophobicity of the macromonomer. Optimum thickening efficiency is observed in the system with approximately 10 mol of an ethylene–oxide spacer between the polymer backbone and the macromonomer. Viscoelastic study shows that the maximum thickening efficiency also corresponds to the dominant elastic property observed in the system with 10 mol of EO. All the model systems except the control system without hydrophobe exhibit strain thickening of the viscous and elastic components. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2275–2290, 1998     

疏水缔合水溶性聚合物溶液性能研究进展

本文针对疏水缔合水溶性聚合物的稀溶液和半浓溶液两种情况，综述了最近十多年来溶液的性能的研究进展。文中讨论了表征分子量和疏水相互作用的特性粘数与Huggins常数。分别介绍了聚合物浓度、分子量、疏水基类型、含量、长短及序列分布、离子基团的种类和位置、剪切速率、温度以及化学相互作用对溶液性能的影响。     

Synthesis and hydrophobic association of poly(N,N‐dimethylacrylamide) end‐functionalized with perfluorocarbon and hydrocarbon groups

Polydimethylacrylamides (PDMAs) end‐functionalized with hydrophobic groups were synthesized by the reaction of cesium salts of one‐ or two‐ended living PDMA anion with octadecanoyl and perfluorooctanoyl chlorides and with α‐phenylacrylate monomers containing an octadecyl group attached via oligooxyethylene spacers to the acrylate functionality. Size exclusion chromatography or NMR studies indicated that the end functionalizations were nearly quantitative. Reduced viscosity measurements were consistent with predominantly dimeric association of the perfluorooctanoyl‐end‐functionalized PDMAs. The association of the two‐ended, perfluorooctanoyl‐ and octadecanoyl‐functionalized polymers was more extensive and consistent with pairwise association. Furthermore, the presence of oligoethylene oxide spacers between the octadecyl and α‐phenylacrylate groups greatly enhanced the hydrophobic association of bis(octadecyl)‐end‐functionalized PDMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1403–1418, 2001     

A fluorine-containing hydrophobically associating polymer. I. Synthesis and solution properties of copolymers of acrylamide and fluorine-containing acrylates or methacrylates

Fluorine-containing hydrophobically associating polymers have been synthesized by copolymerization of acrylamide with a small amount of an acrylate or methacrylate having a fluorocarbon containing ester group. It was found that hydrophobic associations occurring between these fluorocarbon chains was stronger than the interactions of the corresponding hydrocarbon comonomers and depend on the length of the fluorocarbon chain. The rheological properties of the copolymer solutions were studied. The solutions were found to be highly pseudoplastic but the viscosity loss was completely reversible upon removal of shear. Evidence for hydrophobic association of the fluorocarbon groups was obtained by the dependence of the Brookfield viscosity on temperature, the addition of NaCl, and the addition of organic solvents, urea, and surfactants.     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

The Role of Hydrophobicity in the Cellular Uptake of Negatively Charged Macromolecules

It is generally accepted that positively charged molecules are the gold standard to by‐pass the negatively charged cell membrane. Here, it is shown that cellular uptake is also possible for polymers with negatively charged side chains and hydrophobic backbones. Specifically, poly[5‐methoxy‐2‐(3‐sulfopropoxy)‐1,4‐phenylenevinylene], a conjugated polyelectrolyte with sulfonate, as water‐soluble functional groups, is shown to accumulate in the intracellular region. When the polymer hydrophobic backbone is dissolved using polyvinylpyrrolidone, an amphiphilic macromolecule, the cellular uptake is dramatically reduced. The report sheds light on the fine balance between negatively charged side groups and the hydrophobicity of polymers to either enhance or reduce cellular uptake. As a result, these findings will have important ramifications on the future design of targeted cellular delivery nanocarriers for imaging and therapeutic applications.     

聚丙烯酰胺类疏水缔合物的增黏因素研究

合成了6种不同修饰度的聚丙烯酰胺疏水聚合物(PAM1~PAM6), 考察了聚合度、 共聚物片段含量及疏水基团大小等内部因素和聚合物的抗剪切能力、 剪切恢复性及抗盐性等外部因素对这些疏水聚合物分子间、 分子内缔合的影响规律.     

兼具有强阴离子性与疏水缔合性的丙烯酰胺三元共聚物

在微乳液介质中实施了丙烯酰胺 (AM)、苯乙烯 (St)、2 丙烯酰胺基 2 甲基丙磺酸钠 (NaAMPS)的共聚合 ,制备了既含有强阴离子性基团 (—SO3Na)又含有疏水基团 (St)的丙烯酰胺三元共聚物AM NaAMPS St;通过红外光谱法、紫外分光光度法及元素分析法对共聚物的结构及组成进行了表征 ;稀释外推粘度法测定了共聚物的特性粘数 ;测定了共聚物纯水溶液及盐水溶液的表观粘度 ;荧光探针法考察了三元共聚物的疏水缔合性以及离子基团对疏水缔合性的影响规律 .实验结果表明 ,在聚丙烯酰胺 (PAM )分子主链上同时引入强阴离子性基团与疏水基团后 ,阴离子的电粘效应与疏水基团的疏水缔合作用相互协同 ,会使共聚物水溶液的黏度显著提高 ;盐溶液对疏水缔合作用的增强效应与强阴离子基团对盐的较大容忍度相互结合 ,会使共聚物水溶液的抗盐性能明显得以提高 ;大分子链上的强阴离子基团磺酸根的存在 ,在一定程度上会削弱疏水基团之间的疏水缔合作用 ,即对疏水基团的疏水缔合行为会产生一定的负性影响 .     

A Molecular Torsion Balance Study: A Nearby Anionic Group Exerts Little Influence on Hydrophobic Interactions between Nonpolar Surfaces

Polar groups have a solvent ordering effect on water and therefore may affect hydrophobic binding energies for nearby lipophilic surfaces. This would mean that determinations of excess surface free energy association energies require consideration of nearby polar functional groups. This paper reports results of a study to measure this possible effect. It was concluded from the models used here that an anionic polar group nearby a hydrophobic surface has little or no effect on the magnitude of hydrophobic association.     

表活性单体NaAMCnS及其聚合物的合成及性能研究

针对疏水缔合聚合物水溶性不足的问题，本文合成了三种含烷基磺酸根的阴离子型表面活性单体2-丙烯酰胺基辛烷基磺酸钠（NaAMC₈S）、2-丙烯酰胺基十二烷基磺酸钠(NaAMC₁₂S)和2-丙烯酰胺基十八烷基磺酸钠(NaAMC₁₈S),通过氢谱、碳谱、高分辨质谱对其结构进行了表征。通过表面张力法和电导率法测定了NaAMC₈S和NaAMC₁₂S的临界胶束浓度；用荧光探针技术研究了其增溶作用；以偶氮二异丁脒盐酸盐（AIBA）为引发剂，在水溶液中研究了丙烯酰胺（AM）分别与NaAMC₈S、NaAMC₁₂S的二元共聚反应，通过控制AM与NaAMC₈S、NaAMC₁₂S的投料比制备得到两个系列聚合物P（AM/NaAMC₈S）、P(AM/NaAMC₁₂S),研究了表面活性单体含量对聚合物疏水缔合作用及耐温抗盐性能的影响。实验结果表明，NaAMC₈