Full Characterization and some reactions of 1‐(2‐adamantyl)‐3‐(1‐adamantyl)aziridin‐2‐one

We found that 1‐(2‐adamantyl)‐3‐tert‐butylaziridin‐2‐one ( 5a ) is unstable. It slowly decomposes at room temperature, although detectable by IR spectroscopy (1840 cm^?1 band in CCl₄). On the other hand, a closely related analogue, 1‐(2‐adamantyl)‐3‐(1‐adamantyl)aziridin‐2‐one ( 5b ), is very stable, in concurrence with an earlier report [1]. We fully characterized aziridinone 5b , identified its thermal decomposition products ( 7 and 8 ) and reacted it with two aprotic ionic (tBuO^? and HO^?) and one protic non‐ionic nucleophile (benzylamine). All three products ( 9b , 10 , and 11 ) result from exclusive cleavage of the lactam (1‐2) bond.     

Identification and biological activity of microbial metabolites of xanthohumol

Microbial transformation of xanthohumol using the culture broth of Cunninghamella echinulata NRRL 3655 afforded (2S)-8-[4"-hydroxy-3"-methyl-(2"-Z)-butenyl]-4',7-dihydroxy-5-methoxyflavanone (5) and (2S)-8-[5"-hydroxy-3"-methyl-(2"-E)-butenyl]-4',7-dihydroxy-5-methoxyflavanone (6). Xanthohumol (1) and flavanone 6 as well as (E)-2"-(2"'-hydroxyisopropyl)-dihydrofurano[2",3":4',3']-2',4-dihydroxy-6'-methoxychalcone (2), (2S)-2"-(2"'-hydroxyisopropyl)-dihydrofurano[2",3":7,8]-4'-hydroxy-5-methoxyflavanone (3) obtained with Pichia membranifaciens showed antimalarial activity against Plasmodium falciparum.     

Unexpectedly rapid vapor-phase reaction between bromine and methyl iodide

The overall reaction (1) occurs readily in the gas phase, even at room temperature in the dark. The reaction is much faster than the corresponding process and does not involve the normal bromination mechanism for gas phase reactions. Reaction (1) is probably heterogeneous although other mechanisms cannot be excluded. The overall reactions (1) (2) proceed, for all practical purposes, completely to the right-hand side in the vapor phase. The expected mechanism is (3) (4) (5) (6) (7) where reaction (3) is initiated thermally or photochemically. Reaction (4) is of interest because little kinetic data are available on reactions involving abstraction of halogen by halogen and also because an accurate determination of the activation energy E₄ would prmit us to calculate an acccurate value of the bond dissociation energy D(CH₃? I).     

Three‐Component Synthesis of Highly Functionalized 5‐Acetyloxazoles

By a flexible three‐component synthesis, alkoxy‐substituted enamides are easily available from lithiated alkoxyallenes, nitriles and carboxylic acids (see scheme). The treatment of these versatile intermediates with trifluoroacetic acid provided 5‐acetyloxazoles in moderate to good yields. Different substituents are possible at C‐2 and C‐5 and the 5‐acetyl group is a suitable handle for further synthetic transformations.

     

A simple one‐pot synthesis of 1,2,3,4‐tetrahydro‐2‐thioxopyrimidine derivatives

5‐Benzoyl‐4‐(substituted phenyl)‐6‐phenyl‐1,2,3,4‐tetrahydro‐2‐thioxopyrimidines ( 4a‐d ) were synthesized using the Biginelli three component cyclocondensation reaction of an appropriate β‐diketone, arylaldehyde, and thiourea in acetic acid under reflux condition in approximately 52‐65% yields. The acetylation of compounds 4a‐d gave 3‐acetyl thioxopyrimidine derivatives 5a‐d . Also, pyrimidothiazine compounds 6a‐d were prepared by a simple one‐pot condensation reaction of starting pyrimidine derivatives 4a‐d and 3‐bromopropionic acid. The structures of compounds were characterized on the basis of elemental analyses, IR, ¹H and ¹³C‐NMR spectra.     

Formation of Patches on 3D SAMs Driven by Thiols with Immiscible Chains Observed by ESR Spectroscopy

Beyond stripes : The extreme lipophobicity of perfluorinated chains attached to amphiphilic thiolates triggers the formation of “stars” (or patches) surrounded by amphiphilic alkylthiolates in three‐dimensional self‐assembled monolayers. This strategy led to the first example of a water‐soluble multicompartment monolayer wrapped around a gold core.

     

Contribution à l'étude du système quaternaire K+?NH4+?CrO?SO?H2O: II. L'isotherme de 25°C

The study at 25°C of the system K⁺? NH? CrO? SO? H₂O has shown experimentally the existence of a new type of quaternary system of solubility with two cations and two anions. The solubility diagramm is caracterized by the presence of two adjacent ternary limiting systems with a miscibility gap, three univariant lines (one of them being evanescent), one invariant point, three binary and one ternary miscibility gaps.     

Alpha-glucosidase inhibitory constituents from Duranta repens

Three C-alkylated flavonoids 7-O-alpha-D-glucopyranosyl-3,5-dihydroxy-3'-(4"-acetoxyl-3"-methylbutyl)-6,4'-dimethoxyflavone (1), 7-O-alpha-D-glucopyranosyl-3,4'-dihydroxy-3'-(4"-acetoxyl-3"-methylbutyl)-5,6-dimethoxyflavone (2), 3,7,4'-trihydroxy-3'-(8"-acetoxy-7"-methyloctyl)-5,6-dimethoxyflavone (3) and a trans-clerodane type diterpenoid (-)-6beta-hydroxy-5beta,8beta,9beta,10alpha-cleroda-3,13-dien-16,15-olid-18-oic acid (4) are reported from Duranta repens along with (+)-hardwickiic acid (5) and (+)-3,13-clerodadien-16,15-olid-18-oic acid (6), isolated for the first time from this species. Their structures were established on the basis of the spectral methods, especially two dimensional (2D) NMR spectroscopy.     

N-aminopyrroledione-hydrazonoketene-pyrazolium oxide-pyrazolone rearrangements and pyrazolone tautomerism

Flash vacuum thermolysis (FVT) of 1-(dimethylamino)pyrrole-2,3-diones 5 causes extrusion of CO with formation of transient hydrazonoketenes 7. The transient ketenes 7 are observable in the form of weak bands at 2130 (7a) or 2115 cm-1 (7b) in the Ar matrix IR spectra resulting from either FVT or photolysis of either 5 or 1,1-dimethylpyrazolium-5-oxides 8, and these absorptions are in excellent agreement with B3LYP/6-31G* frequency calculations. Under FVT conditions the ketenes 7 cyclize to pyrazolium oxides 8, which undergo 1,4-migration of a methyl group to yield 1,4-dimethyl-3-phenylpyrazole-5(4H)-one 9a and 1,4,4-trimethyl-3- phenylpyrazole-5(4H)-one 9b. All three tautomers of 9a have been characterized, viz. the CH form 9a (most stable form in the gas phase, the solid state and solvents of low polarity), the OH form 9a' (metastable solid at room temperature) and the NH form 9a" (stable in aprotic dipolar solvents). The isomeric 1,4-dimethyl-5-phenylpyrazole-3(2H)- one 12 tautomerizes to the 3-hydroxypyrazole 12'. The crystal structure of the hydrochloride 14 of 9a'/9a" is reported, representing the first structurally characterised example of a protonated 5-hydroxypyrazole.     

Antiferromagnetic Ground State of a C60‐Covered Si(001) Surface

Modeling magnetism: The antiferromagnetic ground state of the C₆₀/Si(001)‐c(4×4) surface is predicted by means of density functional theory calculations. Two adjacent dangling bonds (DBs) generated by the adsorption of C₆₀ are antiferromagnetically coupled with each other. This study demonstrates that magnetic Si surfaces can be prepared by engineering single Si DBs with unpaired electrons.

     

Assembly of Chiral Two- and Three-dimensional Copper(I) Pseudohalide Based Coordination Polymers with Asymmetrically Substituted Pyrazine and Pyrimidine Ligands

The coordination polymers [(CuCN)₂(μ-2 Mepyz)], [CuCN(μ-2 Mepyz)] and [CuCN(μ-4 Mepym)] ( 1 – 3 ) (2 Mepyz = 2-methylpyrazine; 4 Mepym = 4-methylpyrimidine) may be prepared by self-assembly in acetonitrile solution at 100 °C ( 1 , 3 ) or without solvent at 20 °C ( 2 ). All three contain [CuCN] chains that are bridged by the bidentate aromatic ligands into sheets in 1 and 3 D frameworks in 2 and 3 . Reaction of CuSCN with these heterocyclic diazines at 100 °C leads to formation of the lamellar coordination polymers [(CuSCN)(μ-2 Mepyz)] ( 4 ) and [CuSCN · (4 Mepym-κN1)] ( 5 ), which contain respectively [CuSCN] chains and trans-trans fused [CuSCN] sheets as substructures. The presence of an asymmetric substitution pattern in 2 Mepyz and 4 Mepym induces the adoption of a chiral structure by 2 and 5 (space groups P2₁2₁2₁ and P1).     

Synthesis and spectral data of quinoline products obtained by reaction of N‐(4‐pyridinyliden)anilines and N‐benzylidenaniline with 2,2‐dimethoxypropane (kametani reaction)

A study on interaction between N‐(4‐pyridinyliden)anilines 1‐4 and 2,2‐dimethoxypropane under Kametani reaction conditions was realized. According to the GC‐MS analysis of crude reaction, besides the needed 4‐methyl‐2‐(4‐pyridinyl)quinolines 5‐8 , three collateral products: secondary amines 9‐12 , 4‐(2‐methylprop‐1‐enyl)quinolines 13‐16 and 4‐(2‐methoxy‐2‐methylpropyl)quinolines 17‐20 were formed. Unexpected quinolines 13‐16 as well the desired quinolines 5‐8 were isolated and fully characterized. In contrast, a condensation of N‐benzylidenaniline 21 with 2,2‐dimethoxypropane afforded a set of different quinoline products.     

Dichloro dicyano quinone (DDQ) as coupling reagent for high yield synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones

DDQ catalyzes efficiently the three‐component condensation reaction of aldehyde, β‐ketoester and urea in refluxing acetonitrile to afford the corresponding dihydropyrimidinones. Compared to the classical Biginelli reaction conditions, this new approach consistently has the advantage of excellent yields (80‐92%) and short reaction times 1.5‐2.5 h.     

One-pot parallel solution-phase synthesis of 1-substituted 4-(2-aminoethyl)-1H-pyrazol-5-ols

Two variations of enaminone-based parallel solution-phase synthesis of 1-substituted 4-(2-aminoethyl)-1 H-pyrazol-5-ols 8 and their NH-tautomers 8' were developed. The synthetic strategy comprises a two step preparation of the N-protected alpha-enamino lactams 3a and 3b from 2-pyrrolidinone (1), "ring switching" transformation of 3a, b with monosubstituted hydrazines 4a-u, and acidolytic removal of the N-protecting group. In order to ensure a clean and fast conversion, reactions of Cbz-enaminone 3a with hydrazines 4a-k were carried out under microwave irradiation to afford the "ring-switched" intermediates 7a-k. Deprotection of 7a-k with HBr-AcOH at 50 degrees C gave a library of 11 analytically pure 4-(2-aminoethyl)-1 H-pyrazol-5-ols (di)hydrobromides 8/ 8'a-k in 16-75% yields over two steps. The other reagent, Boc-enaminone 3b, was more reactive and ring switching transformations with hydrazines 4b, d, k proceeded smoothly and cleanly under conventional heating. Finally, a parallel one-pot transformation of the Boc-enaminone 3b with hydrazines 4a-u followed by subsequent deprotection of the intermediates 9a-u with HCl-EtOAc furnished a library of 21 analytically pure 4-(2-aminoethyl)-1 H-pyrazol-5-ols (di)hydrochlorides 8/ 8'a-u in 40-100% yields.     

Towards Clathrates: Frozen States of Hydration of tert‐Butylamine

The dilution of tert‐butylamine (tBA) with water and subsequent cooling leads to a large series of different crystalline hydrates by an in situ IR laser melting‐zone procedure. The crystal structures were determined for tBA?n H₂O, with n=0, , 1, 7 , 7 , 9 , 11, and 17. For the two lower hydrates (n= , 1), one‐ and two‐dimensional hydrogen‐bonded networks are formed, respectively. The higher hydrates (n>1) exhibit a clathrate‐like three‐dimensional water framework with the tBA molecules as part of, or sitting inside, the cages. In all cases, tBA is hydrogen‐bonded to the H₂O framework. In the intermediate range (1相似文献   

Organische Phosphorverbindungen XXVIII. Die α-Aminoalkylierung von elementarem weissem Phosphor. Eine einfache Methode zur Darstellung von tertiären Phosphinoxiden,Phosphinsäuren und Phosphonsäuren [1]

White phosphorus reacts with N-hydroxymethyl-dialkylamines to give mainly three products, i.e., tris(dialkylaminomethyl) phosphine oxides, bis(dialkylamino-methyl) phosphinic acids, and dialkylaminomethyl phosphonic acids, according to the equation: The yield of the various products depends mainly upon the ratio of the reactants, the pH, and the solvents used.     

Electrochemical Detection of ClO$\rm{ {_{3}^{-}}}$, BrO$\rm{ {_{3}^{-}}}$, and IO$\rm{ {_{3}^{-}}}$ at a Phosphomolybdic Acid Linked 3‐Aminopropyl‐Trimethoxysilane Modified Electrode

A composite film modified electrode containing a Keggin‐type heteropolyanion, H₃(PMo₁₂O₄₀)?H₂O, was fabricated with 3‐aminopropyltrimethoxysilane (APMS) attached on an electrochemically activated glassy carbon (GC) electrode through the formation of C? O? Si bond. PMo₁₂O was then complexed with APMS through the electrostatic interaction between the phosphate groups of PMo₁₂O and amine groups of APMS (PMo₁₂O ‐APMS). XPS and cyclic voltammetry were employed for characterization of the composite film. The PMo₁₂O ‐APMS modified electrode showed three reversible redox pairs with smaller peak‐separation and was stable in the larger pH range compared with that in a solution phase. The catalytic properties of the modified electrode for the reduction of ClO , BrO , and IO were studied and the modified electrode exhibited good electrocatalytic activities for the three anions. The experimental parameters, such as pH, temperature, and the applied potential were optimized. The detection limits were determined to be 7.0±0.35 μM, 4.0±0.17 μM, and 0.1±0.04 μM for ClO , BrO , and IO , respectively. The modified electrode was applied to natural water samples for the detection of ClO , BrO , and IO .     

A kinetic study of the autocatalytic permanganate oxidation of formic acid

The kinetics of the permanganate oxidation of formic acid in aqueous perchloric acid has been studied. The results indicate that this reaction is autocatalyzed by both manganese(II) ion (formed as a reaction product) and colloidal manganese dioxide (formed as an intermediate). The apparent rate constants corresponding to the noncatalytic and autocatalytic reaction pathways are given, respectively, by the following equations The activation energies associated with the true rate constants, ??, ??, ??, ??, ??, and ?? are 37.2, 62.5, 70.9, 52.5, 40.8, and 59.9 kJ mol^?1, respectively. The percentage of the total reaction corresponding to each pathway is given for typical experimental conditions. Mechanisms in agreement with the kinetic data are proposed for the six different reaction pathways observed.     

Tuning and dissecting electronic and steric effects in ammonium receptors: nonactin vs artificial receptors

Ion selective electrodes (ISE) based on three different tripodal receptors (5, 6, and 7) have been investigated for sensing ammonium ion. Each receptor is based on three pyrazole groups that can accept three H-bonds from the bound ammonium ion. The receptor based on 4-bromo-3,5-dimethylpyrazole (6) is the most sensitive with a detection limit for ammonium ion of 2.5 x 10(-5) M at pH 8. The detection limits for the receptors based on 2,3-dimethylpyrazole (5) and unsubstitued pyrazole (7) are 1.0 x 10(-4) and 2.0 x 10(-4) M, respectively. The selectivities of the receptors 5, 6, and 7 for sensing ammonium ion over potassium ion (logK(NH)4+(/K)+) are -2.8, -2.3, and -1.7, respectively. In contrast, the detection limit and the selectivity of a nonactin-based ISE are 2.2 x 10(-5) M and -1.3, respectively. Crystallographic studies reveal that 6 accepts three H-bonds from the bound ammonium and singly protonated receptor 5 forms three H-bonds with the bound water molecule.     

Cationic Graft Copolymers as Carriers for Delivery of Antisense‐Oligonucleotides

Self‐assembling systems based on ionic complexes of DNA fragments (36 base pairs), bcl‐2 antisense oligonucleotides (octadecamer), oligophosphates (25 phosphate groups) or acrylic oligomers (18 groups of phosphonic acid) with poly(L ‐lysine) (PLL) ( = 130 000 and 88 000) grafted with short poly[N‐(2‐hydroxypropyl)methacrylamide] (PHPMA) chains ( = 4 300 or 8 600) were studied by static and dynamic light scattering methods as systems suitable for gene therapy applications. The graft copolymers (GPLLs) with shorter PHPMA grafts ( = 4 300) provide polyelectrolyte complexes (PECs) with smaller and R_H than the corresponding GPLLs with longer grafts ( = 8 600) and the same content of PLL. The lowest aggregation number of 2 was observed for PECs prepared from the GPLL with short grafts and 40 wt.‐% of PLL. The complexes of oligonucleotides and DNA fragments with GPLLs showed quite similar behavior to that with oligophosphates and acrylic oligomer. The complexes prepared from GPLLs containing 40 wt.‐% of PLL and at excess of oligophosphate were stable for at least 48 h under physiological conditions (0.15 M NaCl) and in bovine serum albumin solutions (1 mg · mL^?1). Additionally, polyanion exchange reactions of the PECs in contact with poly(styrenesulfonate) and DNA were studied in 0.15 M NaCl solutions. The oligophosphates in complexes were at least partially substituted with high‐molecular‐weight polyanions. The structure of the initial PECs dominated the PEC structure after the exchange reaction.

The dependence of the molecular weight (a) and the hydrodynamic radius R_H (b) of complexes of the oligophosphate (OPP) and four graft copolymers (GPLLi, i = 0–3) on the mixing ratio X.