Photoluminescence of Ce, Pr and Tb activated Sr3Ln(PO4)3 under VUV-UV excitation

The spectroscopic properties in VUV-Vis range for the eulytite structural phosphors Sr₃Gd(PO₄)₃:Ln³⁺ (Ln³⁺=Ce³⁺, Pr³⁺, Tb³⁺), Sr₃Ce(PO₄)₃, Sr₃Gd(PO₄)₃ and Sr₃Tb(PO₄)₃ were investigated. The bands near 170 nm in VUV excitation spectra are assumed to connect with the host lattices related absorption. The f-d transitions of Ce³⁺, Pr³⁺ and Tb³⁺ in the host lattices are assigned and corroborated. A convenient experiment formulation on the relationship between the lowest f-d transition energies and n value for trivalent 4fⁿ-series rare earth ions in these host lattices is applied.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

Photoluminescence properties of La(PO3)3:Tb under VUV excitation

La_1−x(PO₃)₃:Tb_x³⁺ (0<x0.6) were prepared using solid-state reaction. The vacuum ultraviolet (VUV) excitation spectrum of La_0.55(PO₃)₃:Tb_0.45³⁺ indicates that the absorption of (PO₃)₃³⁻ groups locates at about 163 and 174 nm and the absorption bands of (PO₃)₃³⁻ groups (174 nm) and La³⁺–O²⁻ (200 nm) and Tb³⁺ (213 nm) overlap each other. These results imply that the (PO₃)₃³⁻ groups can efficiently absorb the excited energy around 172 nm and transfer the energy to Tb³⁺. Under 172 nm excitation, the optimal photoluminescence (PL) intensity is obtained when Tb concentration reaches 0.45 and is about 71% of commercial phosphor Zn_1.96SiO₄:0.04 Mn²⁺ with chromaticity coordinates of (0.343, 0.578) and the decay time of about 4.47 ms.     

The luminescence of Pr3+ in BaY4Si5O17

The cell constants of four new monoclinic compounds BaR₄X₅O₁₇ (R = Y, Gd; X = Si, Ge) are given. The luminescence of various RE activators in the silicates is reported. Pr³⁺-activated BaY₄Si₅O₁₇ shows efficient ultraviolet 5d → 4f emission and weak 4f → 4f emission (mainly red luminescence from the ¹D₂ level). The 5d → 4f emission is ascribed to Pr³⁺ on Y sites, the 4f → 4f emission to Pr³⁺ on Ba sites. Energy transfer from Pr³⁺ to Gd³⁺ has been observed. Gd³⁺ plays an intermediate role in the energy transfer from Pr³⁺ to Sm³⁺ and to Dy³⁺ in BaGd₄Si₅O₁₇. Upon activation with Tb³⁺ the silicates show characteristic green Tb³⁺ luminescence with a quantum efficiency of 75% for ultraviolet excitation.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

A novel Sr3Y(PO4)3-based white light-emitting phosphor

The Sr₃Y(PO₄)₃:0.05Sm³⁺, Sr₃Y(PO₄)₃:0.005Tb³⁺, and Sr₃Y(PO₄)₃:0.005Tb³⁺, 0.05Sm³⁺ phosphors were synthesized using a conventional solid-state reaction technique at high temperature and their photoluminescence properties under ultraviolet (UV) excitation were studied. We observed the UV sensitization of Sm³⁺ emission (565, 600, and 648 nm) by Tb³⁺ in Sr₃Y(PO₄)₃:0.005Tb³⁺, 0.05Sm³⁺, that leads to a white light emission with the CIE coordinate (0.367, 0.312) of Sr₃Y(PO₄)₃:0.005Tb³⁺, 0.05Sm³⁺ phosphor under UV excitation. The emission is a result of partial energy transfer from Tb³⁺ to Sm³⁺, which is discussed in detail in terms of the corresponding excitation and emission spectra.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca_0.8-2x(Yb_xTb_0.1Na_0.1+x)_2xWO₄(x=0~0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO₄^2-基团到Yb³⁺离子和WO₄^2-基团到Tb³⁺离子再到Yb³⁺离子,Yb³⁺离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细得研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光到2个1000nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

UV-VUV-excited photoluminescence of RE-activated CaLaP3O10 (RE=Eu,Tb)

Monazite-type polyphosphate CaLaP₃O₁₀ was synthesized by solid-state reaction at 1000 °C and their photoluminescence of Eu³⁺ and Tb³⁺ in CaLaP₃O₁₀ under ultraviolet (UV) and vacuum-ultraviolet (VUV) excitation were evaluated for the first time. The emission spectra of CaLaP₃O₁₀:Eu³⁺showed that Eu³⁺ are in a site with inversion symmetry because the magnetic dipole transition ⁵D₀-⁷F₁ was the strongest both upon 254 and 147 nm excitation. Monitored at 621 nm the excitation spectra consisted of host absorption bands, charge transfer band of Eu-O and the intraconfiguration 4f⁶ transition of Eu³⁺. Green phosphor CaLaP₃O₁₀:Tb³⁺exhibited better color purity when excited by 147 nm than that excited by 254 nm. With monitored at 542 nm the host absorption bands of CaLaP₃O₁₀:Tb³⁺ were also observed. Besides the host absorption bands there were strong f-d and weak f-f transitions of Tb³⁺.     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Hydrothermal synthesis and luminescent properties of LuBO3:Tb microflowers

Hexagonal vaterite-type LuBO₃:Tb³⁺ microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 °C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f⁸→4f⁷5d transition of Tb³⁺ at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO₃:Tb³⁺ samples show the characteristic green emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions with the ⁵D₄→⁷F₅ transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays.     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

Homogeneous one-dimensional structured Tb(OH)3:Eu nanorods: Hydrothermal synthesis, energy transfer, and tunable luminescence properties

Nearly monodisperse, homogeneous and well-defined one-dimensional Tb_(1−x)(OH)₃:xEu³⁺ (x=0-3 mol%) nanorods have been prepared through hydrothermal method. The size of the Tb(OH)₃:Eu³⁺ rods could be modulated from nano- to micro-scale by using different amount of ammonia solution. They present highly crystallinity in spite of the moderate reaction temperature. Under ultraviolet excitation into the f→f transition of Tb³⁺ at 382 nm, Tb(OH)₃ samples show the characteristic emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions; whereas Tb(OH)₃:Eu³⁺ samples mainly exhibit the characteristic emission of Eu³⁺ corresponding to ⁵D₀→⁷F_{1, 2, 4} transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺. The increase of Eu³⁺ concentration leads to the increase of the energy transfer efficiency from Tb³⁺ to Eu³⁺. The PL colors of Tb(OH)₃:xEu³⁺ phosphors can be easily tuned from green, yellow, orange, to red by changing the doping concentration (x) of Eu³⁺.     

Sensitization of Tb3+ luminescence with Ce3+ in LaOBr: Tb3+, Ce3+

Luminescence emission and uv-excitation properties of LaOBr: Tb³⁺, LaOBr: Ce³⁺, and LaOBr: Tb³⁺, Ce³⁺ phosphors were studied. The visible emission spectra of La_0.995Tb_0.005OBr consists of⁵D_3,4 →⁷F_3–6 transitions in the wavelength range of 410–630 nm. The excitation of the Tb³⁺ ion gives a broad 4f → 5d transition band at 254 nm and weaker4f → 4f transition lines above 300 nm. The uv-excitation and emission of La_0.995Ce_0.005OBr at 290, 315, 355 (excitation), and 440 nm (emission) originate from transitions between the 4f-ground state and the four crystal field components of the5d²D excited state. The sensitization of Tb³⁺ luminescence in LaOBr with Ce³⁺ at varying concentrations is described and discussed. With increasing Ce³⁺ concentration the ⁵D₃ →⁷F transitions of Tb³⁺ quench totally and the⁵D₄ →⁷F transitions begin to quench gradually. The excitation spectrum of the⁵D₄ →⁷F₅ transition of Tb³⁺ consists of four bands due to Tb³⁺ and Ce³⁺, of which the three Ce³⁺ bands increase in intensity and the Tb³⁺ band decreases as the Ce³⁺ concentration is increased.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Matrix-Inducing Synthesis of SrxY10?x(SiO4)y(PO4)6?yO2: Eu3+ Micron Crystalline Coral Like Phosphors by Sol-Gel Composition of Hybrid Precursors

In the context, Sr_xY_10−x(SiO₄)_y(PO₄)_6−yO₂ doped with 1 mol%Eu³⁺ (x = 2, y = 6; x = 4, y = 4; x = 5, y = 3; x = 8, y = 0) were synthesized by using 3-aminopropyl-triethoxysilane (APES) as the sources of the silicate network. X-ray diagrams confirm that Sr_xY_10−x(SiO₄) _y(PO₄)_6−yO₂: Eu³⁺ solid solutions are formed as a pure apatitic phase. The SEM picture shows that there exist some novel unexpected coral like morphological structures. The luminescent intensity is the strongest for the host composition of Sr₄Y₆(SiO₄)₄(PO₄)₂O₂ although the effect of the composition on the luminescent intensity is little.     

Sr7Zr(PO4)6∶xEu2+蓝色荧光粉的合成及其发光特性

通过高温固相反应合成了新型的蓝色荧光粉Sr₇Zr(PO₄)₆∶xEu²⁺。通过X射线粉末衍射(XRD)、紫外可见(UV-Vis)吸收光谱、荧光光谱研究了Sr₇Zr(PO₄)₆∶xEu²⁺材料的相纯度及荧光性质。结果表明,Eu²⁺掺杂获得的Sr₇Zr(PO₄)₆∶xEu²⁺荧光粉为纯相,且200~400 nm范围内的近紫外(NUV)光均能对其进行有效的激发。在315 nm的激发下,Sr₇Zr(PO₄)₆∶xEu²⁺荧光粉发射出峰值位于415 nm左右的蓝光,且Eu²⁺在Sr₇Zr (PO₄)₆基质中的最佳掺杂浓度为0.05,相应的CIE色度坐标为(0.164,0.021),比商用BaMgAl₁₀O₁₇∶Eu²⁺(BAM)蓝色荧光粉具有更高的色纯度。     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Vacuum ultraviolet and near-infrared excited luminescence properties of Ca3(PO4)2:RE, Na (RE=Tb, Yb, Er, Tm, and Ho)

Tb³⁺, Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped Ca₃(PO₄)₂ were synthesized by solid-state reaction, and their luminescence properties were studied by spectra techniques. Tb³⁺-doped samples can exhibit intense green emission under VUV excitation, and the brightness for the optimal Tb³⁺ content is comparable with that of the commercial Zn₂SiO₄:Mn²⁺ green phosphor. Under near-infrared laser excitation, the upconversion luminescence spectra of Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped samples demonstrate that the red, green, and blue tricolored fluorescence could be obtained by codoping Yb³⁺-Ho³⁺, Yb³⁺-Er³⁺, and Yb³⁺-Tm³⁺ in Ca₃(PO₄)₂, respectively. Good white upconversion emission with CIE chromaticity coordinates (0.358, 0.362) is achieved by quadri-doping Yb³⁺-Tm³⁺-Er³⁺-Ho³⁺ in Ca₃(PO₄)₂, in which the cross-relaxation process between Er³⁺ and Tm³⁺, producing the ¹D₂-³F₄ transition of Tm³⁺, is found. The upconversion mechanisms are elucidated through the laser power dependence of the upconverted emissions and the energy level diagrams.