采用燃烧技术制备CuO纳米粒子:一种高效且环境友好的用于芳族醛合成芳族腈催化剂(英文)

CuO nanoparticles were synthesized using an energy-efficient and rapid solution combustion technique with malic acid employed as a fuel. The combustion-derived CuO nanoparticles were used as catalysts in a one-pot synthesis of aromatic nitriles from aromatic aldehydes and hydroxylamine hydrochloride. The catalyst was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, and Brunauer-Emmett-Teller surface area analysis. The catalytic activity of the CuO nanoparticles in the synthesis of aromatic nitriles from aromatic aldehydes was evaluated. The present protocol offers the advantages of a clean reaction, simple methodology, short reaction duration (1-2 min), and high yield (85%-98%). The catalytic activity of the CuO nanoparticles was found to be higher than that of bulk CuO powder under the same conditions. The catalyst can also be recovered and reused up to four times with no significant loss of catalytic activity. The present approach is inexpensive and is a convenient technique suitable for industrial production of CuO nanoparticles and nitriles.     

超声辅助法合成的石墨烯-TiO2复合材料声催化降解罗丹明B（英文）

A series of graphene-TiO2 composites was fabricated from graphene oxide and titanium n-butoxide(TNB) by an ultrasonic-assisted method.The structure and composition of the nanocomposites were characterized by Raman spectroscopy,BET surface area measurements,X-ray diffraction,transmission electron microscopy,and ultraviolet-visible absorption spectroscopy.The average size of the TiO2 nanoparticles on the graphene nanosheets was controlled at around 10-15 nm without using surfactant,which is attributed to the pyrolysis and condensation of dissolved TNB into TiO2 by ultrasonic irradiation.The catalytic activity of the composites under ultrasonic irradiation was determined using a rhodamine B(RhB) solution.The graphene-TiO2 composites possessed a high specific surface area,which increased the decolorization rate for RhB solution.This is because the graphene and TiO2 nanoparticles in the composites interact strongly,which enhances the photoelectric conversion of TiO2 by reducing the recombination of photogenerated electron-hole pairs.     

Triton X-100辅助合成多级孔道结构ZSM-5沸石催化剂(英文)

ZSM-5 zeolite with a hexagonal cubic morphology was synthesized by a hydrothermal method using Triton X-100, a nonionic surfactant. The samples prepared with and without the surfactant were characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy, N2 adsorption, high resolution transmission electron microscopy(TEM), high resolution scanning electron mi-croscopy, energy dispersive X-ray analysis, and NH3 temperature-programmed desorption. The XRD patterns confirmed the formation of a pure ZSM-5 crystalline phase without secondary phases. TEM images revealed that the hexagonal cubes were made of peanut-shaped nanoparticles with voids.The catalytic activity of the zeolite samples was evaluated using the selective oxidation of benzyl alcohol with tertiary-butyl hydrogen peroxide as the oxidant at 90 °C. The surfactant-assisted prep-aration yielded a zeolite that gave a higher conversion than the one prepared in the absence of the surfactant. The catalyst was retrieved and reused four times without significant loss in activity and selectivity.     

Triton X-100辅助合成多级孔道结构ZSM-5沸石催化剂(英文)

ZSM-5 zeolite with a hexagonal cubic morphology was synthesized by a hydrothermal method using Triton X-100, a nonionic surfactant. The samples prepared with and without the surfactant were characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy, N2 adsorption, high resolution transmission electron microscopy(TEM), high resolution scanning electron mi-croscopy, energy dispersive X-ray analysis, and NH3 temperature-programmed desorption. The XRD patterns confirmed the formation of a pure ZSM-5 crystalline phase without secondary phases. TEM images revealed that the hexagonal cubes were made of peanut-shaped nanoparticles with voids.The catalytic activity of the zeolite samples was evaluated using the selective oxidation of benzyl alcohol with tertiary-butyl hydrogen peroxide as the oxidant at 90 °C. The surfactant-assisted prep-aration yielded a zeolite that gave a higher conversion than the one prepared in the absence of the surfactant. The catalyst was retrieved and reused four times without significant loss in activity and selectivity.     

镧-镍复合氧化物纳米微粒的固相合成及其催化性能

The La-Ni complex oxide catalyst was prepared by solid state reactions under microwave. The structure and reducibility of the catalyst were characterized by using TG-DTA, XRD, TEM and TPR methods. At the same time the catalytic activity of oxidative dehydrogenation of ethylbenzene to styrene with carbon dioxide over the complex oxide nanoparticle was investigated.The Results show that the product is K2NiF4 nanoparticles,and the size is 13nm.The complex oxide sample had high activity for the oxidative dehydrogenation of ethylbenzene to styrene.     

MgO纳米晶负载镍催化剂用于甲烷蒸汽重整反应(英文)

Nanocrystalline MgO with a relatively high surface area and mesoporous structure was synthesized by a surfactant assisted precipitation method for use as the support of nickel catalysts for steam reforming of methane. The samples were characterized by X‐ray diffraction, N2 adsorption, temperature‐programmed reduction, temperature‐programmed oxidation, scanning electron microscopy, and transmission electron microscopy. The catalysts showed high catalytic activity and good stability in the steam reforming of methane. Increasing the nickel loading up to 10 wt% gave increased activity. Catalysts with higher nickel loadings showed more deposited carbon after reaction. The excellent anti‐coking performance of the catalysts was attributed to the formation of a nickel‐magnesia solid solution, basicity of the support surface, and nickel‐support interaction.     

紫外光照射下 Fe-碳纳米管/TiO2 复合材料降解罗丹明 B

 The composites comprising Fe-carbon nanotubes (CNTs) on TiO2 were prepared by a modified sol-gel method and characterized by nitrogen adsorption, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive X-ray analysis. The photocatalytic decomposition of rhodamine B (Rh.B) under UV irradiation and air aeration catalyzed by the composites was measured. The photocatalytic activity of TiO2 nanoparticles was significantly enhanced by the large CNT network that facilitated electron transfer between adsorbed Rh.B molecules and the catalyst substrate and the simultaneous occurrence of the photo-Fenton reaction in the presence of Fe particles. A marked acceleration of the decomposition rate was observed with aeration by flowing air aeration due to the formation of the circulatory photo-Fenton system. Chemical oxygen demand of piggery waste was measured at regular intervals to evaluate the mineralization of wastewater.     

γ-Al2O3负载的金溶胶的尺寸效应对CO催化氧化活性的影响

The relationship between particle size and catalytic activity of gold nanoparticle catalysts with γ-Al2O3 as support has been investigated. The catalysts were prepared via the gold sol with different particle sizes by micelle method, and their structures were characterized by HRTEM and XRD, respectively. Furthermore, the catalytic activities were tested by CO oxidation. Experimental results showed that the catalytic activity became much weaker when gold particles were increased from 3.2 to 6.6 nm. Additionally, the particle size was also a key factor to govern catalytic activity with regard to gold supported on TiO2 prepared by the methods of deposition-precipitation.     

Effect of Preparation Methods of Bi2O3 Nanoparticles on their Photocatalytic Activity

Bi2O3 nanoparticles were prepared by means of ammonia precipitation, polyol mediated methods and microemulsion chemical method. The structure and properties of the as-prepared nanoparticles, having been submitted to a heat-treatment test at 750℃, were characterized by means of XRD. BET, XPS and UV-Vis absorption techniques. The photocatalytic oxidation reactions of benzene, toluene and xylene were used as the model reaction to measure the photocatalytic activity of Bi2O3 nanoparticles, respectively. The results show that the crystallite size of Bi2O3 prepared with different methods and calcined at 750℃ were 50. 6, 38.5 and 31.5 nm, respectively. The photocatalytic activity of Bi2O3 nanoparticles prepared with the microemulsion chemical method was higher than that of the particles prepared with the polyol mediated method; and that of the particles prepared with the micromulsion chemical method was the highest among the three. The degradation rates of the three pollutants xylene, toluene and benzene decreased in sequence.     

Selective oxidation of sulfurs and oxidation desulfurization of model oil by 12-tungstophosphoric acid on cobalt-ferrite nanoparticles as magnetically recoverable catalyst

Silica-coated CoFe2O4 nanoparticles were prepared and used as a support for the immobilization of 12-tungstophosphoric acid, to produce a new magnetically separable catalyst. This catalyst was characterized using X-ray diffraction, wavelength-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, laser par-ticle size analysis, and vibrating sample magnetometry. The catalyst showed high activity in the selective oxidation of thioethers and thiophenes to the corresponding sulfones under mild condi-tions. The catalytic activity of the nanocatalyst in the oxidative desulfurization of model oil was investigated. The effect of nitrogen-containing compounds on sulfur removal from the model oil was also evaluated. The catalyst showed high activity in the oxidative desulfurization of diesel. The cata-lyst can be readily isolated from the oxidation system using an external magnet and no obvious loss of activity was observed when the catalyst was reused in four consecutive runs.     

树枝状钯纳米结构的控制合成及硝基苯加氢反应的催化活性

以氯钯酸为前驱体, 苯甲醇为还原剂和溶剂, 十六烷基吡咯烷酮(PVP)为稳定剂, 在微波辐射下制备了分散均匀、形貌均一的树枝状钯纳米结构. 产物用透射电子显微镜(TEM), X射线粉末衍射(XRD), X射线光电子能谱(XPS)进行了表征, 表明所制备的Pd纳米颗粒呈树枝状, 形貌单一, 分散均匀, 是由许多近似圆形的小颗粒自组装而成的二级结构. 对树枝状钯催化硝基苯加氢反应进行探究, 表明树枝状钯的催化活性比市售的钯碳催化剂的催化活性高.     

Synthesis and characterization of nickel sulfide nanoparticles via cyclic microwave radiation

In current study, nanoparticles of NiS were synthesized by applying microwave radiation. The effect of concentration of sulfur source, reaction time, and power of microwave irradiation on the treatment process was investigated. The morphology, structure, and composition of the as-synthesized nanostructures have been confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Optical properties of as-prepared sample were investigated by photoluminescence spectroscopy; the emission peak is at 555.04 nm and shows the blue shift.     

有序介孔碳CMK-3微波负载NiO及其电容性能研究

微波法负载具有简便、快速、均匀的优点. 本文尝试以乙二醇为还原剂, Ni(Ac)₂为Ni源, 通过微波辐射负载及低温空气煅烧在CMK-3上形成NiO. 对样品进行X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸脱附等结构表征及循环伏安(CV)等电化学性能测试. 结果显示, 微波法并经低温空气煅烧后有序介孔碳CMK-3的小角XRD峰强度变弱、比表面积下降、孔容减小, 但却使其比电容从229.3 F/g提高到295.9 F/g, 大于文献报导中介孔碳负载MnO₂, RuO₂•xH₂O后的比电容值. 由此说明微波法是有效的负载方法, 具有较好的应用前景.     

新型双链表面活性剂DDOBA的合成与高单分散性憎水纳米金的制备

自行设计合成了新颖的苄胺型双链表面活性剂3,4-双十二烷氧基苄胺(DDOBA). 利用DDOBA/正丁醇/正庚烷/甲酸/HAuCl₄·4H₂O自发形成的水/油(W/O)型微乳液作为微反应器, 通过微波辐射下的甲酸还原法成功制备了DDOBA保护的憎水性金纳米粒子, 并通过紫外-可见(UV-Vis)光谱、透射电镜(TEM)、高分辨透射电镜(HR-TEM)和X射线衍射(XRD)等方法进行了表征和分析. 结果显示, DDOBA既可参与形成稳定的W/O型(油包水型)微乳液, 又可作为金纳米粒子的良好保护剂. 在合适的微乳液体系组成范围内, 用本实验方法可以获得高单分散性的憎水性金纳米粒子, 并能在空气/水界面上自动形成大面积短程有序的纳米金二维自组装膜.     

Preparation of Ni/TiO2 Nanoparticles and Their Catalytic Performance on the Thermal Decomposition of Ammonium Perchlorate

Metal/oxide nanoparticles are attractive because of their special structure and better properties. The Ni/TiO₂ nanoparticles were prepared by a liquid phase chemical reduction method in this paper. The obtained‐products were characterized by inductively coupled plasma (ICP), X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). The results show that Ni particles in Ni/TiO₂ nanoparticles exhibit better dispersion and the size of most Ni particles is 10 nm or so. The catalytic activity of Ni/TiO₂ nanoparticles on the thermal decomposition of ammonium perchlorate (AP) was investigated by simultaneous thermogravimetry and differential thermal analysis (TG‐DTA). Results show that composite process of Ni and TiO₂ can improve the catalytic activity of Ni nanoparticles on the thermal decomposition of AP, which is mainly attributed to the improvement of Ni dispersion in Ni/TiO₂ nanoparticles. The catalytic activity of Ni/TiO₂ nanoparticles increases with increasing the weight ratio of Ni to AP.     

Catalytic functions of Mo/Ni/MgO in the synthesis of thin carbon nanotubes

The functions and structures of Mo/Ni/MgO catalysts in the synthesis of carbon nanotubes (CNTs) have been investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Thin 2-5-walled CNTs with high purities (over 90%) have been successfully synthesized by catalytic decomposition of CH(4) over Mo/Ni/MgO catalysts at 1073 K. It has been found that the yield of CNTs as well as the outer diameter or thickness correlates well with the contents of these three elements. The three components Mo, Ni, and MgO are all necessary to synthesize the thin CNTs at high yields since no catalytic activity was observed for CNT synthesis when one of these components was not present. The outer diameter of the CNTs increases from 4 to 13 nm and the thickness of graphene layers also increases with increasing Mo content at a fixed Ni content, while the inner diameter stays at 2-3 nm regardless of their contents. Furthermore, the average outer diameter is in good agreement with the average particle size of metal catalyst. That is, the thickness or the outer diameter can be controlled by selecting the composition of the Mo/Ni/MgO catalysts. XRD analyses have shown that Mo and Ni form a Mo-Ni alloy before CNT synthesis, while the Mo-Ni alloy phase is separated into Mo carbide and Ni. These alloy particles are supported on MgO cubic particles 15-20 nm in width. It has been found that only small Mo-Ni alloy particles 2-16 nm in size catalyze CNT synthesis, with larger particles over 15 nm exhibiting no activity. Mo carbide and Ni should play different roles in the synthesis of the thin CNTs, in which Ni is responsible for the dissociation of CH(4) into carbon and Mo(2)C works as a carbon reservoir.     

MgO在NaY沸石上的分散及其催化性能

采用微波辐射方法将ＭｇＯ直接分解在ＮａＹ沸石上,从而获得强碱性活性位。ＭｇＯ／ＮａＹ具有耐水冲刷性,克服了通常负载型固体碱在水中易流失的弱点,并在２７３Ｋ的顺式－２－丁烯异构化反应中具有催化活性。     

Synthesis and characterization of ultrahigh crystalline TiO2 nanotubes

Ultrahigh crystalline TiO2 nanotubes were synthesized by hydrogen peroxide treatment of very low crystalline titania nanotubes (TiNT-as prepared), which were prepared with synthesized TiO2 nanoparticles by hydrothermal methods in an aqueous NaOH solution. Thus, prepared ultrahigh crystalline TiO2 nanotubes (TiNT-H2O2) showed comparable crystallinity with high crystalline TiO2 nanoparticles. The details of nanotubular structures were elucidated by high resolution-transmission electron microscopy (HR-TEM), field emission-scanning electron microscopy (FE-SEM), energy-dispersive X-ray analysis in transmission electron microscopy (TEM-EDX), X-ray diffraction (XRD), photoluminescence (PL), and BET surface area. TiNT-H2O2 was found to be a multiwalled anatase phase only with an average outer diameter of approximately 8 nm and an inner diameter of approximately 5 nm and grown along the [001] direction to 500-700 nm long with an interlayer fringe distance of ca. 0.78 nm. The photocatalytic activity of TiNT-H2O2 was about 2-fold higher than those of TiNT-as prepared, synthesized TiO2 nanoparticles, and TiO2-P25 (Degussa) in the photocatalytic oxidation of trimethylamine gas under UV irradiation.     

Green Synthesis of Ag Nanoparticles by Callicarpa Maingayi: Characterization and Its Application with Graphene Oxide for Enzymeless Hydrogen Peroxide Detection

A facile green synthesis of silver nanoparticles (AgNPs) was achieved using aqueous leaf extract of Callicarpa Maingayi as a reducing and stabilizing agent during the synthesis from its salt solutions. The synthesized silver nanoparticles were analyzed with transmission electron microscopy (TEM), X‐ray diffraction (XRD) and energy dispersive spectrometer (EDS). XRD study shows that the particles are crystalline in nature with face centered cubic geometry. The crystallite size obtained from XRD is about 15 nm which is in agreement well with the TEM results. A new nanostructure sensor was constructed by immobilizing silver nanoparticles and graphene oxide (AgNPs‐GO) composite film on a glassy carbon electrode (AgNPs‐GO/GCE). It was found that the AgNPs‐GO composite exhibits good catalytic activity toward the reduction of hydrogen peroxide (H₂O₂), leading to an enzymeless sensor with a fast amperometric response time of less than 5 s, high selectivity, good reproducibility and stability. The linear range was 5.0 μM to 700 μM with a detection limit of 0.6 μM (S/N = 3).     

Flash microwave synthesis of trevorite nanoparticles

Nickel ferrite nanoparticles have several possible applications as cathode materials for rechargeable batteries, named “lithium-ion” batteries. In this study, NiFe₂O₄ was prepared by microwave induced thermohydrolysis. The obtained nanoparticles were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), BET method, transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). All the results show that the microwave one-step flash synthesis leads in a very short time to NiFe₂O₄ nanoparticles with elementary particles size close to 4-5 nm, and high specific surfaces (close to 240 m²/g). Thus, microwave heating appears as an efficient source of energy to produce quickly nanoparticles with complex composition as ferrite.