Sum frequency generation study of the room-temperature ionic liquids/quartz interface

The purpose of this investigation is to study the ionic liquid/quartz interface with sum frequency generation vibrational spectroscopy (SFG). SFG spectroscopy was chosen for this study because of its unique ability to yield vibrational spectra of molecules at an interface. Different polarization combinations are used, which probe different susceptibilities, giving SFG the ability to determine molecular orientation at the interface. The ionic liquids used were 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF(4)], and 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF(6)]. To determine the influence of the molecular structure and charge on orientation at the interface, neutral, 1-methylimidazole, and 1-butylimidazole were also studied. Raman spectra and depolarization ratios were obtained for neat samples of 1-methylimidazole, 1-butylimidazole, and 1-butyl-3-methylimidazolium tetrafluoroborate recorded from 2700 to 3300 cm(-1). SFG spectra of the 1-methylimidazole/quartz interface showed both methyl and aromatic C-H vibrations. Orientation calculations determined that the ring of the molecule is tilted 45-68 degrees from normal, with the methyl group oriented 32-35 degrees from normal. The SFG spectra of 1-butylimidazole contain several resonances from the alkyl chain with only one weak resonance from the aromatic ring. Orientation calculations suggest that the ring is lying in the plane of the surface with the methyl group pointing 43-47 degrees from normal. The orientation of the [BMIM][PF(6)] ionic liquid was sensitive to trace amounts of water and had to be evacuated to <3 x 10(-5) Torr for the water to be removed. SFG spectra of both ionic liquids were similar, displaying resonances from the alkyl chain as well as the aromatic ring. Orientation analysis suggests the aromatic ring was tilted 45-90 degrees from normal for [BMIM][BF(4)], while the ring for [BMIM][PF(6)] was tilted 38-58 degrees from normal. This suggests the orientation of the molecule is influenced by the size of the anion.     

Absolute orientation of molecules at interfaces

A method to determine the absolute orientation of molecules at liquid interfaces by sum frequency generation (SFG) is reported. It is based on measurements of the orientations of two nonparallel vibrationally active chromophores in the molecule of interest combined with a rotation matrix formulation to obtain the absolute molecular orientation. We chose m-tolunitrile, a planar molecule adsorbed to the air/water interface, as a proof-of-method experiment. Quantitative analysis of different polarization sum frequency intensities facilitate unique peak assignments of the methyl and nitrile groups of m-tolunitrile. The SFG analysis of the measurement yields a nitrile group tilting at 53 degrees to the surface normal, and the C3 axis of the methyl group is almost upright at 23 degrees with respect to the surface normal. Using a rotation matrix formulation, we found that the angle between the surface plane and the m-tolunitrile molecular plane is 70 degrees.     

Structure and vibrational spectroscopy of salt water/air interfaces: predictions from classical molecular dynamics simulations

We report the sum frequency generation (SFG) spectra of aqueous sodium iodide interfaces computed with the methodology outlined by Morita and Hynes (J. Phys. Chem. B 2002, 106, 673), which is based on molecular dynamics simulations. The calculated spectra are in qualitative agreement with experiment. Our simulations show that the addition of sodium iodide to water leads to an increase in SFG intensity in the region of 3400 cm(-1), which is correlated with an increase in ordering of hydrogen-bonded water molecules. Depth-resolved orientational distribution functions suggest that the ion double layer orders water molecules that are approximately one water layer below the Gibbs dividing surface. We attribute the increase in SFG intensity to these ordered subsurface water molecules that are present in the aqueous sodium iodide/air interfaces but are absent in the neat water/air interface.     

和频振动光谱(SFG-VS)研究超铺展三甲基硅烷表面活性剂在空气/水界面的振动光谱和吸附

The C-H stretch vibrational spectra of the trisiloxane superspreading surfactant Silwet L-77((CH3)3Si-O-Si(CH3)(C3H6)(OCH2CH2)7-8OCH3)-O-Si(CH3)3) at the air/water interface are measured with the surface Sum Frequency Generation Vibrational Spectroscopy (SFG-VS). The spectra are dominated with the features from the –Si-CH3 groups around 2905 cm-1 (symmetric stretch or SS mode) and 2957 cm-1 (mostly the asymmetric stretch or AS mode), and with the weak but apparent contribution from the -O-CH2- groups around 2880 cm-1 (symmetric stretch or SS mode). Comparison of the polarization dependent SFG spectra below and above the critical aggregate or micelle concentration (CAC) indicates that the molecular orientation of the C¡H related molecular groups remained unchanged at different surface densities of the Silwet L-77 surfactant. The SFG-VS adsorption isotherm suggested that there was no sign of Silwet L-77 bilayer structure formation at the air/water interface. The Gibbs adsorption free energy of the Silwet surfactant to the air/water interface is -42.2±0.8kJ/mol, indicating the unusually strong adsorption ability of the Silwet L-77 superspreading surfactant     

Adsorption of sodium dodecyl sulfate at the hydrophobic solid/aqueous solution interface in the presence of poly(ethylene glycol): dependence upon polymer molecular weight

The polar orientation and degree of conformational order of sodium dodecyl sulfate (SDS) adsorbed at the hydrophobic octadecanethiol/aqueous solution interface in the presence of poly(ethylene glycol) (PEG) has been investigated as a function of the surfactant concentration and the molecular weight of the polymer. Sum frequency generation (SFG) vibrational spectroscopy was employed to obtain spectra of interfacial surfactant; weak SFG signals from interfacial polymer were also detected for polymer molecular weights of 900 and above. The phase of the SFG spectra indicated that both the surfactant and polymer had a net orientation of their CH2 and/or CH3 groups toward the hydrophobic surface. Spectra of SDS in the presence of mixed polymer/surfactant solutions showed increasing conformational order as the surfactant concentration was raised. At the lowest surfactant concentrations, the spectra of SDS were weaker in the presence of the polymer than in its absence. All PEG molecular weights investigated, with the exception of PEG 400, gave rise to significant inhibition of ordered surfactant adsorption below the critical micelle concentration. The greatest inhibitory effect was noted for PEG 900. Probing interfacial PEG specifically through the use of perdeuterated SDS revealed that the polymer spectral intensity decreased monotonically as the surfactant concentration was increased for all polymer molecular weights where a PEG spectrum was apparent. These findings are interpreted in terms of the displacement of preadsorbed polymer as the surfactant concentration increases. This result is compatible with observations of adsorption from SDS/PEG solutions at solid/solution and solution/air interfaces made using other techniques.     

Vibrational sum-frequency generation at protein modified air–water interfaces: Effects of molecular structure and surface charging

Protein and surfactant modified air–water interfaces are an important model system for colloid science as many applications for example aqueous foams in food products rely on our knowledge and ability to tune molecular structures at these interfaces. That is because interfaces are a fundamental building block in the hierarchical structure of foam, where in fact the molecular level can determine properties on larger length scales. For that reason it is of great importance to increase our ability to study air–water interfaces with molecular level probes and to obtain not only information on coverage but also direct information on interfacial composition, molecular order, orientations as well as information on the charged state of an interface. Vibrational sum-frequency generation (SFG) is a powerful tool that can help to address these issues and is inherently surface sensitive. In this contribution we will review recent developments in the use of SFG for studies of biomolecules at aqueous interfaces and discuss current issues with the interpretation of SFG spectra from electrified interfaces. In order to guide interpretations from interface spectroscopy we invoke the use of complementary methods such as ellipsometry and zetapotential measurements of bulk molecules.     

Cd2+-induced interfacial structural changes of Langmuir-Blodgett films of stearic acid on solid substrates: a sum frequency generation study

The molecular structures and their stabilities at the outmost-layer of the Langmuir-Blodgett (LB) films of stearic acid on solid substrates have been investigated by a highly surface-sensitive spectroscopic technique, sum frequency generation (SFG), in air and in aqueous solution, using the combination of both normal and deuterated stearic acid. Peaks observed in the SFG spectra are mainly attributed to the terminal methyl group at the outmost layer of the LB films. The SFG spectra in air are virtually identical and are independent of the odd-even property and thickness (1-12) of the LB films, indicating that the even-numbered LB film changes its surface structure after passing through the interface between the water subphase and air, especially when the Cd2+ cation was included in the water subphase. Furthermore, we have demonstrated for the first time using in situ SFG measurement that the interfacial molecular structure at the LB bilayer of stearic acid on the hydrophilic substrates significantly change with immersion in the water subphase containing Cd2+ cation while such a structural change has not been observed in the water subphase without Cd2+. These results clearly indicate that a reorganization process takes place on the surface of the stearic acid bilayer induced by the Cd2+ cation. The electrostatic interaction between the carboxylate headgroup of stearic acid via the Cd2+ cation seems to play an important role in the surface reorganization process both in air and in solution.     

Adsorption of 1- and 2-butylimidazoles at the copper/air and steel/air interfaces studied by sum frequency generation vibrational spectroscopy

The structure of thin films of 1- and 2-butylimidazoles adsorbed on copper and steel surfaces under air was examined using sum frequency generation (SFG) vibrational spectroscopy in the ppp and ssp polarizations. Additionally, the SFG spectra of both isomers were recorded at 55 °C at the liquid imidazole/air interface for reference. Complementary bulk infrared, reflection-absorption infrared spectroscopy (RAIRS), and Raman spectra of both imidazoles were recorded for assignment purposes. The SFG spectra in the C-H stretching region at the liquid/air interface are dominated by resonances from the methyl end group of the butyl side chain of the imidazoles, indicating that they are aligned parallel or closely parallel to the surface normal. These are also the most prominent features in the SFG spectra on copper and steel. In addition, both the ppp and ssp spectra on copper show resonances from the C-H stretching modes of the imidazole ring for both isomers. The ring C-H resonances are completely absent from the spectra on steel and at the liquid/air interface. The relative intensities of the SFG spectra can be interpreted as showing that, on copper, under air, both butylimidazoles are adsorbed with their butyl side chains perpendicular to the interface and with the ring significantly inclined away from the surface plane and toward the surface normal. The SFG spectra of both imidazoles on steel indicate an orientation where the imidazole rings are parallel or nearly parallel to the surface. The weak C-H resonances from the ring at the liquid/air interface suggest that the tilt angle of the ring from the surface normal at this interface is significantly greater than it is on copper.     

Sum frequency generation spectroscopic studies on phase transitions of phospholipid monolayers containing poly(ethylene oxide) lipids at the air-water interface

Vibrational sum frequency generation (SFG) spectroscopy was applied to study the phase transitions of the mixed monolayers of l-alpha-distearoyl phosphatidylethanolamine (DSPE) and DSPE covalently coupled with poly(ethylene oxide) at the amino head group (DSPE-EO(45), DSPE with 45 ethylene oxide monomers) at the air-water interface. The SFG spectra were measured for the mixed monolayers with the mole fractions of DSPE-EO(45) of 0, 1.3, 4.5, 9.0, 12.5, and 16.7% at the surface pressures of 5, 15, and 35 mN/m. The monolayer compression isotherms indicated that the mixed monolayers at 5, 15, are 35 mN/m are mainly in the so-called "pancake", "mushroom", and "brush" states, respectively. The SFG spectra in the OH stretching vibration region give rise to SFG bands near 3200 and 3400 cm(-1). The mean molecular amplitude of the former band due to the OH stretching of the "icelike" water molecules associated mainly with the hydrophilic poly(ethylene oxide) (PEO) chains, exhibits appreciable decrease on compression of the mixed monolayers from 5 to 15 mN/m. The result corroborates the model for the pancake-mushroom transition, which presumes the dissolution of the PEO chains from the air-water interface to the water subphase. Further compression of the mixed monolayers to 35 mN/m causes a slight decrease of the line amplitude, which can be explained by considering a squeezing out of water molecules from the hydrophilic groups of DSPE-EO(45) in the brush state, where the PEO chains strongly interact with each other to form a tight binding state of the hydrophilic groups. The relative intensities of the SFG bands due to the CH3 asymmetric and symmetric vibrations were used to estimate the tilt angles of the terminal methyl group of DSPE, indicating that the angle increases with increasing the mole fraction of DSPE-EO(45). The angles almost saturate at the mole fraction larger than 10%, the saturation angle being nearly 90 degrees at 5 mN/m, ca. 60 degrees at 15 mN/m, and ca. 47 degrees at 35 mN/ m. Then, the introduction of the hydrophilic PEO head group causes a large tilting of the alkyl groups of DEPE in the mixed monolayers.     

Orientational motions of vibrational chromophores in molecules at the air/water interface with time-resolved sum frequency generation

The first time-resolved experiments in which interfacial molecules are pumped to excited electronic states and probed by vibrational sum frequency generation (SFG) are reported. This method was used to measure the out-of-plane rotation dynamics, i.e. time dependent changes in the polar angle, of a vibrational chromophore of an interfacial molecule. The chromophore is the carbonyl group, the rotation observed is that of the -C=O bond axis, with respect to the interfacial normal, and the interfacial molecule is coumarin 314 (C314) at the air/water interface. The orientational relaxation time was found to be 220+/-20 ps, which is much faster than the orientational relaxation time of the permanent dipole moment axis of C314 at the same interface, as obtained from pump-second harmonic probe experiments. Possible effects on the rotation of the -C=O bond axis due to the carbonyl group hydrogen bonding with interfacial water are discussed. From the measured equilibrium orientation of the permanent dipole moment axis and the carbonyl axis, and knowledge of their relative orientation in the molecule, the absolute orientation of C314 at the air/water interface is obtained.     

Entropically mediated polyolefin blend segregation at buried sapphire and air interfaces investigated by infrared-visible sum frequency generation vibrational spectroscopy

The segregation behavior of binary polymer blends at hydrophilic solid sapphire and air interfaces was investigated by infrared-visible sum frequency generation (SFG) vibrational spectroscopy. SFG spectra were collected from a bulk miscible blend consisting of identical molecular weight (approximately 54,000) and similar surface free energy (29-35 dyn/cm) components of atactic polypropylene (aPP) and aspecific poly(ethylene-co-propylene) rubber (aEPR). Characteristic CH resonances of the blend were contrasted with those of the individual components at both buried (sapphire/polymer) and free (air/polymer) interfaces. Preferential segregation of the aPP component was observed after annealing at both air/polymer and sapphire/polymer interfaces. SFG spectra revealed ordering of the polymer backbone segments with the methylene (CH2) groups perpendicular to the surface at the sapphire interface and the methyl (CH3) groups upright at the air interface. The SFG results indicate that the surface composition can be determined from the peak intensities that are characteristic of each component and that conformational entropy played a likely role in surface segregation. aPP occupied a smaller free volume at the surface because of a statistically smaller segment length (aPP is more flexible and has a shorter length). In addition, the high density of the ordered CH3 side branches enhanced the surface activity by allowing the long-chain backbone segments of aPP to order at the surface.     

Surface restructuring behavior of various types of poly(dimethylsiloxane) in water detected by SFG

Surface structures of several different poly(dimethylsiloxane) (PDMS) materials, tetraethoxysilane-cured hydroxy-terminated PDMS (TEOS-PDMS), platinum-cured vinyl-terminated PDMS (Pt-PDMS), platinum-cured vinyl-terminated poly(diphenylsiloxane)-co-poly(dimethylsiloxane) (PDPS-co-PDMS), and PDMS-co-polystyrene (PDMS-co-PS) copolymer in air and water have been investigated by sum frequency generation (SFG) vibrational spectroscopy. The SFG spectra collected from all PDMS surfaces in both air and water are dominated by methyl group stretches, indicating that all the surfaces are mainly covered by methyl groups. Other than surface-dominating methyl groups, some -Si-CH2-CH2- moieties on the Pt-PDMS surface have also been detected in air, which are present at cross-linking points. Information about the average orientation angle and angle distribution of the methyl groups on the PDMS surface has been evaluated. Surface restructuring of the methyl groups has been observed for all PDMS surfaces in water. Upon contacting water, the methyl groups on all PDMS surfaces tilt more toward the surface. The detailed restructuring behaviors of several PDMS surfaces in water and the effects of molecular weight on restructuring behaviors have been investigated. For comparison, in addition to air and water, surface structures of PDMS materials mentioned above in a nonpolar solvent, FC-75, have also been studied. By comparing the different response of phenyl groups to water on both PDPS-co-PDMS and PS-co-PDMS surfaces, we have demonstrated how the restructuring behaviors of surface phenyl groups are affected by the structural flexibility of the molecular chains where they are attached.     

Polarization and experimental configuration analyses of sum frequency generation vibrational spectra, structure, and orientational motion of the air/water interface

Here we report a detailed study on spectroscopy, structure, and orientational distribution, as well as orientational motion, of water molecules at the air/water interface, investigated with sum frequency generation vibrational spectroscopy (SFG-VS). Quantitative polarization and experimental configuration analyses of the SFG data in different polarizations with four sets of experimental configurations can shed new light on our present understanding of the air/water interface. Firstly, we concluded that the orientational motion of the interfacial water molecules can only be in a limited angular range, instead of rapidly varying over a broad angular range in the vibrational relaxation time as suggested previously. Secondly, because different vibrational modes of different molecular species at the interface has different symmetry properties, polarization and symmetry analyses of the SFG-VS spectral features can help the assignment of the SFG-VS spectra peaks to different interfacial species. These analyses concluded that the narrow 3693 cm(-1) and broad 3550 cm(-1) peaks belong to C(infinityv) symmetry, while the broad 3250 and 3450 cm(-1) peaks belong to the symmetric stretching modes with C2v symmetry. Thus, the 3693 cm(-1) peak is assigned to the free OH, the 3550 cm(-1) peak is assigned to the singly hydrogen-bonded OH stretching mode, and the 3250 and 3450 cm(-1) peaks are assigned to interfacial water molecules as two hydrogen donors for hydrogen bonding (with C2v symmetry), respectively. Thirdly, analysis of the SFG-VS spectra concluded that the singly hydrogen-bonded water molecules at the air/water interface have their dipole vector directed almost parallel to the interface and is with a very narrow orientational distribution. The doubly hydrogen-bonded donor water molecules have their dipole vector pointing away from the liquid phase.     

Molecular dynamics analysis of interfacial structures and sum frequency generation spectra of aqueous hydrogen halide solutions

Molecular dynamics simulation for gas/liquid interfaces of aqueous hydrochloric (HCl) and hydroiodic (HI) acid solutions is performed to calculate and analyze their sum frequency generation (SFG) spectra. The present MD simulation supports the strong preference of hydronium ions at the topmost surface layer and a consequent formation of ionic double layers by the hydronium and halide ions near the interface. Accordingly, the orientational order of surface water in the double layers is reversed in the acid solutions from that in the salt (NaCl or NaI). The calculated SFG spectra of the O-H stretching region reproduce the experimental spectra of ssp and sps polarizations well. In the ssp spectra, the strong enhancement in the hydrogen-bonding region for the acid solutions is elucidated by two mechanisms, ordered orientation of water in the double layer and symmetric OH stretching of the surface hydronium ions. In the sps spectra, reversed orientation of surface water is evidenced in the spectral line shapes, which are quite different from those of the salt solutions.     

Structure of the liquid-vapor interface of water-methanol mixtures as seen from Monte Carlo simulations

Monte Carlo simulation of the vapor-liquid interface of water-methanol mixtures of different compositions, ranging from pure water to pure methanol, have been performed on the canonical (N, V, T) ensemble at 298 K. The analysis of the systems simulated has revealed that the interface is characterized by a double layer structure: methanol is strongly adsorbed at the vapor side of the interface, whereas this adsorption layer is followed at its liquid side by a depletion layer of methanol of lower concentration than in the bulk liquid phase of the system. The dominant feature of the interface has been found to be the adsorption layer in systems of methanol mole fractions below 0.2, and the depletion layer in systems of methanol mole fractions between 0.25 and 0.5. The orientation of the molecules located at the depletion layer is found to be already uncorrelated with the interface, whereas the methanol molecules of the adsorption layer prefer to align perpendicular to the interface, pointing straight toward the vapor phase by their methyl group. Although both the preference of the molecular plane for a perpendicular alignment with the interface and the preference of the methyl group for pointing straight to the vapor phase are found to be rather weak, the preference of the methyl group for pointing as straight toward the vapor phase as possible within the constraint imposed by the orientation of the molecular plane is found to be fairly strong. One of the two preferred orientations of the interfacial water molecules present in the neat system is found to disappear in the presence of methanol, because methanol molecules aligned in their preferred orientation can replace these water molecules in the hydrogen-bonding pattern of the interface.     

Probing of lipase activity at air/water interface by sum-frequency generation spectroscopy

The infrared-visible sum-frequency generation (SFG) vibrational spectroscopy was used to probe enzymatic activity of Thermomyces lanuginosus lipase (TLL) at air/water interface. A monolayer of amphiphilic O-palmitoyl-2,3-dicyanohydroquinone (PDCHQ), containing target ester group and two CN groups serving as vibrational markers, was utilized as an enzyme substrate. SFG data revealed the detailed molecular scale structure and properties of the PDCHQ layer at the interface. In particular, we demonstrate that hydrophilic headgroup of PDCHQ is mainly in the form of an oxyanion, and the enzyme-induced cleavage of the ester bond could be spectroscopically monitored by the disappearance of the intense C tripple bond N resonance at 2224 cm(-1). The enzymatic nature of the ester bond cleavage was confirmed by the control experiments with deactivated S146A mutant variant of TLL. By comparing action of wild type (WT) TLL and its inactive S146A mutant, it was shown that two effects take place at the interface: disordering of the lipid monolayer due to the adsorption of enzyme and enzymatic cleavage of the ester bond. The concentration of enzyme as low as 10 nM could be easily sensed by the SFG spectroscopy. We present spectroscopic evidence that upon hydrolysis one of the products, 2,3-dicyanohydroquinone, leaves the surface, while the other, palmitic acid, remains at air/water interface in predominantly undissociated form with the mono-hydrogen-bonded carbonyl group. Strong amide I (1662 cm(-1)) and amide A (3320 cm(-1)) SFG signals from TLL suggest that enzyme molecules position themselves at air/water interface in an orderly fashion. Presented work demonstrates the potential of SFG spectroscopy for in situ real-time monitoring of enzymatic processes at air/water interface.     

Recent progress in theoretical analysis of vibrational sum frequency generation spectroscopy

This article summarizes the computational analysis of the vibrational sum frequency generation (SFG) spectroscopy with molecular dynamics simulation. The analysis allows direct comparison of experimental SFG spectra and microscopic interface structure obtained by molecular simulation, and thereby obviates empirical fitting procedures of the observed spectra. In the theoretical formulation, the frequency-dependent nonlinear susceptibility of an interface is calculated in two ways, based on the energy representation and time-dependent representation. The application to aqueous interfaces revealed a number of new insights into the local structure of electrolyte interfaces and the interpretation of SFG spectroscopy.     

Methyl groups of trimethylamine N-oxide orient away from hydrophobic interfaces

The molecular orientation of trimethylamine N-oxide (TMAO), a powerful protein stabilizer, was explored at aqueous/hydrophobic interfaces using vibrational sum frequency spectroscopy (VSFS). The systems studied included the octadecyltrichlorosilane (OTS)/water interface, which represents an aqueous solution in direct contact with a hydrophobic medium. Surprisingly, the measurements revealed that the methyl groups of TMAO pointed into the aqueous phase and away from the OTS. This orientation may arise from the more hydrophilic nature of methyl groups attached to a strongly electron-withdrawing atom such as a quaternary nitrogen. Additional studies were performed at the air/water interface. This interface showed a high degree of TMAO alignment, but the dangling OH from water was present even at 5 M TAMO. Moreover, the addition of this osmolyte modestly increased the surface tension of the interface. This meant that this species was somewhat depleted at the interface compared to the bulk solution. These findings may have implications for the stabilizing effect of TMAO on proteins. Specifically, the strong hydration required for the methyl groups as well as the oxide moiety should be responsible for the osmolyte's depletion from hydrophobic/aqueous interfaces. Such depletion effects should help stabilize proteins in their folded and native conformations on entropic grounds, although orientational effects may play an additional role.