TeO2-SiO2/（z-TeO2 Composite Film Prepared by Electrochemical sol-gel Method and Its Non-linear Optical Properties

以异丙醇碲和正硅酸乙酯作为前驱体,配制了稳定的TeO2-SiO2复合溶胶;以之为电解液采用电化学-溶胶凝胶法制备了黑色的凝胶薄膜,将薄膜经热处理后得到灰白色半透明的复合薄膜.分别采用XRD和SEM-EDX研究复合薄膜的晶体结构、表面形貌及其组成,结果表明凝胶薄膜的主要成分为Si,Te,O元素,黑色的凝胶薄膜为TeO2-SiO2/Te,灰白色半透明的复合薄膜为少量Te的SiO2-TeO2/α-TeO2;α-TeO2颗粒和少量Te颗粒均匀分散在TeO2-SiO2凝胶复合薄膜中.采用Z-scan方法测试薄膜的光学性能,结果表明其三阶非线性极化率χ（3）为2.171×10-14（m V-1）2.     

Synthesis and Characterization of Polyaniline/Partially Phosphorylated Poly（vinyl alcohol） Nanoparticles

The polyaniline/partially phosphorylated poly（vinyl alcohol）（PANI/P-PVA） nanoparticles were prepared by the chemical oxidative dispersion polymerization of aniline monomer in 0.5 mol/L HC1 aqueous media with the partially phosphorylated poly（vinyl alcohol） （P-PVA） as the stabilizer and co-dopant. The PANI/P-PVA nanoparticles were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectroscopy （FTIR）, thermal gravimetric analysis （TGA）, X-ray diffraction （XRD）, electrical conductivity measurements and re-dispersion stability testing. All the results were compared with the properties of the conventional polyaniline in the emeraldine salt form （PANI ES）. It was found that the feeding ratio of P-PVA obviously affected the morphology, re-dispersion stability and electrical conductivity of the PANI/P-PVA nanoparticles. When the feeding ratio of P-PVA ranged from 40 wt% to 50 wt%, the PANI/P-PVA nanoparticles showed spherical shape with good uniformity, significant re-dispersion stability in aqueous media and good electrical conductivity.     

Effects of Branches on the Crystallization Kinetics of Polypropylene-g- Polystyrene and Polypropylene-g-Poly（n-butyl acrylate） Graft Copolymers with Well-defined Molecular Structures

Effects of branches on the crystallization kinetics of polypropylene-g-polystyrene(PP-g-PS) and polypropylene-gpoly(n-butyl acrylate)(PP-g-PnBA) graft copolymers with well-defined molecular structures were systematically investigated by DSC.The Avrami equation was used to analyze the isothermal crystallization process,while the analysis of nonisothermal crystallization process was based on the Jeziorny-modified Avrami model and Mo model.The kinetics results of isothermal and nonisothermal crystallization verified the peculiar effects of branches on the crystallization process of PP backbones in PP-g-PS and PP-g-PnBA graft copolymers:on one hand,the interaction between branches(π-π interaction between PS branches,or dipole-dipole interaction between PnBA branches) restrained the mobility and reptation ability of the PP backbones,which hindered the crystallization process;on the other hand,the heterogeneous nucleation effect resulting from the branched structure and fluctuation-assisted nucleation mechanism(caused by microphase separation between the PS or PnBA rich phase and the PP rich phase) became more pronounced with increasing branch length,which facilitated the crystallization process.     

Formation of Poly（L-lactide） Mesophase and Its Chain Mobility Dependent Kinetics

In the present work, the PLLA mesophase formation and its kinetics at the advent of a chain mobility accelerator （polyethylene glycol （PEG）） are investigated by wide angle X-ray diffraction （WAXD） and time-resolved Fourier transform infrared spectroscopy （FTIR）. It is interestingly found that the presence of PEG could accelerate the formation of PLLA mesophase notably due to the enhanced chain mobility, giving rise to a substantially reduced half time （t0.5） of PLLA mesophase formation from 129 min to 8 min. The Avrami exponents （n） for the kinetics of mesophase formation are -0.5 for neat PLLA and 1 for PLLA/PEG, respectively, indicating that 1D-rod growth through heterogeneous nucleation occurs during formation of PLLA mesophase. Tensile testing demonstrates that PLLA mesophase could increase the tensile strength and modulus but decrease the elongation at break.     

Crystalline Morphology and Crystallization Kinetics of Melt-miscible Crystalline/Crystalline Polymer Blends of Poly（vinylidene fluoride） and Poly（butylene succinate-co-24mol% hexamethylene succinate）

Poly（vinylidene fluoride） （PVDF） and poly（butylene succinate-co-24 mol% hexamethylene succinate） （PBHS）, both crystalline polymers, formed melt-miscible crystalline/crystalline polymer blends. Both the characteristic diffraction peaks and nonisothermal melt crystallization peak of each component were found in the blends, indicating that PVDF and PBHS crystallized separately. The crystalline morphology and crystallization kinetics of each component were studied under different crystallization conditions for the PVDF/PBHS blends. Both the spherulitic growth rates and overall isothermal melt crystallization rates of blended PVDF decreased with increasing the PBHS composition and were lower than those of neat PVDF, when the crystallization temperature was above the melting point of PBHS component. The crystallization mechanism of neat and blended PVDF remained unchanged, despite changes of blend composition and crystallization temperature. The crystallization kinetics and crystalline morphology of neat and blended PBHS were further studied, when the crystallization temperature was below the melting point of PBHS component. Relative to neat PBHS, the overall crystallization rates of the blended PBHS first increased and then decreased with increasing the PVDF content in the blends, indicating that the preexisting PVDF crystals may show different effects on the nucleation and crystal growth of PBHS component in the crystalline/crystalline polymer blends.     

Quantitative Correlation of Chromatographic Retention and Acute Toxicity for Alkyl（1- phenylsulfonyl） Cycloalkane Carboxylates and Their Structural Parameters by DFT

1 INTRODUCTION Quantitative structure-activity relationship (QSAR)is one of the necessary methods that could be emp- loyed to evaluate the hazards of organic chemicals. QSAR equation could be applied to predict the biological activity of unknown compounds, espe- cially for initial screening and evaluation of toxic compounds[1]. Moreover, the quantitative relation- ship between molecular structure and chromatogra- phic retention (capacity factor lgKW) could also bedeveloped to explain …     

Synthesis and Characterization of 5, 5＇,6,6＇ -（2, 2＇-Bipyridine）tetraacid

5,5‘,6,6‘-(2,2‘-Bipyridine)tetraacid, a new aza-aromatic tetraacid, was synthesizedstarting from diquinoline, and its structure was confirmed by means of mass spectrum and infrared spectrum.     

Growth and Chemical Thermodynamics Analysis of SiC Film on Si Substrate by Heating Polystyrene/Silica Bilayer Method

SiC films were prepared by modified heating polystyrene/silica bilayer method on Si (111) substrate in normal pressure flowing Ar ambient at 1300 o C. The films were investigated by Fourier transform infrared absorption, X-ray diffraction, and scanning electron microscopy measurements. The chemical thermodynamics process is discussed. The whole reaction can be separated into four steps. The carburizing of SiO is the key step of whole reaction. The main reaction-sequence is figured out based on Gibbs free energy and equilibrium constant. Flowing Ar is necessary to continue the progress of whole reaction by means of carrying out accumulating gaseous resultants. The film is very useful for application in a variety of MOS-based devices for its silica/SiC/Si(111) structure, in which the silica layer can be removed thoroughly by the standard RCA cleaning process.     

红外吸收法测定炼钢碳化硅类脱氧剂中的碳化硅

为了满足炼钢碳化硅类脱氧剂中碳化硅的分析,在参照国家标准方法的基础上,通过烧失率、助熔剂选择、线性化考核及精密度和准确度等条件试验,建立了红外吸收法测定炼钢碳化硅类脱氧剂中的碳化硅的分析方法。方法的回收率大于98%,相对标准偏差为0.5%～0.7%,准确度高,误差小,实用性强。     

Low-Pressure Chemical Vapor Deposition of Silicon Carbide Thin Films from Organopolysilanes

(Me₃Si)₂SiMe₂, (Me₃Si)₃SiMe and (Me₃Si)₄Si were used as precursors for the deposition of polycrystalline β-SiC thin films on silicon substrates at 1000–1200°C in a low-pressure hot-wall chemical vapor deposition reactor. The thin films were analyzed by X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy.     

SiC纤维的化学气相生长与表征

以一甲基三氯硅烷为气源化合物, 二茂铁为催化剂, 噻吩为催化助剂, 用化学气相生长法直接制备SiC纤维. 研究了裂解温度、催化剂及助剂浓度及H2与MTS的配比等因素对裂解产物形态的影响. 分别采用SEM, EDX和XRD对产物的组成和形貌进行了表征. 结果表明, 产物由单一的β-SiC组成. 通过改变反应条件, 无需高、低压气氛及激光辅助, 即可以获得直径为20 nm~1.5 μm、长度从10 μm至数毫米的高长径比SiC纤维.     

Deposition of Silicon Carbide Thin Films from 1,1-Dimethyl-1-Silacyclobutane

1,1-Dimethyl-1-silacyclobutane was used as a single-source precursor to deposit SiC thin films on Si(100) and Si(111) by low-pressure chemical vapor deposition (LPCVD). Polycrystalline β-SiC thin films were grown at temperatures 1100 and 1200°C. At temperatures between 950 and 1100°C, amorphous thin films of silicon carbide were obtained. The films were studied by X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), and electron diffraction (ED).     

Adsorption Kinetics,Equilibrium, and Thermodynamics of Copper From Aqueous Solutions using Silicon Carbide Derived from Rice Waste

Adsorption of Cu(II) from aqueous solution on a novel adsorbent, silicon carbide ash (SiC ash), was studied using batch technique. The adsorbent was prepared by pyrolysis of Egyptian rice waste (rice straw and rice husk) and was characterized by scanning electron microscopy (SEM), energy-dispersive x-ray (EDX), Fourier-transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and surface area analysis by Brunauer-Emmett-Teller (BET) Theory. The influence of pH, contact time, initial Cu(II) concentration, adsorbent dose, agitation speed, and temperature was investigated. Adsorption kinetics was analyzed using the pseudo-first-order, the pseudo-second-order, and intraparticular diffusion model. The adsorption process was found to follow a pseudo-second-order rate mechanism. The adsorption isotherm data could be well described by the Langmuir and Freundlich than the Dubinin–Radushkevich adsorption model. The adsorption capacity of 22.06 mg g^?1for SiC ash was obtained at pH = 5 and temperature of 298 K. Thermodynamic parameters, change in the free energy (ΔG°), the enthalpy (ΔH°), and the entropy (ΔS°), were also calculated. The overall adsorption process was exothermic, spontaneous in nature, and proceeds with decreased randomness as the entropy is negative value. Adsorption process was successfully applied to remove Cu(II) from an industrial wastewater sample.     

低温溶胶-凝胶法制备高致密度碳化硅陶瓷工艺研究

以柠檬酸为螯合剂,用溶胶-凝胶法制备碳化硅陶瓷烧结前驱粉体,在烧结助剂含量6%、铝钇摩尔比5/3、1850℃低烧结温度烧结1h条件下,获得了体密度为3.219g/cm3、相对密度为98.3%的高致密烧结体,采用IR、XRD、TG/DTA、SEM/EDS等手段对前驱粉体及烧结体进行了表征,讨论了烧结助剂含量、烧结温度等对碳化硅陶瓷烧结体的收缩率、体密度、失重率等特性的影响。     

Synthesis of Poly(silyne-co-hydridocarbyne) for Silicon Carbide Production

Pre-ceramic polymers have previously been shown to be polymeric precursors to silicon carbide, diamond and diamond-like carbon. Here, we report the synthesis of a pre-ceramic polymer, poly(silyne-co-hydridocarbyne), which was electrochemically synthesized from one monomer containing both silicon and carbon in its structure. The polymer is soluble in common solvents such as CHCl₃, CH₂Cl₂ and THF. Since the polymer contains both silyne and carbyne on its backbone, it can be easily converted to silicon carbide upon heating under an ambient inert atmosphere, or to SiO₂ under ambient air atmosphere. Poly(silyne-co-hydridocarbyne) was characterized with UV/Vis spectroscopy, FTIR, ¹H-NMR, GPC and Raman spectroscopy. Conversion of the polymer to SiC ceramic was accomplished by heating at 1000 and 750°C under an argon atmosphere and characterized with optical microscopy, SEM, X-Ray and Raman spectroscopies.     

用热分析技术测定碳化硅粉体对聚乙二醇的吸附量

用热分析技术TG-DTA(thermal gravimetric and differential thermal analysis)测定浆料中碳化硅粉体对分散剂聚乙二醇PEG(polyethylene glycol)的吸附量. 结果显示PEG在Ar气氛中411.5 ℃时完全分解; 碳化硅表面分散剂PEG的吸附量随着pH的增大而下降, 在较高pH下大多数分散剂仍存在于溶液中; 分散剂PEG的吸附量通过公式(1)进行计算. 该方法简单方便, 可以应用于测量氧化物或非氧化物吸附紫外-可见分光光度法不能测定的一些有机聚合物分子.