Influence of perpendicular external magnetic field on microstructures of monolayer composed of ferromagnetic particles: analysis by means of quasi-two-dimensional Monte Carlo simulation

We investigated the influences of the magnetic field strength and particle areal density on the microstructure of a quasi-two-dimensional monolayer composed of ferromagnetic particles by means of a Monte Carlo simulation. The magnetic field was applied along a direction perpendicular to the plane of the monolayer. Microstructures of the monolayer obtained in the simulations were analyzed in terms of radial distribution and orientational distribution functions. Formation of the microstructures is discussed from the perspective of particle-particle interaction energy and the perpendicular magnetic susceptibility of the monolayer was calculated from simulated magnetization curves. The obtained results are summarized as follows. For small areal density of particles, formation of chain-like structures is prevented by the repulsive magnetic interaction between particles due to orientations of the magnetic moments in the particles along the magnetic field direction. For intermediate areal density of particles, the chain-like structures remain even when a relatively strong magnetic field is applied, because contributions of the attractive magnetic interactions increase. For large areal density of particles, mixtures of chain-like and locally ordered structures appear due to the anisotropic attractive magnetic interactions in the absence of the magnetic field. However, when a sufficiently strong magnetic field is applied, the magnetic interactions between particles change to isotropic repulsive interactions, which results in the short-range repulsive steric interactions between particles becoming dominant with the appearance of hexagonal close packed structures.     

CFD analysis of paramagnetic particle containment in microwells

Designs for a flow-through biochemical sensor based on rotating chains of paramagnetic particles are analyzed with computational fluid dynamics and theoretical relations for particles in fluids. The sensor is based on the behaviour of paramagnetic particles--n particular, their tendency to align themselves into chain-like structures when subjected to a magnetic field. Paramagnetic particles can be prepared onto which fluorescently tagged analytes will attach. Rotating magnetic fields rotate the particle chains providing the opportunity to selectively acquire the signal associated with chains, through well known lock-in amplifier techniques. Commercially available CFD software can be used to address some basic questions in the design of such a sensor. Computational and experimental results suggest that a trade-off exists between the efficiency of delivering the analyte to the particle chains and the difficulty of holding the chains in the desired location.     

Estimation of magnetic particle clustering in magnetic fluids from static magnetization experiments

The volume fraction dependence of the static magnetization of two magnetic fluids with different degrees of steric stabilization was measured at low field values (0-10 kA/m) and it was found to be nonlinear for both magnetic fluids. The nonlinearity is more pronounced in the case of the less stabilized magnetic fluid. The experimental data were processed by nonlinear regression using an analytical model for the formation of chain-like magnetic particle aggregates in magnetic fluids. The calculated dependence on the degree of steric stabilization, magnetic field, and sample concentration of the mean number of particles per chain was in the range (1-1.04).     

3D Monte Carlo simulations of a magnetic disk-like particle dispersion

We have investigated the aggregate structures of a colloidal dispersion composed of ferromagnetic disk-like particles with a magnetic moment normal to the particle axis at the particle center, by means of 3D Monte Carlo simulations. Such disk-like particles have been modeled as a circular disk-like particle with the side section shape of spherocylinder. We have attempted to clarify the influences of the magnetic field strength, magnetic interactions between particles and volumetric fraction of particles. In order to discuss quantitatively the aggregate structures of clusters, we have focused on the radial distribution and orientational pair correlation functions, etc. For no applied magnetic field cases, long column-like clusters come to be formed with increasing magnetic particle–particle interactions. The internal structures of these clusters clearly show that the particles incline in a certain direction and their magnetic moments alternate in direction between the neighboring particles in the clusters. For applied magnetic field cases, the magnetic moment of each particle inclines in the magnetic field direction and therefore the column-like clusters are not formed straightforwardly. If the magnetic field is much stronger than magnetic particle–particle interactions, the particles do not have a tendency to form the clusters. As the influence of magnetic particle–particle interactions is significantly strong, thick chain-like clusters or column-like clusters or brick-wall-like clusters come to be formed along the magnetic field direction.     

晶种和磁场诱导联合法制备一维Fe3O4粒子

本文采用晶种和磁场诱导结合的方法制备出了一维Fe3O4纳米粒子,研究了晶种粒径大小、磁场强度、晶种添加量以及晶种分步次数对Fe3O4产品形貌的影响。结果表明,磁场强度增加,棒形颗粒数目增加;晶种分步次数增加,棒形粒子轴比增加;采用三次晶种可以得到轴比为9.0的棒形颗粒;少量的晶种有利于得到轴比一致、形貌均匀的棒形颗粒;大尺寸的晶种有利于得到链形颗粒。同时从颗粒间的相互作用能分析了磁场强度和晶种大小对形貌的影响。     

Influence of particle coating on dynamic mechanical behaviors of magnetorheological elastomers

In this paper, core-shell structured poly methyl methacrylate (PMMA) coated carbonyl iron (CI) particles were prepared to study the influence of particle coating on the dynamic properties of magnetorheological elastomers (MREs). The CI-PMMA composite particles were encapsulated via an emulsion polymerization method. Two MRE samples were prepared with CI-PMMA composite particles and CI particles, respectively. Their microstructure was observed by using a scanning electron microscope (SEM). Dynamic properties of these two samples under various strain and magnetic fields were measured with a dynamic mechanical analyzer (DMA). The experimental results indicate that the MRE sample with CI-PMMA composite particles has larger storage modulus, smaller loss factor and smaller Payne effect than that of the sample with only CI particles. The analysis indicates that the use of CI-PMMA particles would increase the bond strength between particles and matrix. These experimental results were also verified by the SEM images.     

Linear assemblies of magnetic nanoparticles as MRI contrast agents

Using a one-step procedure we have prepared magnetic fluids comprising of polyelectrolyte stabilized magnetite nanoparticles. These nanocomposites are comprised of linear, chain-like assemblies of magnetic nanoparticles, which can be aligned in parallel arrays by an external magnetic field. We have shown the potential use of these materials as contrast agents by measuring their MR response in live rats. The new magnetic fluids have demonstrated good biocompatibility and potential for in vivo MRI diagnostics.     

Demulsification by increasing the gravitational force acting upon the dispersed phase owing to the adsorption/absorption of the magnetite particles

Demulsification using a magnetic demulsifier is commonly used to separate emulsions using an external magnetic field. However, this study presents a new demulsification method based on the increased weight of the dispersed phase due to the adsorption/absorption of the magnetite particles by the droplets. Micron-sized bare magnetite particles were used as the demulsifier in this method which does not necessarily need to apply a surface-active additive and the magnetic field for the demulsification. Magnetic responsivity of the demulsifier can only be used for the recovery of the demulsifier. The demulsification experiments were performed using the oil-in-water and water-in-oil emulsions. The effect of temperature, wettability, demulsifier dosage and activity, sedimentation rate and particles size were investigated. The results showed that the proposed method can remarkably improve the efficiency and speed of the demulsification, and has a great potential to be considered for the commercialization.     

Anisotropic magnetoresistance and piezoresistivity in structured Fe3O4-silver particles in PDMS elastomers at room temperature

Magnetorheological elastomers, MREs, based on elastic organic matrices displaying anisotropic magnetoresistance and piezoresistivity at room temperature were prepared and characterized. These materials are dispersions of superparamagnetic magnetite forming cores of aggregated nanoparticles inside silver microparticles that are dispersed in an elastomeric polymer (poly(dimethylsiloxane), PDMS), curing the polymer in the presence of a uniform magnetic field. In this way, the elastic material becomes structured as the application of the field induces the formation of filaments of silver-covered inorganic material agglomerates (needles) aligned in the direction of the field (parallel to the field). Because the magnetic particles are covered with silver, the MREs are not only magnetic but also electrical conductors. The structuration induces elastic, magnetic, and electrical anisotropic properties. For example, with a low concentration of particles in the elastic matrix (5% w/w) it is possible to obtain resistances of a few ohms when measured parallel to the needles or several megaohms in the perpendicular direction. Magnetite nanoparticles (Fe(3)O(4) NP) were synthesized by the coprecipitation method, and then agglomerations of these NPs were covered with Ag. The average size of the obtained magnetite NPs was about 13 nm, and the magnetite-silver particles, referred to as Fe(3)O(4)@Ag, form micrometric aggregates (1.3 μm). Nanoparticles, microparticles, and the MREs were characterized by XRD, TEM, SEM, EDS, diffuse reflectance, voltammetry, VSM, and SQUID. At room temperature, the synthesized magnetite and Fe(3)O(4)@Ag particles are in a superparamagnetic state (T(B) = 205 and 179 K at 0.01 T as determined by SQUID). The elastic properties and Young's modulus of the MREs were measured as a function of the orientation using a texture analysis device. The magnetic anisotropy in the MRE composite was investigated by FMR. The electrical conductivity of the MRE (σ) increases exponentially when a pressure, P, is applied, and the magnitude of the change strongly depends on what direction P is exerted (anisotropic piezoresistivity). In addition, at a fixed pressure, σ increases exponentially in the presence of an external magnetic field (H) only when the field H is applied in the collinear direction with respect to the electrical flux, J. Excellent fits of the experimental data σ versus H and P were achieved using a model that considers the intergrain electron transport where an H-dependent barrier was considered in addition to the intrinsic intergrain resistance in a percolation process. The H-dependent barrier decreases with the applied field, which is attributed to the increasing match of spin-polarization in the silver covers between grains. The effect is anisotropic (i.e., the sensitivity of the magnetoresistive effect is dependent on the relative orientation between H and the current flow J). In the case of Fe(3)O(4)@ Ag, when H and J are parallel to the needles in the PDMS matrix, we obtain changes in σ up to 50% for fields of 400 mT and with resistances on the order of 1-10 Ω. Magnetoresistive and magnetoelastic properties make these materials very interesting for applications in flexible electronics, electronic skins, anisotropic pressure, and magnetic field sensors.     

Enhancement of a magnetorheological PDMS elastomer with carbonyl iron particles

A magnetorheological elastomer based on silicone rubber with carbonyl iron micro-particles was developed. The influence of the different amount of iron particles was experimentally studied by means of XRD, SEM, FTIR, EDS, XPS, uniaxial tension and rheological and cyclic tests. Different contents of carbonyl iron particles (10–40 wt%) were used to obtain the ratio of magnetic particles/silicone rubber that could provide the best mechanical properties on the MRE material. It was found that the composite material can have an increase of about 95% in its tensile strength when adding 20% of carbonyl iron particles to the raw rubber material. SEM analysis indicates a good dispersion of the magnetic particles on the rubber matrix, and the FTIR and XPS techniques confirm, as expected, that there is no chemical interaction between the iron from the carbonyl iron particles and the silicone rubber matrix due to a proper coating of the particles with silicone oil used as coupling agent. The TGA results evidenced that the addition of coated carbonyl iron particles had an impact on the thermal stability of the MRE and on the formation of cross-linked structures. The viscoelastic behavior of the magnetorheological elastomer is described by running experimental test on a rheometer device. Furthermore, cyclic testing were performed on the material sample to characterize the Mullin's effect.     

形状记忆磁性润滑表面的制备及对超顺磁液滴的滑动操控

将磁性粒子与形状记忆聚合物复合,通过设计渐变式构型构筑了梯度形状磁性材料,并与润滑涂层相结合,制备了一种磁性润滑表面.在磁性梯度的作用下,超顺磁液滴在表面上能够自发定向运动.借助于材料形状记忆效应对表面区域形态进行可逆调控,进一步展示了超顺磁液滴自发定向运动过程中的启停开关式控制,实现了将液滴定向自发运输与启停控制相结合.考察了磁性粒子含量对材料形状记忆性能的影响,以及区域形态调控尺寸与液滴滑动性能间的相互关系.机理分析进一步阐明磁场梯度提供的定向驱动力促使液滴定向自发输运,表面区域形态控制的可逆调控则可以在液滴运动过程中增加/消除黏滞阻力,基于两种因素的协同作用,可以实现对超顺磁液滴运动的智能操控.     

Three-dimensional Monte Carlo simulations of internal aggregate structures in a colloidal dispersion composed of rod-like particles with magnetic moment normal to the particle axis

We have treated a suspension composed of ferromagnetic rod-like particles with a magnetic moment normal to the particle axis in order to investigate aggregation phenomena of such a suspension by means of cluster-moving Monte Carlo simulations. In the present study, we have considered a three-dimensional mono-dispersed model system composed of such rod-like particles. Internal structures of self-assembled clusters have been discussed quantitatively in terms of radial distribution, pair correlation, orientational pair correlation functions, number distributions of clusters, and order functions. The main results obtained here are summarized as follows. Rod-like particles tend to aggregate to form raft-like clusters along the magnetic moment direction more significantly with magnetic particle-particle interactions. In such raft-like clusters, the direction of each particle axis has a tendency to incline in parallel formation, but is not so parallel as in a two-dimensional dispersion. As the volumetric fraction increases, longer raft-like clusters are formed, but such raft-like clusters do not aggregate further to form thicker clusters, which is in significantly contrast with a dispersion of spherical particles, where thicker chain-like clusters are observed under certain conditions. For the case of strong magnetic particle-particle interactions, sufficiently long raft-like clusters are formed along the magnetic field direction, even if the influence of an external magnetic field is of the same order of that of the thermal energy. However, rod-like particles in such clusters do not necessarily incline in significantly parallel formation along a certain direction. Self-assembled tube-like clusters are formed when magnetic particle-particle interactions are much more dominant than the rotational Brownian motion under circumstances of rod-like particles inclining in a certain direction.     

The evaluation and implementation of magnetic fields for large strain uniaxial and biaxial cyclic testing of Magnetorheological Elastomers

Magnetorheological Elastomers (MREs) are “smart” materials whose physical properties are altered by the application of magnetic fields. In previous studies the properties of MREs have been evaluated under a variety of conditions, however little attention has been paid to the recording and reporting of the magnetic fields used in these tests [1]. Currently there is no standard accepted method for specifying the magnetic field applied during MRE testing. This study presents a detailed map of a magnetic field applied during MRE tests as well as providing the first comparative results for uniaxial and biaxial testing under high strain fatigue test conditions. Both uniaxial tension tests and equi-biaxial bubble inflation tests were performed on isotropic natural rubber MREs using the same magnetic fields having magnetic flux densities up to 206 mT. The samples were cycled between pre-set strain limits. The magnetic field was switched on for a number of consecutive cycles and off for the same number of following cycles. The resultant change in stress due to the application and removal of the magnetic field was recorded and results are presented.     

Cooperativity in the adsorption of magnetic colloidal particles

In this paper we investigate the adsorption of magnetic particles onto magnetically patterned substrates. We find that the adsorption process is cooperative, where the probability of adsorption decreases with increasing substrate occupancy (namely, density of adsorbed particles). The effect of cooperativity can be accounted for by a simple modification of the adsorption probability as manifested by the binomial distribution. The negative cooperativity found in the magnetic particle adsorption is not due to direct repulsion between particles, but to screening of the surface's magnetic field by previously adsorbed particles. Thus, the adsorption of magnetic colloids on magnetic substrates is a self-limiting process.     

Compressive properties of magnetorheological elastomer with different magnetic fields and types of filler

Magnetorheological elastomer (MRE) specimens were prepared to find the optimum compressive characteristics using different types and amounts of iron powder. A magnetic field of up to 2 T was applied during vulcanization. Among the four types of iron powders, the specimen with round‐shaped carbonyl iron powder and small grain size shows higher magnetic effects than that with bigger and irregularly shaped electrolyte iron powder. However, the compressive modulus of the rubber with electrolyte iron powder is higher without magnetic treatment at a given amount. In general, the bigger and irregularly shaped iron particles tend to move slowly and produce nonuniform distribution when a magnetic field is applied. The experimental results show that the mechanical properties are better when applying a magnetic field of 1.5 T compared with 2.0 T during the specimen vulcanization. Applying a magnetic field of 300 mT during the compression test enhanced the compressive modulus by 12% to 15%. The rate of increase of the modulus decreased exponentially with prestrain.     

Microstructure analysis of magnetostrictive composites

To understand the mechanism and the dependency between magnetostrictive composite performance and the orientation of the magnetic field, composites with 30% particles by volume were fabricated by distributing Terfenol-D particles in an unsaturated polyester resin matrix under various orientation fields. Their static and dynamic magnetostriction was tested without pre-stress at room temperature. The results indicate there is a positive correlation between magnetostrictive property and the orientation field. This study used scanning electron microscopy to observe the material longitudinal microstructures followed by a statistical analysis to evaluate the angle distribution between the major axis of the particles and the orientation field in different composites. In summary, this method can be used to elucidate the microstructure of the composites directly: the higher the orientation field, the closer the microstructure to 1–3 structure. As a result, the static and dynamic magnetostriction is increased as the orientation field increases.     

Magnetic resonance energies of heterocyclic conjugated molecules

Magnetic resonance energy (MRE), derived from ring-current diamagnetic susceptibility, can be interpreted as a kind of aromatic stabilization energy. For polycyclic conjugated hydrocarbons, this quantity correlates well with topological resonance energy (TRE). MREs for typical heterocyclic conjugated molecules were then calculated and analyzed. It was found that even for heterocycles MRE highly correlates with TRE. Thus, the MRE concept has been firmly established as a reliable indicator of aromaticity, which mediates magnetic criteria of aromaticity with energetic ones. The conformity of heterocycles to the rule of topological charge stabilization can be checked using not only TRE but also MRE.     

Dependence of electromagnetic wave absorption properties on the topography of Ni anchoring on reduced graphene oxide

Specific topographic Ni anchoring on reduced graphene oxide(rGO) composites show an astronomical potential as effective wave absorbers due to the synergistic electromagnetic loss effects.Herein,Ni/rGO composites with different topography were successfully prepared via hydrothermal in-situ reduction method.The structure and morphology characteristics revealed that particle-like,chain-like,coin-like and flower-like Ni were closely anchored onto rGO,respectively.The electromagnetic wave absorption(EMA) performance revealed that chain-like Ni/rGO exhibited the optimal reflection loss of-43.7 dB with a thickness of 1.8 mm as well as the EAB of 6.1 GHz at 2.0 mm among all samples due to the good impedance match and the synergistic dielectric and magnetic losses.Besides,one conclusion can be drawn that excellent magnetic coupling effect and impedance matching were the main reasons for significantly improving the EMA performance.Considering the systematic dependence of morphology on EMA,this work provides a perspective for designing high-performance absorbing materials.     

Strong magnetic field effects on solid-liquid and particle-particle interactions during the processing of a conducting liquid containing non-conducting particles

The behavior of micrometer-sized weak magnetic insulating particles migrating in a conductive liquid metal is of broad interest during strong magnetic field processing of materials. In the present paper, we develop a numerical method to investigate the solid-liquid and particle-particle interactions by using a computational fluid dynamics (CFDs) modeling. By applying a strong magnetic field, for example, 10 Tesla, the drag forces of a single spherical particle can be increased up to around 15% at a creeping flow limit. However, magnetic field effects are reduced when the Reynolds number becomes higher. For two identical particles migrating along their centerline in a conductive liquid, both the drag forces and the magnetic interaction will be influenced. Factors such as interparticle distance, Reynolds number and magnetic flux density are investigated. Shielding effects are found from the leading particle, which will subsequently induce a hydrodynamic interaction between two particles. Strong magnetic fields however do not appear to have a significant influence on the shielding effects. In addition, the magnetic interaction forces of magnetic dipole-dipole interaction and induced magneto-hydrodynamic interaction are considered. It can be found that the induced magneto-hydrodynamic interaction force highly depends on the flow field and magnetic flux density. Therefore, the interaction between insulating particles can be controlled by applying a strong magnetic field and modifying the flow field. The present research provides a better understanding of the magnetic field induced interaction during liquid metal processing, and a method of non-metallic particles manipulation for metal/ceramic based materials preparation may be proposed.     

Field induced rotational viscosity of ferrofluid: effect of capillary size and magnetic field direction

In the present investigation we report the effect of capillary diameter and the direction of applied magnetic field on the rotational viscosity of water and kerosene based ferrofluids. We found that changes in the field induced rotational viscosity are larger in the case of water based magnetic fluid than that of kerosene based fluid. The field induced rotational viscosity is found to be inversely proportional to the capillary diameter and it falls exponentially as a function of the angle between the direction of field and vorticity of flow. Magnetophoretic mobility and hydrodynamic volume fraction of nanomagnetic particles are determined for above cases.