Concept of power consumption saving in transflective liquid crystal displays

This study proposes the concept of power consumption saving in transflective liquid-crystal displays (TR-LCDs). This concept is based on the design of a TR-LCD with three different display modes, namely, transmissive (T), reflective (R) and transflective (TR). Among the three, the TR mode is most often used to operate the designed LCD. To conserve power and extend the battery life, the designed LCD can be switched to operate in T/R mode in an environment with dim/stable ambient light. The highest operation voltages of both T and R modes are less than half of that of the TR mode. Moreover, the strong and weak surface anchoring energies that affect TR-LCD performance and the various pretilt angles of LCs are discussed. Moreover, the operating voltage (3.7 V) to obtain the good dark state of the three modes is independent of the errors of cell gap fabrication and surface anchoring energy, and temperature effect. The concept can be applied to portable electronic gadgets in which power consumption is an important issue.     

Electrically controlled director slippage over a photosensitive aligning surface; in-plane sliding mode

We have studied the electro-optical characteristics of a homogeneously aligned nematic liquid crystal (LC) with weak planar anchoring of the director at the bounding substrates. By using the in-plane switching (IPS) of the LC which is achieved by an in-plane electric field, the driving voltage was confirmed to be far less than that of the conventional IPS mode in which both substrates possess strong anchoring characteristics. Moreover, because of the absence of strong subsurface director deformations, the cell could operate optically in the Mauguin regime. Using these features we propose a new type of LC switching mode - in-plane sliding (IPSL) mode. We have realized this mode in a LC cell comprising one reference substrate with strong director anchoring and one substrate covered with photoaligning material with weak anchoring. In order to clarify the switching process, we derived a simplified expression for the threshold voltage on the assumption of uniformity of the in-plane electric field. For the dynamical response of the LC to the in-plane electric field, the switching on and off relaxation times of the IPSL mode were found to be longer than for the traditional IPS mode. However, we have proposed an optimized cell geometry for the IPSL mode with a response time comparable to that of the IPS mode.     

The in-plane switching of homogeneously aligned nematic liquid crystals

We have investigated the electro-optical effects and physical switching principle of homogeneously aligned nematic liquid crystals when applying an in-plane electric field with interdigital electrodes. By using the in-plane switching (IPS) of the liquid crystals which is achieved by the in-plane electric field, the viewing angle characteristics of the electro-optical effects were confirmed to be far superior to those of the conventional twisted nematic mode in which the electric field is applied along the direction perpendicular to the substrates. The non-reversal region of grey scales was extremely wide in which a high contrast ratio was kept, even along quite an oblique direction in the IPS mode. In order to clarify the switching principle of the liquid crystals in the IPS mode, a simplified expression describing the threshold behaviour of the device was derived with the assumption that a uniform in-plane electric field was applied along a direction perpendicular to the director and parallel to the homogeneously aligned nematic slab, and found to be sufficiently able to explain the experimental results. First, a critical field at which the liquid crystals just began to twist, was found to be proportional to the reciprocal of the cell gap. Second, it was the electric field and not the voltage that drives the liquid crystals. This relationship was due to the independence of the electric field regarding the liquid crystal layer normal direction. So the threshold voltage in the IPS mode was strongly dependent on the variation of the cell gap. For the dynamical response mechanism of the liquid crystals to the in-plane electric field, the switching on and off processes of the liquid crystals were analysed quantitatively. The relaxation time of the liquid crystals when removing the electric field could be described as proportional to the square of the cell gap. A thinner cell gap also proved to be effective in obtaining a fast response time in the IPS mode. In contrast, the switching on time when applying the in-plane electric field was found to be inversely proportional to the difference between the square of the electric field strength and the square of the critical electric field strength at which the liquid crystals began to deform.     

Effect of crosslinking polymer networks on the molecular reorientation and electro‐optical performance of in‐plane switching vertically aligned liquid crystal devices

The effects of crosslinking polymer networks (PNs) on the molecular reorientation and electro‐optical properties of vertically aligned (VA) liquid crystal (LC) devices are investigated by applying an in‐plane switching (IPS) electric field. Through the polymerization process, crosslinking PNs are developed on the substrate surface, effectively increasing the anchoring energy and governing the LC molecular reorientation. With its stronger anchoring effect, the PNs cell shows good light transmittance and excellent vertical alignment quality, as compared to the pure LC cell. Furthermore, the alignment transformation and transmittance bounce resulting from the transient process of LC molecular reorientation are eliminated when the cell is operated at high voltages. The rising‐time (t_r) and falling‐time (t_f) responses of the PNs cell are significantly improved, and around 36% improvement in the optical switching response is obtained. In addition, the dynamic gray‐level t_r and t_f responses of the PNs cell are enhanced by around 55% and 42%, respectively, at a low driving voltage (～12 V). This developed VA‐IPS LC/PNs cell benefits not only the LC molecular alignment but also the electro‐optical performance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1123–1130     

Cell gap‐dependent transmission characteristics of a fringe‐electric field‐driven homogeneously aligned liquid crystal cell,for a liquid crystal with negative dielectric anisotropy

Transmittance characteristics were studied as a function of cell gap for a homogeneously aligned liquid crystal (LC) cell driven by a fringe‐electric field—named fringe‐field switching (FFS) mode. The light efficiency of a conventional LC cell using in‐plane switching and twisted nematic modes, where the LC director is determined by competition between elastic energy and electrical energy, does not depend on cell gap as long as the cell retardation value remains the same; i.e. only dielectric torque contributes to the deformation of the LC director. However, the transmittance of the FFS mode is dependent on the cell gap such that it decreases as the cell gap decreases, although the cell retardation value remains the same. This unusual behaviour (unlike that of conventional LC cells) arises because in the device the elastic and dielectric torques have the role of determining the LC director, such that the driving voltage giving rise to maximum transmittance becomes strongly dependent on the electrode position when the cell gap is as small as 2?µm. In addition, the LCs at the centre of the pixel and common electrodes are not sufficiently twisted because of a competition between the two elastic forces, which tries to twist the LCs in plane and hold them in their initial state by surface anchoring.     

Flow induced bistable anchoring switching in nematic liquid crystals

A hydrodynamically controlled switching of orientations of a nematic bistable surface anchoring is observed. A viscous torque moves surface lines between domains corresponding to bistable anchoring. An observed threshold for this viscous torque is attributed to relative spatial inhomogeneities of surface energy (∼10^-2).     

Blue-phase liquid crystal display with high dielectric material

A blue-phase liquid crystal display (BPLCD) with low operating voltage and high transmittance is demonstrated by using a high dielectric material, which is used as an insulation layer or protrusion fixed on the pixel and common electrodes in in-plane switching (IPS) mode. The operating voltage is reduced to about 14 V and the transmittance is improved for the BPLCD with high dielectric constant protrusion. Compared with the conventional protrusion electrode structure, the proposed protrusion can make manufacturing process simple and easy because the electrode has no complex shape. The results will be significant in designing optimal BPLCDs.     

Residual d.c. characteristics in the in-plane switching liquid crystal display by the capacitance-voltage hysteresis method on a polymer surface

In this research, the image-sticking property of the in-plane switching (IPS)-liquid crystal display (LCD) with residual d.c. voltage on a rubbed polyimide surface was studied. The voltage holding ratio (VHR) and residual d.c. voltage were measured by the capacitance-voltage hysteresis method in the IPS-LCDs. It was found that the VHR increased with increasing specific resistivity of fluorine-containing LCs. The residual d.c. voltage decreased with increasing concentration of cyano-containing LCs. The residual d.c. voltage is thus decreased by the high polarity of cyano-LCs.     

Residual d.c. characteristics in the in-plane switching liquid crystal display by the capacitance-voltage hysteresis method on a polymer surface

In this research, the image-sticking property of the in-plane switching (IPS)-liquid crystal display (LCD) with residual d.c. voltage on a rubbed polyimide surface was studied. The voltage holding ratio (VHR) and residual d.c. voltage were measured by the capacitance-voltage hysteresis method in the IPS-LCDs. It was found that the VHR increased with increasing specific resistivity of fluorine-containing LCs. The residual d.c. voltage decreased with increasing concentration of cyano-containing LCs. The residual d.c. voltage is thus decreased by the high polarity of cyano-LCs.     

On the non-symmetric planar aligned NLC cell

The planar aligned nematic liquid crystal cell with different anchoring for the two substrates (i.e. a non-symmetric NLC cell) is investigated by an analytical method. We deduce the basic equations and the boundary conditions of the tilt angle θ of the LC director. Expressions for threshold and saturation magnetic field are obtained, and numerical results of these two quantities with variation in anchoring parameters of the two substrates are given. A symmetry breaking parameter Δ is introduced and the relations between Δ and applied field, as well as the two sets of anchoring parameters are discussed in detail. A feasible experimental plan for measurement of anchoring strengths of a series of different substrates is proposed.     

Electro-optic applications of soluble polypyrrole

The optical transmittance of the film spin-cast from the polypyrrole(PPy) solution in chloroform depended on the thickness of the film. The film with 80% transmittance showed a surface resistivity of 23kΩ/□. A TN-LCD cell with rubbed PPy films as the LC alignment layers responded properly to an applied potential of 3.0V. Reflective mode cholesteric LCD cells made with black PPy film electrodes responded to AC fields to switch between the planar and focal conic states. PPy with imine structures introduced by deprotonation of doped PPy with NaOH solution was used as a diode material to exhibit a photo-current on exposing to light.     

Theoretical studies on the topographical features and energetics of diacetylene-hydrogen fluoride complexes

Ab initio supermolecular SCF calculations have been carried out on diacetylene-HF complexes at the STO-4-31G level. The reverse σ (Rσ) complex has been found to have the lowest energy. Of the two π complexes. T and L, the symmetrical one T is found to be energetically less stable than the asymmetrical one L. Theoretical vibrational analysis tends to support this stability order. Electrostatic interaction energy calculations also lead to an almost identical sequence. Hydrogen bond energies corrected for basis set superposition error indicate that ΔE_H (Rσ) > ΔE_H (Tπ) ≈ ΔE_H (Lπ).     

Flexoelectric deformations of homeotropic nematic layers in the presence of ionic conductivity

Elastic deformations of homeotropic nematic liquid crystal layers subjected to a d.c. electric field were studied numerically in order to find the dependence of threshold voltage on the properties of such a system. A nematic material characterized by a negative sum of flexoelectric coefficients and by a small negative dielectric anisotropy was considered. The flow of ionic current was taken into account. The electric properties are described in terms of a weak electrolyte model. Finite surface anchoring strength was assumed. The director orientation, the electric potential and the ion concentrations were calculated as functions of the coordinate normal to the layer. It was found that the threshold for the deformation depends on the distributions of the ions, governed by the generation constant and by the properties of the electrodes. The effects observed may be interpreted as a consequence of the separation of the ions. When the electrodes have pronounced blocking character, a high and non-uniform electric field, created by the subelectrode ion space charges, causes drastic decrease of the threshold voltage, much below the value U _f valid for the insulating nematic. On the other hand, the electric field gradient arising in the bulk at moderate concentrations has a stabilizing effect and remarkably enhances the threshold above U _f. When the electrodes are conducting there are no significant space charges and the threshold voltage remains close to U _f. These results indicate that phenomena related to the charge transport should be taken into account in the analysis of the elastic deformations of ion-containing flexoelectric nematics.     

Continuum modelling of hybrid-aligned nematic liquid crystal cells: optical response and flexoelectricity-induced voltage shift

A continuum model is employed to study systematically the optical response of hybrid-aligned nematic (HAN) liquid crystal cells under the application of an external electric field. The influence of the flexoelectric effect is discussed for a large range of anchoring strengths at the homeotropic alignment layer. It is shown that the optical response of HAN cells is governed by a complicated interplay between the flexoelectric coefficient and homeotropic anchoring strength. In particular, the calculations reveal that, for weak homeotropic anchoring, the flexoelectric effect leads to a non-linear voltage shift of the optical transmittance as a function of flexoelectric coefficient, and gives rise to an asymmetry in the transmittance–voltage curve. Finally, a comparison of the continuum-model simulations with recent experimental observations indicates that both the flexoelectric coefficient and the anchoring strength of the nematic liquid crystal MBBA on a homeotropic polyimide alignment layer are significantly lower than previously reported.     

大分子引发剂分子量对接枝聚合物基体的PDLC电光性能的影响

以可逆加成-断裂链转移(RAFT)、引发转移终止(iniferter)活性自由基聚合相结合的方法,用一步法制备了不同分子量的大分子引发剂RAFT-PS-co-PCMSI(MI),并通过紫外光聚合诱导相分离法制备了以接枝聚合物为基体的聚合物分散液晶(PDLC)膜.研究了不同分子量的MI对PDLC的微观形貌,关闭状态透光率,阈值电压,饱和电压以及记忆效应等方面的影响.研究表明,降低PDLC中MI的分子量,会使得液晶微滴粒径增大,阈值电压(Vth)、饱和电压(Vsat)减小,记忆效应、关闭状态透光率升高.     

Electroclinic effects in a homogeneously aligned smectic A cell

The electroclinic effect, in a material having a first order S_A to S_C* transition, is studied using the half leaky guided mode geometry. Using an approximately 1 μm thick, homogeneously aligned cell, the voltage induced director twist is characterized at a few temperatures in the S_A phase. The mean field theory readily explains the data recorded at low fields where a linear dependence on voltage is found. However, at higher fields, an unexpected saturation occurs which is most likely caused by the influence of strong surface anchoring forces.     

Anchoring Properties of Nematic Liquid Crystals Studied Using the Attenuated Total Reflection Method

By using the attenuated total reflection method associated with the excitation of surface plasmons, the tilt angle of the liquid crystal director and its gradient at the surface are measured in a planar nematic cell as a function of the applied voltage. The surface anchoring anisotropy δπ of the liquid crystal and the surface elastic constant k_s, are found to be δπ = 0.288 erg/cm and k_s, = 9·12 × 10^-11 erg, respectively, when the boundary condition suggested by Barbero et al is used. The theoretical and experimental values obtained with this boundary condition and that of Mada are discussed. The results show that the boundary condition proposed by Barbero et al is in better agreement with the experiment.     

Electro-optical effects of anchoring transition in polymer dispersed liquid crystal films

Two groups of polymer dispersed liquid crystal films have been studied, one with a fixed cell thickness but varying liquid crystal (LC) concentrations and the other with a fixed LC concentration but varying cell thicknesses. A sudden decrease in transmittance with increasing temperature was observed for films whose LC domain sizes were comparable to their cell thicknesses. In particular, spontaneous alignment of LC directors was observed below ∼20°C when LC domains were formed spanning the space between upper and lower indium tin oxide-coated glass substrates. With increasing temperature, this axially aligned homeotropic configuration changed gradually into homogeneous configurations. We believe that the sudden decrease in transmittance originated from the anchoring transition at the glass substrates and polymer walls. In addition, it has been found that the intensity of ultra violet irradiation has a strong effect on the director configuration of LC domains, and that the cure temperature affects the anchoring transition temperature significantly.     

Viewing angle characteristics of a homogeneously aligned two-domain liquid crystal cell with an inter-digitated electrode

The in-plane switching (IPS) mode in liquid crystal displays is known to exhibit a wide viewing angle. However, since the LC director rotates in one direction in the plane, devices with a single domain exhibit both a colour shift depending on the viewing angle, and greyscale inversion at specific angles especially at low grey levels. This has been improved by wedge shaped electrodes so that fields in two directions exist inside a pixel, causing the LC molecules to rotate in opposite directions to compensate each other; this acts as a virtual two domains structure. Nevertheless, the colour shift still exists to some extent, especially at low grey levels. In this paper, we propose a realistic two-domain IPS mode that exhibits a minimized colour shift at all grey levels on changing the viewing direction. In this device, the LC molecules are initially aligned in two directions orthogonal to each other, and two field directions exist perpendicular to each other. We have performed device simulations with respect to viewing angle characteristics, and found that IPS devices with a real two-domain structure reduce the variation of the retardation more effectively, when the viewing direction changes.     

Low-voltage blue-phase liquid crystal display with diamond-shape electrodes

We propose a new electrode configuration, called diamond-shape in-plane switching, to lower the operation voltage of polymer-stabilised blue-phase liquid crystal (BPLC) displays (BPLCDs). The electrode structure is modified from conventional protruded IPS, where the strip protrusion is changed to diamond shape. By optimising the electrode gap and diamond length, we are able to obtain peak transmittance over 75% at 15 V. It enables single thin-film transistor (TFT) driving, and more importantly, this is based on an industrially proven BPLC material. That means good long-term stability, adequate TFT charging time for high-resolution displays and sub-millisecond response time and acceptable voltage-holding ratio for field sequential displays can be achieved simultaneously. Our device design helps accelerate the emergence of the long-awaited BPLCDs.