Crystal structure and conduction of BICUTIVOX

Existence boundaries, structure, and transport parameters were studied for Bi₄V_{2 ? x} Cu _x/2Ti _x/2O_{11 ? x} solid solutions. Doping levels within x = 0.025–0.15 distort the C2/m crystal lattice (this lattice is characteristic of individual the Bi₄V₂O₁₁ phase) and lowers its symmetry to triclinic. The solid solutions with 0.25 ≤ x ≤ 0.30 crystallize in tetragonal space group I4/mmm. High-temperature X-ray diffraction and dilatometry measurements for Bi₄V_{2 ? x} Cu _x/2Ti _x/2O_{11 ? x} (x ≤ 0.35) solid solutions verified the existence of three structural varieties within 298–1023 K. Electrical conductivity of BICUTIVOX was studied by impedance spectroscopy as a function of temperature, composition, and oxygen partial pressure. Equivalent circuits of cells were analyzed. Features of electrical conductivity versus temperature for the structural varieties are noted. Above 873 K, the solid solutions samples with x = 0.05 have the highest conductivity. At lower temperatures, higher conductivities are in the solid solutions that retain the γ phase in the low-temperature region. The dominant oxygen-ion conduction mechanism was discovered in the solid solutions.     

Preparation,structure, and charge transport characteristics of BIFEVOX ultrafine powders

Existence boundaries, structure, and transport parameters of ultrafine powders were studied in Bi₄V_{2 ? x} Fe _x O_{11 ? x} (BIFEVOX) solid solutions. The details of synthesis of the solid solutions via liquid precursors are analyzed comparatively. In general, BIFEVOX formation via liquid precursors is similar to phase formation in solid-phase synthesis. With low iron levels (x = 0.05–0.1), solid solutions are formed in the monoclinic α phase (space group C2/m) The compositions with x = 0.125 and 0.15 are mixtures of α- and β phases. In the range 0.2 < x < 0.7, the Bi₄V_{2 ? x} Fe _x O_{11 ? x} solid solution has the structure of the γ phase of Bi₄V₂O₁₁ (space group I4/mmm). The β phase in the system in question has a very narrow existence range in the vicinity of x = 0.175. The average particle sizes of the powders prepared by various methods are within 0.5–3 μm. In the powders prepared via liquid precursors, however, the distribution peak shifts toward smaller sizes, to 0.3–1 μm. Mechanical activation conserves the structure of the γ phase of BIFEVOX, and unit cell parameters change only insignificantly; however, the crystal lattice is slightly distorted. The electrical conductivity of BIFEVOX was studied as a function of temperature, preparation technology, and composition using impedance spectroscopy. Equivalent circuits of cells were analyzed. The conductivity of samples prepared by solution technology is always higher than for samples prepared by the solid-phase process. Features of electrical conductivity versus temperature for various phases are noted. All transitions on the conductivity curves match the features of linear thermal expansion curves. Compositions with doping levels x= 0.1–0.3 have the highest total conductivities.     

Synthesis processes and transport properties of solid solutions in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

The results of studies of solid solutions with the overall composition of Bi₄V_{2 ? x} Ge _x O_{11 ? δ} and Bi₄Ge_{3 ? x} V _x O_{12 + δ} are presented. The process of phase formation are studied during the synthesis of solid solution using the ceramic method and through liquid precursors. Crystallochemical parameters of the obtained compounds are determined. The size distribution of the particles is studied. Conductivity of annealed of polycrystalline samples as a function of temperature and composition is studied using the impedance spectroscopy method. The shape of impedance complex plane plots of the samples obtained in different ways is studied and analyzed.     

High-pressure defect phase Tm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

Perovskite-related oxide Tm _x Cu₃V₄O₁₂ (space group Im \(\bar 3\), Z = 2, a = 7.262?7.273 Å) with vacancies in the cationic sublattice has been prepared for the first time under barothermal conditions (p = 7.0?9.0 GPa, T = 900?1100°C). Electric resistivity (10–300 K) and magnetic susceptibility (0–300 K) were studied as a function of temperature. Tm _x Cu₃V₄O₁₂ is shown to have a metallic conductivity and paramagnetism.     

Alkali (alkaline-earth) metal,aluminum, and titanium complex orthophosphates: Synthesis and characterization

Phase formation in the A_{1 + x} Al _x Ti_{2 ? x} P₃O₁₂ (A = Li, Na, K, Rb, or Cs; 0 ≤ x ≤ 2.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} P₃O₁₂ (B = Mg, Ca, Sr, or Ba; 0 ≤ x ≤ 2.0) systems was studied using X-ray powder diffraction, electron probe microanalysis, and IR spectroscopy. The following double and triple orthophosphates were found to exist: A_{1 + x} Al _x Ti_{2 ? x} (PO₄)₃ with A = Li (0 ≤ x ≤ 0.3), Na (0 ≤ x ≤ 1.0), K (x = 0, 1.0, or 2.0), Rb (x = 0, 1.0, or 2.0), or Cs (0 ≤ x ≤ 1.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} (PO₄)₃ with B = Mg and Ba (x = 0), Ca and Sr (0 ≤ x ≤ 0.2). These orthophosphates crystallize in the structure types of kosnarite, langbeinite, cesium titanium arsenate, potassium aluminum phosphate, or rubidium aluminum phosphate. Their crystal parameters were calculated. For CsTi₂(PO₄)₃ (x = 0), Rietveld refinement was carried out: space group Ia \(\bar 3\) d, Z = 32, a = 19.909(5) Å, V = 7892(1) ų. This compound has a framework structure. The framework is built of TiO₆ octahedra and PO₄ tetrahedra; eight- and 12-coordinated Cs⁺ cations populate interstices.     

BIFEVOX Composites: Manufacture and Characterization

Design of composites is a way to improve the quality of solid electrolytes. By mechanically mixing and annealing substituted bismuth vanadate with nanosized aluminum, bismuth, and zirconium binary oxides, we obtained heterogeneous materials Bi₄V_1.7Fe_0.3O_{11 – δ}/xAl₂O₃, Bi₄V_1.7Fe_0.3O_{11 – δ}/xBi₂O₃, and Bi₄V_1.7Fe_0.3O_{11 – δ}/xYSZ. The investigation tools were X-ray powder diffraction and electron microscopy with energy-dispersive microanalysis. The composition of materials was studied, the non-interaction of components was elucidated in the aluminum oxide and zirconium oxide composite series, and a nonuniform distribution of nanopowder particles across the surfaces and cleaves of sinters was discovered. The bismuth atoms from bismuth oxide were shown to be capable of incorporating into the Bi₄Fe_0.3V_1.7O_{11 – δ} structure. The charge transport characteristics of the materials were studied by impedance spectroscopy. No changes were observed in logσ–10³/T trends in composites with various binary oxides and various oxide contents. An increase in binary oxide concentration was shown to give rise to an insignificant decay in electrical conductivity.     

Substituted bismuth vanadates and chromates: New aspects

The work is devoted to the synthesis and attestation of a number of substituted vanadates and chromates of bismuth. For bismuth vanadates of the BIMEVOX family, the homogeneity regions of the Bi₄V_{2 – x}Cr _x O_{11 ± d} solid solutions have been refined, the features of the structure change of the compounds with increasing chromium content and changing temperature have been noted, and the powders and ceramics have been studied by electron microscopy. For the first time, as an impurity, an individually substituted bismuth chromate of the composition Substituted bismuth chromate of the Bi₁₃Cr_{5 – y}V _y O_{34.5 – d} (y = 0.95 ± 0.05) composition has been detected for the first time as an impurity and synthesized as an individual compound, which has been characterized by X-ray diffraction, electron microscopy, chemical analysis, and photoelectron spectroscopy data; its homogeneity range has been determined, and electroconductive characteristics have been studied.     

Structure and electrical conductivity of cobalt-doped Bi<Subscript>26</Subscript>Mo<Subscript>10</Subscript>O<Subscript>69</Subscript>

The existence boundaries, structures, and transport parameters of Bi_{1 ? x} Co _x [Bi₁₂O₁₄]Mo₅O_{20 ± δ} and Bi[Bi₁₂O₁₄]Mo_{5 ? y} Co _y O_{20 ± δ} solid solutions, which have a unique columnar structure, were studied. Electrical conductivity in these solid solutions was studied by impedance spectroscopy.     

Phase composition,formation parameters,and morphology of precipitates in the LiVO<Subscript>4</Subscript>-VOSO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

The phase and chemical compositions of the precipitates formed in the LiVO₃-VOSO₄-H₂O system at initial pH within 1 ≤ pH ≤ 4 and 90°C were studied. The following phases were prepared: an α phase Li_1.4(VO)_1.3[H₂V₁₀O₂₈] · nH₂O and a β phase Li_{0.6 ? x} H_{1.4 + x} [V₁₂O_{31 ? y/2}] · nH₂O (0 ≤ x ≤ 0.5, 1.3 ≤ y ≤ 2.0) with a layered structure. Li_0.4V₂O₅ · H₂O nanorods with the interlayer distance 10.30 ± 0.08 Å were synthesized at 180°C in an autoclave. The morphology, IR spectra, and main formation processes for these polyvanadates were studied.     

Structure and properties of solid solutions based on bismuth niobate Bi<Subscript>3</Subscript>NbO<Subscript>7</Subscript>

Solid solutions Bi₃Nb_1–yW_yO_{7 ± δ}, Bi₃Nb_1–yV_yO_{7 ± δ}, Bi₃Nb_1–yFe_yO_{7 ± δ} (y = 0.1–0.5; Δy = 0.1), and Bi_3–xY_xNb_1–yW_yO_{7 ± δ} (x = 0.05, 0.1; y = 0–0.3; Δy = 0.1) have been studied. The homogeneity ranges of the solid solutions and crystal-chemical parameters have been determined by means of X-ray powder diffraction. The electrical conductivity of sintered samples has been studied by impedance spectroscopy. The joint introduction of yttrium and tungsten into the niobium sublattice does not lead to an increase in the conductivity of solid solutions, and the change of the dopant type has no noticeable effect on this conductivity.     

High-pressure nonstoichiometric phase Sm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

Perovskite-like nonstoichiometric oxide Sm _x Cu₃V₄O₁₂ (space group Im \(\bar 3\), Z = 2, a = 7.276?7.314 Å) with cationic vacancies and a homogeneity region was prepared barothermally (p = 6.0?9.0 GPa, T = 700?1100°C) for the first time. Structural and isotropic thermal parameters, as well as bond lengths and bond angles, were determined. The compound has metal-type conductivity and paramagnetic properties.     

Interactions in the Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript>-Ti<Subscript>2</Subscript>O<Subscript>3</Subscript> System

Interactions in the Al₂TiO₅-Ti₂O₃ system were studied and the regions of existence of Al_2?2xTi _2x ³⁺ Ti⁴⁺O₅ solid solutions with a pseudobrookite structure were determined.     

Sulfonic acid-functionalized titanomagnetite nanoparticles as recyclable heterogeneous acid catalyst for one-pot solvent-free synthesis of 3,4-dihydropyrimidin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones/thiones

Sulfonic acid-functionalized titanomagnetite (Fe_3?x Ti _x O₄@SO₃H) nanoparticles were prepared by grafting sulfonic acid groups on Fe_3?x Ti _x O₄ nanoparticles. This new heterogeneous acid nanocatalyst demonstrated an efficient catalytic performance in the one-pot synthesis of dihydropyrimidin-2(1H)-one/thione derivatives under solvent-free conditions with high yields. The nanocatalyst could easily be separated from the reaction mixture simply by using an external magnet, recycled and reused for several times with no significant loss of catalytic activity. These nanoparticles were characterized by different physicochemical techniques, such as Fourier transform infrared, scanning electron microscopy, energy-dispersive X-ray analysis, thermogravimetric and vibrating sample magnetometer (VSM) analyses.     

XPS spectra of vanadium-doped disulfides CuCrS<Subscript>2</Subscript>

The charged state of atoms in layered cation-substituted disulfides CuCr_1?x V _x S₂ (x = 0?0.4) was studied using X-ray photoelectron spectroscopy. The study was performed with polycrystalline powder and ceramic samples of chromium-copper disulfides. CuCr_1?x V _x S₂ samples were shown to comprise differently charged atoms of chromium, copper and vanadium, the charged state of which varies with the concentration of vanadium cations (x).     

Thermodynamic description of phases in the neodymium-barium-copper-oxygen system

The available experimental data were used to construct thermodynamic models of Nd-Ba-Cu-O system phases. The coordinates of the nonvariant points of this system were determined, and the phase diagram for the Nd_{1 + x} Ba_{2 ? x} Cu₃O_{6 + z} (x = 10^?4) compound was calculated.     

Formation of Nd<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Bi<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> Nanocrystals under Conditions of Glycine-Nitrate Synthesis

Nd_1–xBi_xFeO₃ nanocrystals with crystallite size 30?60 nm have been prepared under conditions of glycine–nitrate burning. Single-phase Nd_1–xBi_xFeO₃ nanocrystals are formed over the entire studied concentrations range if the glycine–nitrate synthesis is performed in excess of the oxidizer. Under these conditions, a continuous range of the Nd_1–xBi_xFeO₃ solid solutions (0 ≤ х ≤ 0.75) crystallized in the rhombic system (space group Pbnm) are formed without crystallization of the burning intermediates. The Nd_1–xBi_xFeO₃ solid solutions (х = 0.775, 0.8) crystallize in the rhombic system (space group Pbаm).     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

New process for preparing aqueous solutions of Mo-V-phosphoric heteropoly acids

A new ecofriendly process is proposed for the synthesis of aqueous solutions of Mo-V-phosphoric Keggin heteropoly acids H_{3 + x} PV _x Mo_{12 ? x} O₄₀(HPA_?x ). First, V₂O₅ is dissolved in cooled H₂O₂ to form peroxyvanadium compounds, which then spontaneously decompose to yield the H₆V₁₀O₂₈ solution. The latter is stabilized by the addition of H₃PO₄ to yield an H₉PV₁₄O₄₂ solution. This solution is gradually added to a boiling H₃PO₄ + MoO₃ aqueous suspension. This suspension is gradually evaporated that is followed by dissolution of MoO₃ to produce an HPA_?x solution. This process is reliable and almost non-waste and is promising for preparing HPA_?x solutions with x = 2–6 on pilot and large scales.     

High-pressure defect phase Nd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

A perovskite-like oxide Nd _x Cu₃V₄O₁₂ (space group Im \(\bar 3\) Z = 2, a = 7.278–7.322 Å) with cationic vacancies was prepared for the first time under triaxial compression of p = 6.0–9.0 GPa at 700–1300°C. The compound has a metal-type conductivity, paramagnetic properties, and a phase transition.     

High-pressure defect phase La<Subscript>x</Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

Perovskite-like nonstoichiometric oxide La _x Cu₃V₄O₁₂ (space group Im \(\bar 3\), Z = 2, a = 7.313–7.354 Å) with cation-site vacancies has been prepared for the first time at high pressures (p = 6.0–8.0 GPa) and high temperatures (T = 700–1100°C). The compound has metal-type conductivity and paramagnetic properties, and undergoes a phase transition.