Complex Formation of 1,10-Dibenzyl-1,10-diaza-18-crown-6 with Ni2+, Cu2+, Ag+ and Cd2+ Metal Cations in Acetonitrile–dimethylformamide Binary Solutions

Conductance measurements are reported for nickel(II), cupper(II), silver(I) and cadmium(II), salts in acetonitrile (AN)–dimethylformamide (DMF) binary solvents containing macrocyclic ligand, 1,10-dibenzyl-1,10-diaza-18-crown-6 (DBDA18C6) at different temperatures. The changes in molar conductance caused by addition of DBDA18C6 to solutions were analyzed by non-linear least squares to give stability constants of 1:1 metal cation–DBDA18C6 complexes. The results show that the stabilities of the complexes are sensitive to solvent composition and in some cases the sequence of stabilities is changed with changing the composition of the mixed solvents. The values of thermodynamic quantities (ΔH°c and ΔS°c) for formation of DBDA18C6-Ni²⁺, DBDA18C6-Cu²⁺, DBDA18C6-Ag⁺ and DBDA18C6-Cd²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that the values of ΔH°c and ΔS°c for these complexes are sensitive to the nature and composition of AN–DMF binary solutions, but they do not vary monotonically with the solvent composition.     

A Polarographic Study of Tl+, Pb2+ and Cd2+ Complexes with Aza-18-crown-6 and Dibenzopyridino-18-crown-6 in some Binary Mixed Non-aqueous Solvents

The complexation of Tl⁺, Pb²⁺and Cd²⁺ cations by macrocyclic ligands, aza-18-crown-6 (L1) and dibenzopyridino-18-crown-6 (L2) was studied in some binary mixtures of methanol (MeOH), n-propanol (n-PrOH), nitromethane (NM) and acetonitrile (AN) with dimethylformamide (DMF) at 22 °C using DC (direct current) and differential pulse polarographic techniques (DPP). The stoichiometry and stability constants of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In all of the solvent systems, the stability of the resulting 1:1 complexes was found to be L1 > L2. The selectivity order of the L2 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺ and the selectivity of the L1 ligand for Pb²⁺ ion was greater than that of Tl⁺ ion. The results show that the stability of the complexes depends on the nature and composition of the mixed solvents. There is an inverse relationship between the stability constants of the complexes and the amount of dimethylformamide in the mixed solvent systems.     

Novel fluorimetric bulk optode membrane based on 5,8-bis((5′-chloro-8′-hydroxy-7′-quinolinyl)methyl)-2,11-dithia-5,8-diaza-2,6-pyridinophane for selective detection of lead(II) ions

A novel fluorescence chemical sensor for the highly sensitive and selective determination of Pb²⁺ ions in aqueous solutions is described. The preliminary potentiometric and spectrofluorimetric complexation studies in solution revealed that the lipophilic ligand 5,8-bis((5′-chloro-8′-hydroxy-7′-quinolinyl)methyl)-2,11-dithia-5,8-diaza-2,6-pyridinophane (L2) forms a highly stable and selective [PbL2]²⁺ and [Pb(L2)₂]²⁺ complexes which results in a strong fluorescence quenching of the ligand. Thus, a novel fluorescence Pb²⁺ sensing system was prepared by incorporating L2 as a neutral lead-selective fluoroionophore in the plasticized PVC membrane containing tetrakis(p-chlorophenyl) borate as a liphophilic anionic additive. The response of the sensor is based on the strong selective fluorescence quenching of L2 by Pb²⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range of 3.0 × 10⁻⁷ to 2.5 × 10⁻² M with a relatively fast response time of less than 5 min. In addition to high stability, reversibility and reproducibility, the sensor shows a unique selectivity towards Pb²⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was successfully applied to the determination of lead in plastic toys and tap water samples.     

A novel method for the simple and simultaneous preconcentration of Pb2+, Cu2+ and Zn2+ ions with aid of diethylenetriamine functionalized SBA-15 nanoporous silica compound

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺, Cu²⁺ and Zn²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with diethylenetriamine groups and flame atomic absorption spectrometry (FAAS) is presented. The preconcentration factor of the method is 100 and detection limit of the technique is 5.5?ng?mL^?1 and 1.4?ng?mL^?1 and 0.1?ng?mL^?1 for Pb²⁺, Cu²⁺ and Zn²⁺ respectively. The time and the optimum amount of the sorbent, pH and minimum amount of acid for stripping of ions from functionalized SBA-15 were tested. The maximum capacity the functionalized SBA-15 was found to be 183.0 (±1.9) µg, 156.0 (±1.5) µg and 80.0 (±1.6) µg of Pb²⁺, Cu²⁺ and Zn²⁺/mg functionalized SBA-15, respectively.     

Effect of Solvent on Competitive Bulk Membrane Transport of Transition and Post Transition Metal Cations Using Decyl-18-crown-6

A series of competitive metal ion transport experiments have been performed. Each involved transport from an aqueous source phase across an organic membrane phase into an aqueous receiving phase. The source phase contained equimolar concentrations of cobalt(II), nickel(II), cupper(II), zinc(II), cadmium(II), silver(I) and lead(II) metal cations. The membrane phase incorporated ionophore, decyl-18-crown-6. The membrane solvents include: chloroform, dichloromethane, 1,2-dichloroethane, nitrobenzene and chloroform–nitrobenzene binary solvents. A good transport efficiency and selectivity of Pb²⁺ transport from aqueous solutions are observed in this investigation. The selectivity order for competitive bulk liquid membrane transport of the studied transition and post transition metal cations through chloroform is: Pb²⁺>Co²⁺>Ni²⁺>Ag⁺>Cd²⁺, but in the case of dichloromethane, 1,2-dichloroethane and nitrobenzene as liquid membranes, the selectivity sequences were found to be: Pb²⁺>Co²⁺>Cd²⁺>Cu²⁺>Ag⁺>Ni²⁺>Zn²⁺, Pb²⁺>Co²⁺>Ag⁺>Ni²⁺>Zn²⁺ and Pb²⁺>Co²⁺>Ni²⁺>Zn²⁺>Cd²⁺>Ag⁺, respectively. The transport rate of the metal cations in chloroform–nitrobenzene binary solvents is sensitive to the solvent composition. The transport processes were studied in absence and presence of the stearic acid and the results show that the sequence of selectivities and ion transport rates change in the presence of stearic acid.     

A Conductometric Study of Complexation Reactions Between Dibenzo-18-Crown-6 (DB18C6) with Cu2+, Zn2+, Tl+ and Cd2+ Metal Cations in Dimethylsulfoxide–Ethylacetate Binary Mixtures

The complex formation between Cu²⁺, Zn²⁺, Tl⁺ and Cd²⁺ metal cations with macrocyclic ligand, dibenzo- 18-crown-6 (DB18C6) was studied in dimethylsulfoxide (DMSO)–ethylacetate (EtOAc) binary systems at different temperatures using conductometric method. In all cases, DB18C6 forms 1:1 complexes with these metal cations. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, Genplot. The non-linear behaviour which was observed for variations of log K _f of the complexes versus the composition of the mixed solvent was discussed in terms of changing the chemical and physical properties of the constituent solvents when they mix with one another and, therefore, changing the solvation capacities of the metal cations, crown ether molecules and even the resulting complexes with changing the mixed solvent composition. The results show that the selectivity order of DB18C6 for the metal cations in pure ethylacetate and pure dimethylsulfoxide is: Tl⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ but the selectivity order is changed with the composition of the mixed solvents. The values of enthalpy changes (ΔH°_C) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in standard enthalpy (ΔS°_C) were calculated from the relationship: ΔG°_C,298.15=ΔH°_C − 298.15 ΔS°_C. The obtained results show that in most cases, the complexes are enthalpy stabilized, but entropy destabilized and the values of ΔH°_C and ΔS°_C depend strongly on the nature of the medium.     

A highly selective visual and fluorescent sensor for Pb2+ and Zn2+ and crystal structure of Cu2+ complex based-on a novel single-armed Salamo-type bisoxime

A novel single-armed Salamo-type bisoximes (H₄L) has been designed and synthesised. An obvious colour change from yellow (H₄L) to pale pink (HL-Pb²⁺) which can be visually observed by the naked eye in visible light. H₄L can act as a fluorescent sensor for ratiometric recognition of Zn²⁺ with high selectivity and sensitivity. Crystallographic data of the [Cu(HL)(μ-OAc)Cu] reveals that the two Cu²⁺ ions are both penta-coordinated with square pyramidal geometries, and forms a 2D supramolecular plane structure by hydrogen bonding interactions.     

A Polarographic Study of Tl + , Pb 2 and Cd 2+ Complexes with Dicyclohexano-18-Crown-6 in Some Binary Mixed Solvents

The complexes of Tl⁺, Pb²⁺ and Cd²⁺ cations with the macrocyclic ligand, dicyclohexano-18-crown-6\linebreak(DC18C6) were studied in water/methanol (H₂₊O/MeOH), water/1-propanol (H₂₊O/1-PrOH), water/acetonitrile (H₂₊O/AN), water/dimethylformamide (H₂₊O/DMF), dimethylformamide/acetonitrile (DMF/AN), dimethylformamide/methanol (DMF/MeOH), dimethylformamide/1-propanol (DMF/1-PrOH) and dimethylformamide/nitromethane (DMF/NM) mixed solvents at 22 °C using differential pulse polarography (DPP), square wave polarography and conductometry. In general, the stability of the complexes was found to decrease with increasing concentration of water in aqueous/non-aqueous mixed solvents with an inverse relationship between the stability constants of the complexes and the concentration of DMF in non-aqueous mixed solvents. The results show that the change in stability of DC18C6.Tl⁺, vs the composition of solvent in DMF/AN and DMF/NM mixed solvents is apparently different from that in DMF/MeOH and DMF/1-PrOH mixed solvents. While the variation of stability constants of the DC18C6.Tl⁺ and DC18C6.Pb²⁺ complexes vs the composition of H₂₊O/AN mixed solvents is monotonic, an anomalous behavior was observed for variations of log K_f vs the composition of H₂₊O/1-PrOH and H₂₊O/MeOH mixed solvents. The selectivity order of the DC18C6 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺.     

Study of Complex Formation Between Dicyclohexano-18-Crown-6 (DCH18C6) with Mg 2+, Ca2+, Sr 2+, and Ba2+ Cations in Methanol–Water Binary Mixtures Using Conductometric Method

The complexation reactions between Mg²⁺,Ca²⁺,Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, dicyclohexano-18-crown-6 (DCH18C6) were studied in methanol (MeOH)–water (H₂O) binary mixtures at different temperatures using conductometric method . In all cases, DCH18C6 forms 1:1 complexes with these metal cations. The values of stability constants of complexes which were obtained from conductometric data show that the stability of complexes is affected by the nature and composition of the mixed solvents. While the variation of stability constants of DCH18C6-Sr ²⁺ and DCH18C6-Ba²⁺versus the composition of MeOH–H₂O mixed solvents is monotonic, an anomalous behavior was observed for variations of stability constants of DCH18C6-Mg²⁺ and DCH18C6-Ca²⁺ versus the composition of the mixed solvents. The values of thermodynamic parameters (ΔH_c°, ΔS_c°) for complexation reactions were obtained from temperature dependence of formation constants of complexes using the van’t Hoff plots. The results show that in most cases, the complexation reactions are enthalpy stabilized but entropy destabilized and the values of thermodynamic parameters are influenced by the nature and composition of the mixed solvents. The obtained results show that the order of selectivity of DCH18C6 ligand for metal cations in different concentrations of methanol in MeOH–H₂O binary system is: Ba²⁺>Sr²⁺>Ca²⁺> Mg²⁺.     

Synthesis and spectroscopic studies of some new metal carbonyl derivatives of 1-(2-pyridylazo)-2-naphthol

Interaction of 1-(2-pyridylazo)-2-naphthol (PAN) with [Mo(CO)₆] in air resulted in formation of the tricarbonyl oxo-complex [Mo(O)(CO)₃(PAN)], 1. The dicarbonyl complex [Ru(CO)₂(PAN)], 3, was obtained from the reaction of [Ru₃(CO)₁₂] with PAN. In presence of triphenyl phosphine (PPh₃), the reaction of PAN with either Mo(CO)₆ or Ru₃(CO)₁₂ gave [Mo(CO)₃(PAN)(PPh₃)], 2, and [Ru(CO)₂(PAN)(PPh₃)], 4. All the complexes were characterized by elemental analysis, mass spectrometry, IR, and NMR spectroscopy. The thermal properties of the complexes were also investigated by thermogravimetry.     

Construction of a new Cu2+ coated wire ion selective electrode based on 2-((2-(2-(2-(2-hydroxy-5-methoxybenzylidene amino)phenyl)disufanyl)phenylimino)methyl)-4-methoxyphenol Schiff base

In this article a new coated platinum Cu²⁺ ion selective electrode based on 2-((2-(2-(2-(2-hydroxy-5-methoxybenzylideneamino)phenyl)disufanyl)phenylimino) methyl)-4-methoxyphenol Schiff base (L₁) as a new ionophore is described. This sensor has a wide linear range of concentration (1.2 × 10⁻⁷-1.0 × 10⁻¹ mol L⁻¹) and a low detection limit of 9.8 × 10⁻⁸ mol L⁻¹of Cu(NO₃)₂. It has a Nernstian response with slope of 29.54 ± 1.62 mV decade⁻¹ and it is applicable in the pH range of 4.0-6.0 without any divergence in potentioal. The coated electrode has a short response time of approximately 9 s and is stable at least for 3.5 months. The electrode shows a good selectivity for Cu²⁺ ion toward a wide variety of metal ions. The proposed sensor was successfully applied for the determination of Cu²⁺ ion in different real and environmental samples and as indicator electrode for potentiometric titration of Cu²⁺ ion with EDTA.     

Conductance Studies on Complex Formation Between Aza-18-Crown-6 with Ag+, Hg2+ and Pb2+ Cations in DMSO–H2O Binary Solutions

The complexation reactions between Ag⁺, Hg²⁺ and Pb²⁺ metal cations with aza-18-crown-6 (A18C6) were studied in dimethylsulfoxide (DMSO)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes in most cases is 1:1(ML), but in some cases 1:2 (ML₂) complexes are formed in solutions. A non-linear behaviour was observed for the variation of log K _f of the complexes vs. the composition of the binary mixed solvents. Selectivity of A18C6 for Ag⁺, Hg²⁺ and Pb²⁺ cations is sensitive to the solvent composition and in some cases and in certain compositions of the mixed solvent systems, the selectivity order is changed. The values of thermodynamic parameters (ΔH _c^o, ΔS _c^o) for formation of A18C6–Ag⁺, A18C6–Hg²⁺ and A18C6–Pb²⁺ complexes in DMSO–H₂O binary systems were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Development of a PVC-membrane ion-selective bulk optode,for UO<Stack><Subscript>2</Subscript><Superscript>2+</Superscript></Stack> ion,based on tri-<Emphasis Type="Italic">n</Emphasis>-octylphosphine oxide and dibenzoylmethane

A novel uranyl ion-selective bulk optode membrane, incorporating tri-n-octylphosphine oxide for cation recognition and a lipophilic chromoionophore dibenzoylmethane, has been prepared. The PVC membrane composition was optimized to result in the widest working concentration range. The response range of the proposed optode is 4.1×10^–6 to 2.0×10^–4 mol L^–1 UO₂²⁺. The probe works at pH 4.0. Ion interference is low and selectivity, reproducibility, and stability are good.     

Spectrophotometric study of complex formations between 1-(2-pyridylazo)-2-naphthol (PAN) and some metal ions in organic solvents and the determination of thermodynamic parameters

The complexation reactions between Ni(2+), Co(2+) and Zn(2+) metal ions with PAN in methanol (MeOH), acetonitrile (AN) and dimethyl sulfoxide (DMSO) were studied using a spectrophotometric method. The stability constants of the resulting complexes were determined from computer fitting absorbance mole-ratio data. The results revealed that the stability constants of complexes are varying in order of Ni(2+)相似文献   

Examining the binding mechanism of 3,4-dihydro-3-(2-oxo-2-phenylethylidene)-quinoxalin-2(1H)-one and its fragments to Cu2+

The structure and stoichiometries of the complexes that could be formed between Cu²⁺ and 3,4-dihydro-3-(2-oxo-2-phenylethylidene)-quinoxalin-2(1H)-one (1) were investigated by various spectral techniques such as IR, fluorescence, UV–vis and electron paramagnetic resonance. The results suggest that initially 3?:?1 and 2?:?1 (1/Cu²⁺) complexes are formed at low Cu²⁺ concentration and upon adding more Cu²⁺, 1?:?1 (preferred) and 1?:?2 complexes are generated. Since 1 possesses two possible binding sites, further exploration was done by testing the binding ability of Cu²⁺ to fragments of 1, namely β-enaminoketone derivatives (2–3) and quinoxaline-2-one (4), and by executing calculations of thermodynamic parameters of the reaction between 1 and Cu²⁺ in ethanol, optimized geometries of the possible complexes, and estimation of stability constants at various stoichiometries. Consequently, a step-by-step binding mechanism is suggested for formation of various complexes between 1 and Cu²⁺.     

Comparison of Partial Least Squares Regression and H-Point Standard Addition Method for Simultaneous Spectrophotometric Determination of Zinc, Cobalt and Nickel by 1-(2-Pyridylazo)2-Naphthol in Micellar Media

Simultaneous spectrophotometric methods are described for the determination of Zn²⁺, Co²⁺ and Ni²⁺ by 1-(2-pyridylazo)2-naphthol (PAN) in micellar media, using absorbance correction-H-point standard addition method (HPSAM) and partial least squares (PLS) regression. The ligand and its metal complexes, i.e. Zn²⁺-PAN, Co²⁺-PAN and Ni²⁺-PAN, were made water-soluble by the neutral surfactant Triton X-100, and therefore extraction with organic solvents was no longer required. Formation of all of these complexes was complete within 10min at pH 9.2. The linear range was 0.1–1.5mgL^–1 for Zn²⁺, 0.1–2.0mgL^–1 for Co²⁺ and 0.1–2.0mgL^–1 for Ni²⁺. The relative standard deviation (RSD) for the simultaneous determination of 0.50mgL^–1 each of Zn²⁺, Ni²⁺ and Co²⁺ by applying the H-point standard addition method was 2.55%, 2.04% and 3.70%, respectively. The total relative standard error for applying the PLS method to 9 synthetic samples in the linear ranges of these metals was 1.8%. Interference effects of common anions and cations were studied, and both methods were applied to the simultaneous determination of Zn²⁺, Co²⁺ and Ni²⁺ in alloy samples.     

A Thermodynamic Study Between 18-Crown-6 with Mg2+, Ca2+, Sr2+and Ba2+ Cations in Water–Methanol and Water–Ethanol Binary Mixtures Using The Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations with the macrocyclic ligand, 18-Crown-6 (l8C6) in water–methanol (MeOH) binary systems as well as the complexation reactions between Ca²⁺ and Sr²⁺ cations with 18C6 in water–ethanol (EtOH) binary mixtures have been studied at different temperatures using conductometric method. The conductance data show that the stoichiometry of all the complexes is 1:1. It was found that the stability of 18C6 complexes with Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations is sensitive to solvent composition and in all cases, a non-linear behaviour was observed for the variation of log K _f of the complexes versus the composition of the mixed solvents. In some cases, the stability order is changed with changing the composition of the mixed solvents. The selectivity order of 18C6 for the metal cations in pure methanol is: Ba²⁺ > Sr²⁺ > Ca²⁺ > Mg²⁺. The values of thermodynamic parameters (Δ H _c ° and Δ S _c °) for formation of 18C6–Mg²⁺, 18C6–Ca²⁺, 18C6–Sr²⁺ and 18C6–Ba²⁺complexes were obtained from temperature dependence of the stability constants. The obtained results show that the values of (Δ H _c ° and Δ S _c °) for formation of these complexes are quite sensitive to the nature and composition of the mixed solvent, but they do not vary monotonically with the solvent composition.This revised version was published online in July 2005 with a corrected issue number.     

Synthesis and structure of supramolecular complexes between 1-alkynyl(phenyl)(tetrafluoroborato)-λ-iodanes and 18-crown-6

Slow evaporation of a solution of 1-decynyl(phenyl)(tetrafluoroborato)-λ³-iodane and 18-crown-6 in dichloromethane-diethyl ether-hexane gave a supramolecular 1:1 complex, while 3,3-dimethyl-1-butynyl- and phenylethynyl(phenyl)(tetrafluoroborato)-λ³-iodanes afforded 2:1 complexes. Complexation with 18-crown-6 increased the thermal stability of the phenylethynyl-λ³-iodane. Solid state and solution structures of these complexes were examined by single crystal X-ray analyses, ¹H and ¹³C NMR spectra, and cold-spray ionization MS. Binding constants were measured by ¹H NMR titrations.     

Sr(NO3)2·DCH18C6配合物晶体结构与辐射稳定性

二环己基-18-冠-6（DCH18C6）可以有效地从高放废液中分离⁹⁰Sr,对于减小放射性废物的危害和实现高放废物的减容有重要意义. 由于在实际应用中DCH18C6处于射线照射下,其结构可能会被破坏并引起络合能力的变化,因此有必要对该配合物的辐射稳定性进行研究. 本文合成了Sr（NO₃）₂·DCH18C6 配合物晶体,并通过单晶X射线衍射（XRD）与扩展X射线吸收精细结构谱（EXAFS）等方法进行了表征,确定Sr²⁺与周围氧原子的配位数为10,Sr―O平均键长约为0.268 nm/0.266 nm（XRD/EXAFS）. 配位原子来自DCH18C6 的六个氧原子以及两个作为双齿配体的硝酸根的四个氧原子. 对该配合物晶体在空气中进行γ辐照,EXAFS结果表明吸收剂量为400 kGy时,Sr―O键长及配位数没有发生变化,配位结构没有被破坏,具有很好的耐辐照稳定性. 显微红外光谱（Micro-FTIR）结果进一步证明辐照后冠醚环的部分C―H 键氧化为羟基或羰基,但并不影响DCH18C6与Sr²⁺的配位结构.     

Studies on Pyrazine Derivatives,XLIII: Synthesis and Antituberculosis Activity of 6-(1,2,3,4-Tetrahydroisoquinolino) and 6-(1,3,3-Trimethyl-6-azabicyclo-[3, 2, 1]-octano)-pyrazinocarboxylic Acid Derivatives

The reactivity of the chloride atom of 2-cyano-6-chloropyrazine was used in the reactions with amines, 1,2,3,4-tetrahydroisoquinoline and 1,3,3-trimethyl-6-azabicyclo-[3,2,1]-octane, which yielded the substrates for the syntheses of a series of new derivatives. The bulk of them were tested for their tuberculostatic activity. MIC values of the most active ones ( 2a , b , 5b , 7a , 9b , and 11b ) were within 3.1–50 μ g/mL.