25,27-二(α,γ-二酮苯丁氧基)-26,28-二羟基杯[4]芳烃的合成

以对叔丁基杯[4]芳烃为原料脱除叔丁基得到杯[4]芳烃,再经醚化、缩合两步反应首次合成25,27-二(α,γ-二酮苯丁氧基)-26,28-二羟基杯[4]芳烃,其结构经1H NMR、13C NMR、MS及元素分析表征。研究表明,目标化合物中的α,γ-二酮结构存在酮醇异构现象,在溶液中其酮醇异构体比例近似为1∶2。     

香豆素冠醚双功能化杯[4]芳烃的合成

以对叔丁基杯[4]芳烃为原料,经碱催化合成了26,28-双(4,7-双甲氧基香豆素)-5,11,17,23-四叔丁基杯[4]-冠-6(2)。其结构经1H NMR,IR和元素分析表征,2为锥形结构。     

25,26,27,28-羟乙氧基-杯[4]芳烃的合成

以对叔丁基苯酚为原料,经4步反应合成了新的杯[4]芳烃衍生物--25,26,27,28-羟乙氧基-杯[4]芳烃,其结构经~1H NMR和MS表征.     

5,11,17,23-四叔丁基-25,26,27,28-四[3-(甲氧基羰基)苄氧基]杯[4]芳烃包合性能的研究

杯芳烃是继冠醚和环糊精后的第三代主体化合物 .这类主体分子不仅可以识别和络合阳离子 ,而且还具有包合中性有机分子的性能 [1～ 5] .杯 [4]芳烃类包合物的晶体结构测定表明 ,它们可分为分子内和分子间包合两种类型 [3 ,5] ,前者是客体分子被包合在主体分子的空穴内 ,后者是客体分子被包合在主体分子之间 .对叔丁基杯 [4]芳烃的下沿酚氧基与上沿均可进行化学修饰得到不同的杯 [4]芳烃衍生物 .最早报道的对叔丁基杯 [4]芳烃及其衍生物的分子内包合物是与甲苯或乙腈的 1∶ 1包合物 [4 ,5] ,客体分子依靠 CH3 -π的作用被包结在主体分子内[6]…     

新型杯[4]芳烃气相色谱固定相的研究

合成了上缘特丁基脱去的杯[4]芳烃25，27-二丁氧基-26，28-二（ω-十一碳烯氧基）杯[4]芳烃（p-H-C[4]B)及其相应的聚硅氧烷化高分子（PSO-p-H-C[4]B)，以有上缘用N，N-二乙基氨甲基取代的杯[4]芳烃5，11，17，23-四（N，N-二乙基氨甲基）-25，26，27，28-四（ω-十一碳烯氧基）杯[4]芳烃（p-DEAM-C[4]U），并首次将它们用作毛细管柱气相色谱固定液，涂制成色谱柱，考察了这些杯[4]芳烃色谱柱的性能。结果表明，研制的杯[4]芳烃柱对芳香位置异构体均有良好的分离能力。     

单反应体系合成25-（硫代烷基烷氧基）-对叔丁基杯[4]芳烃

以对叔丁基杯[4]芳烃和二溴癸烷为原料,采用NaH-THF反应体系的新方法,合成了25-(巯基烷氧基)-对叔丁基杯[4]芳烃,其结构经1H NMR,13C NMR,IR和MALDI-TOF.MS表征.     

硫酰杯[4]芳烃羧酸类衍生物及其配合物的合成、晶体结构与表征

合成了5,11,17,23-四叔丁基-25,26,27-三[(乙酯基)甲氧基]-2,8,14,20-四硫酰杯[4]芳烃(L1)和5,11,17,23-四叔丁基-25,26,27-三(氧基乙酸)-2,8,14,20-四硫酰杯[4]芳烃(L2)及L2的稀土配合物, 采用元素分析、紫外光谱、红外光谱和1H NMR对其结构进行了表征. 用SMART 1000 CCD X射线衍射仪测定了L1的晶体结构. 结果表明, L1组成为: C52H65KO18S4·0.5H2O, 属三斜晶系, P1空间群, 晶胞参数a=1.2607(6) nm, b=1.5820(8) nm, c=1.6480(8) nm; α=83.720(8)°, β=69.327(8)°, γ=79.342(9)°, Z=2, V=3.019(3) nm3, Dc=1.270 g/cm3, F(000)=1218, μ=0.293 mm-1, R1=0.0937, wR2=0.2580. 杯芳烃分子采取部分锥式构象.     

以两种杯[4]芳烃衍生物为载体的PVC膜季铵盐正离子选择电极的研究

研究了两种新型杯[4]芳烃衍生物5，ll，17，23-四叔丁基-25，26，27，28-四-[3．(甲氧基羰基)苄氧基]杯[4]芳烃(I)和5，ll，17，23-四叔丁基-25，26，27，28-四-[3-(乙氧基羰基)苄氧基]杯[4]芳烃(Ⅱ)为载体的PVC膜电极的响应行为；实验结果表明，两电极对季铵盐正离子均具有优良的能斯特电位响应性能，以(I)为载体的电极对Bu4N^ 、Et4N^ 和Me4N^ 的线性响应范围分别为10^-6～10^-1mol／L、10^-6～10^-1mol／L和10^-4～10^-1mol／L，相应的斜率为59．2、55．0和55．9mV／pc；以(Ⅱ)为载体的电极对Bu4N^ 、Et4N^ 和Me4N^ 的线性响应范围分别为10^-6～10^-1mol/L，10^-5～10^-1mol/L和10^-4～10^-1mol／L，相应的斜率为59．8、56．6和56．0mV／pc；电极具有读数稳定，重复性好，可在pH值较宽范围内测定等优点；将该电极用于药品溴丙胺太林中丙胺太林含量的测定，所得结果与药典法基本一致。     

杯［4］芳烃衍生物一维超分子的晶体结构研究

杯芳烃是继冠醚、环糊精之后的第三代主体分子 ,在主客体化学、超分子化学中占有重要地位 [1～ 3] .据文献报道 ,在杯 [4]芳烃衍生物中存在各种各样的作用力 [4 ] ,如分子内氢键 [3,4 ]、分子间氢键 [5]、阳离子 -π作用 [6 ]、CH3-π作用 [7]和 π-π相互作用 [8,9]等 .本文报道了杯 [4]芳烃衍生物 5 ,1 1 ,1 7,2 3 -四叔丁基 -2 6,2 8-二 [2 -(甲氧基羰基 )苄氧基 ]-2 5 ,2 7-二羟基杯 [4]芳烃 (简称 L,结构式见 Scheme1 )的晶体结构 .研究中发现 ,分子中存在分子内氢键和分子间π-π相互作用 ,后者使化合物 L形成了一维锯齿形的超分子…     

新型对叔丁基杯[4]芳烃1,3-二酮衍生物的合成

以对叔丁基苯酚为起始原料,经聚合反应得对叔丁基杯[4]芳烃(2);2经醚化和缩合反应合成了一个新型的对叔丁基杯[4]芳烃1,3-二酮衍生物,其结构经1H NMR,13C NMR和MS表征。     

Evidence of Hydrogen Bonding in Stabilizing the Cone Conformation of a Monoalkylated Calix[4]arene. X-ray Structure of 25-[2-(ethoxy-1-p-toluene-sulfonate)phenyl]-26,27,28-trihydroxy calix[4]arene

The synthesis of25-[2-(ethoxy-1-p-toluene-sulfonate)phenyl]-26,27,28-trihydroxy calix[4]arene3 as a byproduct of the preparation of 1,3-dialkylated25,27-di-[2-(ethoxy-1p-toluene-sulfonate)phenyl]-26,28-dihydroxy calix[4]arene 2 is reported. Compound 3 is a monoalkylatedcalix[4]arene in the cone conformation. The X-ray structure of 3 showed that this conformation is stabilized by intramolecular hydrogen bonding.     

Nano CaCO3:An Unique Condensation Agent for the Preparation of Monosubstituted Calix[4] arene by Ring-opening Reaction

Nano CaCO3 was used as a condensation agent in the ring-opening reaction of p-tert-butylcalix[4] arene with epichlorohydrin to afford 5,11,17,23-tetra-tert-butyl1-26,27,28-trihydroxy-25-(1′-chloro-2′-hydroxy-3′-propyl)calix(4] arene regioselectively in 52% yield,The yield was less than 2% by using normal CaCO3 instead of nano one under the same conditions.     

两种新型杯（4）芳烃衍生物用作毛细管气相色谱固定相的研究

合成了两种新型的杯（４）芳烃衍生物：５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１，１－二甲基乙基－２５，２６，２７，２８－四苄氧基杯（４）芳烃Ｃ（４）ＴＢ）及５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１′，１′－二甲基－２５，２６，２７，２８－四乙氧羰甲氧基（Ｃ（４）ＴＥＣＭ）其结构经元素分析ＩＲ，＾１ＨＮＭＲ，ＭＳ的数据证实，分别将其与ＯＶ－１７０１固     

Synthesis and Properties of New Thiacalixarene Derivatives with Palladium Ion

Three new thiacalix[4]arene derivatives, 5,11,17,23-tetra-tert-butyl-25,27-di(2-hydroxyethoxy)-26,28-dihydroxythiacalix-{}[4]arene (2), 5,11,17,23-tetra-tert-25, 26,27,28-tetrakis[(methylcarboxyl)methoxy]thiacalix[4]arene (3),5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(2-hydroxy-1-propanoxy)thiacalix[4]arene (4), were synthesized for the first time. The coordination properties of thiacalix[4]arene(1) and its derivatives (2 and 4) were investigated by detecting the interactions betweenthese compounds and two palladium complexes, cis-[Pd(en)(H₂O)₂]²⁺ and cis-[Pd(dtco-3-OH)(H₂O)₂]²⁺, by means of electrospray ionization mass spectrometry (ESI-MS) technique.     

Oxacalix[3]arene complexes with the ReI(CO)3 fragment

Oxacalix[3]arenes p-methyloxacalix[3]arene (L(1)), p-isopropyloxacalix[3]arene (L2), and p-ethoxycarbonyloxacalix[3]arene (L3) are able to bind the Re(I)(CO)3 moiety with two of their three phenol-O atoms and one of their ether-O atoms. The monoanionic complexes were isolated in the salts (DBUH)[Re(CO)3(L1H-2)].L1 (1) and (NEt4)[Re(CO)3(L2H-2)].L2.0.5 MeCN (2) (DBU = 1,8-diazabicyclo[5.4.0]undec-7-ene). Over the course of its reaction with (NEt4)(2)[Re(CO)3Br(3)] and DBU, p-ethoxycarbonyloxacalix[3]arene decomposes to form [{Re(CO)3(L4H-2)}2] (3) {L4 = 1-(5-ethoxycarbonyl-2-hydroxy-3-hydroxymethyl-benzyl)-2,3,4,6,7,8,9,10-octahydro-pyrimido[1,2-a]azepin-1-ium. The expected monoanion [Re(CO)3(L3H-2)]- (4) was identified by 13C NMR and mass spectra.     

Luminescence behavior of a water soluble calix[4]arene derivative complex with terbium ion(III) in gelation solution

The complexation luminescence behavior of a water soluble calix[4]arene derivative, 5,11,17,23-tetra-sulfonate-25,26,27,28-tetra-carboxymethoxycalix[4]arene (L) with lanthanoid ion (Tb(3+)) has been investigated in gelation solution at 25 degrees C by using UV-vis and fluorescence spectra. The results obtained indicated that the water soluble calix[4]arene derivative can form an efficient energy transfer complex with terbium ion(III). The fluorescence of L x Tb(3+)complex is partially quenched by gelatin in gelation solution. The quenching intensity is related to the concentration and the hydrolysis degree of gelatin. Absorption and fluorescence spectra analysis show that the -COO(-) groups on gelatin have a definite binding ability to Tb(3+), and then, gelatin could compete binding with calix[4]arene derivative upon complexation with Tb(3+), leading to the relative fluorescence quenching of the formation complex of terbium(III) ion with calix[4]arene derivative.     

Oxo- and imidovanadium complexes incorporating methylene- and dimethyleneoxa-bridged calix[3]- and -[4]arenes: synthesis, structures and ethylene polymerisation catalysis

Reaction of [V(X)(OR)3] (X=O, Np-tolyl; R=Et, nPr or tBu) with p-tert-butylhexahomotrioxacalix[3]areneH3, LH3, affords the air-stable complexes [{V(X)L}n] (X=O, n=1 (1); X=Np-tolyl, n=2 (2)). Alternatively, 1 is readily available either from interaction of [V(mes)3THF] with LH3, and subsequent oxidation with O2 or upon reaction of LLi3 with [VOCl3]. Reaction of [V(Np-tolyl)(OtBu)3] with 1,3-dimethylether-p-tert-butylcalix[4]areneH2, Cax(OMe)2(OH)2, afforded [{VO(OtBu)}2(mu-O)Cax(OMe)2(O)2].2 MeCN (42 MeCN), in which two vanadium atoms are bound to just one calix[4]arene ligand; the n-propoxide analogue of 4, namely [{VO(OnPr)}2(mu-O)Cax(OMe)2(O)2].1.5 MeCN (51.5 MeCN), has also been isolated from a similar reaction using [V(O)(OnPr)3]. Reaction of [VOCl3], LiOtBu, (Me3Si)2O and Cax(OMe)2(OH)2 gave [{VO(OtBu)Cax(OMe)2(O)2}2Li4O2].8 MeCN (68 MeCN), in which an Li4O4 cube (two of the oxygen atoms are derived from the calixarene ligands) is sandwiched between two Cax(OMe)2(O)2. The reaction between [V(Np-tolyl)(OtBu)3] and Cax(OMe)2(OH)2, afforded [V(Np-tolyl)(OtBu)2Cax(OMe)2(O)(OH)]5 MeCN (75 MeCN), in which two tert-butoxide groups remain bound to the tetrahedral vanadium atom, which itself is bound to the calix[4]arene through only one phenolic oxygen atom. Reaction of p-tert-butylcalix[4]areneH4, Cax(OH)4 and [V(Np-tolyl)(OnPr)3] led to loss of the imido group and formation of the dimeric complex [{VCax(O)4(NCMe)}2].6 MeCN (86 MeCN). Monomeric vanadyl oxo- and imidocalix[4]arene complexes [V(X)Cax(O)3(OMe)(NCMe)] (X=O (11), Np-tolyl (12)) were obtained by the reaction of the methylether-p-tert-butylcalix[4]areneH3, Cax(OMe)(OH)3, and [V(X)(OR)3] (R=Et or nPr). Vanadyl calix[4]arene fragments can be linked by the reaction of 2,6-bis(bromomethyl)pyridine with Cax(OH)4 and subsequent treatment with [VOCl3] to afford the complex [{VOCax(O)4}2(mu-2,6-(CH2)2C5H3N)].4 MeCN (134 MeCN). The compounds 1-13 have been structurally characterised by single-crystal X-ray diffraction. Upon activation with methylaluminoxane, these complexes displayed poor activities, however, the use of dimethylaluminium chloride and the reactivator ethyltrichloroacetate generates highly active, thermally stable catalysts for the conversion of ethylene to, at 25 degrees C, ultra-high-molecular-weight (>5, 500,000), linear polyethylene, whilst at higher temperature (80 degrees C), the molecular weight of the polyethylene drops to about 450,000. Using 1 and 2 at 25 degrees C for ethylene/propylene co-polymerisation (50:50 feed) leads to ultra-high-molecular-weight (>2,900,000) polymer with about 14.5 mol% propylene incorporation. The catalytic systems employing the methyleneoxa-bridged complexes 1 and 2 are an order of magnitude more active than the bimetallic complexes 5 and 13, which, in turn, are an order of magnitude more active than pro-catalysts 8, 11 and 12. These differences in activity are discussed in terms of the structures of each class of complex.     

Synthesis of Oligomer and Styrene Polymer-supported Calix[4]arene Derivatives and Selective Extraction of Fe3+

Five new polymeric compounds containing more than one calix[4]arene have been synthesized by reacting an oligomer with 5,11,17,23-tetrakis[(diethylamino)methyl]-25,26,27,28-tetrahydroxycalix[4]arene (L1), 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone (L2), and p-nitrocalix[4]arene (L3), and chloromethylated polystyrene with 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone (L4) and p-nitrocalix[4]arene (L5). These compounds were studied by the selective extraction of Fe³⁺ cation from the aqueous phase into the organic phase and was carried out by using compounds L1–L5. It was observed that the polymer support attached to the lower rim of p-nitrocalix[4]arene was the most efficient carrier of Fe³⁺ in the extraction process.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.