Atomic layer deposition of organic-inorganic hybrid materials based on saturated linear carboxylic acids

Atomic layer deposition (ALD) has successfully provided thin films of organic-inorganic hybrid materials based on saturated linear carboxylic acids and trimethylaluminium (TMA). Films were grown for seven carboxylic acids: oxalic, malonic, succinic, glutaric, pimelic, suberic and sebacic acid, i.e. ranging from 2 to 10 carbon atoms in the molecular structure. These processes show exceptionally high growth rates; up to 4.3 nm/cycle for the pimelic acid-TMA system. Quartz crystal microbalance measurements of the growth dynamics indicate that all systems are of a self limiting ALD-type. Nevertheless, temperature dependent growth was observed in several systems. The width of the ALD windows shows correlations with the length of the carbon chains. Fourier transform infrared spectroscopy clearly proved that the deposited films are of a hybrid character, where the carboxylic acids primarily form bidentate complexes, though bridging complexes may also form. All films are X-ray amorphous as deposited. The films were further analyzed by atomic force microscopy for surface roughness and topography, UV-Vis spectroscopy and ellipsometry for optical properties, and the goniometer method for measuring sessile drops for surface wetting properties. Apart from the oxalic and malonic acid-TMA systems, the films are stable in contact with water. The films are generally smooth, transparent and have a refractive index close to 1.5. The complete coverage and accurate growth control offered by the ALD technique is here proven to provide surface-functionalized hybrid materials resembling metal-organic frameworks (MOF), probably as rather dense structures, yet with substantial potential for applications.     

Enhanced functional properties of chitosan films cross-linked by biosourced dicarboxylic acids

Chitosan-based films were developed using different biosourced dicarboxylic acid solutions (succinic acid, adipic acid, suberic acid and sebacic acid). The effect of incorporating these nontoxic solutions on water vapor barrier, tensile and antimicrobial properties of chitosan films was evaluated. Fourier Transform Infrared (FTIR) and cross polarization magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) analyses were also performed to investigate functional groups interactions between chitosan and dicarboxylic acids. Acetic acid-chitosan films showed significantly higher water vapor permeability (WVP) and lower tensile strength (TS) and elongation at break (%E) than dicarboxylic acid-prepared films (p < 0.05). Using either adipic acid or suberic acid solutions to fabricate chitosan films reduced WVP by 85% and enhanced TS by 21 to 27% and %E by more than 60% when compared with the acetic acid-prepared films. Chitosan films modified with either adipic acid or suberic acid exhibited antimicrobial activity against all tested microorganisms.     

Hybrid composites of monodisperse pi-conjugated rodlike organic compounds and semiconductor quantum particles

Composite materials of quantum particles (Q-particles) arranged in layers within crystalline powders of pi-conjugated, rodlike dicarboxylic acids are reported. The synthesis of the composites, either as three-dimensional crystals or as thin films at the air-water interface, comprises a two-step process: 1) The preparation of the Cd salts 6 (Cd), 8 (Cd) or Pb salts 6 (Pb), 8 (Pb) of the oligo(p-phenyleneethynylene)dicarboxylic acids 6 (H), 8 (H), in which the metal ions are arranged in ribbons and are separated by the long axis of the organic molecules, as demonstrated by X-ray powder diffraction analysis of the solids and grazing incidence X-ray diffraction analysis of the films on water. 2) Topotactic solid/gas reaction of these salts with H(2)S to convert the metal ions into Q-particles of CdS or PbS embedded in the organic matrix that consists of the acids 6 (H) and 8 (H). These hybrid materials have been characterized by X-ray photoelectron spectroscopy and transmission electron microscopy.     

Excited state dynamics and activation parameters of remarkably slow photoinduced CO loss from (η⁶-benzene)Cr(CO)₃ in n-heptane solution: a DFT and picosecond-time-resolved infrared study

The electronic structure of (η?-benzene)Cr(CO)? has been calculated using density functional theory and a molecular orbital interaction diagram constructed based on the Cr(CO)? and benzene fragments. The highest occupied molecular orbitals are mainly metal based. The nature of the lowest energy excited states were determined by time-dependent density functional theory, and the lowest energy excited state was found to have significant metal to carbonyl charge transfer character. The photochemistry of (η?-benzene)Cr(CO)? was investigated by time-resolved infrared spectroscopy with picosecond time resolution. The low energy excited state was detected following irradiation at 400 nm, and this exhibited ν(CO) bands at lower energy than the equivalent ν(CO) bands of (η?-benzene)Cr(CO)?, consistent with metal to carbonyl charge transfer character, and is formed with excess vibrational energy, relaxing to the v = 0 vibrational state within 3 ps. The resulting "cold" excited state decays to form the CO-loss species (η?-benzene)Cr(CO)? in approximately 70% yield and to reform (η?-benzene)Cr(CO)? within 150 ps. The rates of relaxation from the vibrationally hot state to the cold excited state and its subsequent reaction to yield (η?-benzene)Cr(CO)? were measured over a range of temperatures from 274 to 320 K, and the activation parameters for both processes were obtained from Eyring plots. The vibrational relaxation exhibits a negative activation enthalpy ΔH(?) (-10 (±4) kJ mol?1) and a negative activation entropy ΔS(?) (-50 (±16) J mol?1 K?1). A significant barrier (ΔH(?) = +12 (±4) kJ mol?1) was obtained for the formation of (η?-benzene)Cr(CO)? with a ΔS(?) value close to zero. These data are used to propose a model for the CO-loss process to yield (η?-benzene)Cr(CO)? and to explain why low temperature irradiation of (η?-benzene)Cr(CO)? with light of wavelengths greater than 400 nm produced relatively minor amounts of (η?-benzene)Cr(CO)?.     

聚喹啉/十八胺/稀土杂多阴离子杂化LB膜的制备、结构及电性质

将聚喹啉(PQ)、十八胺(OA)和含稀土元素的1;11钨系双系列杂多阴离子RE(PW₁₁O₃₉)₂^11-(RE=Ce^Ⅲ,Eu^Ⅲ,Gd^Ⅲ)通过LB技术掺杂,成功地制备了三种PQ/OA/稀土杂多阴离子杂化LB膜,通过π-A曲线、荧光、吸收光谱和原子力显微镜等手段对PQ/OA/稀土杂多阴离子杂化LB膜的成膜方式、性能、结构及形貌进行了表征;扫描隧道显微镜研究表明,将稀土杂多化合物掺杂到聚喹啉中可使聚喹啉的导电性明显增强.     

Preparation of the hybrid film of poly(allylamine hydrochloride)-functionalized graphene oxide and gold nanoparticle and its application for laser-induced desorption/ionization of small molecules

Hybrid films of gold nanoparticles and graphene oxides (GOs) were prepared by directly growing gold nanoparticles on supported thin layers of GO films on a glass slide. The gold/GO nanohybrid films were thoroughly investigated using various analytical methods, including Raman spectroscopy and atomic force microscopy. The hybrid film was then applied to laser desorption/ionization (LDI) of small molecules, which enabled mass spectrometric analysis of analytes. After a series of detailed mechanistic studies and systematic investigations, we found that the gold/GO hybrid films serve as a successful LDI platform for small-molecule analysis because of the high desorption efficiency of analytes from the hybrid films without inducing significant fragmentation of analytes. We suggest that the underlying GO films may effectively dissipate excess thermal energy generated by laser irradiation of Au to prevent undesirable analyte fragmentation.     

Metal-enhanced fluorescence using silver nanoparticles-embedded polyelectrolyte multilayer films for microarray-based immunoassays

Metal-enhanced fluorescence (MEF) of quantum dots (QDs) and its potential application in microarray-based immunoassays was investigated using silver nanoparticles (AgNPs) prepared by the in situ photoreduction of Ag⁺ inside a multilayer film consisting of poly(ethyleneimine) (PEI) and hyaluronic acid (HA). UV–Vis spectroscopy, X-ray diffraction, atomic force microscopy, scanning electron microscopy, and transmission electron microscopy confirmed the formation of well-dispersed AgNPs within the multilayer films, the thickness and the amount of which depended on the number of HA layers. Using AgNPs-containing hybrid multilayered films, it was possible to observe the MEF effect of adsorbed QDs, which could be tuned by the thickness of interlayer spacer film prepared of the layer-by-layer assembly of PEI and poly(styrene sulfonate). When the MEF-inducing hybrid film was used as a platform for immunoassay, a significant improvement in the fluorescence signal and sensitivity of the biosensing were observed in the presence of AgNPs in comparison with films that did not contain the nanoparticles.     

Microstructure and properties of 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)‐p‐phenylene diamine (PDA) polyimide/poly(vinylsilsesquioxane) hybrid nanocomposite films

Hybrid nanocomposite films of poly(vinylsilsesquioxane) (PVSSQ) and polyimide (PI) (PI/PVSSQ) were prepared via sol‐gel process from triethoxyvinylsilane (VSSQ) and thermal imidization from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)‐p‐phenylene diamine (PDA) polyamic acid (BPDA‐PDA PAA). We investigated the microstructure; interfacial interaction; and optical, thermal, dielectric, and mechanical properties of the hybrid films. The phase morphologies and degree of surface roughness were evaluated by scanning electron microscope (SEM) and atomic force microscope (AFM), respectively. It was found that the surface topography was influenced by the composition of PVSSQ. Hydrogen bonding interactions between polyimide (PI) matrix and PVSSQ domains were proved with FT‐IR spectroscopy. The transparency of the hybrid films was found to be dependent on the PVSSQ content. Incorporating of the PVSSQ in the hybrid composites increased the glass transition temperature of PI. Dielectric constants of the hybrid films were in the range of 2.37–3.59. Properties of the PI films were also significantly enhanced by adding 5–30 wt % of PVSSQ. For comparison, we also prepared the hybrid composites of PI and mixtures of VSSQ and tetraethoxysilane (TEOS) and the PI/silica hybrid composite containing 30 wt % of silica obtained from TEOS. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5189–5199, 2004     

两种砷钼杂化多酸盐的合成、 结构及变色性质

分别以2种V形羧酸[1,3-苯二甲酸(H₂BDC)和5-羟基-1,3-苯二甲酸(H₂OIP)]与钼酸铵进行反应, 得到了 2种有机酸根与无机酸根缩合构成的杂化砷钼酸盐： (NH₄)₁₇H₄[(AsMo₆O₂₁)₂(AsMo₆O₂₃)(BDC)₄]·28H₂O(1)和 (NH₄)₅Cs₈H₆[(AsMo₆O₂₁)₃(OIP)₅]·40H₂O(2). 利用单晶X射线衍射对2种化合物进行了结构分析, 发现二者均为三聚结构. 对2种化合物的光致变色及热致变色性质进行了研究, 发现在氙灯照射下2种化合物均可在5 min内变色. 当将2种化合物的样品加热到373 K时, 均出现颜色变化, 并随着温度升高颜色逐渐加深. 光致变色与热致变色过程前后的EPR检测结果均提示化合物的颜色变化与Mo^VI转化为Mo^V有关.     

Nanoindentation testing of SiO<Subscript>2</Subscript>-PMMA hybrid films on acrylic substrates with variable coupling agent content

In this work we report the influence of the molar composition of the coupling agent, as well as the curing conditions on the mechanical properties of SiO₂-PMMA (polymethyl methacrylate) hybrid films deposited on organic acrylic substrates. The SiO₂-PMMA hybrid films were deposited by the sol–gel method from hybrid precursor solutions with fixed molar ratio of 1:0.25 for TEOS/MMA (Tetraethyl-orthosilicate/Methylmethacrylate) and TEOS/TMSPM (3-trimethoxysilyl propyl methacrylate) molar ratios ranging from 1:0.05 to 1:0.2. The organic compound TMSPM was used as coupling agent to enhance the bond between the organic and inorganic molecules. The wear resistance, hardness and elastic modulus of the hybrid films were determined by nanoindentation techniques and compared to the substrate mechanical behaviour. The chemical bonding in the hybrid films was analyzed by Fourier Transform Infrared spectroscopy and their transparency by optical transmission and reflection spectroscopy. The friction coefficient and sliding life of the hybrid films were also measured with a pin-on-disc tribometer. The surface morphology and roughness were determined from atomic force microscopy images. The hybrid films with lowest content of coupling agent showed the best mechanical performance in terms of hardness, friction coefficient and wear resistance keeping high optical transparency.     

Unusual inorganic phase formation in ultraviolet‐curable organic–inorganic hybrid films

Inorganic–organic hybrid materials were prepared with a cycloaliphatic epoxide adduct of linseed oil with tetraethylorthosilicate (TEOS) oligomers via a cationic UV‐curing process. The TEOS oligomers were prepared in the presence of water and ethanol with hydrochloric acid as a catalyst. The TEOS oligomers were characterized with ¹H and ²⁹Si NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Hybrid films were cured, and the dynamic mechanical and thermal properties of the hybrid films were evaluated as a function of the TEOS oligomer content. The morphology of the hybrid films was examined with atomic force microscopy, transmission electron microscopy, and small‐angle light scattering. The microscopy and dynamic mechanical data indicated that the hybrid films were heterogeneous materials with various inorganic particle sizes dispersed within the organic matrix. In addition, ²⁹Si solid‐state NMR spectroscopy was used to investigate the coupling between the silicate region and organic regions. A schematic model is proposed to address structural features of hybrid materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1607–1623, 2005     

Synthesis of novel steroid-peptoid hybrid macrocycles by multiple multicomponent macrocyclizations including bifunctional building blocks (MiBs)

Two new groups of cholane-peptoid hybrid macrocycles were produced by implementing novel combinations of the MiB methodology. Steroid-based hybrid macrolactams including heterocycle and aryl moieties were obtained by utilizing cholanic dicarboxylic acids and diamines in a bidirectional double Ugi-Four-Component (Ugi-4CR) based macrocyclization protocol. Alternatively, N-substituted cyclocholamides were produced from a cholanic pseudo-amino acid by an Ugi-4CR-based cyclooligomerization approach. Both types of macrocycles are steroid-peptoid hybrid macrocycles containing exocyclic peptidic chains. These novel frameworks are a result of the use of bile acids bifunctionalized with carboxylic and amino functionalities as bifunctional building blocks of the Ugi-MiB approach.     

Hybrid Inorganic-Organic Sol–Gel Coatings in the SiO2-TiO2 System

In the present work, the influence of substituted Si-alkoxides on the structural and optical properties of films obtained in the SiO₂-TiO₂ system was studied. Methyltriethoxysilane (MTEOS) and 3-(tri-methoxysilyl)propyl methacrylate (TSPM) were used as SiO₂ sources and Ti(OBu)₄ was used as TiO₂ source. Acetylacetone was added to the Ti(OBu)₄ as chelating agent and the synthesis was carried out in acid medium. The films were deposited on oxidized Si-wafers by spin-coating. The films were characterized by XRD, spectro-ellipsometry (SE), and atomic force microscopy (AFM). The results obtained have shown that in the case of hybrid films the desired thickness could be obtained in a single deposition step. The thickness of the films and the optical properties are controlled by the bulkiness of the organic substitute bounded to Si. Among other optical applications, the potential use of such films as optical waveguides is proposed.     

Microstructure and properties of organosoluble polyimide/silica hybrid films

Organosoluble polyimide/silica hybrid materials were prepared via the sol-gel process and their pervaporation properties were studied. The organosoluble polyimide (PI) was based on 4,4′-oxydiphthlic dianhydride (ODPA) and 4,4′-diamino-3,3′-dimethyldiphenylmethane (DMMDA). The surface chemical structure of polyimide/silica films was analyzed by Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) and the results show that the completely hydrolysis of alkoxy groups of precursors and formation of the three-dimensional Si-O-Si network in the hybrid films. The morphology and the silica domain thus obtained were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The silica particle size in the hybrid is in the range of 40-100 nm for the hybrid films when the amount of silica is less than 20 wt%. The strength and the modulus of the hybrid films are improved and the mechanical properties were found to be strongly dependent on the density of the crosslink. The glass transition temperature (T_g) of the hybrid films was determined by dynamic mechanical analysis (DMA) and the value increased 15-20 °C as the silica content increased. Furthermore, the pervaporation performances of the prepared hybrid films were also investigated for the ethanol/water mixtures at different temperature.     

Synthesis,identification and study of electrical conductivity of the doped copolymer carbazole–phenol formaldehyde

The copolymer carbazole–phenol formaldehyde doped with 4 (4-hydroxy-phenyl azo)-benzene sulfonic acid (PABS), 2,5-dimethyl benzene sulfonic acid (PXSA) and 4-hydroxy-m-benzene disulfonic acid (PDSA) were prepared. These compounds are identified by FT-IR spectroscopy.The conductivity of copolymer carbazole–phenol formaldehyde doped with 4 (4-hydroxy-phenyl azo)-benzene sulfonic acid (PABS), 2,5-dimethyl benzene sulfonic acid (PXSA) and 4-hydroxy-m-benzene disulfonic acid (PDSA) was studied as a function of weight of the dopant compounds; an increase of conductance of the copolymer by doping with PABS is noted; the conductance became equal to 0.000595 ohm⁻¹ for 0.1 g higher conductance for the copolymer when it is doping with PABS.     

Assembly of Graphene Nanosheets and SiO2 Nanoparticles Towards Transparent,Antireflective, Conductive,and Superhydrophilic Multifunctional Hybrid Films

A new approach for the fabrication of transparent, antireflective, conductive and superhydrophilic multifunctional hybrid films through the layer‐by‐layer (LbL) assembly of reduced graphene oxide (RGO) nanosheets and SiO₂ nanoparticles is reported. The RGO nanosheets, SiO₂ nanoparticles and films were characterized by means of transmission electron microscopy, UV/Vis absorption spectrophotometry, Raman spectroscopy, atomic force microscopy, contact angle/interface system, and a four‐point probe. It was found that the graphene/SiO₂ hybrid films exhibited a significant increase in transmittance as compared with RGO films. The optical, electronic and wetting properties of hybrid films could be manipulated by rational design of the film structure and variation of the cycle number of the LbL assembly. The obtained transparent, conductive, and superhydrophilic graphene/SiO₂ hybrid films showed excellent antireflective, antistatic, and antifogging behaviors. The remarkable performance could be attributed to the combination of electrical conductivity of RGO nanosheets and superhydrophilic antireflective surface derived from SiO₂ nanoparticles.     

Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol% PHB could be obtained by initial reaction of MHB followed by PHB.     

Evaluation of proton conductivity of sulfonated polyimide/dihydroxy naphthalene charge‐transfer complex hybrid membranes

Sulfonated polyimide (SPI)/dihydroxynaphthalene (DHN) charge‐transfer (CT) complex hybrid films were investigated as possible alternative for polymer electrolyte membranes in polymer electrolyte fuel cells. SPI/DHN CT complex hybrid films include CT complexes, which might work as electronic conductors, and sulfonic acid units, which could work as proton conductors. Therefore, the origin of the conductivity of SPI/DHN complex hybrid films was evaluated by four‐probe impedance measurements in the through‐plane direction of the films. The obtained conductivity of the CT complex hybrid films increased with the increase of ion exchange capacity of the CT films and the decrease of CT complex concentration in the films. These results indicated that proton transfer dominantly occurred in the CT complex hybrid films. Proton conductivity of the CT complex hybrid films consisting of 2,6‐ or 1,5‐DHN showed the similar values, although the molecular geometries of the CT complex were different. The activation energy values for proton conductivity in the CT films were approximately the same as that of Nafion 212. Water uptake (WU) results were also conducted and suggest that CT complex formation could control the degree of WU of the films and prevent dissolution of SPI. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2991–2997     

Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol % PHB could be obtained by initial reaction of MHB followed by PHB.     

Investigation of chemically modified barium titanate beads as surface-enhanced Raman scattering (SERS) active substrates for the detection of benzene thiol, 1,2-benzene dithiol, and rhodamine 6G

SERS active surfaces were prepared by depositing silver films using Tollen's reaction on to barium titanate beads. The SERS activity of the resulting surfaces was probed using two thiols (benzene thiol and 1,2-benzene dithiol) and rhodamine 6G. The intensity of the SERS signal for the three analytes was investigated as a function of silver deposition time. The results indicate that the SERS intensity increased with increasing thickness of the silver film until a maximum signal intensity was achieved; additional silver deposition resulted in a decrease in the SERS intensity for all of the studied molecules. SEM measurement of the Ag coated barium titanate beads, as a function of silver deposition time, indicate that maximum SERS intensity corresponded with the formation of atomic scale islands of silver nanoparticles. Complete silver coverage of the beads resulted in a decreased SERS signal and the most intense SERS signals were observed at deposition times of 30 min for the thiols and 20 min for rhodamine 6G.