N,S-donor acetamide ligand: silver (I) binding and test silver (I) extraction studies

Transition Metal Chemistry - Ligands bearing soft donors including N- and S- have found applications in selective metal recovery due to the ability to preferentially bind soft acceptors like Ag+....     

Redox potential, ligand and structural effects in rhodium(I) complexes

The electrochemical behaviour of the set of tetracoordinate rhodium(I) complexes [Rh(O^∩O)(CO)L] [O^∩O=MeC(O)CHC(O)Me (acac), L=CO (1), P(NC₄H₄)₃ (2), PPh(NC₄H₄)₂ (3), PPh₂(NC₄H₄) (4), PPh₃ (5), PCy₃ (6), P(OPh)₃ (7) or PPh₂(C₆H₄OMe-4) (8); O^∩O=PhC(O)CHC(O)Me (bac), L=CO (9) or PPh₃ (10); O^∩O=PhC(O)CHC(O)CF₃(bta), L=CO (11) or PPh₃ (12)] and of the pentacoordinate [RhH(CO)L₃] [L=P(NC₄H₄)₃ (13), PPh₃ (14), P(OPh)₃ (15) or P(OC₆H₄Me-4)₃ (16)] and [RhHL₄] [L=PPh₃ (17) or P(OC₆H₄Me-3)₃ (18)] was studied by cyclic voltammetry and controlled potential electrolysis, in aprotic medium, at a Pt electrode. They present a single-electron oxidation wave (I) (irreversible or quasi-reversible) that can be followed, at a higher potential, by a second and irreversible one (II). The values of first oxidation potential for the tetracoordinate complexes fit the additive Lever's electrochemical parameterisation, and the ligand electrochemical Lever E_L and Pickett P_L parameters were estimated for the N-pyrrolyl phosphines PPh_n(NC₄H₄)_3−n (n=0, 1 or 2) and for the organophosphines PCy₃ and PPh₂(C₆H₄OMe-4), the former behaving as weaker net electron donors (the electron donor ability decreases with the increase of the number of N-pyrrolyl groups) than the latter phosphines. The pentacoordinate hydride complexes 13–18 fit a distinct relationship which enabled the estimate of the E_L ligand parameter for the phosphites P(OC₆H₄Me-3)₃ and P(OC₆H₄Me-4)₃. Electrochemical metal site parameters were obtained for the square planar and the pentacoordinate Rh(I)/Rh(II) couples and, for the former, the redox potential is shown to present a much higher sensitivity to a change of a ligand than the octahedral redox couples investigated so far. Linear relationships were also observed between the oxidation potential and the P_L ligand parameter (for the series [Rh(acac)(CO)L]) or the infrared ν(CO) frequency, and a generalisation of the former type of correlation is proposed for series of square-planar 16-electron complexes [M′_SL] with a common 14-electron T-shaped binding metal centre {M′_S}. Oxidation of 5 by Ag[PF₆] leads to the dimerisation of the derived Rh(II) species.     

Reactivity of novel N,N'-diphosphino-silanediamine-based rhodium(I) derivatives

The coordination abilities of the novel N,N'-diphosphino-silanediamine ligand of formula SiMe(2)(NtolPPh(2))(2) (SiNP, 1) have been investigated toward rhodium, and the derivatives [RhCl(SiNP)](2) (2), [Rh(SiNP)(COD)][BF(4)] (3), and Rh(acac)(SiNP) (4) have been synthesized. The stability of the dinuclear frame of [RhCl(SiNP)](2) (2) toward incoming nucleophiles has been shown to be dependent on their π-acceptor ability. Indeed, the mononuclear complexes RhCl(SiNP)(L) (L = CO, 5; CN(t)Bu, 6) have been isolated purely and quantitatively upon reaction of 2 with CO and CN(t)Bu, respectively. Otherwise, PPh(3) and RhCl(SiNP) equilibrate with Rh(Cl)(SiNP)(PPh(3)) (7). Carbon electrophiles such as MeI and 3-chloro-1-proprene afforded the oxidation of rhodium(I) to rhodium(III) and the formation of RhCl(2)(η(3)-C(3)H(5))(SiNP) (8) and Rh(Me)(I)(SiNP)(acac) (10), respectively. The methyl derivative 10 is thermally stable and does not react either with CO or with CN(t)Bu even in excess. Otherwise, RhCl(2)(η(3)-C(3)H(5))(SiNP) (8) is thermally stable but reacts with CO, affording 3-chloro-1-proprene and RhCl(SiNP)(CO) (5). Finally, upon reaction of Rh(acac)(SiNP) (4) and 3-chloro-1-proprene, RhCl(acac)(η(1)-C(3)H(5))(SiNP) (9a) and [Rh(acac)(η(3)-C(3)H(5))(SiNP)]Cl (9b) could be detected at 233 K. At higher temperatures, 9a and 9b smoothly decompose, affording the dinuclear derivative [RhCl(SiNP)](2) (2) and the CC coupling product 3-allylpentane-2,4-dione.     

Mononuclear and polynuclear copper(I) complexes with a new N,N',S-donor ligand and with structural analogies to the copper thionein core

The N,N',S-donor ligand 4-methoxy-3,5-dimethyl-2-((3-(2-(methylthio)phenyl)-1H-pyrazol-1-yl)methyl)pyridine (L) was prepared from 2-(chloromethyl)-4-methoxy-3,5-dimethylpyridine hydrochloride and 3-(2-(methylthio)phenyl)-1H-pyrazole. The Cu(I) complexes [Cu2(L)2CH3CN][Cu(L)CH3CN](BF4)3 (1), [Cu(L)PPh3]BF4 (2), and [Cu6(L)2(C6F5S)6] (3) were prepared and characterized by X-ray crystallography (PPh3=triphenylphosphine, C6F5S-=pentafluorothiophenolate). The unit cell of compound 1 consists of cocrystallized mononuclear and dinuclear entities in which all of the copper atoms exhibit distorted tetrahedral coordination. Compound 2 is monomeric with L bound in the kappa3-N,N',S mode and a PPh3 molecule that completes the coordination environment. Compound 2 presents a fluxional behavior in CDCl3 solution due to the boat inversion of the six-membered N,N' chelate ring (DeltaH=+43.6(3) kJ mol(-1), DeltaS=-16(1) J mol(-1) K(-1)). Crystallization of 3 in acetonitrile leads to a polynuclear structure that contains a CH3CN molecule coordinated to one of the copper atoms: [Cu6(L)2(C6F5S)6CH3CN] (3a). The core of 3a partially resembles a {Cu4S6} adamantane-like moiety, the only difference being that the Cu-NCCH3 interaction leads to the opening of the cluster by disrupting a Cu-Cu interaction. Part of this assembly is found in the yeast metallothionein copper(I)-cysteinate core whose crystal structure has recently been reported. Two additional [Cu(L)]+ peripheral moieties interact with the cluster by means of bridging thiolates. ESI-mass spectrometry, conductivity measurements, and 1H/19F pulsed gradient spin echo (PGSE) NMR experiments suggest that 3a dissociates in acetonitrile solution: 3a+CH3CN-->[Cu4(C6F5S)6]2-+2[Cu(L)CH3CN]+. The stability of the cluster with respect to the hypothetical mononuclear species, [Cu(L)(C6F5S)], is confirmed by DFT calculations (B3LYP), which illustrate the exergonic character of the reaction: 6[Cu(L')(C6H5S)]-->[Cu6(L')2(C6H5S)6]+4L' (DeltaG298=-58.6 kJ mol(-1), where L' and C6H5S- are simplified models for L and C6F5S-, respectively). The energetics pertinent to the ionic dissociation of the cluster in acetonitrile is computed using the polarizable continuum model (PCM) approach.     

Synthesis of N,O-heterocyclic carbene and coordination to rhodium(I) and copper(I)

5,7-Di-tert-butyl-3-phenyl benzoxazolium tetrafluoroborate 1 could be prepared by simple reaction of the corresponding aminophenol with triethyl orthoformate under acidic conditions. Both rhodium(I) and copper(I) complexes with benzoxazol-2-ylidene ligand were then efficiently synthesised in a straightforward and smooth manner involving the reaction of benzoxazolium salt 1 with metal precursor and an external base. The complexes have been fully characterised and used in metal-catalysed hydrosilylation of ketones, where they showed poor catalytic activity, presumably due to low stability of the complexes under those conditions.     

Catalyst and substituent effects on the rhodium(II)-catalysed intramolecular Buchner reaction

Intramolecular rhodium(II)-catalysed aromatic addition (Buchner) reactions of a range of α- and β-substituted α-diazoketones are reported. Both steric and electronic effects are evident for the aromatic additions investigated. In general, highly efficient aromatic addition is achieved through use of rhodium carboxylates bearing electronegative ligands, such as rhodium trifluoroacetate, while aromatic addition employing rhodium catalysts with more electron-donating ligands, such as rhodium caprolactam, is less efficient. Excellent levels of diastereoselectivity are possible for this process in the presence of rhodium acetate and rhodium caprolactam, however, a reduction in diastereocontrol is generally associated with use of the more reactive, electronegative catalysts. Interestingly, these catalyst effects can be overcome through the steric effects of the substituents on the α-diazoketone substrates, with the presence of sterically bulky substituents at the 2- or 3-position rendering the aromatic addition essentially catalyst independent in terms of efficiency and diastereocontrol.     

Correction to: Bis-chelates of nickel(II) and copper(II) with an O,S-donor piperazine ligand

Transition Metal Chemistry - After the publication of this article ‘Bis-chelates of nickel(II) and copper(II) with an O,S-donor piperazine ligand,’ it came to our attention that...     

Chiral and diastereoisomeric rhodium(I) coordination compounds with carvone as bidentate ligand

The chiral dienone p-mentha-6,8-dien-2-one (carvone) coordinates readily with rhodium(I) to form complexes of pronounced stability. Novel diastereoisomeric planar coordination compounds of rhodium(I) containing two chiral bidentate ligands have been prepared for the first time. The synthesis of the compounds is simple, and the yields are high.     

Polystyrene anchored rhodium (I) bidentate ligand complexes as catalysts for hydrogenation

Polystyrene supported Rh(I) AA′ (AA′ = anthranilic acid, 2,2′-bipyridine or 1,10-phenanthroline) complexes catalyse the hydrogenation of monoolefins (terminal, cyclic and internal) and dienes. Ethyl sorbate undergoes saturation via the monoene intermediate. Thiscis olefin reacts faster than thetrans isomer. The rate law for the reaction is: Rate α [catalyst] [substrate] [H₂].     

Copper beta-Octakis(trifluoromethyl)corroles: new paradigms for ligand substituent effects in transition metal complexes

The reaction of copper beta-octabromo- meso-triarylcorrole derivatives with methyl 2,2-difluoro-2-(fluorosulfonyl)acetate has provided four beta-octakis(trifluoromethyl)corrole complexes, Cu[(CF 3) 8T( p-XP)C] (X = F, H, Me, OMe), in moderate yields. The new complexes present a conglomeration of remarkable substituent effects, both steric and electronic. DFT (OLYP/TZP) geometry optimization of Cu[(CF 3) 8TPC] (i.e., X = H) indicates a sterically hindered, strongly saddled geometry, with numerous short F...F nonbonded contacts of 2.5-2.9 A and certain beta carbons displaced by over 1.5 A relative to the mean corrole plane. The CF 3 groups generally appear as quartets in the (19)F NMR spectra, with unexpectedly large (5) J FF coupling constants of about 14 Hz, apparently a manifestation of the highly crowded structure. The eight CF 3 groups together exert a powerful influence on the redox potentials of the copper corrole core. Thus, the E 1/2ox of Cu[(CF 3) 8TPC] (1.4 V vs saturated calomel electrode) is a full half of a volt above that of Cu(TPC) (0.9 V) and a quarter of a volt above that of Cu(Br 8TPC) (1.14 V). Intriguingly, the beta CF 3 groups also greatly intensify the influence of the meso aryl substituents on the redox potentials, relative to the other Cu[Y 8T( p-XP)C] series, where Y = H, F, and Br. The Cu[(CF 3) 8T( p-XP)C] complexes also exhibit the most red-shifted optical spectra of any series of metallocorroles synthesized to date. Thus, between Cu(TPC) and Cu[(CF 3) 8T( p-MeO-P)C], the Soret maximum shifts by nearly 100 nm. The observed red-shifts are attributed in part to charge-transfer transitions of the Soret region and in part to the extreme nonplanar distortions.     

Role of the ancillary ligand N,N-dimethylaminoethanol in the sensitization of Eu(III) and Tb(III) luminescence in dimeric beta-diketonates

Two types of dimeric complexes [Ln2(hfa)6(mu2-O(CH2)2NHMe2)2] and [Ln(thd)2(mu2,eta2-O(CH2)2NMe2)]2 (Ln = YIII, EuIII, GdIII, TbIII, TmIII, LuIII; hfa- = hexafluoroacetylacetonato, thd- = dipivaloylmethanato) are obtained by reacting [Ln(hfa)3(H2O)2] and [Ln(thd)3], respectively, with N,N-dimethylaminoethanol in toluene and are fully characterized. X-ray single crystal analysis performed for the TbIII compounds confirms their dimeric structure. The coordination mode of N,N-dimethylaminoethanol depends on the nature of the beta-diketonate. In [Tb2(hfa)6(mu2-O(CH2)2NHMe2)2], eight-coordinate TbIII ions adopt distorted square antiprismatic coordination environments and are O-bridged by two zwitterionic N,N-dimethylaminoethanol ligands with a Tb1...Tb2 separation of 3.684(1) A. In [Tb(thd)2(mu2,eta2-O(CH2)2NMe2)]2, the N,N-dimethylaminoethanol acts as chelating-bridging O,N-donor anion and the TbIII ions are seven-coordinate; the Tb1...Tb1A separation amounts to 3.735(2) A within centrosymmetric dimers. The dimeric complexes are thermally stable up to 180 degrees C, as shown by thermogravimetric analysis, and their volatility is sufficient for quantitative sublimation under reduced pressure. The EuIII and TbIII dimers display metal-centered luminescence, particularly [Eu2(hfa)6(O(CH2)2NHMe2)2] (quantum yield Q(L)Ln = 58%) and [Tb(thd)2(O(CH2)2NMe2)]2 (32%). Consideration of energy migration paths within the dimers, based on the study of both pure and EuIII- or TbIII-doped (0.01-0.1 mol %) LuIII analogues, leads to the conclusion that both the beta-diketone and N,N-dimethylaminoethanol ligands contribute significantly to the sensitization process of the EuIII luminescence. The ancillary ligand increases considerably the luminescence of [Eu2(hfa)6(O(CH2)2NHMe2)2], compared to [Ln(hfa)3(H2O)2], through the formation of intra-ligand states while it is detrimental to TbIII luminescence in both beta-diketonates. Thin films of the most luminescent compound [Eu2(hfa)6(O(CH2)2NHMe2)2] obtained by vacuum sublimation display photophysical properties analogous to those of the solid-state sample, thus opening perspectives for applications in electroluminescent devices.     

Unsymmetrically N,N'-substituted saturated carbenes: synthesis, reactivity and preparation of a rhodium(I) carbene complex

A versatile synthesis of unsymmetrically N,N'-substituted saturated carbenes is described. The novel racemic imidazolidin-2-ylidenes rac-5 have been synthesized by reductive desulfurization of the corresponding imidazolidin-2-thiones rac-4. The thiones were prepared in two reaction steps from aldimines and secondary amines. Three different substituents at N1, N3 and C4 of the five-membered N-heterocyclic ring can be introduced by choice of suitable aldimines and secondary amines. The dimerization behaviour (diaminocarbene/enetetramine equilibrium) for the unsymmetrically N,N'-substituted imidazolidin-2-ylidenes has been investigated by NMR spectroscopy. Unsymmetrically N-iPr and N-iBu substituted N-heterocyclic carbenes undergo a slow dimerization, whereas N-tBu substituted derivatives are stable as monomeric carbenes indefinitely. The carbene ligand rac-5d has been coordinated to rhodium(I) to give the square-planar rhodium carbene complex [Cl(cod)Rh(rac-5d)]rac-6d which has been characterized by an X-ray diffraction analysis.     

Fine-tuning the weak-link approach: effect of ligand electron density on the formation of rhodium(I) and iridium(I) metallomacrocycles

A novel bis(phosphinoalkyl-thioether)arene ligand with a fluorinated aryl group (1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)F(4)) has been synthesized. This ligand has been used to prepare symmetric bimetallic structures with Rh(I) and Ir(I) metal centers in high yield. Unlike their nonfluorinated counterparts, these complexes can be opened into large macrocyclic structures through straightforward ligand (i.e., carbon monoxide, nitriles, and isocyanides) substitution reactions at the metal-thioether linkage. In addition, the symmetric bimetallic structures have been shown to react with appropriately sized bifunctional aromatic molecules to form three-tiered host-guest structures.     

Preparations,structures and reactions of mono-alkene alkyne complexes of rhodium(I): The crystal structures of acetylacetonato(ethylene) (hexafluorobut-2-yne)rhodium(I) and acetylacetonato(cyclo-octene) (hexafluorobut-2-yne)rhodium(I)

Mono-alkene alkyne complexes of rhodium(I) have been synthesised, and characterised by i.r., ¹⁹F n.m.r., and crystallography. Their role as intermediates in the formation of cyclohexadienes is described.     

Synthesis and catalytic properties of N -functionalised carbene complexes of rhodium(I)

Reaction of [RhCl(COD)]₂, with 1,3-dialkylimidazolinylidene (1) or 1,3-dialkylbenzimidazolinylidene (2) resulted in the formation of rhodium(I) 1,3-dialkylimidazolin-2-ylidene (3a-c) and 1,3-dialkylbenzimidazolin-2-ylidene (4a,b) complexes. Triethylsilane reacts with acetophenone derivatives in the presence of catalytic amounts of RhCl(COD)(1,3-dialkylimidazolin-2-ylidene) or RhCl(COD)(1,3-dialkylbenzimidazolin-2-ylidene) to give the corresponding silylethers in good yield (57–98%).     

Synthesis and molecular structure of the first rhodium(I) complex containing a tetra-tert-butylcyclopentaphosphanide ligand

Na[cyclo-(P(5)(t)Bu(4))] (1) reacts with [RhCl(PPh(3))(3)] (1:1) to give the first rhodium(I) complex with a tetra-tert-butylcyclopentaphosphanide ligand, [Rh{cyclo-(P(5)(t)Bu(4))}(PPh(3))(2)] (2). 2 was characterized by NMR ((1)H, (13)C, (31)P), MS, IR, and X-ray structure determination.     

Five coordinate rhodium(I) olefin complexes containing the ligand bis(but-3-enyl)phenylphosphine

The complexes Rh₂X₂(bbp)₂ (X = Cl, Br or I; and bbp = bis(but-3-enyl)phenylphosphine) have been prepared. These complexes have been characterized as five coordinate dimers in which the unsaturated phosphine acts as a tridentate ligand. Carbon monoxide reacts reversibly with the dimers forming the five coordinate monomeric compounds RhX(CO)(bbp). Mass spectral, infrared, Raman, and proton magnetic resonance data are consistent with the above formulations.     

Cyclometalated rhodium(III) complex with phen-dione ligand

The novel cyclometalated Rh(III) complex, [Rh(phpy-κ²N,C^2′)₂(phen-dione)]PF₆, where phpy-κ²N,C^2′ is pyridine-2-yl-2-phenyl and phen-dione is 1,10-phenanthroline-5,6-dione has been prepared and characterized by elemental analysis, IR, ¹H NMR, and electronic absorption spectroscopies, cyclic voltammetry, and X-ray crystallography. The crystal structure of [Rh(phpy-κ²N,C^2′)₂(phen-dione)]PF₆·CH₃CN shows that the coordination geometry around the Rh(III) is a distorted octahedron, with bite angles of 76.13°-81.09° for all three bidentate ligands.