A general and efficient copper catalyst for the amidation of aryl halides

An experimentally simple and inexpensive catalyst system was developed for the amidation of aryl halides by using 0.2-10 mol % of CuI, 5-20 mol % of a 1,2-diamine ligand, and K(3)PO(4), K(2)CO(3), or Cs(2)CO(3) as base. Catalyst systems based on N,N'-dimethylethylenediamine or trans-N,N'-dimethyl-1,2-cyclohexanediamine were found to be the most active even though several other 1,2-diamine ligands could be used in the easiest cases. Aryl iodides, bromides, and in some cases even aryl chlorides can be efficiently amidated. A variety of functional groups are tolerated in the reaction, including many that are not compatible with Pd-catalyzed amidation or amination methodology.     

A new short synthesis of 3-substituted 5-amino-1-(chloromethyl)-1,2-dihydro-3H-benzo[e]indoles (amino-CBIs)

A new short synthesis of 3-substituted 5-amino-1-(chloromethyl)-1,2-dihydro-3H-benzo[e]indoles from Martius Yellow is disclosed. The key steps of the synthesis were three efficient regioselective reactions (iodination, 5-exo-trig aryl radical-alkene cyclization and carboxylation).     

Synthesis of 9,9‐Disubstituted 9H‐Pyrrolo[1,2‐a]indoles by Hydriodic Acid‐Catalyzed Cyclization of 1‐[2‐(1‐Aryl(or methyl)ethenyl)phenyl]‐1H‐pyrroles

A novel method is reported for the synthesis of 9,9‐disubstituted 9H‐pyrrolo[1,2‐a]indoles. Cyclization of 1‐[2‐(1‐aryl(or methyl)ethenyl)phenyl]‐1H‐pyrroles, which can be easily prepared from 2‐(1‐aryl(or methyl)ethenyl)anilines, proceeds smoothly, in general, at 0° in the presence of a catalytic (or an equimolar) amount of HI in MeCN to provide the desired products.     

Synthesis of 9-arylamino- and (Z)-9-arylimino-9H-pyrrolo[1,2-a]indoles by reactions of 2-(pyrrol-1-yl)benzaldehydes with aryl amines

Heating mixtures of 2-(pyrrol-1-yl)benzaldehydes and aryl amines under argon afforded 9-arylamino-9H-pyrrolo[1,2-a]indoles, via cyclization of the resulting 2-(pyrrol-1-yl)benzaldimine intermediates. Heating in the presence of oxygen afforded (Z)-9-arylimino-9H-pyrrolo[1,2-a]indoles, which were successfully hydrolyzed with hydrochloric acid to give pyrrolo[1,2-a]indol-9-ones.     

A chiral primary-tertiary-1,2-diamine as an efficient catalyst in asymmetric aldehyde–ketone or ketone–ketone aldol reactions

A novel chiral 1,2-diaminocyclohexane derivative, (1R,2R)-N¹-n-pentyl, N¹-benzyl-1,2-cyclohexanediamine, was designed, synthesized and applied as a catalyst in a number of aldol reactions between ketones and aryl aldehydes. Reactions between acetone and aryl aldehydes gave aldol products with moderate to good yields and with excellent enantioselectivity (up to yield 85%, ee 98%), while reactions between cyclohexanone and aryl aldehydes provided anti-β-hydroxyketone products with excellent yields, diastereoselectivity and with enantioselectivity (up to 82% yield, anti/syn ratio 99:1, ee 99%). The aldol reactions between acetone and isatins were investigated, which afforded excellent yields and enantioselectivity (up to 95% yield, 98% ee). The (R)- and (S)-isomers of convolutamydine A were obtained with 95% yield and 96% ee, and 95% yield and 94% ee, respectively.     

Copper-catalyzed halogen exchange in aryl halides: an aromatic Finkelstein reaction

A mild and general method for the conversion of aryl, heteroaryl, and vinyl bromides into the corresponding iodides was developed utilizing a catalyst system comprising 5 mol % of CuI and 10 mol % of a 1,2- or 1,3-diamine ligand. A variety of polar functional groups are tolerated, and even N-H containing substrates such as sulfonamides, amides, and indoles are compatible with the reaction conditions. Both the reaction rate and the equilibrium conversion of the aryl bromide depend on the choice of the halide salt and the solvent. The best results were obtained using NaI as the halide salt and dioxane, n-butanol, or n-pentanol as the solvents.     

Iridium- and ruthenium-catalysed synthesis of 2,3-disubstituted indoles from anilines and vicinal diols

A straightforward and atom-economical method is described for the synthesis of 2,3-disubstituted indoles. Anilines and 1,2-diols are condensed under neat conditions with catalytic amounts of either [Cp*IrCl(2)](2)/MsOH or RuCl(3)·xH(2)O/phosphine (phosphine = PPh(3) or xantphos). The reaction does not require any stoichiometric additives and only produces water and dihydrogen as byproducts. Anilines containing methyl, methoxy, chloro and fluoro substituents can participate in the cyclocondensation. Meta-substituted anilines give good regioselectivity for 6-substituted indoles, while unsymmetrical diols afford excellent regioselectivity for the indole isomer with an aryl or large alkyl group in the 2-position. The mechanism for the cyclocondensation presumably involves initial formation of the α-hydroxyketone from the diol. The ketone subsequently reacts with aniline to generate the α-hydroxyimine which rearranges to the corresponding α-aminoketone. Acid- or metal-catalysed electrophilic ring-closure with the release of water then furnishes the indole product.     

Synthesis of Indoles through Domino Reactions of 2‐Fluorotoluenes and Nitriles

Indoles are essential heterocycles in medicinal chemistry, and therefore, novel and efficient approaches to their synthesis are in high demand. Among indoles, 2‐aryl indoles have been described as privileged scaffolds. Advanced herein is a straightforward, practical, and transition‐metal‐free assembly of 2‐aryl indoles. Simply combining readily available 2‐fluorotoluenes, nitriles, LiN(SiMe₃)₂, and CsF enables the generation of a diverse array of indoles (38 examples, 48–92 % yield). A range of substituents can be introduced into each position of the indole backbone (C4 to C7, and aryl groups at C2), providing handles for further elaboration.     

One-pot,five-component 1,3-dipolar cycloaddition: A facile synthesis of spiropyrrolidine and spiropyrrolizidine derivatives

A one-pot, five-component strategy toward the synthesis of new indole substituted pyrrolidine and pyrrolizidine heterocycles through 1,3-dipolar cycloaddition reactions using ninhydrin, 1,2-phenylenediamine, amino acids, 3-cyanoacetyl indoles and aryl aldehydes is described. The features of this procedure were characterized by the mild reaction conditions, high yields, one-pot procedure, and operational simplicity.     

Thermal decomposition of complexes

The iron(II) complex of the Schiff bases trans-N,N'-bis(salicylidene)-1,2-cyclohexanediamine (Salcn), manganese(II) and vanadyl complexes of the Schiff bases cis- andtrans-N,N'-bis(salicylidene)-1,2-cyclohexanediamine (Salcn) were prepared and characterized by IR spectroscopy, and elemental analysis. These new complexes were submitted to thermal analysis (TG and DSC) under dynamic air atmosphere. The differences in the decomposition profiles were related to the structure of isomers and decomposition intermediates were characterized according to their X-ray diffraction pattern and by their infrared spectrum. This revised version was published online in August 2006 with corrections to the Cover Date.     

Rhodium‐Catalyzed C?H Annulation of Nitrones with Alkynes: A Regiospecific Route to Unsymmetrical 2,3‐Diaryl‐Substituted Indoles

The direct C H annulation of anilines or related compounds with internal alkynes provides straightforward access to 2,3‐disubstituted indole products. However, this transformation proceeds with poor regioselectivity in the synthesis of unsymmetrically 2,3‐diaryl substituted indoles. Herein, we report the rhodium(III)‐catalyzed C H annulation of nitrones with symmetrical diaryl alkynes as an alternative method to prepare 2,3‐diaryl‐substituted N‐unprotected indoles with two different aryl groups. One of the aryl substituents is derived from NC‐aryl ring of the nitrone and the other from the alkyne substrate, thus providing the indole products with exclusive regioselectivity.     

Rhodium‐Catalyzed CH Annulation of Nitrones with Alkynes: A Regiospecific Route to Unsymmetrical 2,3‐Diaryl‐Substituted Indoles

The direct C? H annulation of anilines or related compounds with internal alkynes provides straightforward access to 2,3‐disubstituted indole products. However, this transformation proceeds with poor regioselectivity in the synthesis of unsymmetrically 2,3‐diaryl substituted indoles. Herein, we report the rhodium(III)‐catalyzed C? H annulation of nitrones with symmetrical diaryl alkynes as an alternative method to prepare 2,3‐diaryl‐substituted N‐unprotected indoles with two different aryl groups. One of the aryl substituents is derived from N?C‐aryl ring of the nitrone and the other from the alkyne substrate, thus providing the indole products with exclusive regioselectivity.     

Copper-catalyzed synthesis of 2-sulfenylindoles from indoline-2-thiones and aryl iodides

A novel and efficient method for synthesis of 2-sulfenylindole via copper-catalyzed coupling reaction of indoline-2-thiones with aryl iodides has been developed. A series of N-substituted and N-free 2-sulfenylindole were obtained in high yields. Furthermore, the method was employed to synthesis of benzothieno[2,3-b]indoles from indoline-2-thiones with 1,2-diiodobenzene in the presence of CuI and Pd(OAc)₂ as catalysts.     

Direct synthesis of 3-arylindoles via annulation of aryl hydroxylamines with alkynes

3-Arylindoles are produced in moderate to excellent yields from the reaction between aryl hydroxylamines and alkynes catalyzed by 10 mol % iron(II) phthalocyanine [Fe(Pc)]. Terminal and internal alkynes afford 3-aryl substituted indoles exclusively. Electron-donating and -withdrawing groups are tolerated on the aryl hydroxylamine. A few bioactive indoles are synthesized as well as several new indoles using this one-step intermolecular annulation procedure.     

Synthesis of tetracyclic indoles via intramolecular α-arylation of ketones

An intramolecular palladium(0)-mediated α-arylation of ketones applied to the synthesis of various substituted tetracyclic indoles is reported. Most significantly, the efficiency of the transformation was enhanced by the use of monoligated Pd(0) complexes. This methodology was extended to double α-arylation of ketones using one-pot reactions with either simultaneous addition or sequential addition of two aryl halides for producing aryl substituted tetracyclic indoles.     

Strategies for the synthesis of 2-substituted indoles and indolines starting from acyclic alpha-phosphoryloxy enecarbamates

Strategies have been developed for the synthesis of 2-substituted indoles and indolines starting from acyclic alpha-phosphoryloxy enecarbamates. A highly chemoselective cross-coupling of N-(o-bromophenyl)-alpha-phosphoryloxyenecarbamates with boron nucleophiles enabled the efficient preparation of various N-(o-bromophenyl)enecarbamates, which served as useful precursors for subsequent Heck-type cyclization or 5-endo-trig aryl radical cyclization to furnish 2-substituted indoles or indolines, respectively.     

Amination reactions of aryl halides with nitrogen-containing reagents mediated by palladium/imidazolium salt systems.

Nucleophilic N-heterocyclic carbenes have been conveniently used as catalyst modifiers in amination reactions involving aryl chlorides, aryl bromides, and aryl iodides with various nitrogen-containing substrates. The scope of a coupling process using a Pd(0) or Pd(II) source and an imidazolium salt in the presence of a base, KO(t)Bu or NaOH, was tested using various substrates. The Pd(2)(dba)(3)/IPr.HCl (1, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) system presents the highest activity with respect to electron-neutral and electron-rich aryl chlorides. The ligand is also effective for the synthesis of benzophenone imines, which can be easily converted to the corresponding primary amines by acid hydrolysis. Less reactive indoles were converted to N-aryl-substituted indoles using as supporting ligand the more donating SIPr.HCl (5, SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene). The Pd(OAc)(2)/SIPr.HCl/NaOH system is efficient for the N-arylation of diverse indoles with aryl bromides. The general protocol developed has been applied successfully to the synthesis of a key intermediate in the synthesis of an important new antibiotic. Mechanistically, palladium-to-ligand ratio studies strongly support an active species bearing one nucleophilic carbene ligand.     

One‐Pot Sequential Propargylation/Cycloisomerization: A Facile [4+2]‐Benzannulation Approach to Carbazoles

A novel one‐pot [4+2]‐benzannulation approach to substituted carbazoles is accomplished by acid‐catalyzed C3‐propargylation of 2‐alkenyl/aryl indoles with 1‐aryl propargylic alcohols, followed by cycloisomerization. A variety of 2‐alkenylated indoles and 2‐aryl/heteroaryl indoles successfully participated in this tandem reaction with 1‐aryl/heteroaryl propargylic alcohols to provide diversely substituted and annulated carbazoles, as well as an aza[5]helicene.     

An efficient,mild and selective Ullmann‐type N‐arylation of indoles catalysed by Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 as heterogeneous and recyclable nanocatalyst

A wide range of N‐arylated indoles were selectively synthesized through intermolecular C(aryl)? N bond formation from the corresponding aryl iodides and indoles through Ullmann‐type coupling reactions in the presence of a catalytic amount of Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 (SBA‐15/AO/Pd(0)) under mild reaction conditions. These cross‐coupled products were obtained in excellent yields under mild conditions at extremely low palladium loading (ca 0.3 mol%), and the heterogeneous catalyst can be readily recovered by simple filtration and reused seven times with loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Solid state N and C NMR study of dioxomolybdenum (VI) complexes of Schiff bases derived from trans-1,2-cyclohexanediamine

The ¹³C, ¹⁵N CP MAS NMR and FT-IR spectra of dioxomolybdenum (VI) complexes of trans-N,N′-bis-(R-salicylidene)-1,2-cyclohexanediamine (R=H, R=3,5-diCl, R=3,5-diBr, R=4,6-diOCH₃), trans-N,N′-bis-(2-OH-naphthylidene)-1,2-cyclohexanediamine and trans-N-(salicylidene)-N′-(2-OH-naphthylidene)-1,2-cyclohexanediamine have been measured. Comparative analysis of the NMR and IR spectra of the complexes with those of the corresponding ligands has shown that the complexation of the di-Schiff bases leads to changes in the conformation of the ligands and the charge redistribution. The asymmetric structure and non-planar structure of the complexes have been suggested.