Molecular beam studies of the F atom reaction with propyne: site specific reactivity

The dynamics of the F atom reaction with propyne (CH(3)CCH) has been investigated using a universal crossed molecular beam apparatus. Two reaction channels have been clearly observed: H+C(3)H(3)F and HF+C(3)H(3). The substitution of F for H occurs mainly via a complex formation mechanism, producing reaction products with some contribution from a direct reaction mechanism. The HF product, however, appears to be dominantly forward scattered relative to the F atom beam direction, suggesting that the HF formation occurs via a direct abstraction mechanism. Branching ratios for the two observed reaction channels are also determined. The H formation channel is found to be the major reaction pathway, while the HF formation channel is also significant. From the measurements of DF versus HF products from the F atom reaction with deuterated propyne, the H atom picked up by the F atom in the reaction with normal propyne seems to come mostly from the CH(3) group. In addition, the H atom produced in the H atom formation channel appears to be mostly from the CH(3) group with some contribution from the CCH group.     

Reaction mechanisms and structural characterization of the reactive intermediates observed after the photolysis of 3-(hydroxymethyl)benzophenone in acetonitrile, 2-propanol, and neutral and acidic aqueous solutions

Nanosecond time-resolved resonance Raman (ns-TR(3)) spectroscopy was employed to investigate the photoinduced reactions of 3-(hydroxymethyl)benzophenone (1) in acetonitrile, 2-propanol, and neutral and acidic aqueous solutions. Density functional theory calculations were utilized to help the interpretation of the experimental spectra. In acetonitrile, the neutral triplet state 1 [denoted here as (m-BPOH)(3)] was observed on the nanosecond to microsecond time scale. In 2-propanol this triplet state appeared to abstract a hydrogen atom from the solvent molecules to produce the aryphenyl ketyl radical of 1 (denoted here as ArPK of 1), and then this species underwent a cross-coupling reaction with the dimethylketyl radical (also formed from the hydrogen abstraction reaction) to form a long-lived light absorbing transient species that was tentatively identified to be mainly 2-(4-(hydroxy(3-(hydroxymethyl)phenyl)methylene)cyclohexa-2,5-dienyl)propan-2-ol. In 1:1 H(2)O:CH(3)CN aqueous solution at neutral pH, (m-BPOH)(3) reacted with water to produce the ArPK of 1 and then underwent further reaction to produce a long-lived light absorbing transient species. Three photochemical reactions appeared to take place after 266 nm photolysis of 1 in acidic aqueous solutions, a photoreduction reaction, an overall photohydration reaction, and a novel photoredox reaction. TR(3) experiments in 1:1 H(2)O:CH(3)CN aqueous solution at pH 2 detected a new triplet biradical species, which is associated with an unusual photoredox reaction. This reaction is observed to be the predominant reaction at pH 2 and seems to face competition from the overall photohydration reaction at pH 0.     

Chloromethylated polystyrene reaction with tris(2-hydroxyethyl)amine. I. Crosslinked polymers prepared by chloromethylated polystyrene with tris(2-hydroxyethyl)amine

A multifunctional crosslinked polymer resulted from a chloromethylated polystyrene reaction with tris(2-hydroxyethyl)amine. A benzyl chloride reaction (chosen as a structural unit model) with tris(2-hydroxyethyl)amine was investigated to explain the reasons for the crosslinking. Amino-ethers and tris(2-hydroxyethyl)amine hydrochloride in addition to ammonium quaternary salt were isolated from this reaction. The formation of amino-ethers proved that an ammonium quaternary salt rearrangement also takes place during the quaternization reaction. This rearrangement leads to chloromethylated polystyrene during its reaction with tris(2-hydroxyethyl)amine.     

Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.     

Quantum chemical simulation of the reaction of methane with gold(I) acetylacetonate and aquaacetylacetonate complexes

The interaction between methane and gold(I) acetylacetonate via electrophilic substitution (reaction (I)) and oxidative addition (reaction (II)) is simulated. In both cases, the formation of the products is thermodynamically favorable: the decrease in energy is 31 kcal/mol for reaction (I) and 26 kcal/mol for reaction (II). The product of reaction (II) is additionally stabilized by Au-H interaction. Both reactions have a low activation barrier and proceed via the formation of structurally different methane complexes reducing the energy of the system by 9.3 kcal/mol for reaction (I) and by 10.9 kcal/mol for reaction (II). The complex [Au(H₂O)(acac)] is also capable of forming methane complexes. These complexes result from a thermally neutral reaction and turn into products after overcoming a low energy barrier. The structure of the complex activating methane in the gold-rutin system is deduced from the data obtained.     

Chimie organométallique: IV. Réversibilité de l'amination des complexes diènes-palladium (II)

An elimination reaction takes place with palladium compounds arising from the reaction of benzylamine with 1,5-cyclooctadiene—PdCl₂ (IV) and 1,5-hexadiene—PdCl₂ (VI) complexes. Evidence for this retroamination reaction is given by the reaction of hydrogen chloride on the cyclooctadiene derivative (V) and by a study of the products resulting from the amination of the hexadiene complex (VI) under various conditions.     

Generalized and facile synthesis of semiconducting metal sulfide nanocrystals

We report on the synthesis of semiconductor nanocrystals of PbS, ZnS, CdS, and MnS through a facile and inexpensive synthetic process. Metal-oleylamine complexes, which were obtained from the reaction of metal chloride and oleylamine, were mixed with sulfur. The reaction mixture was heated under appropriate experimental conditions to produce metal sulfide nanocrystals. Uniform cube-shaped PbS nanocrystals with particle sizes of 6, 8, 9, and 13 nm were synthesized. The particle size was controlled by changing the relative amount of PbCl(2) and sulfur. Uniform 11 nm sized spherical ZnS nanocrystals were synthesized from the reaction of zinc chloride and sulfur, followed by one cycle of size-selective precipitation. CdS nanocrystals that consist of rods, bipods, and tripods were synthesized from a reaction mixture containing a 1:6 molar ratio of cadmium to sulfur. Spherical CdS nanocrystals (5.1 nm sized) were obtained from a reaction mixture with a cadmium to sulfur molar ratio of 2:1. MnS nanocrystals with various sizes and shapes were synthesized from the reaction of MnCl(2) and sulfur in oleylamine. Rod-shaped MnS nanocrystals with an average size of 20 nm (thickness) x 37 nm (length) were synthesized from a 1:1 molar ratio of MnCl(2) and sulfur at 240 degrees C. Novel bullet-shaped MnS nanocrystals with an average size of 17 nm (thickness) x 44 nm (length) were synthesized from the reaction of 4 mmol of MnCl(2) and 2 mmol of sulfur at 280 degrees C for 2 h. Shorter bullet-shaped MnS nanocrystals were synthesized from a 3:1 molar ratio of MnCl(2) and sulfur. Hexagon-shaped MnS nanocrystals were also obtained. All of the synthesized nanocrystals were highly crystalline.     

两种氮杂环丁烷类药物中间体的合成

1-二苯甲基-3-羟基氮杂环丁烷(1)经过对甲苯磺酰氯取代、叠氮化及还原反应合成了药物中间体--1-二苯甲基-3-氨基氮杂环丁烷(4);1经过氧化、氰基化与还原反应合成了1-二苯甲基-3-羟基-3-氨甲基氮杂环丁烷(8).4和8的结构经1H NMR表征.     

Diels-Alder reaction of maldoxin with an isopropenylallene

The Diels-Alder reaction of maldoxin with an isopropenylallene at 60-75 °C afforded an adduct closely related to chloropestolide A (24%) and a second adduct (0-11%) that underwent an ene reaction to generate the chloropupukeanolide D (11-22%) skeleton. The Diels-Alder reaction occurred with good selectively (>5:1) from a single face of maldoxin under much milder conditions than previously reported for the analogous dimethoxycyclohexadienone. Furthermore, the ene reaction took place under mild conditions, whereas the analogous Diels-Alder adduct from the dimethoxycyclohexadienone did not undergo an ene reaction.     

Selective chain reaction of acetone leading to the successive growth of mutually perpendicular molecular lines on the si(100)-(2 x 1)-H surface

The successive growth of mutually perpendicular molecular lines from one dangling-bond (DB) site on the Si(100)-(2 x 1)-H surface has been realized through a substrate-mediated chain reaction at 300 K. Among various molecules, acetone molecules undergo the most facile chain reaction with a DB site, which proceeds selectively on the Si(100)-(2 x 1)-H surface, resulting in only single molecular lines in the parallel-row (parallel to the dimer row) direction. The smaller size and higher reactivity of acetone molecules enable us to successively grow a parallel-row acetone line from the end of a cross-row (perpendicular to the dimer row) allylmercaptan line simply by changing the feed of gas molecules into the reaction chamber. Since the length of a molecular line is controlled by the number of gas molecules impinged, it is possible to turn a chain reaction from the cross-row direction to the parallel-row direction at any desired point on the surface. The reaction path of the adsorbing molecules is discussed. The present study provides a new means of fabricating mutually perpendicular molecular lines through a chain reaction initiating at a preselected DB site on the Si(100)-(2 x 1) surface.     

2-取代吲哚的染料敏化光氧化反应

2-苯基吲哚 (1a) 在甲醇中的染料敏化光氧化反应给出2-苯基-2-(2'-苯基-3'-吲哚基)二氢吲哚-3-酮 (2a) 和2-甲氧基-2-苯基二氢吲哚-3-酮 (4a), 相应N-甲基取代产物由1-甲基-2-苯基吲哚 (1b) 的类似反应获得。发现反应产物分布随吲哚 (1) 的浓度和介质酸度的变化而变化。对反应机理进行了推测, 其中当1a的反应在乙腈中进行时, 分离到了相应的反应中间体: 2-苯基-3H-吲哚-3-酮 (3a)。     

Contribution of the photo-Fenton reaction to hydroxyl radical formation rates in river and rain water samples.

The hydroxyl radical (OH radical) formation rates from the photo-Fenton reaction in river and rain water samples were determined by using deferoxamine mesylate (DFOM), which makes a stable and strong complex with Fe(III), resulting in a suppression of the photo-Fenton reaction. The difference between the OH radical formation rates with and without added DFOM denotes the rate from the photo-Fenton reaction. The photoformation rates from the photo-Fenton reaction were in the range of 0.7 - 45.8 x 10(-12) and 2.7 - 32.3 x 10(-12) M s(-1) in river and rain water samples, respectively. A strong positive correlation between the OH radical formation rate from the photo-Fenton reaction and the amount of fluorescent matter in river water suggests that fluorescent matter, such as humic substances, plays an important role in the photo-Fenton reaction. In rain water, direct photolysis of hydrogen peroxide was an important source of OH radicals as well as the photo-Fenton reaction. The contributions of the photo-Fenton reaction to the OH radical photoformation rates in river and rain water samples were in the ranges of 2 - 29 and 5 - 38%, respectively. Taking into account the photo-Fenton reaction, 33 - 110 (mean: 80) and 42 - 110 (mean: 84)% of OH radical sources in river and rain water samples, respectively, collected in Hiroshima prefecture were elucidated.     

Experimental and computational studies of trialkylaluminum and alkylaluminum chloride reactions with silica

Reactions of trimethylaluminum, triethylaluminum, and diethylaluminum chloride and ethylaluminum dichloride with silica gel have been studied experimentally by infrared spectroscopy and elemental analysis. The silica gel was subjected to different pretreatments to alter surface functionalities prior to reaction. In all cases the extent of surface modification reaction follows the trend unmodified > 600 degrees C pretreated > hexamethyldisilazane (HMDZ) pretreated > 600 degrees C/HMDZ pretreated. All of the aluminum compounds studied completely react non-hydrogen-bonded silanols, while also reacting with hydrogen-bonded silanols and siloxanes. Primarily monomeric surface species result from the surface modification reaction. Ethylaluminum chlorides preferentially react with silanols through cleavage of the Al-C bond rather than the Al-Cl bond. Singly bonded Si(s)-O-AlCl(2) surface species are readily synthesized by reaction of ethylaluminum dichloride with HMDZ-pretreated silica gel. Bridged bonded (Si(s)-O)(2)-AlCl surface species are readily synthesized by reaction of diethylaluminum chloride with HMDZ-pretreated silica gel. Computational ab initio studies of the cluster Si(4)O(6)(OH)(4) as a model to study the reaction of monomeric and dimeric methylaluminum dichloride with a silica silanol are also described. Comparison of the potential energy surface (PES) of monomer and dimer indicates that the energetics favor monomer reaction, consistent with experimental results. The energy cost in the dimer reaction is primarily from cleavage of a bridged Al-Cl bond upon adsorption. This does not occur when the monomer adsorbs. A comparison of the PES for the two reaction pathways resulting from cleavage of either an Al-Cl or Al-C bond indicates that while the former reaction is slightly kinetically favored (E(a) = 23.1 kJ/mol for Al-Cl bond cleavage versus E(a) = 31.1 kJ/mol for Al-C bond cleavage), the latter is strongly thermodynamically favored with an overall free energy difference between the two reaction pathways of 135 kJ/mol favorable to Al-C bond cleavage. These reactions are thermodynamically controlled.     

Reaction Products of Thioanisole with formaldehyde

The acid-catalyzed condensation reaction of thioanisole (I) with formaldehyde was carried out in benzene in the presence of p-toluenesulfonic acid. Two compounds, a dimer (II) and a trimer (III) of thioanisole linked by a methylene group, were isolated from the reaction mixture as main products on the initial stage of this reaction.     

Regioselective synthesis of indoles via reductive annulation of nitrosoaromatics with alkynes

[reaction: see text] Indoles are produced regioselectively and in moderate yields by two new processes: (a) from the [CpRu(CO)2]2-catalyzed reaction of nitrosoaromatics (ArNO) with alkynes under carbon monoxide and (b) in a two-step sequence involving the (uncatalyzed) reaction of ArNO with alkynes, followed by reduction of the intermediate adduct.     

Kinetic explosion and bistability in adsorption and reaction of acetic acid on Pd(110)

The adsorption and reaction of acetic acid with Pd(110) have been studied using thermal molecular beam reaction measurements and temperature-programmed desorption. Acetic acid adsorption results in the formation of acetate species which decompose to produce coincident CO(2) and H(2) desorption from the surface. C is deposited on the surface from the dehydrogenation of the methyl group. In combination, these steps are found to exhibit unusual kinetics including (i) a "surface explosion" during heating and (ii) bistability in the reaction profile for heating and cooling curves. This is the first report of such behaviour for a complex system during in situ reaction.     

Formation and decomposition of C3 metallacycles from ethylene and methylene on MoAl alloy thin films

The reaction between adsorbed ethylene and methylene species has been investigated on a molybdenum-aluminum alloy grown from Mo(CO)(6) on a planar alumina film formed on a Mo(100) single crystal in ultrahigh vacuum. Di-sigma-bonded ethylene reacts with carbene species, formed on the surface from methylene iodide, to form a C(3) metallacycle. This predominantly decomposes to yield propylene, while a smaller portion yields cross-metathesis products since (12)C(13)CH(4) is formed from reaction between (13)C(2)H(4) and (12)CH(2). This work demonstrates for the first time that the reaction proceeds in heterogeneous phase via a C(3) metallacycle as proposed in the Hérisson-Chauvin mechanism.     

Ultrafast photosynthetic reduction of elemental sulfur by Au nanoparticle-loaded TiO2

Nanometer-sized gold particles with varying mean size from 3.2 to 12.2 nm were loaded on the surfaces of TiO2 particles in a highly dispersed state with the loading amount maintained constant (0.46 +/- 0.02 mass %) using the deposition-precipitation method. Light irradiation (lambda(ex) > 300 nm) to a deaerated ethanol TiO2 particle suspension containing elemental sulfur (S8) led to the energetically uphill reduction of S8 to H2S. It has been found that this reaction is dramatically enhanced with such a low level of Au loading on TiO2 and that the zero-order rate constant of reaction increases with decreasing mean size of Au nanoparticles (d). The effects of reaction parameters (substrate concentration, light intensity, temperature) on the rate of reaction were studied to infer the essential reaction mechanism. Further, a kinetic analysis has led to a conclusion that the increase in the rate of reaction with decreasing d results from the improvement of the charge separation efficiency.     

Dipole interaction-controlled stereoselectivity in aldol reaction of alpha-CF3 enolate with fluoral

The stereoselectivity of a reaction is generally determined by minimizing steric repulsion. However, the aldol reaction of alpha-CF(3)-ketone (Z)-enolate with fluoral anomalously gave an anti-aldol through a sterically demanding transition state, because of the strong dipole interaction of the two CF(3) groups. We have thus disclosed a paradigm shift from steric to electronic control of reaction stereoselectivity. [reaction: see text]     

Thermal decomposition of CF3 and the reaction of CF2 + OH --> CF2O + H

The reflected shock tube technique with multipass absorption spectrometric detection (at a total path length of approximately 1.75 m) of OH-radicals at 308 nm has been used to study the dissociation of CF3-radicals [CF3 + Kr --> CF2 + F + Kr (a)] between 1,803 and 2,204 K at three pressures between approximately 230 and 680 Torr. The OH-radical concentration buildup resulted from the fast reaction F + H2O --> OH + HF (b). Hence, OH is a marker for F-atoms. To extract rate constants for reaction (a), the [OH] profiles were modeled with a chemical mechanism. The initial rise in [OH] was mostly sensitive to reactions (a) and (b), but the long time values were additionally affected by CF2 + OH --> CF2O + H (c). Over the experimental temperature range, rate constants for (a) and (c) were determined from the mechanistic fits to be kCF3+Kr = 4.61 x 10-9 exp(-30,020 K/T) and kCF2+OH = (1.6 +/- 0.6) x 10-10, both in units of cm3 molecule-1 s-1. Reaction (a), its reverse recombination reaction reaction (-a), and reaction (c) are also studied theoretically. Reactions (c) and (-a) are studied with direct CASPT2 variable reaction coordinate transition state theory. A master equation analysis for reaction (a) incorporating the ab initio determined reactive flux for reaction (-a) suggests that this reaction is close to but not quite in the low-pressure limit for the pressures studied experimentally. In contrast, reaction (c) is predicted to be in the high-pressure limit due to the high exothermicity of the products. A comparison with past and present experimental results demonstrates good agreement between the theoretical predictions and the present data for both (a) and (c).