Diastereoselective tandem addition-cyclization reactions of unsaturated tertiary amines initiated by photochemical electron transfer (PET)

Polycyclic molecules and tetrahydroquinoleines were obtained in a tandem reaction involving the diastereoselective addition of alpha-aminoalkyl radicals to (5R)-5-menthyloxy-2[5H]-furanone 1. The facial diastereoselectivity on 1 is >/=90%. The alpha-aminoalkyl radicals were produced from tertiary amines by photochemical-induced electron transfer. When N,N-dialkylanilines 19 were used as starting tertiary amines, a rearomatization step was involved and important side reactions of 1 were observed. A mechanistic study involving isotopic labeling of the starting amine indicated that the byproducts resulted from reduction of 1 during the rearomatization process. An efficient optimization of the reaction was obtained by simply adding acetone or cyclopentanone as mild oxidants to the reaction mixture. The side products resulting from reduction of the furanone 1 were completely suppressed under these conditions, and the yields of the tetrahydroquinolines 21a-i, 22a-f, and 26g-i were doubled.     

The influence of chemical modification of unsaturated polyesters on viscoelastic properties and thermal behavior of styrene copolymers

The influence of chemical modification of unsaturated polyesters on viscoelastic properties and thermal behavior of styrene copolymers has been investigated by DMA and TG analyses. Chemical modification of unsaturated polyesters obtained in polycondensation of cyclohex-4-ene-1,2-dicarboxylic anhydride (THPA), maleic anhydride (MA) and suitable glycol: diethylene glycol (DEG) or triethylene glycol (TEG) was performed using 38–40% peracetic acid. It allowed to selective and successful oxidation of carbon-carbon double bonds in unsaturated polyesters giving modified unsaturated polyesters/unsaturated epoxypolyesters/containing both carbon-carbon double bonds in polyester chain and new functional groups-epoxy groups in cycloaliphatic rings. Both unsaturated polyesters and unsaturated epoxypolyesters were used as a component of styrene copolymers cured with different hardeners. It has been demonstrated that the use of modified unsaturated polyesters as a component of styrene copolymers allowed obtaining more stiffness and more cross-linked network structure compared to styrene copolymers based on unmodified polyesters. The higher values of storage modulus, glass transition temperatures and better thermal stability for styrene copolymers based on unsaturated epoxypolyesters were obtained.     

Studies on the cure reaction and thermal properties of NADIC/phthalic anhydride modified unsaturated (epoxy) polyesters

In pseudo bi-component separated-stage model (PBSM), the effect of the TG value at separation points on the kinetic parameters is studied by residual and theoretical analysis. Simultaneously, a new method to determine the point that is the end of 1st reaction or the initial of 2nd reaction is developed. The investigations have improved the calculation procedure of PBSM. We performed thermogravimetry (TG) analysis on oil tea wood with two-step consecutive model and parallel model. Comparison between the results of the two models and improved PBSM shows well agreements. The influence of different separation points on kinetic parameters is presented.     

In situ FTIR and DSC investigation on cure reaction of liquid aromatic dicyanate ester with different types of epoxy resin

Cure reactions of a liquid aromatic dicyanate ester [1,1′‐bis(4‐cyanatophenyl) ethane, DiCy] associated with a liquid cycloaliphatic epoxy ester (3,4‐epoxycyclohexylmethyl‐3,4‐epoxycyclohexane‐carboxylate, EPC) and with liquid bisphenol A epoxide [2,2‐bis(4‐glycidyloxyphenyl)propane, EPA] were studied through a cross‐reference between in situ FTIR and DSC dynamic scanning. DiCy can act here as a latent catalyst to cure EPC and EPA resins. Reaction mechanisms were found to be different for both curing systems (EPC/DiCy and EPA/DiCy). Two significantly separated exotherms were observed in the DSC thermograms in each system. The reaction mechanism of the EPA/DiCy system was found to follow mainly Bauer pathways. We postulate a new sequence of the mechanism in this system due to the presence of an oxazoline structure during the progression of the curing process. In the curing system of EPC/DiCy, however, another five principle reaction paths, rather than Bauer pathways, are suggested: (1) polycyclotrimerization of DiCy, (2) formation of oxazoline, (3) insertion of EPC into cyanurate, (4) formation of tetrahydro–oxazolo–oxazole, and (5) ring cleavage and reformation of oxazoline to form the insertion structure of cyanurate. The lower temperature peak in the DSC thermogram is primarily contributed by the former three reaction paths, whereas the higher temperature peak can mainly be attributed to the reaction paths 4 and 5. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2934–2944, 2000     

The heterogeneity of the network structure of epoxy polymers studied by dynamic and DSC tests

The final network structure of epoxy polymers cured with a crosslinking agent is strongly connected with the type and amount of the curing agent and conditions. Concerning the morphology of this network, it has been reported that cured epoxies are two-phase systems, containing roughly spherical floccules arranged in a matrix resembling the constituent phases. In this paper and by using an epoxy-polymer cured with different amounts (i.e., different than the stoichiometric one) of a curing agent, strong indications of their network-structure heterogeneity have been disclosed. For this study, two different experimental techniques, such as dynamic mechanical measurements and DSC tests have been utilised. It was found that cured epoxy-polymers consist of two extreme regions, with low and high crosslink densities, whose volume fractions have been estimated by using a mechanical model applicable for two-phase systems.     

Structure of unsaturated polyester resins crosslinked with styrene as studied by raman spectroscopy

An unsaturated polyester resin and the styrene-crosslinked polyester were studied with laser Raman spectroscopy. Following the polyesterification reaction, Raman measurements showed that the polyester contained 55% fumarate and 45% maleate unsaturation. Additionally, the glycol fragment was indicated to exist as the gauche isomer. The 1213 cm^?1 line is assigned to the glycol-ester linkage and can be measured to follow the conversion to polymer. After the crosslinking reaction, styrene was found to copolymerize preferentially with the fumarate unsaturation. There was no evidence of forming long-chain polystyrene crosslinks. Our results indicate that, after crosslinking, 41% of the fumarates have reacted with styrene and there is an average of two styrene molecules in each link.     

Curing of epoxy oligomers by the eutectic mixture of aromatic amines

Kinetics of curing of structurally different epoxy oligomers (ED-20 and PDI-3AK resins) in a mixture with other low-molecular-weight epoxy oligomers and plasticizers by the eutectic mixture of aromatic amines UP-0638/1 is studied by the DSC method. The activation energy and the heats of curing reactions are determined. It is established that crosslinked epoxy polymers cured at moderate temperatures (40–80°C) are strong moisture-resistant compositions with different mechanical characteristics. Plasicized elastomers based on PDI-3AK resin with glass transition temperatures of ?78 and ?95°C are freeze-and heat-resistant materials.     

叔胺存在下的反常Reimer-Tiemann反应

经典的Reimer-Tiemann反应的主要产物为邻位羟基取代苯甲醛类化合物,对位羟基取代苯甲醛类化合物为次要产物,其量甚少.在叔胺存在下,可使Reimer-Tiemann反应产物中对位羟基取代苯甲醛类化合物为主要产物,相应的邻位产物则成为次要产物,称这种反应为反常Reimer-Tiemann反应.本文对反常Reimer-Tiemann反应的反应条件进行探讨,并提出了反应机理.     

Anionic polymerization and copolymerization of acrylonitrile initiated by systems based on bicyclic tertiary amines and ethylene oxide

It is shown that the products of interaction of ethylene oxide and bicyclic amines containing tertiary nitrogen atoms at the tops of bicyclic structures efficiently initiate the anionic polymerization of acrylonitrile. As opposed to all known initiators of this process, the mentioned initiating systems contain no metal atoms or atoms of elements heavier than oxygen. The polymerization of acrylonitrile under the action of the ethylene oxide–bicyclic amine system in a polar medium (dimethyl sulfoxide) at room temperature occurs in the homogeneous regime over several minutes, while, in a weakly polar solvent (tetrahydrofuran), polymerization occurs in the heterogeneous regime over several hours. The reaction may become homogeneous in a mixture of these solvents at both room temperature and a lower temperature. The number-average molecular masses of the polymers, depending on polymerization conditions, are in the range from 25 × 10³ to 480 × 10³ and their polydispersity indexes are from 1.55 to ~3.40. It is found that the copolymers of acrylonitrile with oxygen-containing acrylic monomers, as well as with ethylene oxide, can be prepared.     

The dispersion polymerization of unsaturated monomers initiated by the macromonomeric initiator

The dispersion polymerizations of styrene (St) and methyl methacrylate (MMA) initiated by poly(oxyethylene) macroinimer (PEO-MIM) in ethanol/water were investigated at 50, 60 and 80°C. The polymerisation rate vs. conversion dependence was described by with a maxim at the beginning of polymerisation. Polymerization was faster with MMA than with St. The limiting conversion was inversely proportional to temperature and was much more pronounced with St. The rate of polymerization increased with temperature. The overall initial activation energy increased with conversion and reached value ca. 25 kJ.mol⁻¹ for MMA and 50 kJ.mol⁻¹ for styrene at ca. 60% conversion. The particle size was observed to decrease with increasing the macroinimer concentration. The polymer dispersions were unstable and a large amount of coagulum appeared during the polymerisation especially in the styrene-containing reaction system.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation of aromatic polyesters by the direct polycondensation reaction with diphenyl chlorophosphate in pyridine

The direct polycondensation reaction of diphenyl chlorophosphate (DPCP) as a new condensing agent in pyridine was used for the preparation of polyarylene esters. High-molecular-weight polymers can be prepared by reacting a pyridine solution of dicarboxylic acids and DPCP in the presence of LiCl, followed by treating with a pyridine solution of bisphenols. About an equivalent of LiCl, and 30 mol % excess of DPCP were most favorably added. Effects of the initial reaction of the acids and DPCP, and of dropwise addition of bisphenols on the polycondensation were investigated. Polycondensations of several hydroxybenzoic acids were also carried out with limited success.     

Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

A systemic study of the impact of aromatic substitution on the reaction rate and network properties of the isomers of a tetraglycidylaniline triphenyl ether epoxy resin cured with anhydride hardeners is presented here. The epoxy resins synthesized in this work were based upon N,N,N,N‐tetraglycidyl bis(aminophenoxy)benzene (TGAPB), where the glycidyl aniline and ether groups change from being all meta (133 TGAPB), to meta and para (134 TGAPB), and finally to an all para substituted epoxy resin (144 TGAPB). Increasing para substitution increased reaction rate, promoted the onset of vitrification and increased epoxide conversion. Thermal properties such as glass transition temperatures (T_g) and coefficients of thermal expansion (CTE) both increased consistently with increasing para substitution, although thermal stability as measured via thermogravimetric analysis decreased. Mechanical properties also varied systematically with flexural strength and ductility increasing with increased para substitution, while the modulus decreased. Indeed, the ductility almost doubled, as measured by the work of fracture and displacement at failure highlighting the importance of substitution on properties.     

镍催化多氟烷基溴化物与叔胺的反应研究

本文报导了氟烷基溴化物与叔胺在Ni催化剂存在下的反应, 溴化与叔胺在零价Ni配合物存在, 室温下能生成氟烷基烯胺, 并证明溴化物与碘化物是按同一机理进行反应的, 即通过电子转移而引发的一个自由基反应过程。     

Effect of plasticization by amines on the physical properties of an acidic styrene copolymer

The dynamic mechanical properties of partly sulfonated (8.1 mole%) polystyrene were investigated at a frequency of ca. 1 Hz, following neutralization with various low molecular weight flexible and rigid amines. IR spectroscopic evidence suggested that the protonated amine units were possibly H-bonded to the sulfonate anion. Neutralization with flexible amines was found to result in a decrease in the glass transition temperature T_g by an amount proportional to the number of carbon atoms in the amine, while neutralization with rigid amines was found to result in an increase in T_g. It was also observed that the amines were more miscible with the sulfonated material than with polystyrene. It was concluded that the changes in properties observed upon neutralization are similar to those expected from a graft.