土木香内酯的电化学研究

用单扫示波极谱法，在０１ｍｏｌ／ＬＬｉＣｌ中，土木香内酯有两个极谱还原波：Ｐ１（－１４１Ｖ）和Ｐ２（－１５１Ｖ）（ｖｓ．ＳＣＥ），峰Ｐ１的峰高与浓度在４３×１０－７～１２×１０－６ｍｏｌ／Ｌ和１３×１０－６～１５×１０－５ｍｏｌ／Ｌ范围内呈线性关系，可进行定量分析，用标准加入法能作定性分析，其检测限为２６×１０－７ｍｏｌ／Ｌ。测定了中药土木香中总内酯的含量，其结果令人满意。实验证明土木香内酯的电极过程为带有吸附性的不可逆的逐级电子反应过程，另外，还证明了Ｈ２Ｏ２可催化峰Ｐ１和羟基自由基可催化峰Ｐ２，讨论了土木香内酯清除由邻苯三酚自氧化产生的活性氧自由基（Ｏ－·２）的作用。     

镓(Ⅲ)-向红菲咯啉络合物极谱吸附波的研究及应用

在 ＰＨ＝４．２的 ０．０７ ｍｏｌ／Ｌ ＨＡｃ－ＮａＡｃ介质中，Ｇａ（Ⅲ）－向红菲咯啉络合物在单扫描极谱仪上于－０．９８ Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附还原波，其二阶导数波灵敏度高，波形好，峰电流 Ｉｐ与 Ｇａ（Ⅲ）在 ８．０×１０－８～３．０× １０－６ｍｏｌ／Ｌ的浓度范围内呈现良好线性关系，检出限为７．０×１０－８ｍｏｌ／ＬＧａ（Ⅲ）。用该法对粮食中的镓进行了测定，并对电极过程进行了研究。     

扑尔敏的示波极谱测定

在０．１ｍｏｌ／Ｌ的Ｈａｃ－ＮａＡｃ缓冲溶液中，扑尔敏于—１．３６Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的极谱还原波，导数波高与扑尔敏在２．０×１０~（－６）～８．０×１０~（－５）ｍｏｌ／Ｌ浓度范围内成线性关系，检测下限达６．０×１０~（－７）／ｍｏｌ／Ｌ。对极谱波的性质进行了探讨，并用该法测定了速效伤风胶囊中扑尔敏的含量。     

铟(Ⅲ)-7-(1-苯偶氮)-8-羟基喹啉-5-磺酸钠的配位吸附波及其应用

在ｐＨ４．５的 ０．０１５ ｍｏｌ／Ｌ ＨＡｃ－ＮａＡｃ介质中，Ｉｎ铟（Ⅲ）－７－（１－苯偶氮）－８－羟基喹啉－５－磺酸钠（ＢＱ）在滴汞电极上于－０．６６５－０．７０ Ｖ（ｖｓ．ＳＣＥ）电位处得到络合物的吸附还原波，其一阶导数峰电流Ｉ＇ｐ与Ｉｎ（Ⅲ）浓度在４．０× １０~（－８）～３．５ × １０~（－６）ｍｏｌ／Ｌ范围内呈良好的线性关系，检测限为１．６ × １０~（－８）ｍｏｌ／Ｌ Ｉｎ（Ⅲ）．应用该法测定了铅粉和氢氧化铝样品中的微量铟，结果令人满意。对电极反应机理进行了探讨。     

铟（Ⅲ）—向红菲Luo啉络合物极谱吸附波的研究

在ｐＨ＝３．８的磷酸－柠檬酸盐缓冲体系中，铟（Ⅱ）－向红菲Ｌｕｏ啉络合物在单扫描示波极谱仪上于－０。６７Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附还原波，其二阶导数波灵敏度高，波形好。峰电位Ｉ″ｐ与铟（Ⅲ）浓度在２．０×１０＾－８￣２．０×１０＾－６ｍｏｌ／Ｌ范围内呈良好的线性关系，其检测限为８×１０＾－９ｍｏｌ／Ｌ铟（Ⅲ）。该法用于试剂氧化锌和镀膜玻璃中铟（Ⅲ）的测定，结果较好。     

铟（Ⅲ）—2—硫基苯骈噻唑—7—碘—8—羟基喹啉—5—磺酸三元络合物吸附波研究

在ＨＣｌ－ＮａＡｃ介质（ｐＨ２．５）中，用单扫示波极谱法可获得高灵敏的Ｉｎ（Ⅲ）－２－巯基苯骈噻唑（ＭＢＴ）－７－碘－８－羟基喹啉－５－磺酸（Ｆｅｒｒｏｎ）三元络合物吸附波，峰电位在一－０．６４Ｖ（ｖｓ．ＳＣＥ），峰电流与铟浓度在７．０×１０＾－１０ｍｏｌ／Ｌ～８．８×１０＾－７ｍｏｌ／Ｌ之间呈线性关系，检出限可达３．０×１０＾－１０ｍｏｌ／Ｌ，测得电活性络合物的组成为Ｉｎ（Ⅲ）：ＭＢＴ：１∶１∶     

镓－茜素紫极谱络合吸附波的研究

在含有０．０５ｍｏｌ／ＬＨＡｃ－ＮａＡｃ（ｐＨ５．６）、０．１ｍｏｌ／ＬＫＣｌ和１．５×１０￣（－５）ｍｏｌ／Ｌ茜素紫的溶液中，镓（Ⅲ）－茜素紫络合物在单扫示波极谱仪上产生一灵敏的导致极谱波，峰电位在－１．１１Ｖ（ｖｓ．ＳＣＥ），峰电流与镓（Ⅲ）浓度在２．０×１０￣（－８）～２．０×１０￣（－６）ｍｏｌ／Ｌ范围内呈线性关系，检测限达１×１０￣（－８）ｍｏＬ／Ｌ机理研究表明，峰电流是由吸附在电极表面的络合物中的中心离子和配位体同时还原而产生的。方法已应用于铝合金中镓的测定，结果满意。     

镓—茜素紫极谱络合吸附波的研究

在含有０．０５ｍｏｌ／Ｌ ＨＡｃ－ＮａＡｃ（ｐＨ５．６）、０．１ｍｏｌ／Ｌ ＫＣＬ和１．５×１０＾－５ｍｏｌ／Ｌ茜素紫的溶液中，镓（Ⅲ）－茜素紫络合物在单扫示波极谱仪上产生一灵敏的导数极谱波，峰电位在－１．１１Ｖ（ｖｓ．ＳＣＥ），峰电流与镓（Ⅲ）浓度在２．０×１０＾－８ｍｏｌ／Ｌ。机理研究表明，峰电流是由吸附在电极表面的络合物中的中心离子和配位体同时还原而产生的。方法已应用于铝合金中镓的测定，结果     

吸附络合物体系的示波分析

Ｉｎ（Ⅲ）在ｐＨ４５７ＨＡｃＮａＡｃ０．１％ＶＣ０．０６％ＨＣｕＰ溶液中，用示波计时电位法可获得良好示波图，其切口电位为Ｅ＝０９０（Ｖｓ．ＳＣＥ），切口高度与Ｉｎ（Ⅲ）浓度在８００×１０－７～１４×１０－５ｍｏｌ／Ｌ范围内成正比，检出限可达５０×１０－７ｍｏｌ／Ｌ吸附络合物组成为Ｉｎ（Ⅲ）：铜铁试剂（ＨＣｕｐ）＝１∶１，条件稳定常数为５９×１０３     

铜—腺嘌呤络合物吸附波的研究

了在０．０８ｍｏｌ／ＬＮａＡｃ～０．０２ｍｏｌ／ＬＨＡｃ缓冲溶液铜与腺嘌呤（Ａｄｅ）络合物的极谱行为，结果表明，扫描电压为－０．２Ｖ～－０．７Ｖ时铜－腺嘌呤络合物在单扫示波极谱上有一络合物吸附波，其一阶导数峰电位主－０．４Ｖ（ｖｓ．ＳＣＥ），腺嘌呤浓度在１．０×１０＾－６～１．０×１０＾－５ｍｏｌ／Ｌ范围内与一阶导数波高呈良好的线性关系，检出限为１．０×１０＾－７ｍｏｌ／Ｌ，实验证明，该峰具有吸附     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.